Used Combine Harvester for sale (3,356)

Condition: new, both working tables open at the same time! working width 410 mm cutter block DM 95 mm knife dimensions 410 x 30 x 3 max. chip removal 5 mm working table length 2200 mm thicknesses table dim. 410 x 775 mm feed speed 6/12 m/ min min. ÷ max. work piece height 3 ÷ 240 mm Motorleistung 5,0 kW, 400V, 50 Hz incl. options: "Tersa”-cuter block Ø 95 mm, with 4 pcs knifes auxiliary fence for small work pieces Ihedpfx Aodvn Hwjg Ust electric height adjustment for thicknessing table with digital readout

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2023 Approximate dimensions: Length: 2,300 mm Width/Depth: 1,100 mm Weight: 980 kg Total table length: 2,300 mm Infeed table length: 1,200 mm Working height: 930 mm Maximum cutting depth: 6 mm Fence length: 1,200 mm Ihjdpfxextgz Ee Ag Uot Fence height: 190 mm Fence tilting range: 90° - 45° Thicknesser extraction port diameter: 120 mm Main motor: 7 kW Space requirement length: 2,300 mm Space requirement width/depth: 1,610 mm Space requirement explanation: The dimensions include maximum travel paths or usable lengths. Machine body length: 1,235 mm Machine body width/depth: 850 mm Length: 1,000 mm Width: 3,500 mm Note on working area: Please add the specified dimensions to the space requirement to determine the recommended clear installation area for the machine. Minimum working height: 3.5 mm Maximum working height: 250 mm Maximum cutting depth: 8 mm Connection voltage: 400 V Phases: 3-phase Current type: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planer knives: 4 pcs Speed: 5,000 rpm Maximum planing width: 520 mm Feed speeds: 5/8/12/18 m/min Availability: short-term Location: Solingen

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, TERSA cutterhead with 4 knives, 5.5 kW motor, 400 V, 50 Hz, electronic start and brake unit. Thickness table adjustment with buttons for rapid or slow feed, as well as fine adjustment accurate to 1/10 mm. Integrated operating hours counter. Thickness table mounted on 4 support spindles and 4-way guided. Two feed speeds: 7 and 14 m/min. One rubber feed-in and one rubber feed-out roller. Two extraction ports Ø 160 mm. Slide for top extraction. Planer guard system SUVAMATIC. Motor power 7.5 kW. Positioning control including sensor monitoring. Isdpfox Ey Tzjx Ag Ueht

Condition: like new (used), Year of construction: 2017, operating hours: 10,000 h, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 400 mm, control cabinet height: 2,000 mm, rotational speed (min.): 1,500 rpm, total height: 2,000 mm, total length: 6,000 mm, total width: 1,500 mm, overall weight: 3,000 kg, type of cooling: water, warranty duration: 12 months, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), For sale is a Spanner RE2 Facelift wood gasifier with CHP unit (BHKW). Large reformer and lock with IR sensors. Everything has been fully overhauled and is ready for operation. The plant can be inspected in Brixen / South Tyrol. Ihjdpfx Aexuqpvsg Ust

Condition: used, Year of construction: 2015, operating hours: 82,000 h, functionality: fully functional, type of input current: AC, power: 220 kW (299.12 HP), input voltage: 400 V, rotational speed (min.): 1,500 rpm, empty load weight: 12,500 kg, For sale: Biogas CHP unit (BHKW) Fully functional CHP unit in container (dimensions: LxWxH = 7x3x3 meters, excluding the rooftop fan, weight: 12.5 tons) The unit will be decommissioned once the two new CHP units are operational, approximately summer 2026. The CHP was operated under a service contract with IWK. The last major overhaul (turbo, pistons, liners, heads, catalyst) was carried out in May 2025 at 77,500 operating hours. Service is performed every 2,000 hours. Ihedpfx Agsx A A Sfj Ust The unit can be inspected on site and in operation. The CHP is sold as-is, without warranty, ex location. Transport costs to be borne by the buyer.

Condition: good (used), Lot combined duoburners, gas and oil operated Fabr.: Steinmüller, Type 1: G-18-K 1120/800, Type 2: DAG-18-K 1120/800, Year of manufacture: 1996, burner data natural gas burner: heat output GT operation 43.6 MW, calorific value 40.09 MJ/kg, fuel mass flow 1.089 kg/s, control range 1:8, pmax.: approx. 1.500 Pa, exhaust gas temperature 424 degrees, (8 pieces), burner data for dual oil burners: calorific value 42MJ/kg, fuel oil throughput 4,600 kg/h, max. pressure before burner 13 bar, burner operating range 1:5, max. oil pressure at takeover 18 bar, temperature before burner 240 degrees, (8 pieces), Remark: Burner must be dismantled by customer. The burners can also be purchased separately. Isdpfxod S R Inj Ag Ueht

Condition: new, - extra long - one piece - planing tables (2250 mm) from cast iron - simultaneous opening and closing of planer tables with locking system - heavy duty industrial style main motor - fixed suction hood - planer fence dimension 1200 x 150 mm with small parts fence - feeder with 4 feed speeds and separate motor - thicknesser table mounted on 4 solid spindles and linear guides - high quality steel anvil roller - rubber coated outfeed roller - digital display of thicknessing height - autom. star triangle switch techiscal data: total planer table lenght 2250 mm max. working width 520 mm max. chip removal 5 mm dimensions thicknessing table 850 x 520 mm min/max. working height 3/ 240 mm feed speeds 5/ /8 /12/ 18 m/min Ihodpfx Agscq E Uus Ujt planer head dimension 120 mm/ incl. 4 pcs HSS cutter knifes planer head speed 5000 1/min main motor 400 V/50 Hz/S6 - 40 % 7,0 kW suction hood dimension 1 x 120 mm weight approx. 650 kg - "Teresa"-cutter block Ø 120 mm, mono block, with 4 knifes - additional fence for small work pieces - motorised height adjustment for thicknesser table with digital read out - thicknesser table with 2 rollers

Condition: excellent (used), Year of construction: 2020, For sale is a used Hammer C3-31 4-function combination machine with a cutting length of 1300mm. The machine is in very good condition and has been serviced and inspected by our specialist staff. Technical data: - Cutting length: 1300mm Isdsxxi Dtepfx Ag Uoht - Cutting width: 650mm - Cutting height: 103mm - 4 milling speeds - Directional switch - Silentpower spiral cutter block - Planing length: 1400mm - 3 motors, each 3kW - Year of manufacture: 2020 The machine is located in A-5431 Kuchl and can be inspected by appointment during our business hours. Subject to prior sale! Related terms: combination machine, combined machine, planer, thicknesser, thicknessing machine, circular saw Reference: R-L0B8S

Condition: new, Year of construction: 2024, Combined Exposure Unit, Model 4, 120x145, 3.5kW Ihsdpoh Tym Ijfx Ag Uet Max. screen size: 120x145cm, floor space: approx. 250x 190cm, MH quick-start lamp: 3.5kW, connection: 400V/50cycles, CEE-plug, 32ampere. consisting of steel-tube support with storage board, with 4retractable drawers, with pull-out rails for various sizes of screens, vacuum copying frame with flexible rubber blanket on top, easier lifting of the glass upper frame by gas springs, height-adjustable cross-beam on top with hanging MH exposure lamp model AKTICOP S as well as UV-protection curtain, with light dosing device model AKTITRON S16E, 16programs, equipped with light sensor at the copying frame. Control board at the drying cabinet with vacuum gauge, vacuum reducing valve, operating and control elements.

Condition: used, Technical details: round bar steel: 32 mm square edge steel: 30 angle steel: 90 x 8 mm flat steel: 100x18 mm Knife length: 220 mm number of cutting strokes max.: max. 30 Hübe/min p.Min. voltage: 220/380-50 V rated current: 15,8/8,55 connected load: 4,8 kW weight of the machine ca.: ca. 1,1 t Dimensions (LxWxH): 0,8 x 1,2 x 1,3 m Ihsdpfsu Icghjx Ag Uot Capacity: - Steel sheet: 16mm - Flat steel: 100 x 18mm - T profile: at 45°: 65 x 7mm, right angle: 90 x 8mm. Machine is in working condition *

Condition: used, No. 04493 Combined machine Steko 228 P.B.S. Pressing - Sanding - Sawing Used - Pneumatic veneer press with electric heating Aluminium heating plates 2280 x 1000 mm LW Lower plate extendable Opening width approx. 145 mm Total pressing pressure 40 tons, specific pressing pressure max. 2 kg/cm2 Heating 2x 1,8 kW - Long belt sander 3 kW Table 2600 x 750 mm LW, extendable Sanding height 200 mm Belt length 6800 mm Belt width 120 - 150 mm Left/right rotation, speed 19 m/s - Sliding table saw / veneer saw / edging saw 2.2 kW With pneumatic pressure beam Cutting length approx. 2600 mm, cutting height adjustable 0 - 60 mm Saw blade diameter max. 250 mm With chain feed - Extraction for sander and saw 0.55 kW Ihjdpfoxl Ha Ssx Ag Uet Delivery rate approx. 11 m3/min Push-button control with main and emergency stop switches Machine on trolley Installation footprint according to manufacturer 7.5 m2 Transport dimensions approx. 3900 x 2100 x 1400 mm LWH Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 1993, functionality: fully functional, Panel saw, spindle moulder, combination machine, table saw, circular saw, carpenter’s saw, panel dividing saw, table router, tilting spindle moulder FELDER Model: KFS37 FL Year: 1993 Sliding table length: 245 cm Manual height adjustment of the saw blade Manual tilting of the saw blade up to 45° Rip fence with fine adjustment, up to approx. 75 cm Outrigger table with extendable crosscut fence Mitre fence Main motor power: 3 kW Tilting spindle moulder Manual height adjustment of the tilting spindle Manual tilting of the moulder spindle up to 45° to the rear Spindle diameter: 30 mm 3 spindle speeds, adjustable via belt Spindle can be lowered below table level and removed Spindle moulder motor power: 3 kW Ihjdjxycy Rjpfx Ag Uet Cutter fence with fine adjustment and parallel guidance—Felder multi-adjustment system Fold-away support for power feeder Eccentric workpiece clamp Prior inspection is expressly recommended; please leave your telephone number by email and I will contact you to arrange a viewing appointment. Subject to prior sale. All information provided without guarantee. Machines can be collected in person or shipped by freight at the buyer’s expense. Loading and packaging can be organised by us. The quoted shipping costs are indicative; actual costs may vary depending on location and unloading facilities, please enquire. The item is offered under differential taxation. The displayed sales price is the gross final price. An invoice showing VAT separately will not be issued. Basis of warranty: Due to age and wear, sale is exclusively to commercial buyers with no warranty, guarantee, or return the claim. All information is without guarantee. By placing a bid, the buyer acknowledges this. For used items, warranty is 12 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, all warranties are excluded. For new items, warranty is 24 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, the warranty is 12 months.

Condition: used, Year of construction: 2003, round bar steel 30 mm Iedpfx Agjr Erwls Ujht square edge steel 25 mm L-beam 80 x 80 x 8 mm 200 x 13 / 350 x 6 mm 40 t throat 175 mm work stroke 32 mm work height max. 980 mm hole diameter in sheet thickness 20 x 15 / 38 x 8 mm total power requirement 3,0 kW weight of the machine ca. 0,62 t Dimensions (LxWxH) 1,0 x 0,8 x 1,3 0 Profile steel scissors with - 1 foot trigger - Support tables - Rectangular notcher - Hole punch including tools

Condition: used, Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/A Machine. No. 9566 Year of construction approx. 2000 Punching force 80 ton. throat 300 mm Punching up to Ø 40 mm in 14 mm sheet metal Flat material shears 450 x 15 mm Isdpfx Ajrz Tuteg Ujht Angle steel shears 130 x 130 x 13 mm Square shears 45 x 45 mm Round material shears Ø 45 mm Rectangular notcher up to 12 mm Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Fence with el. stroke release 500 mm - Work table with stop for punching device 550 x 380 mm - Working height of the punching device 1100 mm - Work table with stop for the rectangular notcher 550 x 400 mm - Working height of rectangular notcher 930 mm - approx. 21 different punching tools - operating instructions - Original paint finish, not repainted Space requirement L x W x H 1800 x 1150 x 1950 mm Weight 1.7 tons. very good condition

Condition: excellent (used), Year of construction: 2014, operating hours: 31,347 h, functionality: fully functional, power: 800 kW (1,087.70 HP), Equipment: documentation/manual, MWM CHP plant for decentralized electricity and heat generation in electrically controlled, grid-connected operation Controllability 50-100% Technical specifications: Electrical output in kW (electrical): 800 Efficiency: Electrical: 42.3% Thermal: 45.5% Total: 87.3% Emission values: Ihedpfx Asxfgxbeg Uot NOx 500 mg/Nm³

Condition: used, Year of construction: 1993, Technical details: throat: 220 mm number of strokes: 24 Hub/min height of stroke: 100 mm Punching capacity: 800 (80 to) kN round bar steel: max. Ø 30 (scheren) mm square edge steel: 28 (scheren) mm angle steel: 90°/45°: 110 x 10 / 65 x 8 (scheren) mm Ihedju Ickyjpfx Ag Uot flat steel: 180 x 18 / 350 x 16 (scheren) mm knife length: 360 mm hole diameter: Ø 30 x 20 mm (stanzen) mm plate thickness: max. 13 (ausklinken) mm total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimension machine xH: 1,3 x 0,7 x 1,85 m Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Shears: with stop L:280 x W:60 xH:12.5 mm Table size WxD: 280 x 440 mm Working height: 760 mm Punching: Table size W: 280 x D: 280 mm Material support W: 538 mm x D: 328 mm x D: 10 mm Working height: 1120 mm with scraper Notching: Table size W: 450 mm x D: 310 mm x D: 13.5 mm Working height: 1115 mm Hydraulic pressure 260 bar, 50 liters Hand control / foot control *

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Approx. length: 2300 mm Approx. width/depth: 1100 mm Approx. weight: 980 kg Total table length: 2300 mm Infeed table length: 1200 mm Working height: 930 mm Max. cutting depth: 6 mm Fence length: 1200 mm Fence height: 190 mm Tilting range of jointer fence: 90 - 45° Thicknessing extraction port diameter: 120 mm Main motor: 7 kW Required space, length: 2300 mm Required space, width/depth: 1610 mm Required space explanation: Dimensions include maximum travel distances or usable lengths. Machine body length: 1235 mm Ihedpfew I U Nusx Ag Uet Machine body width/depth: 850 mm Length: 1000 mm Width: 3500 mm Working area explanation: Please add the specified dimensions to the required space to obtain the recommended free installation area for the machine. Minimum working height: 3.5 mm Maximum working height: 250 mm Max. cutting depth: 8 mm Connection voltage: 400 V Phases: 3~ Current type: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planer knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed speed: 5/8/12/18 m/min Availability: Short-term Location: Solingen

Condition: used, Year of construction: 2003, round bar steel 32 mm square edge steel 30 mm L-beam 80 x 80 x 8 mm 80 x 13 mm 36 t throat 170 mm work stroke 28 mm work height max. 980 mm material thickness 28 x 13 mm hole diameter in sheet thickness 25x10 / 30x8 mm total power requirement kW weight of the machine ca. 0,8 t dimensions of the machine ca. 1,2 x 0,8 x 1,9 m Ihjdpfx Agjrc In As Uot Profile steel scissors with - 4 workstations - 1 foot trigger - hydr. drive - Support tables - Rectangular notcher - Hole punch including tools

Condition: new, Year of construction: 2021, New machine Year of manufacture: 2021 Dimensions and weights Length: approx. 1725 mm Width/depth: approx. 880 mm Weight: approx. 270 kg Surface planer Maximum cutting depth: 4 mm Extraction connection Thicknessing hood extraction port diameter: 2 x 120 mm Thickness planer Minimum working height: 3 mm Maximum working height: 230 mm Maximum cutting depth: 4 mm Electrical data Drive motor power: 4 kW Connection voltage: 400 V Mains frequency: 50 Hz Cutterhead Type: TERSA Number of planer knives: 3 pcs Speed: 5200 rpm Maximum planing width: 300 mm Isdpfx Agew I Ul Ne Ueht Feed Feed speed: 7 m/min Availability: short-term Storage location: Hochheim

Condition: used, round bar steel 30 mm square edge steel 25 mm L-beam 60 x 8 mm hole diameter in sheet thickness 20 x 15 mm hole punhing press: pressure 40 t hole punching press: throat 175 mm hole punching press: max. length of stroke 32 mm total power requirement 3,0 kW weight of the machine ca. 0,62 t dimensions of the machine ca. 0,9 x 0,8 x 1,3 m Ihodpfjvkiz Tox Ag Ujt

Condition: used, round bar steel 33 mm square edge steel 30 mm L-beam 60 x 8 mm hole diameter in sheet thickness 20 in 13 mm Ihjdpfovkix Eex Ag Ust hole punhing press: pressure 35 t hole punching press: throat 320 mm hole punching press: max. length of stroke 24 mm hole punching press: capacity (dia. x thick.) 28 x 10 mm hole punching press: capacity (dia. x thick.) 23 x 12 mm total power requirement 1,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 1,5 x 0,7 x 1,8 m

Condition: used, round bar steel 30 mm square edge steel 28 mm L-beam 60 x 8 mm flat steel 100 x 12 mm total power requirement 1,5 kW Ihodpsvu Hbfofx Ag Ujt weight of the machine ca. 1,7 t dimensions of the machine ca. 1,5 x 0,7 x 1,8 m Profile steel shears with notcher

Condition: used, round bar steel 42 mm square edge steel 38 mm Iodpfswth N Hsx Ag Usht L-beam 110 x 10 mm cutting capacity 150 x 16 mm pressure 60 t hole punching press: throat 370 mm hole punching press: capacity (dia. x thick.) 25 x 16 / 20 x 19 mm 720 x 420 mm weight of the machine ca. 2,1 t dimensions of the machine ca. 1,8 x 1,6 x 1,85 m Profilstahlschere - inkl. Fußschalter

Condition: used, round bar steel 30 mm square edge steel 28 mm L-beam 90 x 8 mm 150 x 8 mm pressure 35 t Isdjvu Hb Sepfx Ag Uoht total power requirement 2,8 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 0,75 x 1,0 x 1,5 m Profile steel shears combined with: - Foot switch - Length cut

Condition: used, round bar steel 25 mm square edge steel 22 mm Ihsdpfx Ashwaufsg Ujt L-beam 70 x 7 mm cutting capacity 100 x 10 mm plate thickness 10 mm total power requirement 1,3 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,1 x 0,65 x 1,5 m