Used Cnc Baz for sale (9,011)

Condition: excellent (used), Year of construction: 2024, OPERATING RANGE V807M Min. / max. height 10 – 460 mm Min. / max. width 50 – 1.140 mm Max. positioning weight 15.000 kg Max. operating width bottom side 1140 mm 1 Bevel angle + / - 50° Minimum automatic infeed length 1900mm Minimum automatic outfeed length Approx. 1400mm 2 1 Applicable to bottom side marking and square tube cutting. 2 1400mm automatic outfeed with at least one 1900mm part in the nesting. OPERATING SPEEDS Max. speed X-axis (measuring system) 60 m/min Max. air speed robot 11.6 m/sec Max. speed additional rotational axis 90 ͦ /sec ROBOT ACCURACY Repeatability ±0.04mm Absolute accuracy ±0.25mm MEASURING ROLL SYSTEM Max. speed 60 m/min Diameter measuring rolls 170 mm PLASMA CUTTING UNIT XPR300 CORE Min. thickness 3 mm Max. thickness 80 mm Max. pierce capacity 45 mm Dross-free cutting max. 38 mm Marking Yes, with same consumables Plasma gas mild steel Cutting O2 (99,5% pure clean, dry, oil-free) Marking Nitrogen gas Shield gas mild steel O2 and Air (ISO 8573-1:2010 Class 1.4.2) Automatic gas console Yes Ljdpfszy Sqfsx Ac Aert Cutting speed mild steel 6 mm Approx. 4.036 mm / min 130A 12 mm Approx. 3.061 mm / min 170A 25 mm Approx. 1.950 mm / min 300A 30 mm Approx. 1.530 mm / min 300A 40 mm Approx. 940 mm / min 300A 50 mm Approx. 560 mm / min 300A 80 mm Approx. 165 mm / min 300A * Grounding max. 6 m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes.

Condition: excellent (used), Year of construction: 2006, A full set of 5 Cogsdill Boring, facing, and contouring heads. Comprising - ZX300 Facing & Contouring Head Bi-directional Stub Tool Seat Pocket Tool Single Slide Tool Valve Seat Pocket Tool Extension and support bars included, with bespoke stand as shown. Operations include: Boring, Facing, Contouring, Threading Taper Boring, Deep Cavity Boring Grooving. Profiling, Back-spotfacing Lrodpfxez Erx Ds Ac Ast Chamfering, Bottle Boring. Radii

Condition: used, XYZ Proturn 410 CNC/Manual Lathe with Proto Trak LX3 Control, Chuck Size 250mm Diameter, Swing Over Bed 460mm, Distance between Centres 1200mm, Gap Bed, Spindle Speeds 15 - 2500rpm. S/No. 304 Lrodpozy N Syefx Ac Ast Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser

Condition: good (used), Year of construction: 1997, Used Lathe DANOBAT TCN-12 CNC, 1500 mm, Fanuc 0-T, Year of Manufacture 1997 Swing over bed 670 mm Lredpozz Rv Njfx Ac Aot Swing over carriage 525 mm Distance between centers 1500 mm 12-position tool post CNC control: Fanuc 0-T Chip conveyor

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm Lsdpfx Aoy Ni Ivec Ajrt ISO40 Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Y – 596mm Z – 584mm Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Lredpfx Acjwym Nfo Ast Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: excellent (used), Year of construction: 2022, Turning diameter 376mm, turning length 760mm, bar capacity 76mm, Lredpfx Aezt Spnoc Aet Y axis -/+ 52.5mm, C axis 0.001 degrees on both spindles, 24 station turret, 22KW Motor, Main spindle 4000rpm, sub-spindle 4500rpm, Fanuc I series, 3 jaw chucks, swarf conveyor, tool setter, LNS barfeed unit.

Condition: good (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 210 mm, turning length: 1,000 mm, turning diameter: 330 mm, spindle bore: 40 mm, spindle speed (max.): 3,500 rpm, spindle motor power: 7 W, Equipment: documentation/manual, bj. 2000 Draailengte 1000 mm draaidiam. boven het bed 330 mm boven dwarsslede 210 mm Lengte tussen de centers 1000 mm Type besturing FANUC Spindel conisch Camlock D1-4 Spindel boring 40 mm Draaisnelheid max. 3500 rpm Vermogen van de spindelmotor 7.5 kW Lengte x breedte x hoogte 2100,0 × 1200,0 × 1600,0 Gewicht 1200 kg Ljdpjxd Aigefx Ac Aert

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: ADS550×5000, For sale: Fenstek ADS550×5000 CNC-controlled double-head cutting saw from 2019 for the precise cutting of aluminum profiles. Ljdox R U Epjpfx Ac Aert The machine is suitable for series production of profiles for windows, doors and facade systems. The two saw heads can operate independently or synchronously. The moving saw head is automatically positioned via a servo system. Key benefits: - Fully CNC-controlled - Two saw heads operating independently or synchronously - Automatic servo positioning of the moving saw head - Automatic height measurement system for precise cuts below 45° - Touchscreen operation - Integrated label printer for product identification and traceability - Infinitely adjustable saw feed - Heavy and stable machine bed Technical specifications: - Power supply: 380–420 V / 50 Hz - Total power: 5.5 kW - Saw motors: 2 × 2.2 kW - Saw blade diameter: 550 mm - Maximum cutting length: 5,000 mm - Minimum cutting length at 90°: 360 mm - Cutting angles: 45° and 90° - Repeat accuracy: ±0.1 mm - Air consumption: 60 l/min at 0.5–0.8 MPa A complete double-head cutting saw for companies that want to process aluminum profiles quickly, reproducibly and accurately.

Condition: used, Year of construction: 1989, functionality: not functional, turning length: 600 mm, turning diameter: 350 mm, spindle bore: 105 mm, spindle motor power: 22 W, total length: 3,063 mm, total width: 1,660 mm, overall weight: 4,300 kg, Equipment: documentation/manual, The machine is not functioning due to a fault in the regulator. All the machine's mechanical properties are perfect. Ledpszwdamsfx Ac Ajrt The machine is very rigid and can achieve tolerances as tight as 0.01 mm. It can also be used as spare parts.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 560 t, stroke length: 500 mm, operating speed: 10 mm/s, reverse speed: 30 mm/s, table width: 1,400 mm, clearance between the columns: 1,260 mm, total length: 2,010 mm, total width: 1,600 mm, total height: 2,200 mm, overall weight: 4,800 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, safety light barrier, We are offering this very good Boschert Quick-Bend 56 CNC press brake, manufactured in 2018. Manufacturer: Boschert Model: Quick-Bend 56 CNC Year of manufacture: 2018 Condition: very good Lrjdpfjy Nbw Asx Ac Ajt Category ID: 1466 Type ID: 1717 Machine type: press brake If you have any further questions or need more information, please send us a message or give us a call.

Year of construction: 2003, condition: good (used), functionality: fully functional, Highly Automated CNC Pipe Bending Cell: Rosenberger RB20 Typical Applications The RB20 series is designed for the cold bending of pipes with one or more bends. It is used in industries such as the automotive industry, furniture manufacturing, and plant engineering, where precise, repetitive bends are required. Lsdpfxozz Hn Io Ac Aert Technical Features and Function Type: ROSENBERGER RB20 (manufactured in 2003) Performance & Geometry: Servo-electric precision drive with a cold bending capacity of up to Ø 20 x 1.5 mm in steel. High flexibility thanks to freely selectable bending planes within the 78 mm die height and generous 3-axis travel ranges (X/Y/Z: 260 × 146 × 1,170 mm) Control Technology: The logic is managed by a robust Siemens Simatic S7-300 PLC, paired with an industrial operator panel from B&R Robotic Automation: Fully automatic handling (loading/unloading) via an integrated Motoman industrial robot, complete with XRC controller and the corresponding teach-in terminal for path programming. Product removal is carried out reliably via a discharge conveyor belt. Marking system (upgraded in 2021): A modern, high-performance VideoJet 1860 inkjet coder (manufactured in 2021) with microprocessor control enables direct product marking (e.g., lot numbers or barcodes) immediately after the bending process System Safety & Peripherals: CE-compliant safety measures via a SICK safety light curtain and a perimeter safety fence. Optical status indication via R

Condition: used, Year of construction: 2013, functionality: fully functional, Equipment: documentation/manual, Mazak Machining Center 5-Axis (4 + 1 Positional) Lrodozxpv Nopfx Ac Ajt Variaxis J-500 Model Year 2013 Mazatrol Matrix Nexus 2 CNC

Condition: excellent (used), Year of construction: 2015, Haas ST-20SS Year of manufacture: 2015 Revolutions per minute: 5000 Tool setter Coolant system Tailstock Includes tooling Lodpfsz At Anjx Ac Aort Video available.

Condition: used, Year of construction: 1987, Universal CNC Milling Machine CNC MAHO MH 400 E Lodpfszy Rrzex Ac Asrt Travel X: 400 mm Travel Y: 375 mm Travel Z: 250 mm Numerical Command CNC PHILIPS 432 Table: 700 x 270 mm Cone: SA40 Spindle speed: from 80 to 4000 RPM Year of construction: 1987 Central lubrication Manually swivel head Supplied with doc + machine parameters Voltage: 380 V Width: 2200 mm Depth: 2000 mm Total height: 2000 mm Weight: approx 1,5 T

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 65377, turning diameter over cross slide: 432 mm, turning length: 864 mm, turning diameter: 762 mm, spindle bore: 88 mm, travel distance X-axis: 287 mm, travel distance Z-axis: 864 mm, spindle motor power: 22,000 W, rotational speed (max.): 3,400 rpm, total height: 1,880 mm, total length: 3,800 mm, total width: 1,955 mm, overall weight: 7,250 kg, Equipment: rotational speed infinitely variable, The machine its "as new" Only 3000Hours CNC Controller HAAS Driven tools Turningdiameter 432mm Swing over bed 762mm Turninglenght 864mm Bar diameter 76mm Lrodpezxqx Ejfx Ac Ajt Spindle bor 88mm 12 pos turret VDI 40 Chip convyer Tool presetter

Year of construction: 2010, condition: used, functionality: fully functional, machine/vehicle number: 1510051228, Fully functional CNC machine from 2010. Viewing is possible to see the machine in operation. The buyer is fully responsible for dismantling and transporting the machine to their location. More information: 5-axis profile machining center Designed for flexible and efficient aluminum machining Autonomous clamping positioning Maximum working length: 7000 mm; 12 pneumatic clamps, also operable via a 2-station setup (2 x 3500 mm) Lredpfxoz Aki Ej Ac Aot Tool magazine with capacity for 20 tools, a 500 mm saw blade, and an angle head.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, EMCO EMCOMAT FB-450 MC | DEMO | Sinumerik 828D | Warranty Description EMCO EMCOMAT FB-450 MC – DEMO machine in like-new condition Universal CNC toolroom milling machine equipped with a SIEMENS Sinumerik 828D control. Lrjdjz Dib Topfx Ac Ast The machine was manufactured in 2019 and has never been used in production. It was used solely as a demonstration machine and has very low operating hours. The machine is in excellent, near-new condition and is offered with extensive accessories included in the price. 6-month warranty on spare parts included. The EMCOMAT FB-450 MC is a highly versatile machine suitable for toolrooms, prototype production, maintenance departments, and precise single-part or small-batch production. It allows both vertical and horizontal milling. Technical specifications Working area X-axis travel: 450 mm Y-axis travel: 350 mm Z-axis travel: 400 mm Spindle center distance: 40–440 mm Rapid traverse X/Y/Z: 5,000 mm/min Working feed X/Y/Z: 10–5,000 mm/min Feed force X/Y/Z: 10 / 10 / 15 kN Table Clamping surface: 800 × 400 mm Maximum table load: 300 kg Spindle Spindle speed: 10–5,000 rpm Spindle power: 10 kW Tool interface: ISO 40 Machine CNC control: SIEMENS Sinumerik 828D Dimensions (L × W × H): 1,980 × 2,030 × 1,990 mm Machine weight: approx. 2,270 kg Year of manufacture: 2019 Included equipment SIEMENS Sinumerik 828D CNC control Electronic handwheel Rotary table/turntable for vice Support arm for horizontal milling Installation rubber pads Side storage holders for 27 milling tools Set of 12 ISO 40 milling tool holders, including holders for horizontal milling Machine manual 6-month warranty on spare parts Condition DEMO / LIKE NEW The machine has never been used in regular production and was operated only for demonstration purposes. Machine can be inspected and demonstrated under power by prior appointment. Available for delivery.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 20,000 h, functionality: fully functional, machine/vehicle number: 274 F, turning diameter over cross slide: 65 mm, turning length: 223 mm, turning diameter: 160 mm, spindle bore: 100 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 3,000 rpm, travel distance X-axis: 115 mm, travel distance Y-axis: 69 mm, travel distance Z-axis: 230 mm, spindle motor power: 17,000 W, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 15 m/min, rotational speed (min.): 60 rpm, Equipment: documentation/manual, Multi-turret automatic lathe with numerical control (CNC), counter-spindle (sub-spindle), and motorized turret: CNC automatic lathe MUPEM WIN 6500, designed for precision machining in large series from bar stock. Robust multi-turret machine construction, equipped with a main spindle, counter-spindle (sub-spindle) with a synchronous drive device (pick-up), motorized turret, and independent front and rear transverse/vertical carriages, enabling simultaneous operations and highly efficient machining cycles. CNC control with color touchscreen (MUPEM interface), providing real-time display of the spindle, sub-spindle, turret, carriage positions (Z turret, Longitudinal, Front, Rear, Vertical 1, and 2), chuck, pick-off, and auxiliary outputs. Complete manual control panel: manual/automatic mode, speed selector (slow/medium/fast), increments (small/medium/large), feed potentiometers, and spindle speed percentage, emergency stop button, and locking key. Equipped with a bar feed system (Hydrobar LNS type loader, visible in the images), chip conveyor (Auxkal), and coolant system. Main technical features Headstock Maximum bar capacity with chuck: 65 mm Maximum chuck diameter: 160 mm Front spindle bearing diameter: 100 mm Main spindle Power: 17 kW (variable AC) Speed range: 60–3,000 rpm Turret 8 stations (1" hole), optional 6 stations (1 1/4") Maximum working travel: 230 mm Maximum feed force: 12,000 N Rapid traverse rate: 15 m/min Indexing time: 0.3 s Motorized turret 6/8 stations, 6/4 driven tools Tool holder shank diameter: 1 1/4" Maximum drill diameter: 16 mm / tap: 12 mm Motor power: 2 kW — max. 3,000 rpm Synchronous turret drive (Pick-up) Maximum clamping diameter: 32 mm Power: 2 kW — max. 3,000 rpm Transverse carriages Maximum travel: 69 mm Maximum feed force: 12,000 N Maximum longitudinal travel (6-axis version): 115 mm Vertical carriages Maximum travel: 69 mm Longitudinal adjustment: 50 mm Maximum feed force: 12,000 N Hydraulic system Pressure: 70 bar Tank capacity: 75 l Coolant system Flow rate: 30 l/min Pressure: 1.5 bar Capacity: 80 l Dimensions and weight Height from floor to spindle center: 1,135 mm Required area (approx.): 2,600 x 1,660 mm Overall height: 1,700 mm Approximate weight: 3,000 kg Included equipment Hydrobar type bar loader/feeder (LNS) Auxkal chip conveyor Coolant system Motorized turret with various clamping tools Lrodpfezk D Sisx Ac Aet MUPEM CNC control with touchscreen

Condition: used, Year of construction: 1989, Universal CNC Milling Machine MAHO MH 600 E2 Travel X: 600 mm Travel Y: 400 mm Travel Z: 450 mm Numerical Command CNC PHILIPS 432 Cone SA40 Spindle speed: from 20 to 4000 RPM Table size: 900 x 480 mm TravelSpindle sleeve travel: 80 mm Year of construction: 1989 1 lubricant tank Voltage: 380 V Width: 2500 mm Lredpfx Ajzy Rruoc Aet Depth: 2400 mm Total height: 2000 mm Weight: approx 3,5 T

Condition: used, Year of construction: 1999, operating hours: 36,151 h, functionality: fully functional, Disassembly, loading, and transport are the responsibility of the buyer. Lodpfx Aszzvxcoc Aort Sale only within the EU.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, CNC Siemens 828 D Year: 2023 • Max. diameter: 400 mm • Max. workpiece length: 550 mm • Axis travel: X-axis: 240 mm Z-axis: 600 mm Y-axis: +/- 60 mm Lrsdpjy Nzc Ejfx Ac Ast Sauter 12-position BMT turret counter-spindle bar feeder complete specifications in PDF file

Condition: excellent (used), Year of construction: 2017, CNC cylindrical / roll grinding machine KRAFT / Praise TT60-40L-C2-H, used – Ø 600 x 4,000 mm, Siemens Lrsdpfjz Ebl Tjx Ac Aet Traveling-table CNC grinder for rolls and heavy shafts up to 4,000 mm between centres and 3 t between centres. Built 2016/2017 by Praise Machinery, Taiwan, and hardly used since. Located in Einbeck (Germany), available at short notice. Inspection by appointment. Technical data (manufacturer's spec sheet): - Swing over bed: 600 mm - Distance between centres: 4,000 mm - Centre height: 320 mm - Max. workpiece weight: 3,000 kg between centres, 6,000 kg on steady rests - Control: Siemens Sinumerik CNC, Siemens drives - Grinding wheel: 760 x 100 x 304.8 mm, 45 m/s, wheel motor 22.5 kW, stepless spindle speed - X-axis travel 315 mm, 0.0005 mm/pulse; Z-axis travel 4,400 mm, 10–6,000 mm/min - Workhead speed 8–80 rpm, 11.25 kW - Tailstock quill stroke 100 mm, MT 6 - Accuracy: roundness and cylindricity 0.002–0.005 mm, Ra ≤ 0.3 µm - Hydrostatic/hydrodynamic lubrication of wheelhead and carriage - Connected load approx. 45 kW, 400 V / 50 Hz - Footprint approx. 13,000 x 2,900 x 1,800 mm, weight approx. 14.7 t Equipment: - Swivel workhead 0–90° - Electromechanical tailstock quill with foot pedal - Crowning device (type C2) - Grinding wheel guard sensor - 4-jaw chuck - 2 two-point steady rests (neck Ø 100–300 mm) - Dresser, wheel flange with puller, dial gauge, magnetic base - Coolant system with magnetic and paper band filter - Full enclosure with sliding doors, telescopic covers - Electrical cabinet with air conditioner - CE documentation, operating manual Dismantling, transport and re-installation can be arranged. Price on request.

Condition: good (used), Year of construction: 2012, functionality: fully functional, DOOSAN PUMA 2600S – CNC turning center with subspindle, FANUC, year 2012 We offer for sale a DOOSAN PUMA 2600S CNC turning center with subspindle, equipped with a reliable DOOSAN-FANUC i Series control system. The machine is in operation and can be demonstrated and tested upon request. Technical specifications: Manufacturer: Doosan Infracore Model: PUMA 2600S Year of manufacture: 09/2012 Serial number: ML0218-000034 CNC control: DOOSAN-FANUC i Series Configuration: main spindle + subspindle Max. turning diameter: approx. 376 mm Max. turning length: approx. 760 mm Main spindle chuck: approx. 10" Bar capacity through main spindle: approx. 76 mm Max. main spindle speed: approx. 3,500 rpm Main spindle power: approx. 18.5 / 22 kW X-axis travel: approx. 260 mm Z-axis travel: approx. 830 mm Turret: 12 positions Automatic subspindle for complete part machining Chip conveyor Rated machine power: 40.7 kVA Power supply: 200/220 V, 3 phases, 50/60 Hz Machine weight: 5,400 kg Robust CNC turning center suitable for both series and single-piece production. Thanks to the subspindle, it enables machining of the part from both sides without the need for manual switching between individual operations. Lrodpfoz Dq Inox Ac Aot The machine is currently powered on and can be demonstrated in operation.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, X-axis: 2000mm Lodpsz Ei Dqefx Ac Asrt Y-axis: 1200mm Z-axis: 1500mm Table surface: 2200x1200mm Number and width of T-slots: 7x22mm Distance between T-slots: 140mm Max. workpiece weight on the table: 7.2t Approx. 5000 spindle hours