Used Trumpf Quicksharp for sale (375)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 35,623 h, machine/vehicle number: A1225A0041 / L20, controller model: SINUMERIK 840D SL, laser power: 3,200 W, sheet thickness (max.): 20 mm, working length: 3,000 mm, working width: 1,500 mm, The machine was exclusively serviced by Trumpf until 2023 as part of a maintenance contract. TECHNICAL DETAILS Working length: 3,000 mm Working width: 1,500 mm Working height: 115 mm Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 115 mm Maximum workpiece weight: 900 kg Sheet thickness steel max.: 20 mm Sheet thickness stainless steel max.: 12 mm Sheet thickness aluminum max.: 8 mm Sheet thickness max.: 20 mm Feed rate X-axis: 100 m/min Feed rate Y-axis: 200 m/min Feed rate Z-axis: 80 m/min Cutting speed: 140 mm/min Positioning speed X/Y-axis: 140 m/min Repeat accuracy: 0.05 mm Smallest programmable step: 0.001 mm MACHINE DETAILS Laser type: CO₂ laser Laser source manufacturer: Trumpf Laser source model: TruFlow 3200 Laser power: 3,200 W Laser wavelength: 10,600 nm Cooling type: Water Control type: CNC control Control manufacturer: Siemens Control model: SINUMERIK 840D SL Automation level: Semi-automatic Operating type: Electric Input voltage: 400 V Input current: 100 A Input frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 6,500 x 7,600 x 2,200 mm Total weight: 12,000 kg Laser hours NC control: 35,623 h Laser hours resonator / pump 1: 34,258 h Laser hours beam on / pump 2: 10,155 h EQUIPMENT CE marking Dcedpozyakgofx Aa Hel Central lubrication system Cooling unit Documentation / manual Dust extraction Emergency stop switch Safety light curtain

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 43,824 h, control type: CNC control, degree of automation: automatic, controller model: siemens 840d, laser type: CO₂ laser, laser source manufacturer: trumpf, laser power: 5,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, table length: 6,000 mm, table width: 2,000 mm, feed rate X-axis: 330 m/min, feed rate Y-axis: 300 m/min, type of cooling: water, total length: 6,000 mm, total width: 2,000 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, - TruLaser 5060 (L19) - 6000x2000mm - Single head, 250mm - Automatic pallet changer - Longitudinal conveyor belt - 5000W - CE marking Dsdpfxozy U Rze Aa Hocl - Automatic nozzle changing system - Pallet changer cleaning brush - Cooline - Right-hand installation possible - Transverse conveyor belt - External loading and unloading interface (automation not included) Disassembly (not included)

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: B0104A0167, functionality: fully functional, operating hours: 29,966 h, pressing force: 130 t, stroke length: 215 mm, overall weight: 11,250 kg, 6 controlled axes Dcsdpfxszy Ryxo Aa Hol Includes new tools worth €12,000!!! Everything is fully functional.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 10,020 h, pressing force: 173 t, controller manufacturer: TRUMPF, controller model: TASC 6000, Press brake manufactured in 2017. This TRUMPF TRUBEND CELL 5000 with TRUMPF TruBend 5170 features a maximum press force of 1700 kN and a stroke length of 445 mm. It includes the BendMaster 60 robot for automated handling and a TRUMPF TASC 6000 control system for efficient programming. If you are looking to get high-quality bending capabilities, consider the TRUMPF TRUBEND CELL 5000 press brake we have for sale. Contact us for further details. - Press Brake Model: TruBend 5170 (Extended Version)- Press Brake Max Press Force: 1700 kN- Press Brake Max Working Pressure: 340 bar- Press Brake Length of Stroke: 445 mm- Press Brake Voltage / Frequency: 400 V / 50 Hz- Press Brake Connected Load: 29 kVA- Press Brake Control Voltage: 24 V- Robot Model: BendMaster 60- Robot Connected Load: 17 kVA- Robot Weight: 2600 kg- Robot Voltage / Frequency: 400 V / 50 Hz- Control System: TRUMPF TASC 6000 (Graphical workshop programming, network capability)- Included Equipment: Extended version press brake, BendMaster 60, automated material handling/grippers, fencing and safety enclosuresTRUMPF BENDMASTER 60- Working Hours: 56,582 h (As of 14.05.2025)- Load Capacity: 60 kg (Sheet metal piece plus gripper)- Sheet Metal Capacity: Up to 40 kg- Supply Voltage: 400 V (3~ Phase)- Frequency: 50 Hz- Connected Load: 14 kVA- Control Voltage: 24 V- Max. Fuse Rating: 32 A- Manipulator Axis System: 6-axis backgauge sensor system- Floor Track: Ground track rail extended to 10 m- Control Unit: PC-based TRUMPF control with terminal (Monitor, mouse, keyboard)- Material Handling Features: Contour recognition sheet sensor, double sheet detection sensor, rotary union for rapid tool-less gripper exchange, gripper coupling on BendMaster- Included Vakuum/Gripping Gear: 3 modular vacuum grippers without separation unit, 1 mechanical tong gripper with rotary axis (including 3 sets of additional jaws)- Feeding Station: 1 sheet extraction station with linear axis- Peripheral Accessories: 1 gripper changing console (max. 4), 1 mobile fanning magnet, safety enclosure fence with access door Technical Specification Bending Length 4250 mm Dcodpfxeza U Nfs Aa Hsl

Condition: used, functionality: fully functional, Year of construction: 2008, No minimum price – guaranteed sale to the highest bidder! Djdpfx Aaezy Ullo Hjcl The machines are still assembled but disconnected from the power supply. An 11-ton forklift is available on-site for loading. For sale is a laser welding system manufactured by TRUMPF, model: TLC 1000P.

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, operating hours: 36,000 h, laser source manufacturer: TRUMPF, laser power: 4 W, overall weight: 13,140 kg, total length: 9,300 mm, total width: 4,600 mm, Manufacturer: TRUMPF Dcsdpfx Aaozy Huxs Hjl Type: TRUMATIC L 3030 Year of manufacture: 2008 Table dimensions: 3000 x 1500 x 115 mm Power: 4000 Watts Control system: Siemens Sinumerik 840 D Max. thickness of sheet metal that can be cut / steel: 20 mm Max. thickness of sheet metal that can be cut / stainless steel: 15 mm Max. thickness of sheet metal that can be cut / aluminum: 10 mm Max. cutting speed: 60/85 m/min Accuracy: +/- 0.1 mm Length: 9,300 mm Width: 4,600 mm Height: 2,000 mm Weight: 13,140 kg

Condition: good (used), functionality: fully functional, Year of construction: 2017, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control system: Basic Rexroth IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Closed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamping jaws and tools - Drives with maintenance-free three-phase motors - Follow-up device with programmable clamping beam - Foot pedal for clamping jaw closure - Beam protection - Dividing chute on the right - Part flap on the left - Sensor for part flap - Work area lighting - FocusLine - Protective tool TRUMPF Laser - Solid-state laser TruDisk 3001 with one laser beam cable (LBC) output - LBC according to standard layout (10 m) - Laser power control - Laser logbook function - Enclosed beam guidance via laser beam cable (LBC) The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (lasers covered under 6A005). Compact cutting unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punch head - Delta Drive - Rotatable mono-tool holder - Programmable clamping beam position - Tool length compensation - Spray lubrication for the punch - Scrap extraction - Forming function Dodpfx Aozy Hpiea Hecl - Stroke counter for the punch Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Teleservice interface via Internet - Automatic shutdown including wake-up function - Program management - Production plan Data transfer - USB interface - RJ45 network connection - Central Link Safety - CE marking - Multi-beam light curtains - Protection against scattered radiation Extended laser equipment - Copper cutting package - Brass cutting package Extended punching equipment - MultiTool function - MultiBend function - Thread forming function with thread counter - Signing/fast beading function - Engraving function - Deburring and rolling technology function - Adaptive stroke calibration - Spray lubrication for the die and level monitoring - Smart Punch Monitoring Part removal - Integrated sorting function for dividing chute - Sensor for dividing chute - Container track for 4 standard containers - Containers supplied by the customer Special sheet metal processing - Brush tables - Loading and unloading aid for brush tables Options Compact dust collector - CO2 extinguishing system for the compact dust collector Data transfer - Wireless operation point SheetMaster Compact 2500x1250mm (AK05) - Suction frame - Unloading trolley for scrap grid and microjoint sheets - Loading station with spreader magnet for separating sheets - Double sheet detection - Vacuum sensor - 2nd operator station for loading and unloading - Compact installation (double-wing swing doors) - Peeling system

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, laser power: 3,200 W, sheet thickness (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Combined punching/laser operation: 3,000 mm × 1,500 mm Punching operation: 3,000 mm × 1,500 mm Laser operation: 3,000 mm × 1,500 mm Working area without repositioning: Large format Sheet metal thickness, structural steel max.: 8 mm Sheet metal thickness, stainless steel max.: 8 mm Sheet metal thickness, aluminum max.: 4 mm Maximum punching force: 220 kN Maximum punching speed (at 1 mm stroke): 900 strokes/min Maximum marking speed: approx. 2,800 strokes/min Maximum axis speed: 108 m/min Axis speed: simultaneous in X and Y axes Tool magazine: Linear magazine with multi-tools Maximum number of multi-tools: 18 Clamps: 3 Tool positions: 180 MACHINE DETAILS Laser source: Trumpf TruFlow 3200 CO₂ laser Laser power: 3,200 W Dsdpfx Aajzyay Is Hscl Operating hours (as shown in the photo) Beam on hours: 12,716 h Laser on hours: 73,705 h EQUIPMENT SheetMaster with two large-format tables Automatic scrap sheet disposal onto lifting table

Condition: ready for operation (used), Year of construction: 2002, operating hours: 23,182 h, punching force: 22 t, sheet thickness (max.): 8 mm, overall weight: 17,500 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, This 4-axis TRUMPF Trumatic 5000 R was manufactured in 2002. It features a maximum punching force of 220 kN and includes a Siemens Sinumerik control interface. The machine comes with a TRUMPF Quicksharp tool grinding machine and a large selection of punches, dies, and accessories. If you are looking to get high-quality punching capabilities, consider the TRUMPF Trumatic 5000 R CNC punching machine we have for sale. Contact us for further details. - Power Supply: 400 V / 50 Hz- Connected Load: 29 kVA- Control Voltage: 24V DC- Required Fuse Protection: 3x50 A- Compressed Air Connection: 7-14 bar- Additional Equipment: TRUMPF Quicksharp tool grinding machine, large selection of punches, dies, and accessories.- Reported Issues: Error message present; requires replacement of either Power module (18/36A 2-axis) or feed control (2-axis version). Dcjdpfozx Sw Nex Aa Hjl

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 21,158 h, machine/vehicle number: A0217E0103, control type: NC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser hours: 21,158 h, laser power: 2,000 W, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 16 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 6 mm, table length: 3,000 mm, table width: 1,500 mm, Equipment: centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, The showcased laser cutting machine is in very good technical condition. It has been used exclusively in our production facility since new. The machine is currently in operation, so it can be demonstrated while running without any issues. It has been regularly serviced by qualified technicians and cleaned of current contaminants. The offered laser cutter is ready for immediate use and reports no errors or faults. Dodpfx Asy Sgmnja Hscl

Year of construction: 2018, condition: excellent (used), functionality: fully functional, We are offering a high-productivity 3D printer designed for industrial serial production. The system was last used with AlSi10Mg aluminum powder. The 3D printer has already been dismantled by the manufacturer. Dismantling and functional reports are available, confirming the machine was operational prior to dismantling. All axes have been professionally secured for transport. The machine can be transported on a standard truck. TruPrint 5000 G4 Serial number S0731C0008 Year of manufacture: 08/2018 Laser operating time Laser 1 "Beam on" time: 5,165 hrs Laser 2 "Beam on" time: 5,096 hrs Laser 3 "Beam on" time: 5,023 hrs Trumpf TruPrint 5000 including Powder Bed Monitoring and Melt Pool Monitoring options Filter system Accessories: 2x Build cylinders 3x Dosing cylinders 1x Overflow container (used) 1x Overflow container (NEW) Manuals 4x Heat exchangers (NEW) 2x Easy Filters (NEW) 3x NTRON SIL02 Oxygen Analyzer + Sensor (NEW) 1x Oxygen sensor (NEW) ...and much more, such as seals, etc. An Armanni CAR.Elev. pallet truck for changing containers is also in stock and can be offered as an optional extra. Get high-quality 3D components faster Dcedpfxozpvdzo Aa Hjl The TruPrint 5000—a high-productivity, semi-automated 3D printing system—prepares you for industrial serial production. With features such as optional 500°C preheating and a full-field multilaser configuration utilizing three 500-watt TRUMPF fiber lasers, you are ideally equipped for highly demanding industrial applications. The machine manufactures high-quality components from various metallic materials quickly and reliably, meeting the rigorous quality standards of tool and mold making—including via 3D printing onto preform blanks—as well as those of the aerospace and medical technology sectors. Optionally, the entire process chain—sieving, printing, cooling, and depowdering—can take place in a protective gas atmosphere. Combined with TRUMPF’s external part and powder management systems and monitoring solutions, it is ideally suited for industrial additive serial production. Thanks to the preform option, the TruPrint 5000 supports hybrid component production. In this process, the additive component structures are built directly onto a blank. This innovative option is particularly well-suited for easy handling in tool and mold making. TruPrint 5000 Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (Reduced if preheating >200 °C) Processable materials[1] Weldable metals in powder form, e.g., stainless steels, tool steels, aluminum, nickel-based, or titanium alloys Build rate[2] cm³/h 5 – 180 Layer thickness[3] μm 30 – 150 Max. laser power at workpiece (TRUMPF fiber laser) W 3 x 500 Beam diameter[3] μm 100 – 500 Min. measurable oxygen content ppm Up to

Condition: excellent (used), Year of construction: 2013, operating hours: 55,200 h, functionality: fully functional, machine/vehicle number: A0035A0294, Machine type: TruPunch 3000-1300 (S11) TruPunch 3000-1300 (S11), medium format 1250/2500 We are the first and only owner of the machine. Machine with complete history and service documentation. Machine is in fully working order and in continuous operation. Technical data: Width 6500 mm Depth 6203 mm Height 2252 mm Max. punching sequence (E = 1 mm) 1000 1/min Max. punching sequence – marking 2500 1/min Punching mode, X-axis 2500 mm Punching mode, Y-axis 1250 mm Max. sheet thickness 6.4 mm Max. workpiece weight 160 kg Max. punching force 180 kN Multitool tool change time 0.3 sec Number of tools/sheet clamps | 18 pcs / 2 pcs Max. part size, part flap when punching 500 mm x 500 mm Max. part size, rigid slide for punching (with sliding table) 80 mm x 50 mm Average power consumption with active automatic shutdown 0.3 kW Average power consumption during production 5.6 kW Additional, non-standard machine equipment: 1) Thread forming function with thread counter and thread forming tool damage control: chip-free thread forming is possible in both structural steel and stainless steel and aluminum. The threading tool is mounted like all other tools in the head. Thread size to be machined ranges from M 2.5 to M10. A thread sensor enables control of the threading tool damage. User-friendly operation, including lubricant level control. 2) Marking/surface embossing function: fast marking using appropriate tools. High-quality knurling can be performed at high speed. 3) Lowerable die: the lowerable die enables scratch-free processing because it moves downward when positioning the sheet metal. 4) Additional clamping device: recommended for processing very thin sheets and when using roller tool machining technology. An additional 2 clamping devices can be installed. In combination with the SheetMaster Compact, a third clamping device is recommended. 5) 3 x Option - vertically movable clamping device: the clamping devices move vertically (maximum stroke 12 mm); enables direct processing of the sheet metal at the clamping devices. This option reduces scratches from high forming dies. 6) Sensor in the slide for small parts: control of the slide for small parts (included in the "Nibbling-free machining" option). 7) Second locating pin: the pin is located on the outside on the right side. 8) RTC tool cassettes: 17 tool cassettes with die plates, enabling quick machine retooling. 9) Brush table with unloading and loading assistance: a brush table is recommended for processing particularly delicate materials. Vertically moving balls embedded in the table facilitate the loading and unloading process. We invite you to contact us. Dedpfx Aozd U D Nja Hscl

Condition: like new (used), functionality: fully functional, machine/vehicle number: S0711Q0147, Year of construction: 2019, total length: 1,445 mm, total height: 1,680 mm, total width: 730 mm, overall weight: 650 kg, input voltage: 230 V, laser power: 200 W, TRUMPF TruPrint 1000 – 3D metal printer in near-new condition A well-maintained TRUMPF TruPrint 1000 from 2019 is for sale. The machine is a compact and professional 3D metal printer based on laser metal fusion and is suitable for the production of complex metal parts, prototypes, and small series. The metal printer was purchased and installed at Herningsholm Vocational School and Gymnasium in the summer of 2019. It has only been used for educational purposes and has therefore only produced a very limited number of prints. The laser has only a few operating hours, and the machine is in near-new condition. The printer has been used for printing in stainless steel 316L. All prescribed service inspections have been carried out. The latest service was performed in January 2026, and the machine has not been used for printing since. The service report is attached to the advertisement and can also be sent upon request. Various consumables and spare parts are included. Machine data Manufacturer: TRUMPF Model: TruPrint 1000 Year of manufacture: 2019 Machine type: 3D metal printer Condition: Near new Build volume: Ø98.5 x 100 mm Material used so far: Stainless steel 316L Latest service: January 2026 Dcsdpfx Aaszrfire Hjl Location: Herningsholm Vocational School and Gymnasium, Herning - Denmark The machine can be inspected by appointment. The buyer is responsible for moving the machine.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Type: TruLaser 5030 fiber (L41) Laser power: 5000 watts Year of manufacture: 2012 Control system: Siemens Sinumerik 840 D Working area: 3000 x 1500 x 115 mm Operating hours: 66,934 h / 43,313 h Max. sheet thickness/steel: 25 mm Max. sheet thickness/stainless steel: 20 mm Max. sheet thickness/aluminum: 20 mm Max. speeds: 235 m/min Accuracy: 0.10 mm Length: 8300 mm Dcsdpfx Aajzmf R So Hel Width: 4800 mm Height: 2400 mm Weight: 12,000 kg Operating hours: approx. 67,000 hours

Condition: ready for operation (used), Year of construction: 2018, total height: 2,370 mm, overall weight: 5,650 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 200 mm, product length (max.): 2,587 mm, This 6-axis TRUMPF TruBend 3066 B26 press brake was manufactured in 2018. It features a press force of 660 kN, a bending length of 2600 mm, and a stroke of 200 mm. The machine includes a 4-axis backgauge (X/R/Z1/Z2) and operates with a rapid approach speed of 200 mm/s. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend 3066 B26 machine we have for sale. Contact us for more information. • Y-axis Stroke: 200 mm • X-axis Travel: 600 mm • R-axis Travel: 150 mm • Backgauge Axes: X / R / Z1 / Z2 (4 axes) • Press Force: 660 kN • Bending Length: 2600 mm • Usable Open Height: Minimum clearance 167 mm • Maximum Distance Table–Beam: 347–432 mm depending on tooling • Throat Depth: Approx. 400–420 mm • Beam Inclination / Parallelism: ±3 mm • Y-axis Rapid Approach Speed: 200 mm/s • Y-axis Working Speed: 15 mm/s • Y-axis Return Speed: Up to 200 mm/s • Positioning Accuracy (Y-axis): 0.01 mm • Mains Supply: 400 V / 50 Hz • Connected Load: 15 kVA Dimensions Dodpszx Smdefx Aa Hjcl Machine Depth 1644 mm

Condition: used, Year of construction: 2021, controller model: , _____ Description: Year of manuf. : 2021 TruBend Center 5030 :- Robust machine frame : - Angular direct drive :- Crowning system :- Machine control with touchscreen operation :- TecZone Fold programming – floating licence :- 2-axis part manipulator with suction modules :- 5-axis backgauge :- Optical angle assistant :- ToolMaster :- Hold-down tools :- OBW90 and UBW90 bending tools Technical specifications Minimum bending depth (standard tool):145 mm Minimum bending depth (with additional hold-down tool):40 mm Maximum bending length:3,123 mm Minimum bending length:80 mm Hold-down force:101 t Maximum box height:220 mm Minimum material thickness:0.4 mm Maximum steel material thickness:3 mm Maximum stainless steel material thickness:2.2 mm Maximum aluminium material thickness:4 mm Rapid traverse Y-axis (press beam):250 mm/s 5-axis backgauge:1,700 mm/s ToolMaster Bend:2,400 mm/s Dimensions and weight:6,500 x 3,150 x 2,995 mm / 26,000 kg Features :- ACB Laser :- DMC Bluetooth 2D barcode scanner :- Set of 3-surface suction modules (12 pieces) :- Support brackets (2 pieces) :- Additional hold-down tool function (ENW) Dsdpfxjzxkyvo Aa Hjcl :- Additional bending tool function (ZBW) :- ENW110-50 – Length 3,123 mm :- ZBW400 – Length 940 mm

Condition: used, Year of construction: 2021, controller manufacturer: Siemens, controller model: SINUMERIK 840D SL Steuerung, _____ Description: Year of manuf. : 2021 Power : 4 kW Standard equipment Working area:4000 × 2000 mm Control cabinets:Integrated Drive technology:Gantry combined with linear direct drives Waste removal:Longitudinal conveyor belt Positioning laser diode:Included Spray system:Included Automatic nozzle cleaning:Included Features :- NitroLine :- AdjustLine :- ControlLine :- FlyLine :- FocusLine :- FastLine :- PierceLine :- Brass cutting set :- Copper cutting set Laser TruDisk 4001 :- Power 4 kW :- BrightLine Fiber :- High-Speed Cutting Package :- Power Package for Fusion Cutting Additional machine functions :- Drop&Cut :- Integrated camera 1 for process monitoring Additional cutting packages :- High-speed Eco cutting package :- Pneumatic cutting Technical specifications Simultaneous operation:170 m/min Average positioning deviation (Ps):0.03 mm Positioning deviation (Pa):0.05 mm Minimum programmable step:0.001 mm X-axis:4000 mm Y-axis:2000 mm Z-axis:116 mm Maximum workpiece weight:2000 kg Structural steel:25 mm Stainless steel:20 mm Dcsdpfszxwdhox Aa Hsl Stainless steel (extended):35 mm Aluminium:20 mm Copper:8 mm Brass:8 mm Software:incl. software licence

Condition: used, functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0220A1818, laser power: 3,200 W, input voltage: 400 V, input current: 125 A, input frequency: 50 Hz, compressed air connection: 10 bar, overall weight: 11,700 kg, total length: 9,229 mm, total width: 6,145 mm, total height: 2,200 mm, Equipment: CE marking, documentation/manual, dust extraction, emergency stop, safety light barrier, We offer this used TRUMPF TruLaser 3030 laser cutting machine, manufactured in 2007. Laser power: 3200 W Djdozt I U Hepfx Aa Hocl Machine no.: A0220A1818 Year of manufacture: 2007 Power supply: 400 V / 50 Hz Connected load: 73 kVA Control voltage: 24 V Required fuse rating: 3 × 125 A Compressed air connection: 7–10 bar Nitrogen connection N₂: 30 bar Oxygen connection O₂: 20 bar If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, laser type: fiber laser, Used laser cutting system with 8 kW fiber laser and LiftMaster Compact (Stopa version) Manufacturer: TRUMPF Model: TruLaser 5040 fiber (L69) Year of manufacture: 2015 Operating hours approx.: 67,000 h, Laser on: 40,100 h TECHNICAL DATA: Maximum material thickness: Mild steel O2: 25 mm, Stainless steel N2: 40 mm, Aluminum N2: 25 mm, Copper O2: 10 mm, Copper N2: 5 mm, Brass N2: 10 mm Position deviation: 0.05 mm Max. position scatter Ps max: 0.03 mm Working area: 4,000 x 2,000 mm Laser power: 8,000 watts STANDARD EQUIPMENT Machine: Closed machine frame Torque drive combined with linear direct drives Enclosed beam guidance via fiber optic cable (LLK) Cooling unit Machine cooling unit (water-air) Integrated control cabinets with interior lighting Integrated storage cabinet Automatic longitudinal pallet changer 19" touch color screen Longitudinal conveyor belt TruDisk power supply via the machine Work area illumination Positioning laser diode Spray unit PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Copper cutting package (includes cutting data) Brass cutting package (includes cutting data) Transport and assembly device SPECIAL EQUIPMENT: Solid-state laser TruDisk 8001 with 1 fiber output Smart Nozzle Automation (includes nozzle changer, automatic nozzle condition monitoring, and smart skip) BrightLine fiber CoolLine (only with BrightLine fiber) DetectLine: precise sheet position detection (incl. automatic focus measurement) Wide transverse conveyor with tipping container (container to the right of the machine) Cleaning brush Integrated camera (Full HD) for process monitoring and single frame transmission to the network (view of the first 2.5 m) Additional 10 m extension of fiber optic cable between laser and machine Smart Collision Prevention (requires smart-collision-prevention plug-in for TruTops) Machine podium version (without steel structure) Storage interface for STOPA large-scale storage systems (SKL or UL) Safety devices for storage integration incl. 2nd light barrier circuit Storage interface (without storage cart) LiftMaster Compact (STOPA version) Dedpsy A I Tqofx Aa Hecl TRUMPF Laser: Solid-state laser TruDisk 8001 with one fiber output Fiber optic cable as per standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control (The TruDisk laser is subject to international export controls. According to EC Dual-Use Regulation 428/2009 (laser covered under 6A005)) Cutting head: Universal cutting unit with fully adaptive lens system Piercing head strategy Protective glass to prevent lens contamination Protective glass condition check ControlLine: height control and sheet outer edge detection Control system: SINUMERIK 840D SL control Simple workshop programming TruTops Laser via network access Quick re-production Integrated TRUMPF technology data Automatic shut-off Programmable cutting gas/pressure selection ContourLine FastLine FlyLine Microweld AdjustLine Teleservice via Internet Data transfer: USB interface RJ-45 network connection Safety: CE marking Light barriers Multi-chamber exhaust system Compact extraction unit Machine enclosure, certified viewing window, door on right Electric roll-up roof This used machine can be inspected under production conditions. All details without guarantee – sale is without any form of warranty or guarantee. Subject to prior sale.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Available starting September/October. Dcsdpfx Aozn N Hgea Hsl Operating hours: Laser: 35,000 hours.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 715 h, controller manufacturer: SIEMENS, laser power: 3,000 W, punching force: 18 t, sheet thickness (max.): 6 mm, overall weight: 18,500 kg, total width: 9,945 mm, total height: 2,500 mm, product length (max.): 8,862 mm, number of axes: 3, This 3-axis TRUMPF TruMatic 6000-1600 fiber was manufactured in 2022. It features a maximum laser power of 3,000 W and a punching force of 180 kN, with a maximum punching frequency of 917 strokes/min. The machine has a large working area, allowing for combined punching and laser processing. If you are looking to get high-quality punching and laser cutting capabilities, consider the TRUMPF TruMatic 6000-1600 fiber machine we have for sale. Contact us for further details. • Laser source: TruDisk 3001 solid-state laser, 3,000 W, fiber-optic beam delivery (10 m), compact cutting head, anti-collision, protective glass, closed beam guidance, programmable cutting gas pressure • Control/OS/Interface: Rexroth IndraMotion MTX CMP70; Windows Embedded; 17-inch touchscreen; 4 GB program memory; 320 GB HDD; USB; RJ45 10/100 Mbit/s; Internet teleservice; integrated technology database; NC program management; production planning; automatic machine shutdown; network connection for programming/production systems • Working area: • Punching (no reposition): 3,050 x 1,550 mm • Laser cutting (no reposition): 3,050 x 1,550 mm • Combined (no reposition): 2,500 x 1,550 mm • Combined (with reposition): 3,050 x 1,550 mm • Max sheet thickness: 6.4 mm; Max workpiece weight: 230 kg • Max part size via flaps: 500 x 500 mm (laser) / 500 x 500 mm (punching); via chute: 80 x 50 mm • Axes/performance: Dedpezul Dzefx Aa Hecl • Drives: Maintenance-free AC servo motors (X/Y/C); electrohydraulic punching head • Max speeds: X 90 m/min; Y 90 m/min; simultaneous 108 m/min; C-axis 330 rpm (punching/thread forming) • Frequencies: Max punching at E=1 mm: 917 strokes/min; marking: 2,800 strokes/min • Accuracy: Pa ±0.1 mm; Ps ±0.03 mm; min increment 0.001 mm • Punching unit: • Force: 180 kN; electrohydraulic head; rotary single-station tool holder • Tool circumferences: punching 76.2 mm; forming 101.6 mm; optional 110 mm • Change times: basic 3.2 s; MultiTool 0.3 s • Magazine: 25 linear positions; standard 22 tools; up to 220 with MultiTool • Clamps: 3 hydraulic; fully rotatable tools; programmable blank-holder; tool length compensation; punch lubrication; chip extraction with automatic tube emptying and fill-level estimation; stroke counter; tool lubricant level monitoring; WhisperTools compatible • Forming/punching functions: • MultiTool; MultiBend; thread forming (M2.5–M10); surface marking/embossing; vertically movable clamps • Max MultiBend: width 55 mm; height incl. material 25 mm; angle up to 90° • Automatic thread-forming lubrication; thread counter • Laser cutting capability (max thickness): • Mild/structural steel: up to 6 mm (O2 or N2) • Stainless steel: up to 6 mm (N2) • Aluminum: up to 5 mm (N2) • Laser functions: NitroLine; FocusLine; FastLine; FlyLine; ControlLine; slug detection; ejector cylinder for laser-cut parts; laser event log; automatic cutting-head height adjustment • Standard machine equipment and safety: • Rigid C-shaped welded frame; coordinate guide system; linear tool magazine • 3 hydraulic clamps; programmable repositioning; foot switch for clamp closing • Radiation protection at cutting head; two 500 x 500 mm part flaps with sensors • Ball tables; two finished-part containers; chip container • Compact dust extraction and filtration unit • Water-air cooling unit (machine and laser) • Initial hydraulic oil filling • Two-level safety light curtains; fast drive shutdown; protection against scattered laser radiation

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: B0501A0285, functionality: fully functional, operating hours: 6,560 h, input voltage: 380 V, input current: 10 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 50 t, stroke length: 215 mm, operating speed: 220 mm/s, reverse speed: 220 mm/s, table width: 100 mm, table length: 1,275 mm, table height: 950 mm, throat depth: 420 mm, clearance between the columns: 1,040 mm, total length: 2,190 mm, total width: 1,740 mm, total height: 2,375 mm, overall weight: 4,900 kg, Equipment: CE marking, documentation/manual, safety light barrier, I am offering my well-maintained TruBend 5050 for sale. It has no defects, no quirks, and no hidden costs. You are welcome to inspect and test it at any time. I can also take care of the loading. The setup is also not complicated. The buyer is responsible for arranging the shipping. This machine is being offered for sale solely for tax-related reasons. We do not need to and, above all, do not want to sell it below its market value, as it is very reliable and we have grown attached to it. Anyone who is genuinely interested is welcome to contact me. And yes, these are the original operating hours. Nothing has been replaced, falsified, or anything of that nature. The machine has been used very little by both the previous owner and us. The last maintenance was some time ago, but everything else is in absolutely original condition. From the operating manual to the last screw. Dodpjzlutaefx Aa Hscl

Condition: ready for operation (used), Year of construction: 2018, operating hours: 2,874 h, punching force: 17 t, sheet thickness (max.): 6 mm, number of axes: 3, This 3-axis TRUMPF Trupunch1000 S05 was manufactured in 2018. It features a working area of 2500 x 1250 mm and is equipped with maintenance-free three-phase motors. The machine includes a linear magazine with 20 stations for clamps and tools, and an electro-hydraulic punching head with programmable features. If you are looking to get high-quality punching capabilities, consider the TRUMPF Trupunch1000 S05 CNC punching machine we have for sale. Contact us for further details. - Working Area: 2500 x 1250 mm (Medium Format)- Drives: Maintenance-free three-phase motors- Frame: C-frame- Tool Storage: Linear magazine with 20 stations for clamps and tools- Clamps: 2 hydraulic sheet clamps- Punching Head: Electro-hydraulic punching head, rotating mono-tool adapter, programmable stripper position, tool length compensation, slug extraction- Functions: Forming, MultiTool, MultiBend, Thread forming with tap breakage control, Signing / fast beading- Control: TRUMPF control based on Rexroth IndraMotion MTX- Interface: USB interface, RJ45 network connection, Wireless Operation Point (VOS basis)- Table Type: Ball table with brush inserts- Safety: CE marking, multi-beam light barriers, rapid drive shutdown- Frequency: 50 Hz- Voltage: 400 V- Included Accessories: 18 original Trumpf tool cassettes (including 10 RTC-cassettes 2017 with die plates from original order), extensive selection of punching tools, and a Trumpf "quicksharp" punch grinding machine (YOM 89) Djdpfx Aezc R Enoa Hjcl

Condition: ready for operation (used), Year of construction: 2013, operating hours: 55,200 h, punching force: 18 t, total height: 2,252 mm, total width: 6,203 mm, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, controller manufacturer: BOSCH, controller model: MTX CMP70, product length (max.): 6,500 mm, number of axes: 3, This TRUMPF TruPunch 3000 CNC punching machine was manufactured in 2013. It features a working area of 2500 mm x 1250 mm and a maximum punching force of 180 kN. The machine is equipped with 18 tool stations and offers a maximum punching rate of 1000 strokes/min. If you are looking to get high-quality punching capabilities, consider the TRUMPF TruPunch 3000 machine we have for sale. Contact us for further details. • Maximum punching rate: 1000 strokes/min • Maximum marking rate: 2500 strokes/min • MultiTool change time: 0.3 sec • Tool stations: 18 • Sheet clamps: machine equipped with 3 vertically movable clamps • Maximum part size via part flap: 500 x 500 mm • Maximum part size via fixed chute: 80 x 50 mm • Control: BOSCH MTX CMP70 with 17-inch touchscreen • Tool holder: Rotating single-tool holder • Thread forming: M2.5 to M10, with thread counter and tool breakage monitoring • Marking/embossing function • Retractable die • Programmable stripper • Automatic tool length compensation • Punch stroke counter • Automatic punch lubrication • Vacuum slug removal • Forming function • Brush table with loading/unloading support • Automatic repositioning with programmable clamps • Average power consumption (production): 5.6 kW • Average power consumption (automatic shutdown mode): 0.3 kW • CE marked • Full service history available • Machine under power and in operation; test possible Additional equipment Dodpfx Aozy Rlhea Hocl • Independent part conveyor - not included in the sale • Tooling (e.g., RTC tool cassettes, punches/dies) - not included in the sale

Condition: excellent (used), Year of construction: 2017, Working width: 3 meters Pressing force: 130 tons Dcsdpezq A Ipjfx Aa Hjl