MTM SKR 800 automatic tank cleaning system Parts cleaning system
MTM SKR 800 spray circular chamber cleaning system
They are suitable for large-area parts with simple geometry as well as for smaller workpieces such as camshafts, gearshift wheels and axle drive wheels.
The parts to be washed are conveyed on a circular path through a closed tunnel in which the sectional treatment stations of the parts cleaning system are located. The simultaneous activity of several process steps with short cyc...
Description: The automatic system was last used for cleaning and drying of spectacle lenses. The washing frames with the cleaning material are manually placed on the loading belt. The ultrasonic cleaning system is designed for a batch weight of max. 15 kg. The plant is completely encapsulated. The plant frame is made of stainless steel. Cladding made of stainless steel 1.4301 in the lower plant area, sliding doors made of safety glass in the upper area. The installation consists of 4 elements wi...
Model MAS-30-2
working dimensions WHT 1200 x 1800 x 300
Electric drive
Rated power 21 kW
Rated power 380 V
frequency 50-60 Hz
Number of nozzles 250 pcs.
pump 1200 L/min
Fvgycdyvm
Mixing of detergents not possible - separate nozzles
Nozzles type Chemically neutral
Working temperature 20 - 60° C
Number of cleaning phases 2
Filling quantity ~1200L
Filtration YES
Manufacturer warranty 12 months
Injector - steel cabin TR-70-DK with stepless rotating basket unit and
Fsj92ahue
4 blasting guns TR 60 with
boron carbide nozzles Ø 8 mm
Hand holes closed
WAGNER - bag filter 3.0 kW 3000 m ³/h automatic cleaning - ES-TTM 3000
Multi Pocket filter with motor cleaning
W3za0
Technical data:
-Air power: 3,000 m ³/h
-Total pressure: 210 daPa
-Engine capacity: 3,000 kW
-Suction connection ø: 200 mm
-Filter area: 28.8 m²
-Dust-collecting box: approx. 60 litres
-Length: 710 mm
-Width: approx. 1,095 mm
-Height: approx. 2,800 mm
Ultrasonic cleaning machine with automatic basket transfer mechanism.
Operation Principle : Automatic transfer mechanism, transfer the basket between tanks. Machine has 6 station, 2 for washing, 2 for rinsing , 1 drying and 1 vakuum drying.
Machine body is fully jacketed and operation can be observed via the glass panel.
Tanks dimensions : 275 x 420 x 260 (mm)
Basket dimensions : 180 x 280 x 150 (mm)
Besj8jlxbf
Machine external dimensions : 1285 x 3465 x 2150 (mm)
Ideal for dental implant ma...
Description: The 6-station cleaning machine was part of a machining process for spectacle lenses and took over the necessary cleaning of the transport containers as an intermediate process,
The cleaning process was fully automatic from the feeding station to the removal station. This function (station 1 and 6) can no longer be operated because the conveyor belt of the system is no longer available. In the previous application, spectacle lenses were transported through the system in transport box...
- Demonstration machine from 01/2021 completely made of
stainless
steel including Washing pump
- Automatic basket drive
- Touch button for turning the basket outside the Cleaning
procedure
- Tank cover and sieve filter under the basket stainless steel
- Protection against dry running
- Door security switch
- Connections for plate phase separator (oil separator)
- Inner basket width 1180 mm
- Usable height of the basket to the lower edge of the nozzle holder
675 mm
- Flat jet nozzles...
6
Warranty in months: 12
Manufacturer: SOMMER automatic
Case: Slight traces of storage
Item condition: New from stock
I3gi0bj
Item number: SF 74 MD4
ALB-02 Combo 160 / YIKE-15 UL
Bending machine with double-sided cutting system for aluminium and stainless steel strips with thickness 0,3-1,0 mm and maximum height 160 mm. This model is also used for iron and zinc strips. HD - 02 HYBRID 160 also bends DFT, TGP, RCP, SUPER LETTERS profiles (according to the manufacturer).
Dvjqzyj
straightening unit
sheet width (max) 350 mm
sheet thickness (max) 10 mm
number of levelling rolls 5
diameter of levelling rolls 100 mm
distance of levelling rolls 77.5 mm
feeding rolls 2 x 2 pc.
with loop control
coil cradle
sheet width (max) 330 mm
max. outer diameter of coil 1300 mm
length appr.: 4900 mm
Q9shwhb7
width appr.: 1820 mm
height appr.: 2030 mm
weight appr.: 2500 kg
strip width: 100 mm
strip thickness: 0,4 - 3 mm
No. of levelling rolls top/bottom: 4/3
No. of pinch rolls: 2
Byslqpfk
Ferro Dec 56 Decoating Medium.
For sale due to outsourcing of coating to a third party supplier.
Total 50 canisters á 10 kg each = 500 kg.
Price EUR 5,00 per kg.
ex works, incl. packing
Buex83cpar
from stock.
LCT bio. X A 100 Biologically based small parts cleaner including 80 liters LCT Bio Liquid cleaning fluid
Bag filter
Nvl9j
Magnet for separating metal chips
Washable prefilter
Cleaning temperature is a comfortable 41 ° C
Environmentally friendly
Long service life of the cleaner
little space required
additional options are possible:
Filter housing with washable nylon filter
Insert sheet made of V2A to protect the plastic surface
Trolley
cover
6
Warranty in months: 12
Function: Tested
Item condition: New from stock
Pvvojy
Case: Very good, no scratches
Item Number: SF50-180ND4
PRESS FARELL 150 TN FOR WOOL ... THIS PRESS MAKE SPECIAL MESURES BALES FOR EXPORT IN FCL... BALE MESURES 1170 X 720 X 1150MM WEIGHT BETWEEN 300/350 KG EACH IN CLEAN WOOL DEPENDS ON KIND OF WOL , HIGH PRODUCTION 900/1000 KG HOUR, WITH HIS OWN STORAGE FILTRED MATERIAL, FILTRET ACROSS A CONDENSER SPECIAL WHO DEDUST THE MATERIAL BEFORE GOES TO STAORAGE PRESS PLACE, AND WITH TRUTZSCHSLER AUTOMATIC FILTER FOR THE AIR ABSORBED BY THE CONDENSER.... REALLY GOOD AUTOMATIC INSTALLATION.
Bpoh98xw
Kap Saw Reinchardt NC 700 automatic
Manufacturer Reinchardt
Model / machine type NC 700
Year of production 1998
Machine category Kapła Kapowa
Location
Gorzów Wlkp.
Conditions of delivery
OWN RECEIPT
H8uf7cg
Cost of delivery
Customer cover
Start type
to be agreed
Description
Comments
CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1MM, NEW CONTROLLER, SAW BLADDER BY HYDRAULIC AGREEMENT
strip width: 100 mm
strip thickness: 0,4 - 3 mm
Bs3vomstne
No. of levelling rolls top/bottom: 4/3
No. of pinch rolls: 2
We sell an LCT bio.X C 500 washbasin with a stainless steel structure for washing heavy parts up to 1500 KG, which can easily be washed or rinsed on the frame using a washing brush.
The price includes 100 liters of LCT Bio Liquid for washing at an optimal 41 ° C.
Equipment of the washbasin:
Drain cock
Side filter set with washable filters
Round perforated sheet in the washing area can be removed
Filter sieve in the drain also for washing out
Circuit board for time control of the pump and weekend...
- New machine made entirely of stainless steel including washing pump
- Automatic basket drive
- Touch button to turn the basket outside of the cleaning procedure
- Tank cover and mesh filter under the stainless steel basket
- Protection against dry running
- Door security switch
Izfjft9
- Connections for plate phase separator (oil separator)
- Inner basket width 790 mm
- Usable height of the basket to the lower edge of the nozzle holder
430 mm
- Flat jet nozzles
- washing pressure 3 bar
- in...
Siat fully automatic carton sealer / box taper,
model SR4-S,
Bwk8qusekx
year 2007,
with optional 1 mtr gravity roller conveyor.
Burkle DBM 1400
Newqvdvax
Panel Cleaning Brush
1998
CE
CK International c horizontal semi-automatic paper compactor (2018)
Pbi0qlk3
Reconditioned Alpha-Doc Automatic Punch inclusive of 3:1 & 2:1 Wire Punch Dies
The JBI Alpha-Doc is an automated punching solution for mid to high volumes. This machine is in good condition. It has just been serviced by JBI trained engineers and is inclusive of a 3:1 & 2:1 Pitch wire punching dies.
The JBI Alpha-Doc combines versatility and ease with the production requirements of an on-demand automatic punch. Simply load the reception tray, press start and walk away.
The Alpha-Doc will pun...
Automatic drill, drill press, drill press, stand drill, pillar drill
-Automatic drilling machine with rotary indexing table for drilling flange and others
-spindle taper: MK4
-Transmission:
-Automatic drill with: rapid traverse
-Automatic drilling
-Threading: automatic
-Table size: Ø 700 mm
-Projection: 450 mm
-Spindle stroke: 600 mm
-Speed: 55 - 1235 rpm
-Feed: stepless
-Drive: 2.2/3.5 kW
-Dimensions: 2280/1780/H3000 mm
-Weight: kg
Y2l98l
number of spindles:6
spindle passage:20 mm
Cam controlled multi spindle automatic lathe, used
6 main spindles,
control: Siemens S5 PLC, electronical trip dog control type ?Balluff?
gear box for thread milling (2 pieces)
pick up for rear machining in pos. 6, work piece sorting shute,
coolant pump,
threading clutches, stock stand and reel,
Bk7zpz0mkj
tooling: could be different like pictures
partly revised inclusive new spindle bearings of the main spindles
interface for IEMCA bar loader
o...
Spiral-Matic Automatic Ham Slicer,
model A6510,
I2ycwbcvw
all stainless steel,
year 2019,
quantity 3 available.
To manufacture round rods, dowels etc
Minimum dia 5mm
Maximum dia 65mm
Minimum length 350mm
Feed speeds 2 - 18m/min
Main motor 5.5kw
Feed motor 0.75kw
Weight approx 700kg
Air suction speed 30m/sec
Suction capacity 2000m3/hr
Fitted with
DV65 tool with 4 knives for diameters from 15mm - 65mm
Note - adjustable dia tool cannot process bent pieces
Curently set up for 45mm dia dowels. For other diameters sets of 4 outfeed rollers will be required.
U3uyfowt
Year - 2005 CE Compliant
Condition - Ver...
Technical data baler
Manufacturer Bollegraaf
Typ HBK 25
Year of construction 1987 / 1996 completely overhauled at the Bollegraaf factory
Press power 25 tons
Feed channel 1,050 x 800 mm (l x w)
Theoretic throughput rate 160 m³/hour
Bale size 900 x 800 mm (w x h)
Driving motor 18,5 kW
Tying system 4-fold horizontal, fully automatic
Transport dimensions only baler 6,400 x 2,000 x 2,500 mm (l x w x h)
Machine weight baler 7,5 tons
Condition of the baler:
The press is in a good condition, works per...
electric rotating basket ja
oil skimmers ja
wash-rinse in a closed tank system ja
Wash-rinse in a closed tank system ja
steam vapor extraction ja
folding door ja
timer ja
Bgyduzeyqh
dimensions basket 1.000 x 1.000 x 1.300 mm
capacity 1 t
dimensions of the machine ca. 2.500 x 2.600 x 2.750 m
Big baler, channel baler, garbage press, baler, paper press,
-Main drive power: 90 kW 30 kW
-Pressing force: 88 t
-fully automatic pressing
-fully automatic wire strapping
-Bale / duct cross-section: W x H 1,100 x 750 mm
-Bale length adjustable in 4 steps: 600 - 1,200 mm
-Bale weight at 1,200 mm length: approx. 500 - 800 kg
-cycle time: approx. 9.8 sec
-Throughput depending on density: 5.50 to 16.50 t / h
-Material types: PE film, PET bottles, cardboard, textiles, garbage
-Installati...
number of spindles 6
Jfdaavh
bar capacity 32 mm
Spindle spped 6.300 UpM
Control Siemens - Sinumerik 840D
Multi-spindle lathe INDEX MS 32 C
The machine has worked machine in 1 to 2 shifts.
Bar loader: IEMCA SIR MS32 / 43 / F (4 meter magazine)
- Siemens SINUMERIK 840D with 16 free input / output
- Single NCU
- Artis tool monitoring
The machine has one C axis / transmit function each on the 6 main spindles
(Cylindrical path milling on lateral surface)
3 electrical preparations for auxiliar...
This listing is for a Cryonomic Cab 52 Dry Ice Blasting Machine .
It has not been tested but was working prior to factory closure .
Media used 3mm
Noise level 110 dB
Supply operation Electrical
Air supply pipe size 3/4 – 1″
Electrical
Hose configuration Double hose
Air quality Dry and oil free
Control Panel On/off switch
Pellet feed Adjustable
20 – 105kg/hr
Operation Trigger Operated
Type of wheel rear Medium
Type of wheel front Small castor
Dimensions L x W x H (mm) 860 x 400 x 560
Bu2xcx30hg
W...
Provisional specification [ to be confirmed on arrival ]
Suitable for straight and slightly curved work pieces
Bwkat9ty8n
Min / max work piece diameter 10 - 80 mm
Min work piece length 600 mm
Feed speeds variable, approx. 3,5 - 17 m/min
Sanding belt dimensions 2150 x 40 mm
Sanding belt speed 20 m/sec
Weight: approx. 700 kg
Year - 2005 CE
saw blade diameter 275 mm
cutting diameter 90 mm
Benrtq088a
capacity 45 degrees: flat 150 x 100 mm
mitter cutting - all-position 45 °
cutting speed 16/32 m/min
Filstra
suction capacity 600 cbm/h; 2.500 PA
1,25 t Traglast
3 x
Ovg7uxw
1.200 x 1x200 x 2.200 mm
total power requirement 40 kW
weight of the machine ca. 4 t
dimensions of the machine ca. 8.000 x 6.000 x 6.000 mm
Corner cleaning machine, corner cleaning machine
-Tension: pneumatic
-Scraper: 2
Gltj2pd
-Mill: 2
pressure 60 t
no. of strokes 80 - 400 Hub/min
sheet width 150 mm
Ch2cijbc
table-size 700 x 530 mm
dimension of ram 700 x 430 mm
distance table - lower edge of ram 350 mm
ram stroke - adjustable min/max 20 - 80 mm
feed length 5 - 150 mm
total power requirement 15 kW
weight of the machine ca. 9 t
dimensions of the machine ca. m
- with band-feeding unit
- 2 connecting rods
- adjustable stroke
- strip decoiler
- noise absorbing cabine
ROBOPAC MASTERWRAP HD PLUS XL PGS
semi-automatic winding machine
with arm wrapper for stabilizing unstable and heavy loads
Mwv3obe
- conversion kit for pallet height h = 2.400 mm
- spool carriage device for 76 mm
- extra set of gears for film pre-stretching 250%
- stop positioning pallet in longitudinal direction
- collision protection outside the rotary arm wrapper
* without counter-weight
spindle passage 22 mm
bar feed max. 64 mm
max. bar length 3.000 mm
Main spindle:
turning speed range 23 - 4.457 min/-1
power capacity - main spindel 4,0 kW
supports:
number of cross-slides 3
0 35 mm
turret head:
number of toolpositions 6 pos.
0 60 mm
threading cutting device:
thread dia. M14 / M18 mm
total power requirement 8,0 kW
weight of the machine ca. 1,5 t
dimensions of the machine ca. 6,0 x 2,0 x 2,0 m
Bgnmf9sady
bar feeder interface
bar feeder Iemca Boss
Single-Spindle-Bar...
also ultrasonic basin URT At
basket dimensions 470 x 250 mm
2roflm
weight of the machine ca. 400 kg
Pillar drill, stand drill, stand drill
-spindle taper: MK3
Tix8ar9w0
-Table size: Ø 300 x 300 mm
-Projection: 245 mm
-Columns: Ø 110 mm
-Spindle stroke: 115 mm
-Feed: 0.1/0.15/0.2 mm/rev
-Speed: 80-1000 rpm
-Drive: 1.2 kW 700/1400 rpm
-Dimensions: 800/450/H1750 mm
-Weight: 260 kg
Length of the cut - 3000 mm
Width of the cut - 1900 mm and 2950 mm
Fence 750 mm
Auto cut set for cutting backward and forward
One sided blade
Double sided blade
Cut thickness 1mm - 850mm
Speed control for rotation of blade
Variable speed control for cutting the length
Blade Size: 9745.20.0.5.18TPI
Zthyl0f7
Ref. -No.: 10173
Brand: JAESPA
Storage location: Halberstadt
Country of origin: Deutschland
Saw diameter: 300 mm
Further information:
Ø 300
Bw90cu2eww
Video:
?v=p0qlQZ2kG0E
