HURCO VMX60U

HURCO VMX60U

Condition: used, Year of construction: 1988, Technical details: pressure: 10 t workpiece diameter - max.: 40 mm threading length: 70-80 mm workpiece diameter min/max: 3 / 40 mm revolution per minute: 47-94 U/min feed speed: 0,5 - 6 mm/s work stroke: max. 7 mm total power requirement: 4,68 kW Weight approx.: 1,4 t dimensions of machine: 1,4 x 1,4 x 1,7 B T H m dimensions of hydaulic: 0,8 x 1,2 m Nodew D Aq Tepfx Akielh Hydraulic drive manual and automatic cycle adjustable roller speed max. thread diameter 40mm min. thread diameter 3mm up to 3.5 mm pitch max. pitch 1.75mm roller width min. 80 mm max. 120mm shaft speed 47-94 roller shaft diameter 40 various rollers as accessories *

Condition: used, Year of construction: 2002, Technical details: x-travel: 1060 mm y-travel: 610 mm z-travel: 610 mm control: Ultimax 4 spindle speed:: 10 - 10.000 U/min tool taper: SK40 tool changer with: Trommelmagazin mit 24 Plätze places feed speed: XYZ: 3 - 7.000 mm/min rapid traverse:: XY: 30 m/min rapid traverse: Z: 20 m/min table-size: 1220 x 510 mm table load: 1,1 t air-pressure connection: für 6 bar bar Total power requirement: 30 kVA Weight approx.: 6,28 (ohne Anbauteile) t Nodpsu Iddnsfx Akielh dimension machine xH: 2,82 x 3,2 x 2,7 m dimension swarf conveyor LxWxH: 3,0 x 0,65 x 1,5 The machine is currently in the technical department. delimited working area by chip splash guard cabin incl. cooling device with feeding (30bar internal coolant system) (size 1200x500x150mm) capacity for 340Liter spindle with internal coolant system Scraper belt chip conveyor control panel with two screens Attention! Tool gripper arm for tool change is missing on the machine! Is on sale with this limitation! i.D. *

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: Hurco, controller model: WinMax, workpiece weight (max.): 681 kg, total height: 2,519 mm, total length: 1,800 mm, total width: 1,671 mm, table width: 406 mm, table length: 762 mm, table load: 681 kg, overall weight: 2,818 kg, spindle speed (max.): 10,000 rpm, distance table to spindle center: 101 mm, distance table center to spindle nose: 610 mm, spindle motor power: 11 W, spindle nose: ISO40, number of spindles: 1, number of slots in tool magazine: 20, tool length: 25 mm, tool diameter: 89 mm, tool weight: 7 g, Equipment: chip conveyor, documentation/manual, Used Hurco VM10i vertical machining center, ideal for companies seeking precision, reliability, and productivity with a reasonable investment. This machine is perfect for mechanical workshops, subcontractors, and manufacturers of components for automation, automotive, hydraulics, and general mechanical applications. It features a robust structure, high precision, and excellent performance in milling, drilling, and tapping operations. The machine is in good working condition and ready for immediate integration into production. Available for inspection and testing at our facility. The machine is complete with: Njdpfozcpu Iex Akielh * Auger-type chip conveyor with side discharge * High-pressure pump * Digital manuals * CE declaration of conformity

Condition: used, CNC CONTROL Controller: Hurco MAX5 AXES Number of controlled axes: 5 Number of simultaneous axes: 5 X-axis travel mm: 3.200 Y-axis travel mm: 2.100 Z-axis travel mm: 900 B-axis degrees: C-axis degrees: ±360 Distance spindle nose - table surface mm: 66 - 966 Feed rates m/min: 10 / 10 / 10 Rapid traverse m/min: 15 / 15 / 10 WORKTABLE Table dimensions mm: 3.000 x 1.700 Number of T-slots: 7 T-slot width mm: 22 H8 T-slot spacing mm: 220 Max. table load kg: 11.000 SPINDLE Max. spindle speed rpm: 18.000 Spindle power kW (S1/S6): 45 / 63 Spindle torque Nm: 106 Spindle taper / interface: HSK63-A Nedjz Aqhbspfx Akielh COOLING Coolant through spindle bar: 40 TOOL SYSTEM Tool holder / taper: HSK63-A Tool magazine capacity: 60 Max. tool diam. (free adj. places) mm: 76 Max. tool length mm: 300 Max. tool weight kg: 7

Condition: used, Year of construction: 2013, Milling machines Travel distance X: 533 mm Travel distance Y :406 mm Travel distance Z: 483 mm HSC-machines Number of axis: 5 milling machine / machining center Control: Hurco WinMax 9 spindle chuck: BT30 spindle revolutions: 30000 rpm Speed range to: 30000 U/min tool changer: 20 - time spindle cooling chip conveyor Manufacturer: HURCO Nledpszx T I Nsfx Akioh Model: VM 10 UHSi Year of manufacture: 2013 Control: HURCO WinMax 9 Number of axes: 5 X-axis travel: 533 mm Y-axis travel: 406 mm Z-axis travel: 483 mm Spindle speed: up to 30,000 rpm Spindle taper: BT30 Tool changer: 20 positions Equipment: 5-axis machining HSC (High-Speed Cutting) Tool changer Spindle cooling Chip conveyor Tool/workpiece probe Renishaw touch probe The machine is particularly suitable for precise and demanding milling operations as well as applications requiring high spindle speeds.

Condition: used, Year of construction: 2002, functionality: fully functional, The machining center has been inspected by a Hurco technician and found to be fully operational without any faults. Technical Data - Travel ranges: X 1,270 mm, Y 600 mm, Z 610 mm - Drive power: 30 kW - Spindle speed: 15,000 rpm - Spindle taper: SK 40 Type B - Feed rate: up to 23 m/min Work Table: - Dimensions: 1,500 mm x 660 mm - Max. workpiece weight: 1,300 kg Control: - Hurco Ultimax 4, incl. software for milling simulation - electronic hand control unit - Interfaces: RS 232C / V24 - 2 monitors for text and graphics processing - 2 software units for plain text and ISO programming Machine Construction: Nsdpfx Akox Iikboislh - High rigidity, suitable for roughing operations Tool Changer: - Double-arm changer with 24 stations Equipment: - Cooling unit for milling spindle - Rinsing system for chip removal - Splash guard cabin - Coolant system with filtration - Internal coolant supply ICS 20 bar - Chip conveyor Machine Data: - Required space (without service areas!) LxWxH approx. 4,750 mm x 3,120 mm x 2,950 mm - Weight approx. 9,000 kg - Connected load 50 kVA, 400V, 50/60 Hz An inspection of the machine is possible by appointment. All tools and operating materials visible in the photos are not included in the scope of delivery. Technical changes and errors excepted.

Condition: used, Year of construction: 2002, x-travel 1.060 mm y-travel 610 mm z-travel 610 mm control Winmax 9 (Upgrade) table-size 1.270 x 610 mm max. table load 1.100 kg number of T-slots 5 T-slot - width 18 mm T-slot - distance 100 mm Njdjx R Enhopfx Akislh turning speed range - milling ~ 10.000 U/min power capacity - milling spindle 18 / 11 kW tool taper SK 40 Tool changer 24 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 120 mm max. tool length 300 mm max. tool weight 7 kg feed ~ 15,4 m/min rapid traverse X-axis 30 m/min rapid traverse Y-axis 30 m/min rapid traverse Z-axis 20 m/min weight of the machine ca. 7,0 t dimensions of the machine ca. 3,5 x 3,2 x 3 m Machining Center - Vertical HURCO VMX 42

Condition: good (used), Year of construction: 2004, functionality: limited functionality, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller manufacturer: Okuma, controller model: OSP-E100M, workpiece length (max.): 600 mm, workpiece width (max.): 710 mm, workpiece weight (max.): 400 kg, total height: 2,760 mm, total length: 4,535 mm, total width: 2,415 mm, table width: 400 mm, table length: 400 mm, table load: 400 kg, overall weight: 10,000 kg, spindle speed (max.): 8,000 rpm, distance table center to spindle nose: 710 mm, spindle motor power: 15,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, rotational speed infinitely variable, Okuma Space Center MA400HA Horizontal Machining Centre Machine Type: CNC Horizontal Machining Centre Year: 2004 Control: OSP-E100M Axes: 4 No. of Pallets: 2 Condition: Good - There is an issue with the pallet changer. Includes Cromar Swarf Conveyor Coolant Filtration System Technical Specifications Pallets: 2 Size of Pallets: 400 x 400mm X Axis Travel: 560mm Y Axis Travel: 610mm Z Axis Travel: 625mm B Axis Travel: 360 Deg Rapid Traverse: 60m/min Spindle Centre to Pallet Top: 50 - 660mm Spindle Nose to Pallet Centre: 85 - 710mm Max Pallet Load: 400kg Max Workpiece Dimensions: 600 x 710mm Tool Pockets: 40 Spindle Taper: BT40 Spindle Power: 15kW Spindle Speed: 8,000rpm Machine Dimensions: 4535 x 2415 x 2760mm Nsdpfx Akjwcd Evsijlh Machine Weight: 10,000kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 2008, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 510 mm, total height: 3,250 mm, total length: 3,545 mm, total width: 3,970 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 48, Equipment: chip conveyor, For sale is a high-precision Hurco VTXU vertical 5-axis machining center with a swivel rotary table. The machine is in very good cosmetic condition. Njdpfjzvd U Uex Akijlh Technical data: Year of manufacture: July 2008 Control: WinMax (dual-screen) Travel distances X / Y / Z: 800 x 700 x 510 mm Swivel range A-axis (tilting axis): -30° to +110° Rotation range C-axis (rotary table): 360° (full range) Rotary table diameter: 610 mm Table load: max. 400 kg Distance spindle nose - table: 150 - 660 mm Max. spindle speed: 12,000 rpm Spindle power: 18 kW Torque: 237 Nm Tool holder: SK 40 Magazine capacity: 48 tools Max. tool length: 280 mm Max. tool weight: 7 kg Tool change time chip-to-chip: 8 sec. Voltage: 400 V / 50 Hz Connected load: 55 kVA Compressed air requirement: 6 - 8 bar Machine dimensions (W x D x H): 3,545 x 3,970 x 3,250 mm Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: like new (used), Year of construction: 1996, Retrofitted: 2026 Nedpjyf Rr Tjfx Akiolh Numerical control: NUEVO/NEW HEIDENHAIN TNC-320 Technical features Dimensions Table dimensions: 6000 x 2000 mmNumber of T slots: 13T slots dimensions: 22 mm Traverses of axis X axis traverse: 6000 mmY axis traverse: 3800 mmZ axis traverse: 1000 mmVertical capacity (VC): 500 / 1500 mm (direct exit)Distance between columns: 3100 mm Milling head Universal head UM40 (Body B: manual / Body C: 3º auto-indexing) Direct spindleTool clamping system: HydraulicTaper nose: ISO50 (DIN-69871)  /  Pull stud: DIN-69872Speed range: 3000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 7000 / 12000 mm/min Weight and dimensions Maximum weight on table: 15000 kgMachine weight approximate: 50000 KgMachine dimensions approximate: 14740 x 5330 x 5050 mm Accessories Guarding: 2 sliding doors with a new perimetral wire-mesh safety fenceHead changer: automatic with lateral hinge/support in columnChip conveyor: 2 longitudinal palletsElectronic handwheel: New HR-510Coolant: External Internal high pressure through spindle (internal only with direct exit head) Sale conditions Warranty: 6 months mechanical spare partsPrice and sale conditions: On request View all technical features