Used Blow Film Extruder for sale (3,657)

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Layers: 5 Web Width: 1,500 mm Film thickness range: 10–45 μm Output: - 15 μm: up to 745 kg/h - 17 μm: up to 845 kg/h - 23 μm: up to 905 kg/h Final film widths (per bobbin): - 3 x 500 mm - 6 x 250 mm - 3 x 400 mm - 2 x 750 mm Coextrusion Structure / Number of Layers: 5 layers Layer distribution: B / A / D / A / C Percentage: 10 / 35 / 10 / 35 / 10 % Raw materials: - LLDPE: 2.8–5.0 g/10min (190°C/2.16kg) - VLDPE: 2.8–5.0 g/10min (190°C/2.16kg) Extruder "A": 90/33 L/D, Maximum LLDPE output: 800 kg/h Ksdpsxyuffjfx Aa Eonf Extruder "B": 60/28 L/D, Maximum LLDPE output: 200 kg/h Extruder "C": 60/28 L/D, Maximum LLDPE output: 200 kg/h Extruder "D": 60/28 L/D, Maximum LLDPE output: 200 kg/h Flat die lip width: 2,050 mm Roll width: 2,100 mm Chill roll C1 diameter: 1,600 mm Maximum mechanical speed: 650 m/min MATERIAL FEEDING AND DOSING "A": - 1 main component material feed - 1 additional component material feed - 1 gravimetric batch dosing system (mounted directly on the extruder, 3 components) MATERIAL FEEDING AND DOSING "B, C, D": - 3 main component material feeds - 6 additional component material feeds - 3 gravimetric batch dosing systems (mounted directly on the extruder, 3 components each) Extruder "A": - SML Single-Screw Extruder SML-ES-90/33 - Tool unit: Manually operated screen changer SML-MF-man/90 Extruder "B, C, D": - 3 SML Single-Screw Extruders SML-ES-60/28 - 3 Tool units: Manually operated screen changers SML-MF-man/60 Cloeren 5-layer/3-up Stretch Film System consisting of: - 1 five-layer feedblock FG - 1 automatic flat die, 2,050 mm (for automatic die control) - 1 die splitting system for flat die body separation and cleaning - 1 vacuum box, 2,050 mm - 1 triple-chamber vacuum box SML-TC/2050mm Cooling and take-off unit: - 1 casting section SML-CS/2100/650 - 1 electrostatic edge pinning device - 1 thickness measuring unit (X-ray sensor for automatic dies, stretch wrap film) - 1 recovery system for feeding stretch wrap film with vertical scraptruder for SML 90 mm single-screw extruder - 1 antistatic pipe - 1 power supply unit for antistatic pipes Winding unit: - 1 Cast Film Turret Winder Series W4000 for stretch wrap films - Max. end film width: 3 x 500 mm - Number of turrets: 1 - Number of winding shafts: 4 - Winding shaft diameter: 3" - Max. mechanical winding diameter (3" bobbins): 400 mm - Min. winding diameter: 82 mm - Winding tension: 15–100 N/m - Contact pressure: 50–500 N - Cycle time (3" core magazine): 20–25 s - High-speed Cast Film Turret Winder for stretch wrap film—compatible with 3" air shafts, contact winding mode - 1 automatic core and roll handling system W4000 4S1T (per turret) - 1 oscillating frame SML-OF/2100 Control and data logging: - 1 SML Automatic Control System SML-CS-2/SMILE/4 extruder - 1 SML Data Logging System: SMILE Process Analyzer - 1 E-container (20 ft) Chiller: Frigosystem Compressor unit: MSD V 30-37

Year of construction: 1997, operating hours: 76,200 h, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1997 and is in great condition. Knodpfetpg D Uox Aa Eof Make: Hans Weber GmbH Model: NE 7 048 Screw type: single screw Year of construction: 1997 Propeller Ø: 75mm Working hours: 76,200

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 0808339, Size 52 x 74 cm, Automatic feeding, Adjustable side bracket, Temperature control by sensor, Pneumatic pressure roller. Knjdpormkm Iofx Aa Esf

Condition: ready for operation (used), One complete and one partially dismantled extruder system Davis are available. 1) Davis Standard DS-25, power: 6385W, max. melt pressure: 700bar, max. temperature: 315°C. Including 4x screws, 6x bursting discs, Digicolor dryer, platform, screen changer with heating and sealing pack, new cylinder, 3x screw seals, and spare drive motor. 2) Davis Standard DS-20, power: 4500W, max. operating pressure: 700kg/cm², max. temperature: 315°C. Including Conair dryer, 3x screws, screen changer with heating and sealing pack, cast housing, extrusion tool, and spare drive motor. General accessories: various ring heaters, 3x Eurotherm temperature controllers, and 3x Eurotherm pressure sensors. Documentation available. An on-site inspection is possible. Knodpfxexn S Ums Aa Eof

Condition: used, Year of construction: 2016, functionality: fully functional, Pratika 56-T that has been standing still for the last 5 years. Knjdpfsxpq Hksx Aa Eof

Condition: used, Used Buss extruder PLK 100 for sale. The extruder was used in the powder coatings sector. Knsdjvfd Uqjpfx Aa Ejf The extruder is fully functional

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: M08E/9059, Offer Number: M08E/9059 Machinetype: 5 die - 5 blow transfer header Info: bushing cut-off Make: KIESERLING Type: K55 Constr. year: 1979/2002 diameter range: 8-22 mm number of dies: 5 number of stations (incl. cut off): 6 output - pieces/min: 105 shaft length under head: 6-140 mm cutting length: 175 mm Knodpjxlr I Ijfx Aa Eof press power: 250 to Location: Europe

Year of construction: 1997, operating hours: 58,668 h, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1997 and is in great condition. Make: Hans Weber GmbH Model: NE 7 042 Screw type: single screw Knsdpfxetpg Dne Aa Ejf Year of construction: 1997 Propeller Ø: 75mm Working hours: 58,668

Condition: like new (used), Year of construction: 2018, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 3200 0088, overall weight: 2,000 kg, total length: 7,300 mm, total width: 1,100 mm, total height: 2,000 mm, input voltage: 400 V, input current: 125 A, type of input current: three-phase, input frequency: 50 Hz, cooling capacity: 30 kW (40.79 HP), operating speed: 83 mm/s, Manufacturer IBT.InfraBioTech GmbH Art.-No. 3200 0088 Technical Data Condition: As new; little used from test series Functionality: Fully functional Year of manufacture: 2018 Connected load: 58 kW Cooling capacity, water connection on-site: 30 kW Conveyor belt length: 7,000 mm Conveyor belt width: 310 mm Infeed height: 55 mm Infeed width: 308 mm TECHNICAL DETAILS Application: Conveyor oven for curing in film bonding technology Component temperature: max. 100°C Stainless steel housing (LxWxH): 7,300 x 1,100 x 1,680 mm Overall height without control cabinet: 2,000 mm Control cabinet (WxDxH): 1,200 x 600 x 2,100 mm Base frame made of stainless steel profile tube, height adjustable: ± 30 mm Conveying system Vacuum conveyor belt made of silicone, belt 310 mm wide Transport speed: max. 5 m/min Conveyor belt height: 950 mm ± 30 mm Belt infeed/outfeed openings (WxH): 308 x 35 mm Free area infeed: approx. 750 mm Free area outfeed: approx. 750 mm Conveyor belt operation: Continuous operation, adjustable up to max. 5 m/min, tracking regulation with light barrier safety system at infeed and outfeed. Loading and unloading are performed manually. Intended use The curing oven is a belt system for continuous operation with a feed speed of max. 5 m/min. Open areas at the infeed and outfeed sections are provided for loading and unloading components. The enclosed heating section houses 6 IR modules (height adjustable). The maximum component temperature is 100°C and serves to heat solvent-free adhesive between composite film layers. The return side of the belt, the rear sides of the IR modules, and the space above the heating modules are water-cooled. Components are held onto the conveyor belt by vacuum. The control cabinet is located separately from the machine outside the cleanroom. The system operates in a cleanroom according to EN ISO 14644 Class 8 and is loaded and unloaded by the operator. The equipment is exclusively for the warming of film composites. Features - 6 adjustable infrared heating modules, each with 6 infrared emitters - 6 pyrometers for precise temperature control - PU conveyor belt for efficient material flow - Integrated control and regulation system - Height-adjustable stainless steel base frame - Vacuum conveyor belt - Cooling water distribution in the base frame (G1") - Water cooling for the belt return section and rear sides of IR modules Kjdpownm Uksfx Aa Ejnf - Mechanically lockable service doors - Operator panel mounted at the infeed on the left side - Control cabinet cooling unit, water connection on-site History This oven was intended for use in a cleanroom environment and was only used briefly for a test series. The oven was used for curing solvent-free adhesives between composite film layers.

Condition: ready for operation (used), A 3-side sealing packaging machine Beck is available. Processing materials: recyclable mono films/recycled material/bio film, product width range: 20mm-400mm, max. product height: 200mm, max. packaging capacity: 60cycles/min. Including beck heat shrink tunnel. Documentation available. An on-site inspection is possible by appointment. Kodpfx Aaoxn Aame Eenf

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Manufacturer: Krones Model: Contiform S16 Year: 2006 Type of Machine: Stretch blow molder Capacity: 26,000 Bph Format: 0.5L / 1.0L / 1.5L Neckfinish: 38 mm Kodpoxva N Ujfx Aa Eenf Condition: still installed Including: Preform feeding, tilting device by Tanner, chiller.

Condition: excellent (used), functionality: fully functional, Brabender Single-Screw Extruder – 19 mm / 60 L/D – with Extensive Accessories Technical Data & Features: • Screw diameter: 19 mm • L/D ratio: 60 • 6 heating zones • Equipped with degassing • Cooling: fan and water cooling • Control via Brabender PL 2100 controller – allows computer connection and process analysis • Mobile unit with castors Accessories & Spare Parts: • Strand die • Flat film die • Temperature control units • Computer connection cable and interface • Various spare and wear parts Special Features: • Compact design • Ideal for laboratory and pilot testing Knjdpfxew Iqido Aa Eof • Comprehensive process monitoring and evaluation options • Ready for immediate use

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Farmet extruder FE250, 22kw motor, with command cabinet, made to extrude soybean, grain, rapeseed/sunflower after prepressing, or pet food (with additional cutting head, not included). Condition is very good, most of working parts replaced. Knsdpfx Aajwbkyke Esf Capacity 250-400kg/h

Condition: good (used), functionality: fully functional, Working from production, has always run with an 800 mm extrusion head for producing HDPE pipes. Kjdowr Db Njpfx Aa Eonf

Condition: used, Year of construction: 2000, Overview The KSB3000 blowing machine was manufactured in 2000 by the Austrian machine builder KOSME. It is located at a machine builder and can be visited in dry run to see the functionality of the machine.  Technical details  Capacity: 3.600 bph  3 cavities Dimensions (LxWxH): 6830 mm x 2860 mm x 2450 mm  Space requirement approx. 9x5 m²  Weight: 4,5 t  Operating hours: 23.824   Bottles Volume: 250 ml - 2500 ml   Max. Diameter: 110 mm  Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed). Ksdpfxol Hxpne Aa Ejnf

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, Manufacturer: Krones Model: Contiform S8 Year: 2004 Type of Machine: Stretch blow molder Capacity: 13,000 Bph Format: 1.0 L / 1.5 L Neck finish: 38 mm Knodpfexva I Rjx Aa Eof Condition: still installed Including: Preform feeding, tilting device by Tanner, chiller.

Condition: excellent (used), functionality: fully functional, Berstorff Twin-Screw Extruder ZE (CL) 25 Technical Data: • Year of manufacture: 1997 • Motor power: 11.6 kW • Heating capacity: 16 kW • Screw speed: 500 rpm Screw: • Co-rotating twin-screw extruder, 2 × 25 mm × 30 L/D • Modular construction (screw elements) • 2 × degassing zones • K-TRON twin-screw feeder Control: • Conventional contactor control • Control cabinet integrated into machine frame • Separate operating panel with control interface • Digital displays (temperature and melt pressure) as well as various indicator lights Miscellaneous: • Machine is connected and ready for testing • Test run possible by arrangement Ksdpfsw Iqhmex Aa Eonf

Year of construction: 1991, operating hours: 32,000 h, condition: refurbished (used), • One pair of original WEBER screws (excellent condition, including measurement report • One pair of non-original screws Kedpfxswaxuao Aa Eenf • Gearbox inspected and partially revised by WEBER • Control upgraded to WPS control • Output on PVC around 700 kg/hour

Condition: used, Year of construction: 2001, Overview The KSB3000 blowing machine was manufactured in 2001 by the Austrian machine builder KOSME. It is located at a machine builder and can be visited in dry run to see the functionality of the machine.  Technical details  Capacity: 3.600 bph  3 cavities Dimensions (LxWxH): 6830 mm x 2860 mm x 2450 mm  space requirement approx. 9x5 m²  weight: 4,5 t  Operating hours: 19.935   Bottles Volume: 250 ml - 2500 ml   Max. Diameter: 110 mm  Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed). Knedpfx Aol Hxprja Eef

Year of construction: 1989, operating hours: 24,048 h, condition: good (used), machine/vehicle number: DS 85 777, Brand Hans Weber Maschinenfabrik GmbH Type DS 8.7 Knedpfx Aajvuzqzo Eef Serial number DS 85 777 Type Screw Double screw Year of manufacturing 1989 Working hours 24.048 H Screw diameter 87 mm Connection Load 90 kW

Condition: used, Year of construction: 2006, Overview The BLOMAX 4 blow molder was manufactured by the German company SIG Corpoplast (now KHS) in 2006. It has been overhauled by a machine builder and can be inspected in dry operation. Blow molds are not included, but can be obtained.  Technical details  Output: up to 7,200 bph 4 cavities Dimensions: 4960 mm x 3900 mm x 3000 mm  Weight: 15 t  Operating hours: 44.736  Bottles Volume: 200 ml - 2000 ml   Max. Diameter: 115 mm  Max. Length: 350 mm Preforms  Length: 60 - 200 mm Max. Support ring diameter: 35 mm  Scope of delivery  Blow molder is completely equipped with the system for preform feeding (silo, elevator, sorting, chute) Knodpfx Aael Hxpke Ejf

Year of construction: 1993, operating hours: 104,599 h, condition: good (used), Brand Cincinnati Milacron Austria GmbH Type CMT 35 Machine number 2005723/10 Type Screw Conical Double Screw Year of manufacturing 1993 Machine hours 104,599 hours Screw Diameter 35mm Kjdpfjvl Hzgjx Aa Eenf Dimensions (LxWxH) 3200 x 1500 x 1720 mm Weight (approx) 2000kg

Condition: used, Year of construction: 2002, Overview The blow molder was built in 2002 by the former manufacturer SIG Corpoplast (now KHS). The machine is still in operation and can be visited. Technical data Nominal capacity: 30,000 bottles/h Last used formats: 1.0L (27,000 bph) 1.25L (27,000 bph) 2.0L (22,500 bph) Bottle Volume: 200 - 3,000 ml Max. Diameter: 126 mm Length: 107 - 350 mm Preform Length: 60 - 200 mm Max. Diameter: 48 mm Dimensions (LxWxH): 9,920 mm x 6,279 mm x 3,357 mm Required space: 11,500 mm x 11,300 mm  Weight: 31.15 t Scope of delivery Blomax 20 Preform feeder VT 3010 Kodpfx Aery Iiwea Eonf

Year of construction: 1998, operating hours: 64,082 h, condition: good (used), This Cincinnati extruder is in machine storage at Plastima Used Machinery. The machine is from 1999. Special note: the extruder lacks the gearbox. – Brand: Cincinnati – Model: Titan 45R-APC – Construction year: 1998 – Conical double screw extruder – Screw Ø: 45 mm – Working hours: 64.082 Ksdpfx Aaeq Tr T Ro Eenf

Year of construction: 1983, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1983 and is in fine condition. Knedpfoq Tr Tbjx Aa Eef - Brand: Hans Weber GmbH - Model: ZE 30 - Year built: 1983 - Single-screw extruder - Screw Ø: 30 mm - Ratio: 20 L/D