Used Film Processor for sale (1,757)

Condition: ready for operation (used), Plastic Film Wash Line with Extruder Dkedpfx Aezylxija Hst Available in Ireland Can be seen running if necessary Sink Float Tank Centrifuge Washer Dryer Extruder Granulator Shredder Everything required for the washing and recycling of Plastic Material 1 Tonne per Hour

Year of construction: 2013, condition: ready for operation (used), Mariani Shrink film wrapper Model: TRM 700-LF-I YOM 2013 Including in/outfeed conveyor system Working width: 700mm Djdeyilyqspfx Aa Hjkt Cardboard Trays – Cases with protective shrinked film Portion packs : 3 x 8 – 3 x 9 – 3 x 10 Family packs : 2 x 6 – 3 x 4 Output: Max 25 trays per min, varying according to the format required Dimensions machine (LxWxH): 5000x1400x2100mm

Year of construction: 2019, condition: like new (used), Automatic intermittent-motion machine designed in accordance with cGMP standards for wrapping with stretch film. Conceived primarily for the cosmetics and pharmaceutical markets, simplicity of design and high-speed output are its main features. Main features: Servo driven motor guarantees reliability and synchronized movement even at high speed Machine and motors managed by PC Dksdpfxoyb Tvts Aa Hjt Balcony style structure with clear division between mechanical parts situated at the rear of the machine and product flow at the front Ergonomic structure facilitates machine inspection and provides high workflow visibility Simple and linear construction for easy cleaning Speed, strokes and single group positions are set up from the PC by programmable logics, making correct machine set-up automatic and size changeover extremely quick and easy

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, sheet thickness (max.): 3 mm, working length: 2,500 mm, TECHNICAL DETAILS Sheet thickness with tensile strength of 410 N/mm² max.: 2.00 mm Sheet thickness with tensile strength of 600 N/mm² max.: 1.25 mm Sheet thickness with tensile strength of 265 N/mm² max.: 3.00 mm Minimum sheet thickness: 0.50 mm Length of the notched plate at the inlet max.: 2,700 mm Width of the notched plate at the inlet max.: 1,500 mm Rotatable diagonal of the notched plate max.: 2,700 mm Bending length max.: 2,500 mm Clearance for bending above the work table max.: 127 mm MACHINE DETAILS Processor: Intel Pentium III, 500 MHz RAM: 128 MB SDRAM Graphics memory: 4 MB SGRAM Hard disk capacity: 9.1 GB CD-ROM drive: 600 MB Floppy disk drive: 3.5 inch, 1.44 MB Network cards: 2 Dkjdpfozv Rc Sex Aa Hjt Screen diagonal: 17 inches Voltage: 400 V Frequency: 50 Hz Number of phases: 3 Rated power: 38 kW Rated current: 64 A Switching capacity of the main switch: 40 kA Further technical details can be found in the attached documents.

Condition: new, functionality: fully functional, For sale: Huatai 1.5 TPD lecithin drying line with thin film evaporator and vacuum system. New / unused lecithin drying line for soybean lecithin processing, supplied by Huatai. The line is designed for vacuum drying of crude / wet lecithin and reduction of moisture under controlled temperature and vacuum conditions. Main equipment includes: Thin film evaporator / lecithin dryer Lecithin conditioning tank Finished product tank Hot water tank Lecithin cooler Vacuum pre-condenser Vacuum liquid seal tank Receiving / collection tanks Steam separator / steam distribution vessel Pumps, piping, valves and auxiliary equipment Electrical control cabinet / MCC Technical data: Capacity: approx. 1.5 TPD lecithin Process: vacuum drying / thin film evaporation Installed power: approx. 25.2 kW Product contact parts according to manufacturer specification Equipment finish: carbon steel vessels, painted industrial finish; stainless steel parts where required by process design Typical application: Dsdpfozivkbox Aa Hjkt soybean lecithin drying crude lecithin moisture reduction vegetable oil refinery lecithin processing lecithin concentration after degumming food / feed / industrial lecithin processing The line is suitable for small and medium vegetable oil processors who want to add lecithin drying and value-added lecithin production to an existing degumming / oil refining process. The equipment is new and unused. Manufacturer: Huatai. EU seller: Leonagra s.r.o. EU invoice possible. Delivery to Europe can be arranged. The listing includes a process schematic and a realistic visual representation of the complete line. Final layout and painting colour can be coordinated before delivery. Inspection / video call with manufacturer can be arranged on request. Price: FCA / delivered EU by agreement, plus VAT where applicable. Zu verkaufen: Huatai 1,5 TPD Lecithin-Trocknungslinie mit Dünnschichtverdampfer und Vakuumsystem. Neue / unbenutzte Anlage zur Vakuumtrocknung von Sojalecithin. Die Anlage ist für die Trocknung von Rohlecithin bzw. feuchtem Lecithin unter kontrollierten Vakuum- und Temperaturbedingungen ausgelegt. Hauptkomponenten: Dünnschichtverdampfer / Lecithin-Trockner Lecithin-Konditionierungstank Fertigprodukttank Heißwassertank Lecithin-Kühler Vakuum-Vorkondensator Vakuum-Flüssigkeitsverschlussbehälter Auffang- / Sammeltanks Dampfverteiler Pumpen, Rohrleitungen, Ventile und Zubehör Schaltschrank / MCC Technische Daten: Kapazität: ca. 1,5 TPD Lecithin Verfahren: Vakuumtrocknung / Dünnschichtverdampfung Installierte Leistung: ca. 25,2 kW Industrieausführung mit lackierten Kohlenstoffstahlbehältern; Edelstahlteile dort, wo prozesstechnisch erforderlich Geeignet für Sojalecithin, Pflanzenölraffination, Lecithin-Trocknung nach Degumming und kleinere bis mittlere Ölmühlen / Raffinerien. Hersteller: Huatai. Verkäufer in der EU: Leonagra s.r.o. EU-Rechnung möglich. Lieferung nach Europa kann organisiert werden. Besichtigung / Videocall mit dem Hersteller auf Anfrage möglich. Preis: nach Vereinbarung, zzgl. MwSt.

Year of construction: 1995, condition: good (used), Reliable Dyno Industrier tray sealing machine, manufactured in Norway. Suitable for meat, fish, poultry, ready meals, cheese, and other food products requiring vacuum or Modified Atmosphere Packaging (MAP). Specifications: Model: DYNO 320VG / 321VG Vacuum + MAP (gas flush) capability Fully operational and currently in production Semi-automatic operation 4-cavity tray mold installed Film roll system included Original operating manual included Pilz control panel Well maintained and ready for immediate use Ideal for: Meat processors Seafood companies Delicatessen producers Ready-meal manufacturers Small and medium-sized food production facilities Dksdpfx Aozkwd Ssa Hst The machine can be inspected while running and demonstrated to serious buyers. Several molds are available.

Condition: excellent (used), Year of construction: 2021, operating hours: 240 h, functionality: fully functional, operating pressure: 6 bar, We used the machine for PVC tarpaulins. The company is closing down. Technical details can be found in the photo. It has been running without issues, and no maintenance has been required to date, although this can certainly be clarified with the manufacturer in Italy. The machine functions perfectly; there is no overheating. A video call is possible. Three electrodes are included: one fixed electrode, 100 cm x 20 cm one fixed electrode, 50 cm x 2 cm one flexible electrode, 100 cm x 2 cm 400 L/minute 200/300 L of air Working pressure: 6 bar, max. 8 bar. Dedpfxjzy E D Ej Aa Hskt

Year of construction: 2018, condition: excellent (used), functionality: fully functional, The Cryovac VS26 is a semi-automatic vacuum skin packaging machine designed for small to medium-scale operations. It utilizes Cryovac’s Darfresh® films to create high-quality, vacuum-sealed packages that extend product shelf life and enhance presentation. Key features of the VS26 include: Packaging Speed: Capable of producing up to 15 packs per minute, depending on operator loading speed and product configuration. Dedpfsvpq R Hjx Aa Hjkt Versatility: Accommodates a range of product sizes with maximum dimensions of 670 mm (length) x 470 mm (width) x 50/90 mm (height for standard/high chamber versions). Quick-change features allow for easy adaptation to different product formats. Film Compatibility: Designed to work with Cryovac’s Darfresh® films, known for their high formability, sealability, barrier properties, and clarity. The system ensures easy film positioning and unwinding. Product Quality: Produces packages with long shelf life, no vacuum loss, excellent skin effect, reduced drip loss, and optimal product visibility. The trays are made of printable, chlorine-free, and stiff film to meet various customer needs. User-Friendly Design: Features ambidextrous conversion and a robust build that provides easy access for cleaning and maintenance. The machine is designed with ergonomics, safety, and hygiene in mind, meeting relevant European legislation. Safety Features: Equipped with a two-start button control and interlocked guarding, providing a category 1, state-of-the-art safety system. The VS26 is suitable for packaging various products, including fresh meat, poultry, seafood, processed meats, cheese, and ready meals. Its semi-automatic operation and flexibility make it an ideal choice for processors looking to produce high-quality vacuum skin packages without the need for high-volume automatic equipment. Year of manufacture: 2018 One pallet of foil and new knife set included.

Year of construction: 2024, operating hours: 10 h, condition: like new (used), functionality: fully functional, Extrusion Line with Densifier – Ideal for Recycling Applications This robust and versatile extrusion line is perfectly suited for recycling polyolefins such as LDPE, HDPE, and PP. Thanks to the integrated densifier, even materials with low bulk density – such as regrind, EPS, film scraps, and other lightweight plastic waste – can be processed efficiently. The densifier compacts the loose material and feeds it directly into the extruder, ensuring a consistent material flow and stable extrusion process even with challenging input materials. Key Features: • Suitable for all types of polyolefins • Ideal for lightweight, bulky materials like EPS or film regrind • Efficient feeding system via integrated densifier • Compact design and easy maintenance Dodpfx Aetziudoa Hskt This line is an excellent choice for recyclers, plastic processors, and compounders who require flexibility and reliable performance when working with diverse input materials.

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: M 09.10.288, product width (max.): 700 mm, product length (min.): 120 mm, input voltage: 400 V, working height: 850 mm, input frequency: 50 Hz, Equipment: documentation/manual, Kallfass Universa 700 – Fully-Automatic Side Sealer + KALLFASS Schrinktunnel COMPAKT650 D Industrial packaging machine for shrink-wrapping larger products such as picture frames, furniture, insulation material and similar goods. Manufactured by Kallfass Verpackungsmaschinen GmbH (Germany), CE certified. Key specs: Max. production speed: up to 65 packs/min Cross seal bar width: 750 mm Max. sealing frame height clearance: 300 mm Min. product length: 120 mm Film: centre-folded or flat, 12–80 micron; reel diameter up to 400 mm, width up to 900 mm Dkodpfx Ajzwld Hja Hjt Permanently heated seal bar with exchangeable sealing ledge, maintenance-free, PLC temperature control Siemens S7 PLC with colour touchscreen operator interface (multi-language) Power: 400V, 50Hz, 3-phase, 3.5 kVA Dimensions: approx. 2500 x 1400 x 2100 mm Colour: Kallfass Anthracite Complete with original technical documentation and CE declaration of conformity.

Condition: used, Year of construction: 2010, functionality: fully functional, THERMAL processor SIRIO TH 85 with input bridge To connect inline with CTP. MACHINE IS READY TO WORK. Dsdpezquq Asfx Aa Hekt

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, Dsdotndpzepfx Aa Hjkt swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 3,000 kg, rotor diameter: 400 mm, number of blades: 10, total length: 1,120 mm, total height: 1,950 mm, control cabinet length: 500 mm, control cabinet width: 300 mm, control cabinet height: 1,500 mm, total width: 1,210 mm, rotor width: 600 mm, power: 22 kW (29.91 HP), type of input current: three-phase, sieve perforation: 6 mm, warranty duration: 12 months, input voltage: 400 V, inner dimension width: 590 mm, opening width: 400 mm, Equipment: CE marking, ZERMA GS 400/600 – High-Performance Granulator | Precision. Performance. Reliability. Dkjdpfx Aaozmhgie Het Experience the new ZERMA GS 400/600 high-performance granulator in action. The GS series was developed for the highest demands in plastic recycling and combines maximum performance with exceptional reliability and easy maintenance. Highlights ✔️ Rotor diameter: 400 mm ✔️ Rotor width: 600 mm ✔️ Proven ZERMA V-Cut technology ✔️ 5-knife rotor ✔️ 3 stator knives ✔️ Robust steel construction ✔️ Intelligent drop-down cutting system ✔️ External knife adjustment ✔️ Robust bearing outside the cutting chamber ✔️ Optional bypass hopper for long profiles and pipes ✔️ Designed for continuous industrial operation Typical applications * Packaging tapes (at 8 mm, 600 kg/h) * Runners and injection molded parts + start-up lumps up to 1 kg * Plastic profiles * Pipes * Sheets * Films * Blow molded parts * Engineering plastics * Production waste * Post-industrial recycling The GS 400/600 stands for precise shredding, high throughput, and long service life – the ideal solution for modern plastic processors and recycling companies.

Year of construction: 2005, condition: good (used), Finnish-made, automatic film wrapping machine with infeed and outfeed conveyors, and strapping for securing the package to a wooden pallet. Dkodpfxoy Uagms Aa Hst

Condition: used, Year of construction: 2006, functionality: fully functional, Film cutting machine, robust model FSM L15 Year of manufacture: 2006 Location: Bad Tölz Inspection is welcome. We have other used machines available. Please feel free to contact us. Dksdpjzudzfjfx Aa Hst

Year of construction: 2023, condition: good (used), functionality: fully functional, 2023 Model Tekin Machine Brand 2200 Roller-Type Automatic Winding 80x100 ABA Polyethylene Film Machine, Line A and Line B (including all necessary components and accessories). Dkodpfxszdy Slj Aa Hst It is currently installed and can be inspected in Kartal / Istanbul.

Condition: used, This listing is for Stratec Gemini 6280 Compact Microplate Processor The unit is in full working condition and ready for immediate use The Stratec Gemini 6280 is a fully automated microplate processor optimized for low to mid-throughput ELISA assays. It seamlessly integrates sample pipetting, incubation, washing, and photometric reading into a space-saving, walk-away platform. Equipped with barcode tracking and intuitive software, it ensures exceptional process safety and reproducible results for clinical and research laboratories Transparency Report and Technical Audit: • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Dkedszavi Tepfx Aa Het Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform full diagnostic assay validation • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original)

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Manufacturer: WEILEDER Model: WTK -40/55 PT Category: Packaging machine Year of manufacture: 2018 Location: Ex site Availability: Short-term Operational condition: Dismantled/in storage Technical Data Passage width: 400 mm Passage height: 200 mm Workpiece length max.: 550 mm Film width max.: 600 mm Number of rollers bottom: 1 Total units: 1 Longitudinal units: 1 Magazine slots: 1 Packaging stations: 1 Conveyor technology: Stepless feed Shrink film: Longitudinal film station Discharge: Automatic version Mobile device closure Sealing units Conformity marking: CE marking Dsdpfeyatgcex Aa Hekt Total connected load: 9 kW Space requirement length: 2.57 m Space requirement width: 0.87 m Space requirement height: 1.6 m

Condition: used, Used Pfaudler Balfour approximately 4.64 m2 stainless steel wiped film evaporator. Evaporator body approximately 700mm diameter X 2100mm straight side. Internal 1460 litre capacity rated full vacuum/1 bar design pressure at 0-160 °C. Jacket 250 litre capacity rated full vacuum/6 bar (5 bar with full vacuum) design pressure at 0-160 °C. Rotor belt driven by 5.5 kw 415 volt 3/50 1440 rpm motor via Flender model ZF80A gearbox rated 10.29/1 reduction ratio. Djdpeyh Na Esfx Aa Hjkt

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, color channels: CMYK, number of print heads: 2, We are offering this used Mimaki TxF300-75 DTF roll-to-roll printing machine and the accompanying Adkins dryer with powdering unit. Year of manufacture: 2024 Condition: Ready for use / currently still in operation. Otherwise, please see the photos. We also have other machines of the same design available. If you have any questions or require further information, please do not hesitate to send us a message or call us. Dkjdpfxozn Iqqo Aa Het

Year of construction: 2017, condition: used, functionality: unexamined, Leased vehicle returned Dksdpfxszwck Ds Aa Het Approximate transport dimensions: 50x175x96 cm, approx. 30 kg Serial number: 41049060917 Stock ID: 13500329

Condition: excellent (used), Year of construction: 1998, Linotype Herkuless film imagesetter with Glunz + Jensen 860, online film processor Dkjdpfxjym Damj Aa Het -Bridge -Delta Tower -RIP software installed on PC -with spare parts package. Fully operational and ready for use.

Condition: used, This listing is for Maxwell 16 Promega Magnetic Particle Processor MX3031 The unit is in full working condition and ready for immediate use Automated magnetic particle processor designed for efficient, hands-free extraction of nucleic acids and proteins. Processes up to 16 samples simultaneously using pre-filled reagent cartridges to ensure consistent yields and high-purity results for downstream laboratory applications. [[1]()] Transparency Report and Technical Audit: Dsdpfszgf Spox Aa Hekt Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Year of construction: 2025, operating hours: 20 h, condition: like new (used), functionality: fully functional, Automatic Horizontal Flow / Pillow Packing Machine – Transparent Packaging Film Included – Excellent Condition The machine was purchased new in late 2025 from Anhui Dixin Machinery Technology Co., Ltd. specifically for our premium protein bar production operation. It has had very limited commercial use, is fully functional and in excellent condition. As a horizontal flow/pillow packing machine, it may also be suitable for: Protein bars, Energy and nutrition bars, Chocolate and confectionery, Snack bars, Biscuits and cookies, Bakery products, Other regularly shaped solid food products. The transparent film is included in the advertised price at no additional charge. Djdpfozy Abnox Aa Hskt Condition - Purchased new in late 2025, Very limited commercial use, Used in our dedicated food-production facility, Clean and well maintained, Fully functional, Excellent overall condition. Inspection & demonstration The machine is currently located in Wimbledon, London, United Kingdom. Available immediately. Inspection and demonstration can be arranged in London. We are selling also selling other equipment from our complete premium protein-bar production facility, including: Chocolate enrober with 30kg chocolate tank & 2.7m refrigerated cooling tunnel Protein/energy bar extruder and pneumatic cutter 60L Commercial chocolate melanger/refiner Commercial planetary mixer Stainless-steel production tables, sinks, racks and other food-production equipment Machines are available individually, or we can discuss a package price for multiple machines / a wider protein-bar production setup. Delivery: EXW Wimbledon, London, UK. Collection, loading, transport and installation are to be arranged by the buyer unless otherwise agreed.

Condition: used, Year of construction: 2010, operating hours: 50 h, functionality: fully functional, Slitter for cutting strips of 6 x 25 mm. For films and paper. Dkodpfx Aezn N N Uea Hot