Used Combine Harvester for sale (3,353)

Condition: used, with Tersa knife shaft used, good condition Make Müller Brugg Type DA 6 M Planing width approx. 610 mm Planing height approx. 220 mm Table length approx. 2200 mm Bridge protection Slotted table lips Low-noise table lips Number of knives 4 pieces Ihjdevwgh Rjpfx Ag Uot Knife system - Tersa reversible knives Table sliding rollers Space required approx. 2300 mm x 1500 mm x 1100 mm Weight approx. 2000 kg Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee or warranty

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 89-57-59, total width: 600 mm, total height: 800 mm, total length: 1,400 mm, planing width: 310 mm, height adjustment type: mechanical, overall weight: 243 kg, number of planer blades: 3, Types: FS 31, Machine no.: 89-57-59, Year of manufacture: 1989, Power: 3/380V/50Hz, Motor: 2.2 kW, 4.9 Amps. Countershaft, Max thickness: 200 mm, Machine dimensions: 1400 x 600 mm, Weight: 243 kg. Isdpfow Apu Aox Ag Usht

Condition: used, machine/vehicle number: 2520, round bar steel:42 mm square edge steel:38 mm Ihodjcxxrpepfx Ag Ujt L-beam:90° 110x10 mm flat steel:150 x 16 mm blade length:250 mm notching deepth up to:12 mm notching: l + T material:80 x 10 mm hole punhing press: pressure:50 t stroke:27 mm hole punching press: capacity (dia. x thick.):25 x 16 / 20 x 19 mm weight of the machine ca.:1,6 t dimensions of the machine ca.:1,6 x 0,85 x 1,8 m

Condition: like new (used), Year of construction: 2024, functionality: fully functional, planing width: 410 mm, planer shaft diameter: 100 mm, power: 5.5 kW (7.48 HP), Equipment: low noise, Jointer-thickness planer ADH 5-410 *available at short notice* Demonstration machine from showroom (factory set and planed). -Spiral knife planer shaft with 66 knives (3 rows of 22 knives each) 15 x 15 x 2.5 mm --Plane width 410 mm -Working table format planer1800 x 410 mm Working table format -Thickness planer 700 x 406 mm -Planer shaft diameter100 mm -Planer blade speed 4500 rpm -Cutting depth planer max. 5 mm -Anodized planing fence Format L x W 1100 x 155 mm -Adjustable blade shaft guard Standard -Suction nozzle diameter 120 mm -Thickness planer width 406 mm -Thickness passage min - max 4 - 225 mm -Chip removal thickness planer max. 4 mm -Feed speed 8 m/min -Motor power 400 V / 50 Hz4.0 kW -Digital display thicknessing table adjustment standard -Space requirement L x W approx.2000 x 1000 mm -Weight approx. 450 kg Ihodpfx Aohm Stpog Ust -Can be driven under with pallet truck Standard -Light gray/graphite gray 7035/7024 paint finish

Condition: new, Year of construction: 2024, functionality: unexamined, power: 265 kW (360.30 HP), Compact, highly efficient combined heat and power unit with a state-of-the-art SCANIA 6-cylinder, lean-burn gas turbo, 4-stroke gas Otto engine. Unit, gas pressure control system, mixture and engine water cooling circuit mounted on base frame for power and heat generation with a high-quality synchronous generator (3P, 400V, 50Hz) for mains parallel operation and optimized heat extraction via plate heat exchanger for heating water/process heat with a temperature level of VL 90°C / RL 75°C, with catalytic converter (optional SCR system) for low-emission operation in accordance with the MCP Directive (EU) and 44th BImSchV (DE). Ihodpfx Aet E N I Seg Ust TECHNICAL DATA GENSET /BHKW - NATURAL GAS/BIOMETHANE Electrical output at cos φ=1: 265 kWel Electrical efficiency: 41.9 % Thermal efficiency: 44.1 % Total efficiency: 86.0 % Thermal output motor: 150 kWth Thermal output at 120°C exhaust gas temperature: 129 kWth Total thermal output: 279 kWth Electricity coefficient el/th. : 0,95 LEAN TURBO NATURAL GAS / BIOMETHANE ENGINE Engine type 6R Displacement: 12,7Ltr Combustion heat output - 100% load: 632kWel Gas consumption: 63,2Nm³/h Length x width x height m 4.1 x 1.5 x 2.1 The CHP has a control cabinet with a display for the visualization of all relevant operating parameters including a DSL modem for remote maintenance and external monitoring, as well as an interface for control energy for connection to the Energiepilot E2M. The scope of delivery includes a mains starter to provide the optimum starting speed, as well as a gas detector, smoke detector, emergency stop switch and alarm flashing light/horn. All pipes are made of V2A and insulated where necessary. The CHP unit complies with the medium-voltage directive VDE-AR-N 4110:2018-11. An automatic gas shut-off valve for installation outside the CHP installation room and all operating fluids are not included in the scope of delivery. The CHP unit is also optionally available in a container.

Condition: good (used), Stock number: 2965-1 Manufacturer: Gebr. Bayer Ihjdpfjv D Iqmex Ag Ujt Year of manufacture: Machine number: 6024 Type / model: GB42N Grinding wheels left and right: 200 x 35 mm Support left: 70 x 45 mm Right: drill grinding device Base area: 400 x 340 mm Bath: 800 x 650 mm Dimensions of grinding stand: 800 x 650 x 1,100 mm Motor: 0.75 kW Accessories/equipment: Condition: good Weight: 130 kg

Condition: excellent (used), Saw-milling-jointing-thicknesser-Technical data: Jointing planer: -Max. working width 400 mm -Swivelling joint stop 90C-45C tersa planing knife Thicknesser: -Max. working width 400 mm Passage height 230 mm Circular saw: -Max. Cutting length 3000 mm -Max. Scoring unit Stable boom with angle-adjustable telescopic ruler extendable up to 285 mm with 2 folding stops-Sliding table with prism guide, milling machine: Isdevk Sqdjpfx Ag Ujht -Spindle diameter 30 mm -Milling stop with stop ruler You can call or write to us. We can speak and write German and Russian. You can also send messages in English.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: AB00033534, planing width: 520 mm, planer shaft diameter: 120 mm, total length of planing tables: 2,310 mm, surfacing fence height: 1,200 mm, number of planer blades: 4, input voltage: 400 V, input frequency: 50 Hz, rotational speed (max.): 5,000 rpm, Equipment: motor brake, Main Features: - Quick-change system for opening the tables - Speed, ergonomics, and safety - Worktable adjustment via parallelogram system - Lasting precision Technical Data: - Usable working width: 520 mm - Total table length: 2310 mm - Cutter block diameter: 120 mm - Planer spindle speed: 5000 rpm - 4 knives: 35 mm x 3 mm x 520 mm - Aluminium fence: 1200 mm x 190 mm - Fence tilting range: from 90° to -45° - Min./max. planing height: 3 / 250 mm - Feed speed thicknessing: 5-8-12-18 m/min - Extraction hood diameter, surfacer: 120 mm - Extraction hood diameter, thicknesser: 120 mm Standard Equipment and Accessories: - Infeed table adjustment via parallelogram system for chip removal by degree scale - Simultaneous height adjustment and locking of the worktables, complete with anti-tilt device - Quick-change system for converting from surfacing to thicknessing (CE version), with special support for opening the surfacing tables and automatic pneumatic positioning system for the extraction hood with hydraulic system - "READY" electronic control. Includes: * Thicknessing table adjustment * Manual, semi-automatic, and automatic mode with 99 storable work programs * Additional functions: calculator and hour counter - Machine table height adjustment via 4 steel threaded spindles - Independently motorized feed for thicknessing - Rubber-coated outfeed feed roller - Linked pressure shoes in the infeed - Planer spindle and knife holder with markings as positioning aid, including setting gauge for planer knives - Automatic star-delta start for main motor - Motor power: 9 kW 50 Hz (11 kW 60 Hz) (S6 -40%) [S1] 7.5 kW 10 hp 50 Hz (9 kW 12 hp 60 Hz) [S6 -40%] 9 kW 12 hp 50 Hz (11 kW 15 hp 60 Hz) - Operating tools Safety/Protection: - Micro safety switches for proper positioning of the surfacing tables and extraction hoods - Surfacing guard (CE version) - Automatic motor brake on main motor - Thermal protection switch - 110V auxiliary circuit - Emergency stop switch - Lockable main switch - CE Declaration of Conformity (CE version) Consisting of: Ihodpfx Ajwwv Ufjg Uet R0.20.20 Linvincibile FS 7 CE version 93.07.31 Voltage 400 EU 93.12.01 Frequency 50 Hz 34.02.15 "TERSA" cutter block with disposable reversible knives, complete with one set of knives 24.06.15 Tilting auxiliary fence for thin workpieces 08.32.28 Base

Condition: ready for operation (used), System includes (1) Two-Cylinder Motor HERFORD 2H 280, power: 150PS, rotational speed: 400/min, electric/ heating power: 83/ 140kWh, with Generator MARELLI MJB 250 LE4 (2) Three-Cylinder Motor HERFORD 3H 280, power: 225PS, rotational speed: 400/min, electric/ heating power: 125/ 212kWh, with Generator MARELLI MJB 250 MA4. Ihsdegg Stfspfx Ag Uet

Condition: like new (used), For sale is a Hammer edge sanding machine HS950, with a belt length of 2515 mm. The machine is in good condition and has been inspected by our specialist staff. Iedpfx Agow Hf D Ij Usht - Belt length: 2515 mm - With oscillation motor - Tiltable 0 - 90° - Motor power: 2.2 kW / 3 HP - Year of manufacture: 2024 - Demonstration machine The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel. 06244-20299 Related terms: edge sanding machine, sanding machine, surface finishing Reference: R-A0117

Condition: new, Year of construction: 2024, functionality: fully functional, power: 350 kW (475.87 HP), Compact, highly efficient combined heat and power unit with a state-of-the-art SCANIA V 8-cylinder, lean-burn gas turbo, 4-stroke gas Otto engine. Unit, gas pressure control system, mixture and engine water cooling circuit mounted on base frame for power and heat generation with a high-quality synchronous generator (3P, 400V, 50Hz) for mains/parallel operation and optimized heat extraction via plate heat exchanger for heating water/process heat with a temperature level of VL 85°C / RL 70°C, OPTIONAL: with catalytic converter (optional SCR system) for low-emission operation in accordance with the MCP Directive (EU) and 44th BImSchV (DE). TECHNICAL DATA GENSET /CHP - Biogas 50% CH4 Electrical output at cos φ=1: 350 kWel Electrical efficiency: 41.4 % Thermal output motor at 180^exhaust gas temperature: 334 kWth Electricity coefficient el/th. : 1,05 Engine type V8 Displacement: 16 Ltr Combustion thermal output - 100% load: 845kWel Gas consumption at50%CH4: 169.1Nm³/h Length x width x height m 4.1 x 1.5 x 2.1 Weight unfilled 4500kg The CHP has a control cabinet with a display for the visualization of all relevant operating parameters including a DSL modem for remote maintenance and external monitoring, as well as an interface for control energy for connection to the Energiepilot E2M. The scope of delivery includes a mains starter to provide the optimum starting speed, as well as a gas detector, smoke detector, emergency stop switch and alarm flashing light/horn. All pipes are made of V2A and insulated where necessary. To ensure that the motors are kept warm, the installed heat pumps are programmed to start up in a set cycle, that they start up in a set cycle and thus enable the desired temperature to be maintained. Ihjdpfx Ajt Uu Ezeg Ujt An automatic gas shut-off valve for installation outside the CHP installation room is not included in the scope of delivery. The CHP unit complies with the medium-voltage directive VDE-AR-N 4110:2018-11. An automatic gas shut-off valve for installation outside the CHP installation room and all operating fluids are not included in the scope of delivery. The CHP unit is also optionally available in a container. The entire unit is also available as a natural gas version.

Condition: good (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 26KL29053, cutting height (max.): 85 mm, saw blade diameter: 250 mm, planing width: 310 mm, feed rate X-axis: 6 m/min, total length of planing tables: 1,250 mm, total width: 1,100 mm, total length: 2,100 mm, total height: 860 mm, type of input current: three-phase, jointer table length: 1,250 mm, extraction nozzle diameter: 30 mm, trimming length: 2,000 mm, height adjustment type: mechanical, overall weight: 465 kg, table length: 2,000 mm, chip removal: 2 mm, chip removal for surfacing (max.): 2 mm, table width: 310 mm, number of planer blades: 51, surfacing fence length: 100 mm, cutting length (max.): 2,000 mm, input voltage: 380 V, working height: 860 mm, working width: 100 mm, table height: 860 mm, power: 3 kW (4.08 HP), The machine was only used in a hobby workshop by a single person. It is fully functional. Additional equipment: Silent Power spiral cutter block (planer). Thickness planer height adjustment via handwheel with integrated display. 2 m sliding saw table. I speak German/Hungarian. Iodjxw R Anjpfx Ag Ujht

Condition: good (used), Year of construction: 1995, 551 kW Year of construction 1995 incl. concrete garage with silencer and additional oil cooler Engine condition: good (approx. 64,000h) Complete engine overhaul in 2017 at 48,500h Turbocharger overhauled at 60,000h Concrete garage/container: 9x3x4m (LxWxH) Offer is without guarantee of availability Ihjdpjvcm Nfjfx Ag Uot

Condition: like new (used), Year of construction: 2024, Machine Technical Data: Carriage length: 2500 mm X-Roll carriage guide system Ijdpfx Aewi Uftsg Ueht Saw adjustable from 0–45° Saw lifting and lowering Digital measurement display on right side Cutting width right: 850 mm Spindle diameter: 30 mm Spindle tilt: 0–45° adjustable Spindle height adjustable Left-right rotation Spindle speeds: 3,500 / 6,500 / 8,000 / 10,000 rpm Max. diameter of milling tools: 230 mm Spindle working height: 115 mm Spindle covers Main saw motor: 5.5 kW Milling motor: 5.5 kW European CE Certificate

Condition: used, Combined disc + vertical belt sander Disc diameter: 600 mm Ihedpfx Agjlagdwo Ujt Encumbrance: 110 x 80 cm, height 160

Condition: excellent (used), For sale is a used Felder AD5-31 jointer-thicknesser with a planing length of 1500 mm. The machine is used as a demonstration unit in our showroom and is therefore in like-new condition. Technical data: - 4-knife cutterblock - Planing width 310 mm - Planing length 1500 mm Isdpfxsw Hcygj Ag Uoht - Max. workpiece height 230 mm - Suction port Ø 120 mm - Motor power 4 kW / 5.4 HP - Year of manufacture 2022 The machine is located at A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Contact: Tel. 06244-20299. Related terms: jointer, thicknesser, planer, jointer-planer, thickness planer Reference: R-A0117

Condition: like new (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 01254653, Production line for wooden parts of TERTU wood-steel rails. - T18 grooving machine - grooving machine T 22 - grooving machine - post - Curving saw - finishing machine (curving, drilling) - sliding tables - drilling table - 4x spare head - complete spare knives and drill bits Ihsdpou A Hv Nsfx Ag Uet Simple very high quality and solid machines. Fully complete, ready for operation.

Condition: excellent (used), 5.5 kW motor Ihodpfx Agowm Dz Se Uet Table length 2 m Table width 52 cm 4 blades Working height 19 cm Electrically adjustable top and bottom

Condition: as good as new (ex-display), CMT–VSR Pro is an advanced high-speed core balancing machine including a manually operated, fixed-mount correction cutter that ensures a fine quality surface finish and a servo-controlled air valve to provide the highest measuring accuracy. Ihodpfx Asiihqwog Ujt The machine has been designed for the high-speed balancing of turbocharger core assembly of passenger car, light- and heavy-duty trucks. It is used for checking whether there is any unwanted dynamic phenomenon of a rotor at high rotational speed value e.g. the flexural of shaft by the moment of force. Balancing in a full range of rotational speed extends lifespan of turbocharger and eliminates the undesirable effect of whistling. Core is installed on the hub of the machine by the use of a mounting flange with the two clamps to lock it. Turbine wheel is driven by compressed air supplied through a drive sleeve with a nozzle system. During a measurement an oil with an appropriate temperature and pressure is supplied, as a result of which the balancing conditions are similar to those of a combustion engine. As a result, the vibration graph of a core in relation to a rotational speed value and a vibration norm is displayed. In addition, to simplify the analysis of the vibration graph, the software indicates the exact angular position of a mass correction

Condition: new, Year of construction: 2025, Our C300 5-job combines feature a sturdy folded and electro-welded steel plate frame. Significantly thick cast iron platens are carefully ground and milled, and all material used is certified to ensure the highest quality. They mount three self-braking motors, each individually protected, with the ability to adjust power from 3 hp to 4 hp according to the required specifications. Iedpfx Ajuzxh Isg Ueht The carriage, made of milled and anodized aluminum with significant thickness, can vary in length depending on the model or specific requirements. It runs on steel balls on a track also made of steel and is adjustable for optimum smoothness. Standard equipment includes a 1600 mm carriage, while optional 2200 mm carriages are available. The C300 is an ideal choice for the hobbyist and is indispensable for the restorer. Built to above-average standards in its class, it maintains a price-performance ratio that makes it truly competitive in the marketplace. The machine is fully compliant with the latest CE regulations, ensuring high safety standards. TECHNICAL DATA: Work surface mm 300×1500 Knife-holder shaft diameter mm 70 Shaft rotation speed g/m 5700 Number of knives no. 3 Knives dimensions mm 300x25x3 Max platen registration mm 4 THICKNESS PLANER Work surface mm 300×660 Max pass thickness mm 5.5 Feed speed m/min 7 Max wood passage mm 220 Wood passage min mm 4 Shaft rotation rpm 5700 CIRCULAR SAW Worktable mm 220×1000 Rotational speed g/mm 4500 Blade Ǿ 250 Blade hole Ǿ 30 Max cutting height 90° mm 80 Max cutting height 45° mm 50 Tilting blade 0° 45° Max pass between blade and guide mm 560/700 Engraver Ǿ 90 Scoring hole Ǿ 22 Rotational speed rpm 7000 CAVING MACHINE Work table mm 500×250 Longitudinal stroke mm 205 Transverse stroke mm 95 Vertical stroke mm 90 Spindle Ǿ 16 Spindle rotation rpm 5700 VERTICAL MILLING MACHINE Worktable mm 220×1000 Rotation speed rpm 2000/3100/4400/ 7000 Standard spindle diameter mm 30/35/50 Shaft length mm 105 Vertical shaft stroke mm 115 Max tool diameter mm 160 Max tenon depth mm 55 STANDARD EQUIPMENT Counter frame, flag support mm 800×600 Three-phase motor power KW/HP 2.2/3.0 Weight kg 560 ACCESSORIES ON REQUEST Single-phase motor KW/HP 4.0/3.0 Sliding carriage mm 2200×315 LIST PRICE EXCLUDING VAT

Condition: like new (used), For sale is a used Felder AD7-41 surface-planer thicknesser with a planing thickness up to 230 mm. The machine is in use as a demonstration unit in our showroom and is therefore in like-new condition. Technical specifications: - 4-knife cutterblock - Planing width: 410 mm - Table length: 2000 mm - Max. workpiece height: 230 mm - Electric thickness adjustment PowerDrive - Extraction port Ø 120 mm - Motor power: 4 kW / 5.4 HP - Year of manufacture: 2023 The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! Ihjdpfxew Hckrj Ag Ujt For information call 06244-20299. Related terms: surface planer, thickness planer, planing machine, jointer, thicknesser Reference: R-A0117

Condition: excellent (used), For sale is a used Hammer A3-41 Silent Power surface planer and thicknesser with a jointer length of 1800 mm. The machine has been checked by our specialized staff and is in very good condition. Technical data: - Silentpower spiral cutterhead - Planing width 410 mm - Jointer length 1800 mm - Max. clearance 230 mm - Motor power 4 kW / 5.4 HP - Suction connection Ø 120 mm - Year of manufacture 2022 Isdowqq Dhopfx Ag Ujht The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: jointer, thickness planer, planer, jointing, thickness Reference: R-A0117

Condition: like new (used), Year of construction: 2023, For sale is a used Hammer A3-41 planer-thicknesser with a planing length of 1800 mm. The machine has been checked by our specialist staff and is in mint condition. Technical data: - 3 system knife planer shaft - Planing width 410 mm - Planing length 1800 mm - Max. passage 230 mm Ihedpfx Aev Dah Dog Ujt - Motor power 4 kW / 5.4 HP - Extractable Ø 120 mm - Year of manufacture 2023 - Mint condition The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: planer, thicknesser, planing machine, planing, thicknessing Reference: R-A0117-1

Condition: excellent (used), Year of construction: 2019, For sale is a used Hammer B3Winner Comfort circular saw and router with a cutting length of 2000 mm. The machine is in very good condition and has been serviced and inspected by our specialist staff. (Fully functional) Technical specifications: - Circular saw and router tiltable 90-45° - Sliding table 2000 mm - Outrigger table with degree grid index - Miter stop 1300 mm - 4 routing speeds: 3000/6000/8000/10000 rpm - Cutting width 800 mm Ihjdpfsv Sbpxox Ag Uet - 2 motors, each with 5.5 HP (4 kW) 400 volts - Year of manufacture 2019 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: circular saw, milling machine, milling machine, combined machine, combination machine Reference: R-L0AHG

Condition: excellent (used), Year of construction: 2022, For sale is a used Hammer A3-31 planer-thicknesser with a planing width of 310 mm. The machine is in very good condition and has been reconditioned and checked by our specialist staff. (Fully functional) Ihedpfjv Ianxex Ag Uot Technical data: - Planer-thickness width 310 mm - 3 knife shafts (reversible knives) - Thickness height 4-225 mm - Dual foldable planer tables - Pivoting planer stop - 2.9 kW / 4 HP motor / 400 volts - Year of manufacture 2022 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: planer, thicknesser, planing machine, planing, thicknessing Reference: R-AT0YY