Used Blowing Molding for sale (2,969)

Condition: excellent (used), SCM contura in excellent condition Redpfjt E T I Nox Akioch

Year of construction: 1988, condition: good (used), Carlo Salvi 1 die 2 blow Model 780/SV Redpjhrdmxsfx Akijch Maximum Cutoff dia.mm: 6,35 Max. Cutoff length mm: 97 Max. K.O. length (die side) mm: 80 Max. Speed, pcs, per minute: 360

Condition: excellent (used), Year of construction: 1991, Engel ES 200/50 HL Clamping force: 50 tons Redpfxjld Nt So Akiech Year of manufacture: 1991 Screw diameter: 30 mm CE marking: 1988

Condition: excellent (used), Year of construction: 2004, Engel Victory 80/45 Tech Closing force: 45 tons, without core Screw diameter: 22 mm Year of manufacture: 2004 Control unit: 200 Rcedpfx Akjh Rawbjieh

Condition: excellent (used), Year of construction: 2021, operating hours: 6,300 h, functionality: fully functional, machine/vehicle number: ADFL9004, clamping force: 80,000 kN, screw diameter: 98 mm, clearance between the columns: 1,020 mm, column diameter: 160 mm, displacement volume: 3,142 cm³, injection pressure: 1,794 bar, injection weight: 2,890 g, mold height (min.): 400 mm, ejector force: 182,000 N, ejector stroke: 280 mm, opening stroke: 1,000 mm, plate length: 2,020 mm, plate width: 1,440 mm, plate height: 1,440 mm, total length: 11,200 mm, total width: 2,400 mm, total height: 3,300 mm, overall weight: 35,000 kg, heating capacity: 39 kW (53.03 HP), pressure: 178 bar, number of injections: 1, pump power: 116,000 W, power: 163 kW (221.62 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 312 A, Equipment: documentation/manual, The machine has few operating hours and is in very good condition. It has been well maintained. The machine processes only ABS, PP, and PS. The machine is controlled by a Beckhoff system. The machine is equipped with a variety of additional features, including 3 air valves, two hydraulic valves, a servo valve for hydraulic table movement, 8 tool heating zones, a water manifold with 8 zones, a screw heater insulation, hydraulic screw rotation for torpedo replacement, a torpedo with a locking system, an interchangeable centering ring, a Euro-map for the robot, a door with automatic opening via an electric motor, and an electrical cabinet with sockets. Water blocks are also included for both the moving and stationary tables, each with 8 connections. In addition, a number of spare parts are included, such as a complete torpedo, a screw, heaters, temperature sensors, and specific seals for the hydraulics, as well as a self-filtration filter, a torpedo wrench, and auxiliary ejector rods. The machine is sold without the robot shown in the pictures. Rcedpfx Aoznlhmskieh

Condition: excellent (used), GWK TECO CS 90 E mold temperature controller, water, 95ºC, heating power 6 kW, cooling power 23 kW Features: Redpeznl Dujfx Akioch - Display of functions and errors. - Access to device control at various password-protected levels. - Comparator (monitoring of momentary value parameter tolerance values ​​with alarm signaling). - Electronic medium level control with dry-run protection. - Automatic filling and refilling with medium level monitoring. - Additional option for manual filling with treated water. - Automatic air venting. - Leaky mold management function. - Mold emptying. Control / Security: - Temperature sensor in the power supply circuit. - Overheating protection. - Contactless heating control with solid-state relays. - Safe temperature reduction upon shutdown. - Acoustic alarm signal (horn). - Symmetrical network load with three-phase drive and three-phase heaters. - 3-fold safety heating exclusion

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, clamping force: 500 kN, mold height (min.): 225 mm, ejector force: 300 N, overall weight: 2,450 kg, input voltage: 380 V, Equipment: documentation/manual, ARBURG 320 S in excellent condition, low operating hours, and with a Piovan dryer. Year of manufacture: 1998. Piovan dryer, model TDM604. Year of manufacture: 2005. Rcedpfx Aozxg Amekieh Includes documentation. The machine is powered on for inspection.

Condition: like new (used), Year of construction: 2019, operating hours: 400 h, clamping force: 1,000 kN, screw diameter: 32 mm, displacement volume: 103 cm³, injection pressure: 2,200 bar, mold height (min.): 150 mm, ejector force: 25,000 N, ejector stroke: 100 mm, opening stroke: 350 mm, number of injections: 1, Equipment: documentation/manual, FANUC ROBOSHOT Alpha S100iA – like-new, fully electric precision injection molding machine, manufactured in 2019, with only 400 operating hours. Your advantages: • 1,000 kN clamping force • FANUC 31i-B CNC control with a 15-inch touchscreen • 32 mm screw and 103 cm³ injection volume • Injection speed up to 200 mm/s, maximum 2,200 bar • Hardened W/C plasticizing unit – for temperatures up to 350 °C and up to 30 % glass fiber • Euromap 67 robot interface Tool space and clamping unit: • Plate dimensions 660 × 610 mm • Tie bar spacing 460 × 410 mm • Mold height 150–620 mm, extended version • Opening stroke 350 mm • Ejector stroke 100 mm, ejector force 25 kN Redozrikmopfx Akisch Equipment includes, among other things: AI pressure and dosing control, tool and ejector protection, backflow monitoring, automatic tool height adjustment, energy consumption measurement, four-circuit flow meter, hopper slide, three-color LED signal light, three air valves, and cascade control for up to eight needle gate valves. Hungarian operating manual and warning instructions are available. A robot is not included in the scope of supply. Inspection by appointment. Further technical documents and the offer are available upon request.

Condition: good (used), Year of construction: 1998, Krauss Maffei KM 800-8000 MC injection molding machine Year of manufacture: 1998 Serial number: 8D980U9 Control system: Krauss Maffei MC3F Clamping force: 8000 kN (800 t) Screw diameter: 130 mm L/D ratio: 22:1 Injection volume: 6570 cm³ Injection weight (PS): 5617 g Injection pressure: 1296 bar Maximum cylinder temperature: 375°C Distance between columns (H x V): 1120 x 1000 mm Dimensions of mounting plates: 1600 x 1530 mm Opening stroke: 2000 mm Minimum mold height: 600 mm Maximum daylight opening: 2000 mm Ejector stroke: 250 mm Ejector force: 226 / 95 kN (front / rear) Screw speed: 92 rpm Injection rate: 929 cm³/s Pump motor power: 132 kW Heater power: 70 kW Number of heating zones: 7 Dry cycle (EUROMAP): 700 cycles/h Oil tank capacity: 3600 l Supply voltage: 400 V / 50 Hz Machine length: approx. 10,500 mm Rsdpfx Akjzrwy Asioch Machine width: approx. 2650 mm Machine height: approx. 2400 mm

Condition: excellent (used), Year of construction: 2005, ENGEL VICTORY 2050/300 POWER injection molding machine Year of manufacture: 2005 Serial number: 155108 Control system: ENGEL CC200 Operating hours: approx. 88,000 h Design: columnless – Tie-Bar-Less Drive: hydraulic Clamping unit Clamping force: 3000 kN / 300 t Clamping system: ENGEL POWER – hydraulic, columnless Opening stroke: 900 mm Minimum mold height: 350 mm Maximum daylight opening: 1250 mm Dimensions of mounting plates: 1100 × 1000 mm Injection unit Injection unit: 2050 Screw diameter: 70 mm Injection volume: 1155 cm³ Injection weight for PS: approx. 1050 g Maximum injection pressure: approx. 1700 bar Screw L/D ratio: approx. 20:1 Control and equipment Control system: ENGEL CC200 Interface / robot preparation: yes Robot: none Hydraulic core control: 2 circuits Central lubrication system: yes Hydraulic oil cooling: yes Power supply Voltage: 400 V Frequency: 50 Hz Dimensions and weight Rcodpfx Akjzvdbusijh Machine length: approx. 7300 mm Machine width: approx. 2200 mm Machine height: approx. 2500 mm Machine weight: approx. 20,400 kg

Condition: good (used), Year of construction: 1992, Clamping force: 500 kN Screw diameter: 30 mm Rodpfxovygh Nj Akijch Weight: 3,200 kg Available immediately from stock

Condition: excellent (used), Year of construction: 1998, Arburg 420C-1300-350 (186) with conveyor belt, bimetallic screw General information Product Code: 186 Availability: In Stock Year of production: 1998 Brand: Arburg Technical data Shot Weight: 210 g Clamping Force: 1,300 kN Screw dia: 45 mm Rcsdpjvnmc Ajfx Akish Injection pressure: 1670 bar Tie bar distance: 420 x 420 mm Platen size: 605 x 605 mm Mould height min.: 250 mm Type of controls: Selogica Language: German Power: 32,2 kW Workinghours: 88000 h Weight: 4080 kg Dimensions: 4,5 x 2 m Hopper: No Core pull: Yes Euromap: Yes

Condition: excellent (used), Year of construction: 2007, Mold Masters Hotrunner external 3 zones Hotrunner TMXL-3/3-0 We have available 7 units Rcjdpfxovax Izs Akijh

Condition: excellent (used), Year of construction: 2006, operating hours: 15,070 h, clamping force: 900 kN, screw diameter: 42 mm, injection pressure: 1,724 bar, injection weight: 193 g, BOY 90A (102) without hopper General information Product Code: 102 Availability: In Stock Year of production: 2006 Brand: Boy Technical data Shot Weight: 193 g Clamping Force: 900 kN Screw dia: 42 mm Injection pressure: 1724 bar Tie bar distance: 430x360 mm Platen size: 635x610 mm Mould height min.: 250 mm Type of controls: Procan CT Language: German Power: 26,3 kW Workinghours: 15070 h Rjdpfx Akovuqnceiech Weight: 3100 kg Dimensions: 4,9x1,2x2,1 m Hopper: No

Condition: used, Year of construction: 1999, Technical details: screw size: 45 mm Rcedpfx Ajwvkgmokijh injection shot weight in Polysterol: 149 g/PS closing pressure: 1250 kN

Condition: used, Year of construction: 2006, Semi-automatic PET bottle machine – ZENTRONIK ZR-7 1. Heating oven for PET preform heating 2. Semi-automatic PET bottle production machine Mould: double-cavity for 5.0L bottles (48 mm cap) Output: approx. 800 bottles/hour Rcjdswnzdaopfx Akish Technical condition: used, operational

Condition: ready for operation (used), functionality: fully functional, clamping force: 800 kN, clearance between the columns: 1,200 mm, ARBURG 1200 T 800-150 MACHINE DETAILS Operating Hours Machine Cycles: 2,426,431 Pump Operating Hours: 38,226 h Automatic Operation Hours: 30,517 h FTP ATR-25 Q MACHINE DETAILS Rodex Af S Uepfx Akiech Weight: 1,400 kg Note: Further information regarding the machine configuration can be found in the attached document.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 70 mm, injection pressure: 2,389 bar, ejector stroke: 135 mm, opening stroke: 1,825 mm, TECHNICAL DETAILS Clamping Unit Clamping force: 6,500 kN Maximum mold opening force: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Mounting platen (H x V): 1,520 x 1,470 mm Clear distance (H x V): 1,000 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 675 mm Daylight: 1,825 mm Ejector stroke: 135 mm Ejector force forward/backward: 226 kN Injection Unit Screw diameter: 70 mm L/D ratio: 23 Injection pressure: 2,389 bar Shot volume: 1,097 cm³ Shot weight (PS): 998 g Injection flow rate: 393 cm³/s Screw speed: 218 rpm Plasticizing rate: 83 g/s Nozzle contact force: 173 kN MACHINE DETAILS Dimensions & Weight Required floor space approx.: 8.70 x 2.90 x 2.80 m Total weight: 44,000 kg Electrohydraulic Equipment Rated power pump motor: 75 kW Installed heating capacity: 36 kW Temperature control zones cylinder heating: 7 EQUIPMENT Oscillating elements 1 x air valve 8-fold pneumatic cascade control Rcedpfeycqc Tjx Akish Accumulators 2 x hydraulic core pulls at BWAP 2 x hydraulic core pulls at FWAP Robot interface according to EUROMAP 67

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, clamping force: 9,500 kN, screw diameter: 120 mm, ejector stroke: 300 mm, opening stroke: 1,900 mm, TECHNICAL DETAILS Clamping force: 9,500 kN Opening force: 665 kN Rcjdpfx Akjxup Sisieh Tie bar distance: 1,400 x 1,150 mm Clamping plates: 1,960 x 1,710 mm Opening stroke: 1,900 mm Min. mould height: 500 mm Max. mould height: 1,200 mm Max. opening width: 2,400 mm Ejector stroke: 300 mm High-performance screw HPS-UN, diameter: 120 mm Nozzle radius: 30 mm Nozzle opening: 12 mm Screw diameter: 120 mm Shot weight (HDPE): 5,420 g Shot volume: 7,634 cm³ Specific injection pressure: 2,257 bar MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 12,770 x 3,420 x 2,750 mm Machine weight: 61.5 t

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 15,000 kN, screw diameter: 145 mm, injection pressure: 1,454 bar, opening stroke: 2,900 mm, tool height: 1,400 mm, TECHNICAL DETAILS Clamping force: 15,000 kN Platen dimensions (H x V): 2,150 x 1,880 mm Tie bar spacing (H x V): 1,500 x 1,250 mm Min. mold height: 700 mm Max. mold height: 1,400 mm Max. opening stroke: 2,900 mm Rcsdpfx Akoxup T Hoish Screw diameter: 145 mm Shot volume: 10,981 cm³ Shot weight (PS): 9,880 g Injection pressure: 1,454 bar MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 14,400 x 3,400 x 2,900 mm Net weight (incl. control cabinet): 74,000 + 21,000 kg Electrical & hydraulic equipment Rated power of pump motor: 165 kW Heating capacity: 97 kW EQUIPMENT Wittmann W 753 robot (year of manufacture: 2008) Safety enclosure Conveyor belt Service history notes: 2010: New screw with RSP and barrel 2015: New IBED 2015: New wiring panel 2017: New motor and 2nd pump 2017: New injection side cylinder piston BS with seals 2017: Replacement of oil cooler circulation pump 2017: Replacement of teach box (robot) 2018: Replacement of pumps P1 + P3 (at 65,800 operating hours) 2018: Replacement of hydraulic oil

Condition: ready for operation (used), Year of construction: 2004, operating hours: 70,029 h, functionality: fully functional, machine/vehicle number: 51561, clamping force: 2,300 kN, screw diameter: 135 mm, injection pressure: 1,600 bar, opening stroke: 3,800 mm, tool height: 1,890 mm, TECHNICAL DETAILS Clamping force: 2,300 kN Platen size (H x V): 2,900 x 2,500 mm Tie bar distance (H x V): 2,000 x 1,600 mm Minimum/maximum mould height: 700 mm/1,890 mm Maximum opening stroke: 3,800 mm INJECTION UNIT Screw diameter: 135 mm Shot volume: 8,870 cm³ Shot weight (PS): 8,071 g Injection pressure: 1,600 bar MACHINE DETAILS Rcodpfx Asxuqc Nokioh Net weight (with control cabinet): 113 t + 18 t Operating hours: 70,029 h

Condition: good (used), Year of construction: 2004, functionality: fully functional, clamping force: 4,000 kN, screw diameter: 80 mm, injection pressure: 2,500 bar, For sale: Injection moulding machine Arburg 820S 4000-2100, serial no. 195746. The item is in good condition. Technical specifications: Year of manufacture: 2004 Injection unit: 2100 Screw diameter: 80 mm Shot volume: 1407 cm³ Clamping force: 4000 kN Tie bar spacing: 820×820 mm Platen size: 1171×1171 mm Maximum mould height: 850 mm Maximum opening stroke: 700 mm Maximum distance between platens: 1550 mm Ejector force: 100 kN Ejector stroke: 250 mm Maximum weight of moving mould half: 4500 kg Hydraulic pump drive power: approx. 55 kW Total installed power: approx. 88.9–96.2 kW Number of heating zones: 6 + nozzles Net weight of machine: 22,700 kg Dimensions (L × W × H): approx. 8.0 × 2.3 m Control system: SELOGICA Machine cycles: 4,157,591 Pump hours: 69,800 Auto mode: 58,556 Transport and loading can be organised Europe-wide on request, at an additional cost. Prices excl. VAT Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machine purchase & sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your manufacturing business? Or do you want to sell yours? Rcodpfxjxxi Nvo Akieh For further information or contact options, please visit our website.

Condition: used, screw diameter: 35 mm, For sale: SJ35 Single Screw Plastic Extruder manufactured by Zhang Jia Gang Friend Machinery Co., Ltd. A compact and reliable extrusion unit suitable for small- to medium-scale production—ideal for laboratory testing or extrusion of plastic tubes, profiles, or filaments. The machine is fully functional, well maintained, and available for immediate inspection. Technical Specifications Model: SJ35 Manufacturer: Zhang Jia Gang Friend Machinery Co., Ltd. (China) Screw diameter: Ø35 mm L/D ratio: 35:28 Main motor power: 7.5 kW Center height: 1000 mm Gearbox: ZLYJ112 (ratio 16:1, 2017) Heating zones: multiple, each independently controlled Drive: ABB inverter control Hopper dryer and feeder included Electrical supply: 400 V / 3 phase / 50 Hz Condition: fully operational and tested Condition Very good technical and visual condition Equipped with digital temperature controllers and main motor speed control Comes with complete electrical cabinet with ABB inverter and wiring Regularly maintained, all components present Available for inspection and testing in Ivanka pri Nitre, Slovakia Rjdpfjxuczqox Akijch Price €5,000 (negotiable) Ex-works Ivanka pri Nitre, Slovakia Ideal for: - Plastic extrusion of small profiles, tubes, and filaments - Laboratory testing and material development - Educational or pilot-scale production facilities

Condition: ready for operation (used), Year of construction: 2006, operating hours: 98,495 h, functionality: fully functional, clamping force: 500 kN, screw diameter: 25 mm, clearance between the columns: 370 mm, displacement volume: 74 cm³, injection pressure: 2,500 bar, injection weight: 59 g, mold height (min.): 200 mm, ejector force: 22,600 N, ejector stroke: 100 mm, opening stroke: 600 mm, total length: 3,500 mm, total width: 1,400 mm, total height: 1,910 mm, overall weight: 3,000 kg, heating capacity: 8.12 kW (11.04 HP), pump power: 11,000 W, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, We offer this used KraussMaffei 50-180 CX injection moulding machine, year 2006. KM Model: 50-180 CX International KM size designation: 180 CX/50 Year of manufacture: 2006 Machine serial number: 61009011 Machine weight: 3,000 kg Condition: ready for operation (used) Pump operating hours: 98,495 Automatic cycle hours: 83,046 Description: Screw diameter: 25 mm Clamping force: 500 kN Shot volume: 74 cm³ Maximum injection pressure: 2,500 bar Shot weight: 59 g Minimum mould height: 200 mm Maximum opening stroke: 600 mm Maximum daylight between platens: 600 mm Tie bar spacing: 370 mm Location ring, injection side: Ø125 mm Location ring, ejector side: Ø125 mm Ejector force (forward/backward): 22.6 kN / 9.9 kN Ejector stroke: 100 mm Rcedpoyf E Dqefx Akieh Machine dimensions (LxWxH): 3,500 x 1,400 x 1,910 mm Machine weight: 3,000 kg Heating capacity: 8.12 kW Pump motor power: 11 kW Power supply: 400V, 50Hz, standard industrial three-phase connection Equipment: documentation included If you have any additional questions or need more information, please send us a message or call us.

Condition: used, Year of construction: 2021, operating hours: 5,048 h, functionality: fully functional, machine/vehicle number: 245467, ENGEL DUO 17060/2000 injection moulding machine with ENGEL Viper 60 robot (robot working area, conveyor belt) – year 2021 For sale: ENGEL DUO 17060/2000 injection moulding machine, year of manufacture 2021, in excellent technical condition. The machine has been regularly serviced and operated in stable production conditions. Technical data and information: - Manufacturer: ENGEL - Model: DUO 17060/2000 - Clamping force: 2000T Rjdpfxeycc N Se Akijch - Year of manufacture: 2021 - Operating hours: 5048 h - Type: two-platen injection moulding machine - Condition: very good, fully functional Additional equipment: - ENGEL Viper 60 robot – perfectly matched to the machine, ready for direct integration into a production line, robot working area, conveyor belt. Offer advantages: - Low number of operating hours - Modern, energy-efficient design - High process repeatability and precision - Complete package: injection moulding machine + robot, robot working area, conveyor belt Ready for immediate commissioning