Used Climatic Test Chamber for sale (16,090)

Condition: used, Universal Static Material Testing Machine AllroundLine with Two Test Spaces Tensile Testing Machine, Compression Testing Machine ZWICK / ROELL Type 1474 / 01 Year of manufacture: 1984 / 2003 Type: 01 . 96255/03 . 112137 Design: Universal Testing Machine Test force: 100 kN (10 t) Test area height: 1460 mm Iedpfx Asxantceacebc Test area width: 430 mm Traverse path max.: 1200 mm Test speed max.: 250 mm/min Power supply: 400 Volt, 50 Hz (L1/PE/N) Rated current: 10 A Motor power: 4.4 kW Interface: RS485 - Control system retrofit in 2003 - For tensile, compression, and bending tests on material samples, components, and assemblies - Data output via RS485 - 1 load cell for measuring compressive and tensile forces included. The machine is sold without PC and software; only the installed load cell is included in the scope of delivery. Required floor space (W x D x H): 1150 x 800 x 1960 mm Weight: 820 kg Good condition

Condition: excellent (used), S & A Test Chamber Here we offer you a S & A test chamber for parametric testing. Temperature range -55 ° C to 200 ° C (LCO2) -65 ° C to 200 ° C (LN2) Temperature change rate 15° C / min (Standard Option) Ibjdpfjn Arl Ssx Aacoc 60° C / min (Fast Option) Stability ± 0.2 ° C (including effects of mains voltage, ambient temperature between 15° and 45° C and aging) Uniformity ± 1.0 ° C Max from -65 ° C to -55 ° C ± 0.5 ° C Max from -55 ° C to + 125 ° C ± 1,0 ° C Max from + 125 ° C to + 200 º C Coolant: LCO2 Chamber can be controlled remotely via IEEE bus or RS232C interface Weight approx. 61 kg Type: 4365A Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), Year of construction: 2005, functionality: fully functional, (2x) Climate chamber for stability tests The system for storing stability samples consists of 2 climate chambers. 2 climate chambers are supplied by an electrical control cabinet and have separate circuit diagrams. The climate chambers are based on cooling cells from Viessmann. The climate chambers are dimensionally identical and equipped with stainless steel shelves. The climate chambers were connected to a measured value recording system. This is currently not available for the system. However, a connection to a building management system is basically possible and prepared. The entire system was taken out of service in 2024 and finally qualified. The qualification documents can be made available on request. The delivery and installation of the system as well as the technical service were carried out exclusively by ThermoTEC. The client offers the objects mentioned EXW Ex Works "ex works". This means that the dismantling and loading of the objects is the responsibility of the buyer. The system essentially consists of: Ibodovpu Tlepfx Aacec 2 constant climate chambers made of 80mm PU elements, stainless steel floor and single-leaf revolving door with frame heating 2 chamber fittings for air conditioning consisting of: -Fans for circulating the chamber air -Direct evaporation register with refrigerant R404A, for cooling and dehumidification -Electric resistance heating 2*1.5kW Cold steam inlet hoses from the ultrasonic humidifier 2 air-cooled refrigeration condenser units for cooling and dehumidifying the climate chambers. 2 ultrasonic humidifiers with an output of 1kg/h Switch cabinet for controlling and regulating the climate chambers The circulating air of the constant climate chambers is sucked in via the air conditioning unit, processed and blown out via the front. The temperature and humidity sensor mounted in the intake area transmits the actual values of the test room to the respective control circuit of the climate chambers. An independent process controller is installed in the control cabinet front for each control circuit (temperature/humidity). The controllers control the following functions as required: > HEATING with electric resistance heating > COOLING with refrigeration unit and direct evaporation > HUMIDIFICATION with ultrasonic humidifier > DEHUMIDIFICATION with refrigeration unit and direct evaporation The climate chamber temperature and humidity are controlled automatically. Cell type: Tecto cooling and deep-freezing cell Standard WL80 VIESSMANN Dimensions of the climate chambers (KK) 2 each: Outside (WxDxH): 2100 x 3000 x 2310 mm Door dimensions (WxH): 800 x 2000 mm Inside (WxDxH): 1940 x 2840 x 2140 mm Climate chamber 1 25°C/60%RH - A0429_00 - Year of construction: 2005 Climate chamber 2 25°C/60%RH - A0430_00 - Year of construction: 2005

Condition: like new (used), Year of construction: 2021, operating hours: 300 h, functionality: fully functional, We are selling a large, walk-in heat chamber. The chamber was used for 24-hour burn-in tests at 60°C for electronic devices. Due to a production relocation, it is now being sold. The chamber can be temperature-controlled within a range of 40°C to 80°C, with a constant temperature of +/- 1°C. The chamber's floor space is approximately 13.5m² with a volume of approximately 29.2m³. For details on the size, see the attached dimensional drawing below. The delivery and installation of the system, as well as technical service, were carried out exclusively by ThermoTEC. We offer the chamber EXW "ex works." This means that disassembly, loading, and transport of the chamber are the responsibility of the buyer. The system essentially consists of: - Insulation chamber made of 120mm thick sandwich elements with excellent thermal insulation - 1.5mm thick, non-slip stainless steel floor bonded to 15mm thick pressure distribution plates (designed for a rubber wheel load of 2500N) - Door (approx. 200cm high and 120cm wide) with access ramp and window - Recirculation unit with 6 kW heating output and approx. 3000m³/h air circulation - Switchable external ceiling lighting (50W LED) - Parapet ducts on both sides with 6 sockets (230V) - Control cabinet with Siemens S7-1200 controller with 7" color touch panel, data recording and display, prepared for external networking, potential-free switching contacts Ibjdpfx Aaewk Nahecoc - Safety devices Dimensions of the heating chamber: External (W x D x H): 3200 x 4800 x 2400mm Door dimensions (WxH): 1200 x 2000 mm Inside (WxDxH): 2960 x 4560 x 2160 mm

Condition: used, Static Universal Testing Machine AllroundLine with two test chambers Tensile Testing Machine, Compression Testing Machine ZWICK / ROELL Type AllroundLine Z010 / TH2S Year of manufacture: 1996 Model: BZ010TH2S . 132583/96 . 406678 Ibjdpfxsxanrxs Aacsc Design: Benchtop testing machine Test force: 10 kN (1000 kg) Test chamber height: 1458 mm Test chamber width: 440 mm Crosshead speed: mm/min Drive travel resolution: 0.0625 µm Repeatability accuracy: ±2 µm Motor power: 500 W Power supply: 230 Volt, 50 Hz Rated current: 3 A Power consumption: 800 VA Interface: RS485 - For tensile, compression, and bending tests on material specimens, components, and assemblies - Equipped with TH2S control unit (machine controller) - Data output via RS485 - 1 piece load cell for measuring compression and tensile forces, AST Type KAF-W (Angewandte System Technik GmbH, year 2013) The machine is sold without PC and without software, only the described load cell is installed. Space requirement (W x D x H): 1000 x 650 x 1920 mm Weight: approx. 220 kg Good condition

Condition: excellent (used), Liebisch Type: S 1000 A-TR / 42016211 Chest-mounted units with a 1000-liter test chamber volume for salt spray testing. Constamatic® TR This series includes automatically controlled chest-mounted units of type A-TR. The internal controls are operated via a touchscreen. All functions are displayed on a touchscreen with intuitive user guidance. Technical specifications: Device type: S 1000 A-TR External housing dimensions: (W x D x H in mm) 2600 x 1120 x 1210 Internal test chamber dimensions: (W x D x H in mm) 1535/1425 x 800/780 x 660/650 Max. sample holder load: 10 kg / level 10 kg Operating voltage: 230 V +6/-10% Power consumption S: 2700 W Humidity control range. S: up to / 70°C Isdjwf Dh Nopfx Aacsbc Test chamber control range K: up to / 50°C Test chamber control range S: up to / 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Overtemperature protection: yes Test chamber volume: 1000 liters Test solution storage capacity: approx. / 150 liters Test solution consumption per hour: approx. / 0.7 - 1.0 liters Water filling of base pan KON: 15 liters Weight: 450 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, This listing is for the LABCOLD RLDF1520 Climatic Class 4 Refrigerator The unit is in full working condition and is ready for immediate use The LABCOLD RLDF1510 is a pharmacy / vaccine‑grade refrigerator designed for storage of temperature‑sensitive medicines, vaccines, or biological materials Some of its key specs and features: Feature Specification / Detail Capacity ~ 430 litres Ibjdpfexhdthex Aacoc External Dimensions (H × W × D) 1860 mm × 600 mm × 700 mm Temperature Operating Range +2 °C to +8 °C (nominal operating ~5 °C) Control / Monitoring “IntelliCold™” controller, 24/7 temperature logging, alarms (high/low temp, door open, power failure) Insulation / Construction Enamelled steel exterior, corrosion‑resistant painted aluminium interior; fan‑assisted cooling; off‑cycle auto defrost Door Type Solid door (non‑glass) version Other Features Door lock with keys, access port for probe, remote alarm contacts, data storage (13 months) Power / Energy Use Often quoted ~ 5.52 kWh/24h (for a 440 L variant/related model) In short: this is a robust, regulated refrigerator intended for cold chain use (i.e. storage of medicines, vaccines, biologics) rather than for general domestic or food us

Condition: used, Concrete sample press for concrete and material testing Flexural strength test Iedjxb Nv Ujpfx Aacobc Determination of compressive strength

Condition: used, Mecmesin Ultra Test Universal Testing Machine + AFG 100N Force Gauge (Max Load 1000N) Description: For sale is a Mecmesin Ultra Test Universal Testing Machine with a maximum test force of 1000 N (≈ 100 kgf). The scope of delivery includes a Mecmesin AFG 100N (Advanced Force Gauge), which serves as the force measurement module and display unit. The system is suitable for a wide range of tensile and compression tests in the fields of plastics, packaging, food products (e.g. dough), textiles, electronics, and adhesive testing. Technical specifications (Ultra Test): - Maximum test force: 1000 N Ibodpfsw Svtijx Aacjc - Test methods: tensile and compression tests - Motorized test stand, adjustable speed - Typical travel: approx. 500–1000 mm - Positioning accuracy: ±0.1 mm - Control directly via the AFG Technical specifications (AFG 100N): - Measuring range: up to 100 N (≈ 10 kgf) - Resolution: 0.01 N - Accuracy: ± 0.1% of the measured value - Measurement types: tension and compression force - Peak-hold function, live display - Interfaces: RS-232 / USB (depending on model) Condition: used Scope of delivery: (See picture) (Specifications may be subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: good (used), Hardness tester functional Iedew R Sr Sopfx Aacjbc

Condition: excellent (used), Two-chamber stainless steel tank 66m3 (40 + 26 m3) DIMENSIONS: - Diameter: 3,245 mm - Height: 13,053 mm Year of manufacture 2006 Weight: 4,680 kg Upper part: 40° slope - Lower part: 2% slope. DN 600 hatch with hinged cover at the top. stainless steel pressure-vacuum valve At the bottom, a DN400 hatch with a hinged cover a stainless steel pressure-vacuum valve Upper tank heating: 6 coils, exchange surface 6.95 m2, PS 2 bar Above 2 coils, exchange surface 2.33 m2, PS 2 bar Ibedpfx Ajvlpctoacec A device for moving grounds, test valve Lower tank heating: 4 coils, exchange surface 4.64 m2, PS 2 bar. Above: 2 coils, exchange surface 2.33 m2, PS 2 bar. Liquid level gauge 555x432 rectangular hatch DN70 ball valve The tanks were used in the wine industry. The tanks have a technical drawing. The tanks are dismantled and ready for delivery.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 4NTV88BXIHR, overall weight: 848 kg, fuel type: diesel, tank capacity: 190 l, color: red, power: 16 kW (21.75 HP), output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 16 kW (21.75 HP), nominal power (apparent): 20 kVA, continuous power: 16 kW (21.75 HP), continuous power (apparent): 20 kVA, total length: 2,150 mm, total width: 1,040 mm, total height: 1,550 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Yanmar, type of cooling: water, fuel consumption (combined): 3 l/100km, fuel consumption (urban): 3 l/100km, fuel consumption (extra-urban): 3 l/100km, fuel: diesel, fuel tank capacity: 190 l, battery capacity: 100 Ah, battery voltage: 12 V, input voltage: 380 V, input frequency: 50 Hz, input current: 32 A, operating temperature: 25 °C, ambient temperature (min.): -25 °C, ambient temperature (max.): 45 °C, control cabinet height: 1,550 mm, control cabinet length: 2,150 mm, control cabinet width: 1,040 mm, noise level: 65 dB, protection type (IP code): IP65, rotational speed (min.): 1,500 rpm, temperature: 25 °C, type of input current: three-phase, warranty duration: 12 months, Equipment: documentation/manual, mobile diesel tank, De Bredenoord 20 KVA generator is een betrouwbare en veelzijdige oplossing voor tijdelijke en langdurige stroombehoeften in diverse omgevingen. Het aggregaat is ideaal voor mobiel gebruik en voldoet aan de emissie-eisen van Stage V. De efficiënte Yanmar motor, gecombineerd met een Stamford generator, levert uitstekende prestaties en lage operationele kosten. De generator is uitgevoerd in een geluidsisolerende omkasting die zorgt voor een minimale geluidsuitstoot, ideaal voor gebruik in geluidsgevoelige omgevingen (super silent). De kast is voorzien van dikke, oliebestendige geluidsisolatie en externe stekkerdozen met zekeringautomaten voor extra veiligheid. Met een brandstoftank van 190 liter heeft de generator een autonomie van maximaal 48 uur bij continu gebruik. Het systeem werkt op diesel, HVO of GTL brandstof, wat zorgt voor flexibele brandstofopties. ### Technische Specificaties: - Model: Bredenoord 20 KVA - Nom. vermogen: 20 KVA - Max. vermogen: 20 KVA - Motor: Yanmar 4TNV88BXIHR - Generator: Stamford borstelloze alternator (AVR) - Vermogen: 20 KVA - Voltage: 230/400 V, 50 Hz - Toerental: 1500 tpm - Geluidsniveau: 65 dB(A) op 7 meter - Brandstoftank: 190 liter - Autonomie: - 100% PRP: 40 uur - 70% PRP: 56 uur - Motorvermogen: 16 KW - Batterijlader en motorverwarming: Standaard aanwezig - Control panel: Comap MRS16 (auto start/stop) - Afmetingen (L x B x H): 3,38 m x 1,03 m x 1,5 m - Gewicht: 848 kg - Emissieklasse: Stage V ### Brandstofverbruik: - 100% PRP: 4.7 L/h - 70% PRP: 3.42 L/h - 50% PRP: 2.3 L/h ### Opties: - Motorverwarming - Batterijlader - 3-weg brandstofkraan - XXL brandstoftank Geluidsdemping: De generator is ontworpen met geoptimaliseerde luchtinlaten en speciale isolatiematerialen die geluid minimaliseren. De geluidsisolatie is versterkt met wol van verschillende diktes om geluid over een breed frequentiespectrum te reduceren. Dit maakt het ideaal voor gebruik in geluidsgevoelige gebieden. Duurzaamheid: Ijdpev Rnciefx Aacsbc De omkasting is bestand tegen corrosie dankzij een verflaag die getest is voor meer dan 2000 uur (C5I-H). Dit zorgt voor een lange levensduur, zelfs in de meest uitdagende omstandigheden. Veiligheid: De generator is uitgerust met versterkte sloten en roestvrijstalen scharnieren. De deuren zijn ontworpen met een afgeschuinde hoek van 20 graden om waterophoping te voorkomen en oxidatie te minimaliseren. Transport en Verplaatsing: De generator is gemakkelijk te verplaatsen dankzij versterkte hijsogen en stalen balken, die zorgen voor eenvoudig transport op bouwlocaties. Het ontwerp zorgt voor een stabiele en veilige verplaatsing van de generator zonder risico op schade. Klantspecifieke Aanpassingen: De Bredenoord 20 KVA generator is beschikbaar in verschillende uitvoeringen, van 20 KVA tot 500 KVA. Klantspecifieke aanpassingen zijn mogelijk, waardoor de generator kan worden aangepast aan specifieke eisen en toepassingen. Certificeringen: - CE-gecertificeerd - Europese makelij Toepassingsgebieden: De generator is geschikt voor diverse sectoren, waaronder de bouw, industrie en andere toepassingen waar betrouwbare en efficiënte stroomvoorziening vereist is.

Condition: defective spare-parts repository (used), functionality: limited functionality, Test listing Ibedpfsw H Ar Nox Aacoc

Year of construction: 2024, condition: new, functionality: fully functional, IMPORTANT: delivery time (ex works) approx. 3 weeks Roller glue application units for edge banding machines require regular cleaning, service and maintenance. Wood chips, burned glue particles and other contaminants behind the glue roller won't allow an even and thin glue film on the roller. Hence there won't be an ideal glue application to the board. This is valid for EVA hot-melts and even more so for PUR glues. As long as the glue application unit is still inside the machine the limited accessibility will restrict maintenance success and also result in longer down time. If the application unit is removed the quick cooling-down will prevent thorough cleaning. Furthermore the lack of a proper fixing device and a drive motor for the glue roller are other disadvantages. Technical Data: - 2-temperature control (2 channels) with easy to read display - Heating target temperature and drive starting temperature can be set individually - Glue roller speed: 60 rpm - 2 straight wheels, 2 turnable wheels with brake - Main supply connection cable: 10 m - Power supply: 380(400) V, 50/60 Hz - Installed power: approx. 2 kW (max) - Dimensions  L x W x H:  60 x 50 x 100 cm - Weight: ca. 60 kg - Painting in light grey RAL 6035 u. traffic blue RAL 5017 Technical documentation with operating instructions, spare parts list and wiring diagram are included in the scope of supply. Iodpfxotmviis Aacsbc

Condition: excellent (used), machine/vehicle number: 577EK51, REF: MM6187 1 x Webomatic double chamber vacuum packing machine supplied with 16 x filler plates. Ijdpfxexn Rz Es Aacjbc Technical specification ⚙️ ✅ Model - ED 120. ✅ Serial number - 577EK51. ✅ Sealing bars - 4 x 640mm long. ✅ Distance between sealing bars - 580mm. ✅ Vacuum pump - Busch RA 0100 E 5Z1. ✅ Electrical requirements - 400 V / 50 hz / 3 phase. ✅ Power - 2.2 kW / 5.4 Amps.

Condition: used, Year of construction: 1988, Reaction tank, batch system, solids separator, washing trough, painter's washing area, water treatment, tool and water cleaning, filter press, chamber filter press -Manufacturer: Poligrat, chamber filter press type 470-20/2 -Model: 11 panels -Hydraulic Cylinder: Stroke: 115mm -Dimensions: 1315/920/H1720 mm -Weight: 580 kg Ibodpfx Ajhvfznsacoc

Condition: used, Huda Technology HUD-G809 Drop Shock Test System Isdsxmiilepfx Aacjbc The system is also suitable for testing batteries. Max load: 100 kg Table size: 500 mm x 600 mm Peak impact acceleration range (half-sine wave): 150 - 6000 m/s² Pulse duration (half-sine wave): 0.5 - 30 ms If the pulse duration is less than or equal to 3 ms, the tolerance for peak acceleration is ±20%; the tolerance for pulse duration is ±15%. If the pulse duration is greater than 3 ms, the tolerance for the waveform should comply with the range specified in the standard. Velocity tolerance: ±15% Hydraulic brake prevents secondary impact. Overall table dimensions: 1000 x 750 x 2450 mm Weight: 3600 kg Power consumption: 5.5 KVA 380V ±10% AC 50 Hz Condition: used (We reserve the right to make changes and correct typing errors in technical data and specifications!) If you have any other questions, we would be happy to answer them by phone.

Condition: used, mileage: 210,000 km, Year of construction: 2011, Serial number: YV2J1E1C5BA71xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21177 Specifications: EU approved until: 08.10.2025 Mileage: approx. 210,000 km Engine: 370 hp, Euro 5T Transmission: Fully automatic Suspension: Air – air Tires: In good condition Superstructure: 2011 Zoeller/SKK Ekopres P1453 Medium XL Autolift Roof bar with warning lights Indicators front and rear Exhaust outlet above cab Camera LED work lights Autoline sand spreaders 3 seats Air conditioning Description:1-chamber refuse compactor truck with pusher axle.Equipped with Autolift and sand spreaders.Handles waste bins up to 660 liters.Low mileage and good tires.Ready for delivery. Km: 210000 HK: 378 Technical approved: no EU-approved until: 08.10.2025 Own weight: 16000 Total Weight: 27000 Payload: 10925 Width: 255 Length: 912 Ibsdow Sc N Dspfx Aacec Euro: 5 Model: FM370 6x2 1-kammer komprimatorbil med Zoeller påbygg Gearbox: Automatic

Condition: like new (used), functionality: fully functional, ESD-PROTECT TOM 8600 TERA Ohmmeter ESD Test Set LIKE NEW: Ijdpfow Ebh Hjx Aacsbc - For measuring surface and resistance to ground, as well as humidity and temperature measurement - 2 measuring electrodes ME10 - Electrostatic Field Meter EFM 823 - HV Charger CPS 822 - Like new from 2023 (used once) - Original price: €2,900 net plus VAT - Accessories as pictured - Supplied in a lockable transport case Shipping available for an additional €23.90. #8303

Condition: good (used), BALZERS LTE 020 – Thermally Controlled Sample Preparation Station ✔ Use in: Coating technology, semiconductor processing, surface analysis, electron microscopy Ibjdpfx Aexl A Edjacsc • Digital display unit with 4 channels (B1–B4) • Temperature display in °C • Adjustable via SET / UP / DOWN • Separate controls for mains and lamp • Power supply: 220V Note: For detailed technical specifications and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. You can find more items – new and used – in our shop! International shipping costs upon request!

Condition: used, El. heated chamber oven Nabertherm Type: N 500 / 45 HA Air flow: horizontal Temperature: max. 450°C Connected load: 28 kW Clear dimensions (W x D x H): approx.790 x 1000 x 760 mm Ibjdsxmhhaopfx Aacoc

Condition: used, Liebisch KEA 300 Constanzo Functional condensate water test device for material and coating testing Description: This device is designed for performing condensate water or water vapor tests in accordance with common standards (e.g., DIN EN ISO 6270). It is ideal for testing the moisture and corrosion resistance of coatings, paints, metals, and plastics. The design is robust, low-maintenance, and perfectly suited for research, laboratory, and quality control applications. Technical specifications: Manufacturer: LIEBISCH Model: KEA 300 Constanzo Nominal power: 1,400 W Chamber dimensions: approx. 500 × 450 × 500 mm (W × H × D) Voltage: 230 V / 50 Hz Chamber material: Stainless steel, corrosion-resistant Controls: None / manual operation Important notice: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See image) (Subject to changes and errors in technical data; specifications may be updated!) If you have any further questions, feel free to contact us by phone. Ibodpoxlzm Tofx Aacjc

Condition: good (used), Heraeus K 750/1 Tempering Furnace / Laboratory Furnace / Chamber Furnace For sale is a used K 750/1 tempering furnace from Heraeus. Technical Details: Manufacturer: Heraeus Model: K 750/1 Design: Tempering Furnace / Laboratory Furnace / Chamber Furnace Max. Temperature: 750 °C Heating Output: 3.6 kW Ibsdjxly A Hepfx Aacoc Voltage: 400 V (three-phase) Areas of Application: Laboratory, Industry, Workshop, Heat Treatment, Metalworking Condition: Used, Working Buy Heraeus K750/1 tempering furnaces and other items at affordable prices – Here you can buy products from professionals for professionals – You'll find other attractive offers in our SHOP.

Condition: excellent (used), Type: WKL 100/40 Climate Test Chamber, Air-Cooled with Humidity Control, -40 to +180°C Specifications for Temperature Testing: Temperature Range: -40 to +180°C Temperature stability at steady state: Temporal fluctuation in center of workspace: ±0.3 to ±1 K Spatial deviation: ±0.5 to ±2 K Rate of temperature change: Heating: 3.5 K/min Cooling: 5 K/min Heat compensation capacity: max. 1100 W Specifications for Climatic Testing: Humidification System Data Reservoir capacity: approx. 13 l Water quality: Demineralized pH value: 6 – 7 Conductivity: max. 20 μS/cm Water consumption at constant temperature +40°C, 92% r.H.: 2 l / 24 h Temperature range: +10 to +95°C Humidity range: 10 to 98% r.H. Temperature and humidity variation (steady state): Temporal temperature fluctuation in center of workspace: ±0.3 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 K Temporal humidity fluctuation in center of workspace: ±1 to ±3% r.H. Mechanical Load Data: Maximum load on chamber floor: 25 kg Per shelf: 10 kg Ibodpjxhf Erjfx Aacjc Total shelf load: 50 kg Access port: 50 mm diameter Interfaces: Ethernet interface (RJ45), USB interface Operational Data: Chamber lighting: Halogen bulb 24V, 50W Rated voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated power: 3.0 kW Rated current: 13.0 A Required fuse: 16A slow blow Protection class: Control cabinet IP 22 and operator panel IP 54 Heat Emission for Air-cooled Test Chambers: Max. heat emission to ambient: 2000 W Noise Measurement: Sound pressure level (free field), measured at 1 m in front and 1.6 m high: approx. 56 dB(A) Chamber Volume: approx. 100 liters Weight: 190 kg Refrigerant: R404A Important Safety Information for Buyers: The following procedures are performed in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See photo) (Changes and errors in technical data and specifications reserved!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet Used to test water ingress into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated recirculation system reduces water consumption to a minimum. Isdpjxg Hrkjfx Aacobc Features - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swivel and interchangeable nozzle holders - Adjustable and measurable water flow rate - Test duration control Data for mechanical load: - Max. load with test specimens (evenly distributed): Permissible total weight for specimen carrier: 25 kg - Spray radius: 200 mm / 400 mm Data for IP protection class tests - Oscillation speed approx. 60°/s - Oscillation angle IPX3 approx. ±60° - Oscillation angle IPX4 approx. ±180° -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External dimensions (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Further questions can be answered by phone.