Used Conveyor Cleaning System for sale (48,850)

Condition: excellent (used), Converging Solutions converging conveyor Model: High Speed Variable speed control Serial number: 5054 Year of construction: 2002 240 V, 1 Ph, 50 Hz, 16 A Belt width: 625 mm and (3x) 135 mm Lsdpfx Asv Tz Tmebyoah Total dimensions: 1460 mm x 1000 mm x 1140 mm.

Year of construction: 2020, operating hours: 12,542 h, condition: used, 1. Continuous cleaning system, manufacturer: PERO AG, year of manufacture: 2020, mains connection: 400V, 50Hz, rated current 241A, system for cleaning various stamped parts, machine consists of various rinsing tanks, nozzles, and conveyor belts, various rinsing baths and nozzles for degreasing, and conveyor belts for transfer, 3 motors, manufacturer: Dietz, 1.7kW, 1 motor, manufacturer: Dietz, 1kW, 3 motors, manufacturer: Lowara, 3-3.28 kW, 1 motor, manufacturer: SEW, 0.37 kW, 2 motors, manufacturer: Elektror, 4 kW, 2 motors, manufacturer: Küenle, 0.55 kW, machine hours: 12,542, average utilization: 85%, last documented maintenance: 02/12/2025, system generally operational, follow-up work has been carried out. Lodpfxo Aa Agbo Abysah

Condition: used, Hinst Continuous Cleaning System, Parts Cleaning System, 3.80 x 4.30 x 3.80m Continuous washing systems from the manufacturer Hinst are designed to process large quantities of series parts while meeting the highest cleanliness requirements. 1. Loading and Transport The parts to be cleaned are placed either directly or in special grid baskets (the system has matching baskets in the size 48.5 x 48.5 cm) on a transport system. Via an integrated roller conveyor or a modular belt conveyor, the parts are automatically fed into the cleaning tunnel. 2. The Cleaning Process in the Tunnel As the parts pass through the system, they go through various separate treatment zones in sequence: - Washing & Degreasing: The components are sprayed all around with a hot cleaning solution (consisting of water and special industrial cleaners) using an intensive nozzle system (spray bar) to remove oils, greases, and chips. - Rinsing: In the next zone, the cleaner residues are rinsed off with clear water. Ljdpfjg Ipp Asx Abyjah - Drying: At the end of the tunnel, a hot air blower or a blowing zone ensures that the parts emerge completely dry and clean at the other end of the machine. 3. Circulation System in the Base Large liquid tanks and pumps are located below the transport level. The wastewater flowing down is cleaned via filter systems (to collect chips and dirt) and oil separators and then pumped directly back into the cycle to conserve resources. This tunnel design (the system measures a proud 3.80 x 4.30 x 3.80 meters when assembled) guarantees a strict separation between the "dirty side" (inlet) and the "clean side" (outlet), which enables a fast cycle time in seconds directly in a production line. System No. 04.333 Year of manufacture: 12/2004 Dimensions approx. W x D x H: 3.80 x 4.30 x 3.80 m including: - 6 baskets: basket dimensions: 48.5 x 48.5 x H26 cm - roller conveyor 2.10 x 52 x 90 cm The continuous cleaning system has already been professionally disassembled and stored, with a value of €3,500. This is included in the purchase price. You can find more items - new and used - in our shop! International shipping costs on request!

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 20681, The Semmelroth S 50229/2 is a fully automatic, industrial continuous cleaning system in a timed linear design. It was specifically developed for the demanding cleaning of parts and surface preparation of aluminum and cast parts in industrial multi-shift operations. The system is completely made of stainless steel to ensure maximum corrosion resistance and durability when using aqueous cleaning media. System and Conveyor Technology - Transport system: Integrated, automated carrier circulation system. - Process coupling: Designed for timed linear systems for seamless integration into linked production and robotic cells. - Carriers: Customer-specific carrier design for precise and repeatable component placement during the process. Zone Layout and Process Steps The system goes through a five-stage process chain to meet the highest requirements for particulate and film-like surface cleanliness: - HD cleaning zone (high pressure): Mechanical pre-cleaning using high-pressure nozzles for targeted removal of chips, machining residues, and stubborn contaminants. - Cleaning zone (washing): Aqueous main cleaning (spraying/flooding) for chemical degreasing and removal of dirt from the surface. - Rinsing zone: Downstream rinsing stage for residue-free removal of cleaning agent components from the component surfaces. - Drying zone: Highly efficient blowing and drying unit for complete removal of residual moisture (prevents staining and corrosion). - Cooling zone: Targeted component cooling at the end of the process to thermally stabilize the parts for subsequent processes (e.g., metrology, testing, or packaging). Ljdezzpb Repfx Abyoah Media preparation, filtration, and peripherals To ensure long bath life and consistent cleaning quality, the system is equipped with extensive peripheral technology: - Filtration: Three separate filtration stages (each designed for up to 10 bar) for the cleaning, rinsing, and high-pressure zones. - Filter monitoring: Dual differential pressure measurement for automatic detection of the filter saturation level. Oil separation: 1x highly efficient oil separator (Type ÖT 60) for continuous removal of foreign oils from the washing bath. - Exhaust air management: 1x air-cooled condenser (Type RL 150) for condensation and extraction of process fumes (reduces humidity at the installation site). - Fluid management: Integrated wastewater piping for cleaning and rinsing tanks, including a robust 1" wastewater pump for emptying. Safety and System Monitoring - Process control: Two integrated viewing windows with splash-proof interior lighting for optical monitoring of the cleaning process during operation. - Environmental protection / emergency protection: Robust drip tray under the entire system, equipped with a leak detection probe for automatic shutdown in the event of media loss. Technical Performance Data - Manufacturer: Semmelroth Anlagentechnik - Model: S 50229/2 - Total connected load: approx. 110 kW - Material: Stainless steel (V2A / V4A)

Condition: used, Year of construction: 2019, operating hours: 100 h, heating capacity: 12 kW (16.32 HP), total width: 700 mm, total length: 1,300 mm, total height: 600 mm, overall weight: 500 kg, Cleaning System Manufacturer: MFP - FTW Type: Conditioning tank - Size 2 Year of manufacture: 2019 Technical data: - Heating capacity: 12 kW - Temperature range: 30 - 90 °C - Dimensions (length/width/height): 1,300 x 700 x 600 mm - Max. load weight (mesh box): 800 kg Ledpfx Abjzbvhfsyoah - Operating hours: approx. 100 h - Overall dimensions: L x W x H 1.5 x 1.5 x 1.5 m - Weight: 500 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Assembly machine / production line The device was previously used to assemble and press together upper and lower parts. Ledpfxeglp Uyj Abyoah Components include: - Kuka Scara KRC2sr robot, manufactured in 2010 - Pneumatic control system - Electrical control system with frequency inverter - 4 conveyor belts Description of robot type KR 5 scara R350: Working space volume KR 5 scara R550-Z320: 0.264 m3 Repeatability (ISO 9283) KR 5 scara R350: ±0.015 mm Reference point of working space: intersection of axes 3 and 4 Weight approx. 20 kg Robot data sheet Control system data sheet You can find more new and used items in our shop! International shipping costs available upon request! Item condition: used

Condition: good (used), Year of construction: 2018, Approx. 600m conveyor system, packing line, SSI Schäfer – used Price ex works (net): only €99,500, disassembled, packaged, and loaded! Ljdezpf Nyopfx Abyoah Manufacturer: SSI Schäfer Year of manufacture: 2018 Type: Conveyor system Many short sections/elements Roller width mainly 70cm, element width approx. 78cm Motorized roller conveyor Belt pusher Belt conveyor Incl. curved belt conveyor from Transnorm Curve/wedge merge (roller conveyor curves) Tapered roller curve Roller switch Back-up roller conveyor Folding elements/passages Etc. Ground floor, 6 roller conveyors for goods in and out with conveyor belt drive - 1st floor, five roller conveyors to supply 80 workstations with conveyor belt drive - 1st floor, five roller conveyors to remove goods from 80 workstations with conveyor belt drive - 1st floor, used cardboard belt conveyor for removing cardboard boxes with conveyor belt drive Incl. various belt conveyor curves from Transnorm Used cardboard box sizes (L x W x H): max. 800x600x320mm, min.: 340x120x119mm, max. weight 32kg, min. 1kg The offered price includes control cabinet, control system, light barriers, transitions, etc. Not included in the price (but can be purchased for an extra charge): the 80 packing tables, 2 spirals. Condition: good Available: from approx. August 2026, or by arrangement Location: Erfurt area

Condition: used, Year of construction: 2016, Conveyor system for bulk solids Lajdez R Auujpfx Abyoh Bulk solids conveying system using a flexible screw. The system comprises a FLEXICON stainless steel hopper with a pyramidal bottom, support legs and capacitive level sensor. UTFS-S045-010-X tubular conveyor, approximately 2 m long, fitted with a 114 mm diameter UHMW polyethylene outer tube and flat profile flexible internal screw. Discharge head with DRP-02214T-05-X geared motor. The drive incorporates a 2.2 kW three phase motor operating at 1,425 rpm and 50 Hz, with IP55 protection. The system is ATEX II 3D T125 certified, suitable for operation in Zone 22 environments containing combustible dust. Designed for conveying pellets, plastic granules, powders and other solid products with minimal segregation of blended materials.

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, For sale is our Fisa 3-chamber cleaning system for aluminum die-casting tools. The sale includes the associated ABUS crane, as shown in the picture. Plus, there are 2 full containers of cleaning agent. Lodpfx Aboz Rpnneysah

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: Fabr. / Serien Nr. Co2122, operating hours: 6,250 h, total length: 7,500 mm, total width: 2,500 mm, total height: 4,000 mm, overall weight: 6,000 kg, Equipment: cooling unit, Manufacturer: Laborex Cleaning Technology Mfg. / Serial No. Co2122 Cleaning system with 3 chambers, including pre-cleaning and post-cleaning. The system is completely insulated with stainless steel. Lasdpfjzi E S Uex Abyoh

Condition: used, Stratasys Stratasys Fortus 450mc Industrial 3D Printer + Krumm Tec CLEAN MATIC 3150 + Transformer – Complete System Description: The Stratasys Fortus 450mc is an industrial, high-end 3D printer from the FDM series (Fused Deposition Modeling). It is used worldwide in prototype manufacturing, small-batch production, mechanical engineering, the automotive industry, medical technology, and aerospace. For sale is a complete industrial 3D printing system consisting of: Stratasys Fortus 450mc (3D Production System) Lodpfx Abozixy Seyoah Krumm Tec CLEAN MATIC 3150 cleaning system for support material Badger Magnetics 8 kVA transformer (suitable for EU power grids) The system comes from a professional application and was used for the production of high-quality functional parts and prototypes. Key features of the Fortus 450mc: Industrial FDM 3D printer with a large build volume: 406 × 355 × 406 mm Prints high-strength materials such as ABS-M30, PC, ASA, Nylon, ULTEM* Very high dimensional accuracy and repeatability Network-enabled, touchscreen, easy operation Ideal for prototyping, production of small series, tooling, jigs and fixtures (*depending on material licenses) Technical data Fortus 450mc Voltage: 120/208 V, 3-phase (transformer for EU operation included) Current consumption: 18 A Dimensions approx.: 127 × 91 × 196 cm Software version according to display: 6.2.6624.0 Krumm Tec CLEAN MATIC 3150 Model: CM 3150 US/PS 4 kW, 400 V, 50 Hz, 16 A Ideal for removing SR-30 / SUP706 support material Weight: 140 kg Weight approx.: 600–700 kg Important note: “The table shown in the photos is not part of the sale.” Scope of delivery Stratasys Fortus 450mc Krumm Tec CLEAN MATIC 3150 cleaning system Badger Magnetics 8 kVA transformer (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Bous Waschfix Cleaning and Degreasing System For sale is a professional, industrial parts cleaning system/washing machine of the "Waschfix" type. This system is ideally suited for workshops, production facilities, or metalworking companies for the thorough cleaning, degreasing, and maintenance of components and workpieces. Lasdsz Rm U Sjpfx Abyjh The system is robustly built and features an external, high-quality pump and stainless steel filter unit for cleaning the washing medium, as well as a clear and intuitive control panel. The device cleans highly efficiently using a hot water spray process (up to +70 °C) with environmentally friendly, water-based cleaners (pH value 7–11). Thanks to the integrated two-hand safety operation and the clear control panel, operation is absolutely safe and straightforward. Technical data: Manufacturer: Bous Type: Waschfix Manufacturing number: 18251 / 2001 Capacity (filling volume): 120 liters Permissible cleaning agent: pH value 7 – 11 (neutral to alkaline) Maximum operating temperature: 70 °C (thermostat controlled) Heating power (electric): 6 kW Required compressed air connection: 6 bar (for the blow-off function) Electrical connection: 230 / 400 V | 50 Hz Total power consumption: 16 A Net system weight: approx. 450 kg Special equipment: Includes a sturdy floor collection tray with skids (ideal for easy transport with a pallet truck or forklift). Scope of delivery: Main washing cabinet, control unit, separate pump and filter unit made of stainless steel, collection tray. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More items – new and used – can be found in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Industrial self-cleaning disc filtration system manufactured by CHEMIPOL. The unit was installed as part of a reverse osmosis water treatment plant and was used for water pre-filtration. The system is equipped with eight TW-type disc filter units operating in parallel. Automatic cleaning is controlled by a Siemens PLC with an HMI operator panel. TECHNICAL DATA Manufacturer: CHEMIPOL Model: TW8P2L3 Equipment type: Self-cleaning disc filtration system Number of filter units: 8 Filter type: TW disc filters Configuration: Parallel operation Cleaning system: Automatic self-cleaning Pressure monitoring: Two pressure sensors measuring inlet and outlet pressure Control system: Siemens PLC Operator interface: HMI touchscreen Application: Water treatment and reverse osmosis pre-filtration Lodpfx Aozvlm Esbyjah

Condition: used, Bous Waschfix Industrial Cleaning and Degreasing System This system is ideally suited for workshops, production facilities, mechanical engineering companies, or automotive repair shops for the automatic and thorough cleaning and degreasing of workpieces, machine parts, and tools. The device cleans highly efficiently using a hot water spray process (up to +70 °C) with environmentally friendly, water-based detergents (pH value 7–11). Thanks to the integrated two-hand safety control and the clear control panel, operation is absolutely safe and straightforward. • Integrated fine filter for a longer service life of the cleaning water and cleaner cleaning results. • Integrated drain pump for effortless emptying of the tank during maintenance. • Compressed air blow-out function for subsequent drying of the cleaned components. Technical data Manufacturer: BOUS Cleaning & Degreasing Systems Type / Model: WASCHFIX Year of manufacture: 2006 Tank capacity: 100 liters Operating temperature: up to +70 °C Electrical heating power: 6 kW Compressed air connection: 6 bar (for blow-out function) Electrical connection: 230 / 400 V Total power consumption: 17 A Control voltage: 24 V DC / 50 Hz Net system weight: approx. 500 kg "Everything from a single source: We will gladly offer you suitable bank financing for your project." Lajdpfxjz Nwbme Abysh You can find more new and used items in our shop! International shipping costs upon request!

Year of construction: 2007, operating hours: 8,000 h, condition: ready for operation (used), functionality: fully functional, product height (max.): 80 mm, product length (max.): 80 mm, product width (max.): 80 mm, machine/vehicle number: 26240, This KSN Drum Washer 250 WRD is a used industrial cleaning system designed for reliable and efficient parts cleaning. The drum washing process provides consistent cleaning results while reducing manual handling and can be integrated into existing production lines. Choosing a used KSN cleaning system offers a significantly lower investment compared to a new system, combined with proven technology, fast delivery and the possibility of customization to suit the production requirements. KSN drum washers are designed for many years of operation in industrial environments. Standard equipment: Grundfos pump Laedpfxezy Hd Hj Abyeh Fully insulated construction Automatic level and pressure monitoring Technical details can be found in the attached PDF document.

Condition: used, Year of construction: 2013, ZIPPEL REMA K1 400 3 LB Industrial parts cleaning system (washing system) Year of manufacture: 2013 Washing, rinsing, and drying in a continuous system with a washing basket to remove oils, chips, and dirt from workpieces before further processing or assembly. Approved according to WHG (German Water Resources Act). The system is still connected to power. System description, technical data & plans – see PDF. All technical specifications, illustrations, and content are non-binding and without guarantee. Subject to change and errors. All other accessories visible in the photos are not included in the scope of delivery and are therefore not part of this sale. The scope of delivery only includes the accessories that are explicitly listed here, in the order confirmation, and in the invoice. EXW (Ex Works) D-92729 Weiherhammer Excludes dismantling, removal, and loading. Lodoz I S R Ejpfx Abyeah Delivery time: immediately Subject to prior sale / Payment due immediately upon completion of purchase.

Year of construction: 2022, condition: like new (used), For sale is a professional Mobile CIP (Cleaning In Place) System manufactured by the renowned German brewery equipment manufacturer, Kaspar Schulz. The unit was manufactured in 2022/2023 and has never been used in regular production. It is in excellent, near-new condition. Ideal for: Craft breweries Industrial breweries Distilleries Beverage manufacturers Dairy industry Food processing plants Main Features: 2 × 210 L stainless steel tanks Fully automated WAGO PLC control system WAGO TP600 Touch Panel HMI Siemens SITRANS MAG 5000 electromagnetic flow meter Siemens MAG 1100 F DN40 sensor ProMinent chemical dosing pumps High-quality KPA process pump Lajdozm R Amepfx Abyeh Stainless steel pipework and frame Complete electrical control cabinet Technical Specifications: Manufacturer: Kaspar Schulz (Germany) Year of manufacture: 2022/2023 Tank capacity: 2 × 210 liters Power supply: 3 × 400 V / 50 Hz Current: 19 A Main fuse: 32 A Maximum operating temperature: 80°C Flowmeter: Siemens SITRANS MAG5000 + MAG1100F Control: WAGO PLC + TP600 Touch Panel Condition: The machine has never been used in continuous production. Excellent cosmetic and technical condition. Can be inspected in Wrocław, Poland. Worldwide shipping can be arranged. VAT invoice available. Additional photos, videos, and technical documentation are available upon request.

Condition: used, For sale is a used floor conveyor system from Louis Schierholz GmbH, taken from the oven areas of an industrial wheel painting line. The conveyor technology offered is for the transport of vehicle wheels or aluminum rims. The original design documents from Widmer+Ernst / VGT AG date back to 1998. This date refers to the design status; the actual year of construction of the conveyor system was 1999/2000. A precise model designation is not currently known. Information from the design documents: - Conveyor speed: 1.6 m/min - Primer oven: 59 m conveyor length - Primer drying oven: 40 m conveyor length Laedpfxs Aar Tdj Abyjh - Primer baking oven: 80 m conveyor length - Clear coat baking oven: 64 m conveyor length - Total length of originally documented oven conveyor sections: 243 m The 243 m is a design specification and not a guaranteed delivery quantity. It is not certain whether all rails and components of the original sections are still available. The actual quantity available and the definitive scope of delivery will be determined and agreed upon jointly during an inspection prior to purchase. The system is designed as a floor-mounted rail guidance system with straight and curved sections, as well as vertical workpiece carriers. The offer includes the rail system, the chain and the tool carriage, as well as the tool holder. Control and drive systems are not part of the offer. The exact scope of the available parts will be determined during the inspection prior to purchase. Location: 36381 Schlüchtern. Price upon request.

Condition: used, RSA NC-V 2000 Deburring Machine + Tube Washing System + Coral Filter Complete industrial tube processing and finishing line The system consists of three high-quality industrial components: 1. RSA RASAPLAN NC-V 2000 – High-performance deburring machine Function: Automatically processes workpieces up to a maximum length of 2,000 mm. 2. BOUS (CeBeCo) Rowamat RL 200 – Continuous tube washing system Function: Extremely robust and durable stainless steel welded construction. Accessories: 3. CORAL IperJet DF4 – Cartridge filter extraction system Performance: 4 horizontal high-performance filter cartridges with fully automatic jet-pulse compressed air cleaning (very low maintenance). Function: Reliably extracts brush dust, grinding residue, or fumes from the washing system. The RSA Rasaplan NC-V2000 is a fully automatic, high-performance brush deburring machine specifically designed for the simultaneous internal and external deburring of tube ends and profiles in an industrial continuous process. The number "2000" indicates the maximum workpiece length of 2000 mm, which can be automatically processed in the standard configuration. “Everything from a single source: We would be happy to offer you suitable bank financing for your project.” Ledpfx Aozklb Ejbyjah More new and used items can be found in our shop! International shipping costs upon request!

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 2013-5191, Ultrasonic cleaning system, less than 2 operating hours Lsdsxqnqpjpfx Abysah

Condition: used, EOS / Transitube Powder conveying system / dosing system EOS Transitube DCL 800/30 PM Automatic powder conveying and dosing system for two components For sale is a used powder conveying system from the manufacturer Transitube / tim plast Anlagenbau GmbH. The system is used for the continuous dosing, conveying, and homogenization of powders, ground materials, or granules and is ideally suited for plastics processing, extrusion, and injection molding. Technical data: Manufacturer: transitube / tim plast Anlagenbau GmbH Type: DCL 800/30 PM Designation: EOS powder conveying system Dosing system for 2 components 2 material containers, each approx. 400 liters Continuous dosing and mixing Materials: Powder Granulate Ground material / regranulate Power connection: 3/N/PE 400 V AC Frequency: 50 / 60 Hz Connected load: 2.0 kW Weight: approx. 180 kg Dimensions (approx.): Width: 1850 mm Depth: 900 mm Height: 1320 mm Dosing capacity, model-dependent: approx. 50 to 2,000 kg/h Laodpezn H D Nefx Abyoh Dosing accuracy: ±0.5 to ±2 % Dosing range: 5 to 50 % Additive dosing: 0.2 to 10 % Equipment: 2 dosing containers with hinged lids Automatic control cabinet with touch panel Transitube conveying and mixing system Electrical control Screw dosing Pneumatic components Flowserve Automax actuators Conveying motor with gearbox Various conveying hoses Piping Accessories as shown in the pictures Application areas: Plastics industry Extrusion Injection molding Powder conveying Material dosing Regranulate dosing Mixing systems Production automation Condition: Used Visual condition as shown in the pictures. Scope of delivery as shown in the pictures. Scope of delivery: 1x EOS Transitube DCL 800/30 PM powder conveying system Complete control cabinet Conveying units Motors Pneumatic components Hoses Piping system Accessories as shown in the pictures Important note: The system is sold as shown in the pictures. Please note the scope of delivery in the photos. Tables, tools, or other aids that may be visible in the pictures are not included in the scope of delivery unless explicitly stated. Shipping via freight forwarder is possible. Inspection is possible at any time by appointment. Subject to prior sale and errors. If you have any questions, please do not hesitate to contact us by telephone.

Year of construction: 2017, condition: good (used), functionality: fully functional, For sale is a professional vacuum conveyor unit from KOCH Technik (Type A130). This device is designed for the automatic conveying of plastic granulate or regrind directly to an injection moulding machine or extruder. The unit is distinguished by its extremely robust cast aluminium construction, built for demanding industrial use. Thanks to the quick-release system (clamping ring), the unit can be opened tool-free for cleaning or maintenance purposes. Technical data: Voltage: 24 V DC Type: A130 Year of manufacture: 06/2017 Material connection: Quick coupling (Camlock) Mounting: 4-hole flange plate Container volume: 12 to 15 litres Conveying distance: 10–15 metres, depending on the vacuum pump used Transport and loading can be organised across Europe on request, for an additional charge. Prices quoted are exclusive of VAT. Viewing is possible by appointment. Please contact us; our team will be happy to assist you. Lasdey Iwkiepfx Abyjh Part-exchange or trade-in welcome! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.

Condition: used, Year of construction: 2016, Coolant cleaning system Manufacturer: Zyklomat Type: ZKR 14/350 Year of manufacture: 2016 For cleaning grinding emulsions Supply rate: max. approx. 250 L/min. at approx. 3.5 bar water pressure Overflow to the filter system is provided on site, air- and foam-free. Maximum temperature: 50°C Cleaning capacity: 350 L/min. Recirculation from clean tank to dirty tank: 100-350 L/min. Machine supply: max. 250 L/min. Filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3 Particle separation limit: approx. 5 µm Medium: Emulsion 3-6% Operating temperature: Ambient temperature Solid particle volume: approx. 5.14 m3 Laedpfx Abezwccmoyeh Operating volume max.: approx. 4.58 m3 Operating volume min.: approx. 3.60 m3 Process flow: fully automatic full-flow filtration Sludge discharge: fully automatic, with consistent solid content The dirty liquid is fed via on-site pumping stations. The chips and fine sludge generated during grinding (grinding debris, scale, corundum) are discharged via a scraper conveyor. The sludge is pre-dried in the upper section of the scraper. Filtration takes place via ZYKLOMAT high-performance hydrocyclones. The system operates fully automatically. Maintenance: annual maintenance Availability: 10-2026 Double scraper tank for discharging grinding sludge Type: KR 1.75-5.1 Total volume: approx. 5.14 m3 Maximum volume: approx. 4.58 m3 Length: approx. 4,000 mm, including 70 mm stiffening Width: approx. 1,890 mm, including 140 mm stiffening Height: approx. 1,105 mm, including 100 mm base profile Neck height: approx. 2,300 mm Theoretical maximum discharge volume: 15 kg/h Function: Coolant tank with integrated clean tank, sedimentation and flotation tank with fully automatic sludge discharge. 1 bevel gear motor Voltage 400 V, 50 Hz, IP 54 as scraper drive 3 connection nozzles for return lines from three machines 1 clean liquid tank, integrated at the rear into the scraper tank. Oil-tight welded, with internal circumferential bevel gear, various cover plates (non-walkable plates screwed onto an angle frame), without ladder, without railing, without internal access rungs Maximum volume: approx. 0.55 m3 191026ä

Year of construction: 2005, operating hours: 10,000 h, condition: ready for operation (used), functionality: fully functional, product height (max.): 100 mm, product length (max.): 100 mm, product width (max.): 100 mm, machine/vehicle number: 7614-23, This KSN Drum Washer 350 WRD is a used industrial cleaning system designed for efficient and reliable parts cleaning. The drum washing process provides consistent cleaning results while reducing manual handling and is suitable for integration into existing production lines. Choosing a used KSN cleaning system offers a significantly lower investment compared to a new system, combined with proven technology, fast delivery and the possibility of customization to suit specific production requirements. KSN drum washers are designed for many years of operation in demanding industrial environments. Equipment and features: Grundfos pump Lasdpfx Aszy Hktsbyeh Fully insulated construction Automatic level and pressure monitoring Adjustable drum speed Technical details can be found in the attached PDF document.

Condition: used, Veolia Water System, Model - Orion 2000 Orion™ is a skid-mounted, multi-technology purified water production system. Offering softening, reverse osmosis and continuous electrodeionization (CEDI) technologies that can be fully or partially hot water sanitized. Ideal for use as a pharmaceutical water system for the generation of purified water. Laodpez Ic T Rjfx Abyoh Orion is digitally-enabled to offer the ability to remotely monitor any parameters you want.