Used Blowing Molding for sale (2,843)

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 7814-0045, total length: 4,000 mm, total width: 1,500 mm, total height: 2,000 mm, Weight approximately 3000 kg For sale is a used machine from a site closure. Dwodpfxjzqam As Aaxsb Sale is made excluding any warranty for defects. The machine has not been inspected but was operational until the very end.

Condition: good (used), Year of construction: 2000, 1x used Arburg 570C 2000-350 Year of manufacture: 2000 Screw: 45mm Core pulls: 1x Hot runner system: 6x Without conveyor belt Dwsdpozx D Hpsfx Aaxjb

Condition: excellent (used), Complete material drying and feeding system by Motan — ready to connect to injection or blow molding machines. The system includes three integrated components: 1. Material vacuum loader (Motan METRO series) Automatic pellet conveying from bag/bulk bag to hopper Electric motor with vacuum turbine Dust filter and discharge valve 2. Stainless steel drying hopper Conical, insulated stainless steel construction Internal heating element and temperature sensor Estimated capacity: [80 / 120 / 200] liters — to be confirmed 3. Motan LUXOR desiccant dehumidifier (orange cabinet) Dedpfjzhcrvex Aaxewb Twin-tower molecular sieve dehumidification Automatic regeneration cycle Process air temperature: up to 180°C (depending on material) Dew point: −40°C (typical for Motan LUXOR series) Integrated PLC control 380V three-phase Suitable for PMMA, SAN, PC, ABS, PET, PA (nylon), PE, PP, PS and all hygroscopic engineering plastics. Essential for cosmetic, optical, and technical injection molding. Application Pre-drying and feeding of plastic granules to injection molding machines, blow molding machines, and extruders. The system removes moisture from pellets to prevent surface defects (bubbles, streaks, hydrolysis) in finished parts. Technical specifications Brand: Motan (Motan-Colortronic) Model: LUXOR [80 / 120 / 200] — to confirm with rating plate Year: [approx. late 1990s / early 2000s] Voltage: 380V three-phase Origin: Germany Configuration: Complete dryer + hopper + loader

Condition: not inspected (used), Year of construction: 2002, functionality: unexamined, machine/vehicle number: 45719, total length: 9,000 mm, total width: 2,300 mm, total height: 2,500 mm, overall weight: 33,500 kg, Handling including linear robot. Automation is not included but can be purchased separately upon request. Automation is integrated; programming work may be required. For sale is a used machine from a site closure. Sale is made excluding any warranty for defects. Dwedpfx Aaezrd Ugjxob The machine has not been tested but was operational until the end.

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: M08U/9110, Offer Number: M08U/9110 Machinetype: 2 die - 3 blow transfer header Make: NAKASHIMADA Type: NP80 Constr. year: 1992 diameter range: 10 mm number of dies: 2 number of stations (incl. cut off): 4 Dwjdozzw Sdjpfx Aaxsb cutting length: 100 mm shaft length under head: 80 mm output - pieces/min: 150 press power: 60 t Location: Outside of Europe

Condition: not inspected (used), Year of construction: 2012, functionality: unexamined, machine/vehicle number: 17659, total length: 11,000 mm, total width: 3,000 mm, total height: 2,600 mm, overall weight: 40,000 kg, Includes handling equipment, peripherals, and conveyor belt. A used machine is being sold as part of a site closure. Sale is made excluding any warranty for defects. Dwjdpfxszrd Slo Aaxob The machine has not been inspected but was in working order until the end.

Condition: excellent (used), Year of construction: 2021, Chen Hsong JetMaster 88-MK6 with Sepro Industrial Robot Succes 7 / Hybrid Machine Year of manufacture: 2021 Injection unit: Screw diameter: 41 mm Shot weight: 246 g Injection pressure: 1890 bar Dosing volume: 271 ccm Clamping unit: Clamping force: 128 t Tie bar spacing: 410x410 mm Platen size: 620x605 mm Ejector: electric Clamping unit: toggle Control: BECKHOFF - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor with inverter drive - energy saving Central lubrication Automatic tool height adjustment Rexroth hydraulics The machine was serviced in Germany Robot Samfacc Year of manufacture: 2022 4-axis robot: 3 axes are driven with servo motors (electric): X, Y (telescopic), Z; Axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt, and protective housing Purchase of the robot and conveyor belt for an additional charge Djdpfszy Iaiex Aaxjwb Dimensions: Weight: 4000 kg Length/Width/Height: 4.90x1.30x1.80 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2021, Chen Hsong JetMaster 128-MK6 with Samfacc robot / hybrid machine Year of manufacture: 2021 Injection unit: Screw diameter: 41 mm Shot weight: 246 g Injection pressure: 1890 bar Dosing volume: 271 cc Clamping unit: Clamping force: 128 t Tie bar spacing: 410x410 mm Platen size: 620x605 mm Ejector: electric Clamping unit: toggle Control: BECKHOFF - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Dwsdpfxszy Izao Aaxob Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control system with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by an inverter - energy saving Central lubrication Automatic tool height adjustment Rexroth hydraulics The machine was serviced in Germany Samfacc robot Year of manufacture: 2022 4-axis robot: 3 axes are driven by servo motors (electric): X, Y (telescopic), Z; Axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 4000 kg Length/Width/Height: 4.90x1.30x1.80 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: used, Year of construction: 2004, Overview This complete filling line for non-returnable PET bottles was manufactured 2004 by the german manufacturer KRONES. The line was running as a non returnable bottle filling line. The line is designed for high-capacity beverage production, handling up to 12,000 b/h and is in a good condition.    Technical Data Dwsdpfx Asyb Sa Doaxob - Capacity: 12,000 bph (at 1,5L); 14,000 bph (at 0,5L)  - Filling product: carbonated water and soft drinks with 15°C and 8,0 g/l CO2 - Bottle Formats: 0,5L and 1,5L PET CSD - Cap Formats: PCO 1810 - Contiroll labelling station 2-3-340 for wrap-around label from a reel with hotmelt and 2 x cold glue labelling station 8-8-130 for paper label - Packaging formats: shrink wrapping with/without carry handle (3x2) - Pallet: 4 x ¼ Plastic pallet (600 x 400 mm); 2 x Half-size pallet (800 x 600 mm) on Euro pallet (1.200 x 800 mm)  - Application: CSD - Hygienic design - condition: good technical condition, dismantled - blow molding, filling and capping machine as a block system   Scope of Delivery Blow Molding Machine | KRONES | Contiform S08 | 2004 Compressor | Kaeser | only Booster grade | 2004 Filling/Capping | Krones| Mecafill VKP-PET 2880-80-113 | 10 capping heads | 2004 Mixer | KRONES MSF 24/2 | vacuum-assisted deaeration | Brixmeter | CO2-meter Velcorin | Burdomat II G | 2004 Bottle inspection | KRONES | Checkmat FM-G Fill height (underfill) and cap control Labelling machine | Krones| Unimodul 600-15 | 2004 Bottle inspection | KRONES | Checkmat E | Label Check existence | 2004 Date stamping | Excel 170i UHS | 2004 Shrink Packer | KRONES | Variopac FS-30 | 2004 Handle Application | Comag | H 40/2 | 2004 Palletizer | KRONES | Robot 3A Palletsafety | Lachenmeier Multi Flex 1

Condition: good (used), functionality: fully functional, Year of construction: 1995, machine/vehicle number: 12 28 895, total height: 2,500 mm, total length: 3,000 mm, total width: 1,000 mm, load capacity: 400 kg, main lifting speed: 8,000 mm/min, fine lifting speed: 33 mm/s, throat depth: 2,800 mm, working height: 2,500 mm, Technical specifications Manufacturer: STAHL Fördertechnik GmbH Type: T202 Load capacity: 400 kg Year of manufacture: 1995 Supply voltage: 380 V / 3-phase / 50 Hz Lifting speed: 8 / 2 m/min Motor power: 1.3 / 1.1 kW With pendant control, chain and hook Complete with column-mounted swivel arm STAHL lifting equipment is reliable and durable, even in industrial environments. The T202 model, a 400 kg chain hoist, is known for its lifting speed of 8/2 m/min. Condition Used, industrial equipment in good condition. Sold in the complete condition as shown in the pictures. Price: 1,000 EUR STAHL 400 kg Electric Jib Crane with Electric Chain Hoist – 1,000 EUR Description For sale is a STAHL electric jib crane complete with an electric chain hoist, pendant control and lifting chain. The unit is in good used condition and is ready for operation. STAHL is a well-known German manufacturer of high-quality industrial lifting equipment, recognized for its reliability and long service life. Technical Specifications Manufacturer: STAHL Fördertechnik GmbH Model: T202 Load Capacity: 400 kg Year of Manufacture: 1995 Power Supply: 380 V / 3 Phase / 50 Hz Lifting Speed: 8 / 2 m/min Motor Power: 1.3 / 1.1 kW Electric Chain Hoist Pendant Control Included Lifting Chain and Hook Included Complete Jib Crane Assembly Condition Good working condition Complete unit Ready for installation Dodpfx Aaezkam Aoxewb Industrial quality German equipment Included Electric chain hoist Jib crane Pendant control Lifting chain Hook Price: €1,000 Location: Hungary Seller: Variflux Kft.

Condition: used, Year of construction: 2000, machine/vehicle number: LC348, Used Filling Line For Edible Oil In PET 1L Bottles Capacity: 6.000 bph x 1,0 L Blow Molding Machine KOSME KSB 3000 – 2001. – 2 pcs x 3.900 bph Box for preforms with transport to the blower Compressor for cooling moulds MTA S.R.L. – 2000 KOSME bottle air conveyor – 1999 Dwsdpfjyhbzdjx Aaxjb AISI 304 stainless steel Electrical control cabinet with PLC Built-in air filters It transports bottles from blower to filler Filling Monoblock Filler and capper – ICS-Slovenia – 1995 – 6.000 L/h Labelling Machine Labeller ICS – 1995 – paper labels, cold glue Conveyor belts ICS – 1995 Packer in transport boxes 3×5 bottles – ICS – 1995 Shrink Wrapper Shrink wrapper SMIPACK-packer in foil 2×5 bottles – 2013 Pallet Wrapper Pallet wrapper ZLATOROG-Slovenia – 1999 Compressor KAESER low and high pressure compressors – 2000 Refrigeration dryer There are spare parts worth It has complete technical documentation Required space for equipment: 600 m2 Required installed power (equipment, compressors, refrigerators): 495 kW The Used Filling Line For Edible Oil In PET can be seen in full production function until December 15, 2022

Condition: ready for operation (used), Year of construction: 2019, operating hours: 25,500 h, clamping force: 10,000 kN, screw diameter: 110 mm, displacement volume: 3,136 cm³, Sumitomo SHI Demag EL-Exis SP 1000-6300 Dwedpsygk Eiefx Aaxjb

Condition: used, Used filling line for water for PET containers 5L 800bph This used filling line for water for PET containers 5L 800bph provides a complete solution for processing 5-liter PET bottles, both round and square. Specijalka from Serbia manufactured the line in 2006. Although the owner disconnected it eight years ago, they confirm that it remains in proper condition. Furthermore, you can inspect the line in dry cycle mode. Technical specifications of the filling line The used filling line for water for PET containers 5L 800bph reaches a nominal output of 800 bottles per hour with 5.0-liter containers. Specifically, the system includes a 10-valve rinser, an 8-valve filler, and a 4-head capper, all integrated in a monoblock. Additionally, a cold-glue labeler applies paper labels. As a result, the setup handles rinsing, filling, capping, and labeling in a compact layout. PET bottle production unit Dwsdewr T E Dspfx Aaxeb In addition to the filling line, this offer includes a semi-automatic PET bottle blower built in 2004. The machine uses two-cavity molds and can produce 800 bottles per hour at 0.5 liters, 600 bottles per hour at 1.5 liters, and 400 bottles per hour at 5 liters. Notably, the system uses water cooling to maintain operational price includes molds for 0.5-liter round bottles and 5-liter square bottles. Consequently, this unit complements the filling line perfectly and allows in-house preform blowing. High-performance compressor for blowing To support the above components, a BOGE compressor from Germany (2006) is also available. It delivers 11 kilowatts of power, 35 bar of pressure, and a flow rate of 1290 liters per minute. Moreover, the system includes a 1000-liter air tank rated for 40 bar. The unit has only logged 500 operating hours. Thus, it remains in excellent mechanical condition. Importantly, this component ensures adequate air supply for blowing PET bottles reliably and efficiently. Technical conclusion In summary, this used filling line for water for PET containers 5L 800bph enables small to medium-sized producers to manage the complete bottling process autonomously. Specifically, the line handles rinsing, filling, capping, and labeling. Meanwhile, the included blower and compressor provide the necessary infrastructure to blow bottles from preforms. Therefore, producers can oversee every phase of water bottling from bottle production to final packaging.  

Condition: new, Year of construction: 2026, overall weight: 100 kg, total height: 100 mm, total width: 900 mm, total length: 800 mm, power: 1.5 kW (2.04 HP), The XHS-series Vertical Mixer is designed for fast and uniform mixing of plastic granules, masterbatch, recycled materials, and additives before processing. Its efficient paddle mixing system provides excellent blending performance while minimizing energy consumption. The mixer features a durable stainless steel hopper and mixing blades, ensuring long service life, easy cleaning, and contamination-free material handling. It is suitable for extrusion, injection molding, blow molding, compounding, and plastic recycling applications. Technical Specifications • Model: XHS-50V Dedpfx Aezvxl Ijaxewb • Hopper capacity: 50 L • Mixing capacity: 20 kg per batch • Mixing time: 20 kg in 6–8 minutes • Mixing motor power: 1.5 kW • Paddle speed: 50–60 rpm • Power supply: 380 V, 3-phase • Dimensions (L × W × H): 800 x 900 x 1000 mm • Construction: Stainless steel hopper and mixing paddles • Weight: 100 kg • Control system: Control box with timer relay • Model: XHS-100V • Hopper capacity: 100 L • Mixing capacity: 40-50 kg per batch • Mixing time: 50 kg in 6–8 minutes • Mixing motor power: 3 kW • Paddle speed: 50–60 rpm • Power supply: 380 V, 3-phase • Dimensions (L × W × H): 960 x 1000 x 1200 mm • Construction: Stainless steel hopper and mixing paddles • Weight: 150 kg • Control system: Control box with timer relay • Model: XHS-150V • Hopper capacity: 150 L • Mixing capacity: 50-70 kg per batch • Mixing time: 75 kg in 6–8 minutes • Mixing motor power: 4 kW • Paddle speed: 50–60 rpm • Power supply: 380 V, 3-phase • Dimensions (L × W × H): 1080 x 1080 x1200 mm • Construction: Stainless steel hopper and mixing paddles • Weight: 210 kg • Control system: Control box with timer relay • Model: XHS-250V • Hopper capacity: 250 L • Mixing capacity: 100–120 kg per batch • Mixing time: 120 kg in 6–8 minutes • Mixing motor power: 7.5 kW • Paddle speed: 50–60 rpm • Power supply: 380 V, 3-phase • Dimensions (L × W × H): 1400*1200*1550 mm • Construction: Stainless steel hopper and mixing paddles • Weight: 290 kg • Control system: Control box with timer relay Efficient Mixing System The XHS-250V uses horizontally rotating stainless steel paddles that provide fast and homogeneous mixing of plastic materials. The paddle geometry is designed to maximize mixing efficiency while keeping power consumption low. The robust mixing blades offer excellent wear resistance, long service life, and can be cleaned quickly between production batches. Easy Material Discharge The mixer is equipped with a bottom discharge outlet, allowing quick and convenient unloading of mixed material directly into containers, vacuum loaders, or processing equipment.

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection Unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 cm³ Clamping Unit: Clamping force: 250 t Dwedpfxjzy In Tj Aaxsb Tie bar spacing: 630x630 mm Platen dimensions: 995x1050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 – touchscreen Additional Equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Hot runner control x 16 Hardened injection unit – bimetallic Energy-efficient machine – equipped with a system of 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Additional oil filtration pump Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes driven by servomotors (electric): X, Y, Z, B; C axis Touch screen control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at an extra charge Dimensions: Weight: 20,100 kg Length/Width/Height: 6.50x2.20x2.30 m All machines offered are started up by our service technicians before sale. A video of the technical tests of the selected machine can be provided or it is possible to participate in live technical tests at our facility in Łódź. Price: On request

Condition: used, Used Bottling Line KRONES for still, sparkling water and CSD 12000 bph The Used Bottling Line KRONES for still, sparkling water and CSD 12000 bph ensures good-performance bottling for mineral water, sparkling water, and carbonated soft drinks (CSD). Specifically, it processes PET containers in 1.5 l format, using isobaric filling technology to preserve the quality of both carbonated and non-carbonated beverages. Moreover, the bottle neck standard is PCO 1810. In addition, this Used Bottling Line KRONES for still, sparkling water and CSD – 12000 bph integrates synchronized machines, thereby optimizing every production step, from preform feeding to final packaging and palletizing. Preform Feeding and Preparation in this Used Bottling Line KRONES The process begins with the preform feeder, which continuously supplies preforms to the preform inverter. As a result, the line maintains a smooth and consistent flow, with correct alignment of preforms before the blowing process. Blow Molding Machine Next, the blow molding machine—a Krones Contiform Compact 10, year 2001—uses a Siemens S5 control system to manage heating and blowing phases. Consequently, it transforms preforms into precisely shaped PET bottles ready for downstream processes. Air Conveyors of the Used Bottling Line KRONES for still and sparkling water Once the bottles are formed, they are transferred via Krones AirCo air conveyors, model AirCo, year 2011. These conveyors extend for approximately 110 meters. Furthermore, they are controlled by inverters and a Siemens S5 controller, ensuring the transport to the next station. Mixing and Carbonation Unit Before filling, the product passes through the mixing and carbonation unit, a Krones MS, year 1992. This system mixes water and syrup, and then carbonates the product with CO₂ for sparkling drinks, or injects nitrogen for still water. Notably, the unit ensures continuous operation and mixing, thus maintaining product consistency throughout production. Filling Monoblock Following the mixer, the filling monoblock—Krones VK PET 100 SV K, year 1993—comes into action. Controlled by a Schleicher system, it includes: Bottle rinsing unit Isobaric filling machine, suitable for both still and carbonated beverages Capping unit for PCO 1810 PET bottles CIP (Cleaning-In-Place) connections Dedpjwa Tqcofx Aaxewb Capacity to handle 1.5 l format Importantly, this unit represents the heart of the line, performing several critical functions within a compact and coordinated block. Labeling Machine Immediately after filling, a Krones labeling machine, model Canmatic, year 1997, applies labels to PET bottles with precision. As such, it ensures accurate positioning and high throughput, contributing to a professional final presentation. Shrink Wrapper Subsequently, the shrink wrapper—Dimac Green Star Big, year 2011—forms multipacks using shrink film.

Condition: excellent (used), Year of construction: 2017, Arburg 420C 1000-290 e² / Hybrid machine / Production line with Arburg Multilift Select robot Year of manufacture: 03.2017 Injection unit: Screw diameter: 30 mm Shot weight: 97 g Injection pressure: 2500 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Operating hours: 20,669 h in automatic operation Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control system with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - driven by a servo motor with inverter - energy saving Dwedpfx Aajzy I Dnsxeb Proportional valve on the injection unit – precise injection Outputs for: closing of the pneumatic nozzle and dosing device Arburg Multilift Select 6kg robot, traverse Year of manufacture: 11.2016 5-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic, Axis B - rotation Travel ranges in axes: X-400, Y-600, Z-1000 Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 3720 kg Length/Width/Height: 4.30x1.63x2.07 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2012, Arburg 520S 1600-400/170 e² / Production line with Geiger robot Dodpjzy I Rbofx Aaxjwb Year of manufacture: 2012 Injection unit: Screw diameter: 35 mm Shot weight: 141 g Injection pressure: 2500 bar Dosage volume: 154 ccm Clamping unit: Clamping force: 160 t Tie bar spacing: 520 x 520 mm Platen size: 695 x 695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: 2K injection molding machine with rotary table and Geiger robot Very good technical condition Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 5 Control system with 12 hot runner zones Reinforced injection units – bimetallic Machine with two cylinders / batteries with compressed nitrogen (additional charge for fast operation) The machine features a built-in servomotor in the injection unit responsible for dosing the plastic Parallel movements Screw diameter in the vertical injection unit: ⌀30 mm - 77 g/PS Integrated Arburg brand conveyor belt and sorting flap Original Weber brand rotary table, highly precise – electrically driven (integrated inverter in the machine) Rotary table and robot available as an additional purchase Dimensions: Weight: 8140 kg Length/Width/Height: 4.81 x 1.84 x 3.45 m All offered machines are started up by our service technicians prior to sale. A video of the technical tests for the selected machine can be provided, or you can participate in live technical tests at our facilities in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2012, Arburg 520H 1500-800 e² / Hybrid Machine / Production Line with Side Robot Arburg Multilift H Year of manufacture: 09.2012 Injection Unit: Screw diameter: 55 mm Shot weight: 434 g Injection pressure: 1650 bar Dosage volume: 474 ccm Clamping Unit: Clamping force: 150 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping unit: toggle lever Control system: SELOGICA - Touchscreen Additional equipment: Hybrid machine: high-speed, energy saving, and very quiet Control with air valve Core pull control 12-fold hot runner control Injection unit hardened - bimetallic Main drive motor - servo motor with inverter for energy saving The injection unit is powered by a servo motor, controlled by inverter Machine with cylinder / compressed nitrogen accumulator (additional charge for fast cycling) Djdpozy I I Tofx Aaxjwb Central lubrication Automatic mold height adjustment Kistler sensor – mold pressure regulation The injection molding machine was operated in a so-called 'cleaning room', equipped with extra protective devices against contamination as well as two fume absorbers Side robot Arburg Multilift H Year of manufacture: 2012 5-axis robot: Z-axis driven by servo motor (electric); X-, Y-, and B-axis (rotation) pneumatic Safety package for robot Robot with adapter, conveyor belt with electric height adjustment, protective enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 6840 kg Length/Width/Height: 5.03x1.56x2.21 m All machines offered are test run by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: X66924, clamping force: 6,600 kN, screw diameter: 115 mm, clearance between the columns: 1,000 mm, displacement volume: 5,349 cm³, injection pressure: 1,800 bar, injection weight: 5,082 g, opening stroke: 1,200 mm, Used Stork IMM 6600EP-8650 injection molding machine. The machine has been overhauled, tested and repaired. Dwsdpfewhk Iuex Aaxjb

Condition: excellent (used), Year of construction: 2012, Arburg 820S 4000-2100/400 / Production line with the robot Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection unit: Screw diameter: 60 mm Injection weight: 723 g Injection pressure: 2500 bar Dosing volume: 792 cc Clamping unit: Clamping force: 400 t Bar spacing: 820x820 mm Size of the clamping plates: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in Automatic operation Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 pairs Control with hot runners x 24 Reinforced injection units - bimetal Proportional valve on the vertical injection unit - precise injection Machine with six cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Automatic tool height adjustment Screw diameter in the vertical injection unit: ⌀40 mm - 184 g/PS The built-in system for controlling the print quality from the Sensor Kistler brand - measuring the tool pressure Original Weber rotary table: very precise, electrically driven by a servo motor controlled by an inverter Rotary table diameter: 1200 mm Purchase of the rotary table at an additional cost Robot Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel paths in axes approx.: X-5000, Y-1400, Z-2000 Automatic axis lubrication Touch control panel The robot safety package Robot with adapter and protective housing Purchase of the robot for an additional charge Dedjzy I Tpjpfx Aaxowb Dimensions: Weight: 21000 kg Length/width/height: 8.00x2.32x4.21 m All machines offered are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to take part in live technical tests in our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2017, Ferromatik Milacron Magna T (MTs) 150-450 / Production line with Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt and protective enclosure / Machine in excellent technical condition Year of manufacture: 2017 Injection Unit: Screw diameter: 45 mm Shot weight: 215 g Injection pressure: 1984 bar Dosage volume: 226 ccm Clamping Unit: Clamping force: 150 t Tie bar spacing: 510x510 mm Platen dimensions: 740x740 mm Ejector: hydraulic Clamping system: toggle lever Control system: B&R touchscreen Additional equipment: Hybrid machine: high-speed, energy-efficient and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Hot runner control unit x 36 (available at extra cost) Injection unit is wear-resistant and corrosion-resistant Dwjdpfszy Iiqox Aaxjb Main motor – servo motor driven by inverter Central lubrication Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) Wemo 6-5 xDesign Robot Year of manufacture: 2017 4-axis robot: 3 axes driven by servo motors (electric) Safety package for robot Robot with adapter, Wemo WCS-R conveyor belt and protective enclosure Purchase of the robot and conveyor belt at additional cost Dimensions: Weight: 7,500 kg Length/Width/Height: 6.10x1.97x2.60 m Drive: Pump/Motor: 11.5 kW Heating power: 11.3 kW Total power: 22.8 kW All machines offered are commissioned by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to take part in live technical tests at our company in Łódź. Price: 25,000.00 EUR

Year of construction: 2022, operating hours: 15 h, condition: used, functionality: fully functional, operation weight: 30 kg, feed force X-axis: 20,000 N, pipe diameter (max.): 14 mm, machine/vehicle number: 79000, Lancier Smart Wheel 2022, used very little Very few operating hours (approx. 38 hours) Includes extensive accessories Includes HONDA EU22i generator Includes cable guiding set 2.6 mm - 3.7 mm Includes cable guiding set 6.7 mm - 9.0 mm Includes drive wheel set without groove 0.8 - 3.4 mm Includes drive wheel set with groove 3.5 - 9.0 mm Includes steel transport box Includes compressed air hose with claw coupling, 10 m The blowing device Automatic logging For cable diameter 1.5 - 9 mm For outer pipe diameter 7 - 14 mm Blowing speed 0 - 100 m/min Dwsdozphdtopfx Aaxjb Thrust force 20 daN L x W x H 500 x 400 x 400 mm Weight: approx. 30 kg Order no. 79000

Condition: used, Year of construction: 1998, operating hours: 93,000 h, functionality: fully functional, machine/vehicle number: 174380, clamping force: 2,000 kN, screw diameter: 60 mm, clearance between the columns: 560 mm, mold height (min.): 1,050 mm, input frequency: 50 Hz, input voltage: 400 V, input current: 222 A, Equipment: documentation/manual, For sale: 200-ton Krauss Maffei injection molding machine. The machine is currently in production and can be inspected while in operation. Distance between columns (H x V): 560 x 560 mm Platen size: 915 x 915 mm Max. open height: 1050 mm Dwedpfx Aszwwyajaxsb Min. mold height: 350 mm Opening stroke: 700 mm

Condition: good (used), Hoza EMU punch This machine is ideal for punching out small molded parts from paper, rubber or textile goods. It has a high pressing force and fits on any stable table. The cut is initiated via a two-hand safety control. Forged blades or steel rule blades can be used in the machine. Knife stroke: 30 mm Max. punching format: 150 x 100 mm Weight: approx. 150 kg Color: hammer blow blue Dimensions: 450 x 360 x 600 mm Dwedpfouzhmtjx Aaxsb Further items in other sizes - new and used - can be found in our store! International shipping costs on request!