Used Automatic Cleaning System for sale (48,992)

Condition: excellent (used), I am offering for sale a professional HBM MGCplus measuring system from Hottinger Baldwin Messtechnik (HBM). This is a high-end, modular measuring amplifier used in research laboratories, industry, and testing stations for signal acquisition and analysis from sensors. The device is equipped with a control panel with an LCD display and installed measuring modules. The unit being sold was removed from an industrial installation. Specifications: • Manufacturer: HBM – Hottinger Baldwin Messtechnik • Model: MGCplus • Control unit: AB22A • Installed modules: ML60B Fgsdpfxezru Rrs Aa Eof BL01 (2 units) AP17 SY03 • Power supply: 115–230 V AC, 50–60 Hz • Maximum power consumption: 300 VA Condition: • Used. • Visual condition as shown in the photos – normal signs of use.

Year of construction: 2012, operating hours: 3,500 h, condition: used, functionality: fully functional, P System fully automated hydraulic pelleting line with patented hydraulic pelleting system. Mono roller, hydraulically operated with a unique load sensing system. Features automatic vegetable oil injection at startup and shutdown. Continuous rated production 350kg/hr (peak 500kg/hr) - Fully automatic, operates without human intervention. In its current setting it worked 12hrs continuously alongside log production, but can operate continuously if required. Line includes the following:- 50m³ moving floor container with hydraulic operated lid. Material level viewing windows, and unloading cross auger. Incline discharge auger with magnetic separator. First stage hammer mill for material up to P16 (G30). Pneumatically conveyed to minisolo. Mini silo distribution hub with hydraulic agitator. Equipped with cyclone and transfer fan. The unit has an additional port covered with a blanking plate to allow addition of another pelleting module. Second stage hammer mill and rotary valve controlled by pelleting module. P300 - 30kW pelleting module with PCL control system. All motors other than the main drive are hydraulic and controlled by the pelleting module. The system has a moisture sensor which injects water into the second stage hammer mill to control pellet quality. Die temperature is monitored by a temperature probe and controlled by compressed air injection. Automatic oiling system on startup and shutdown. 6m Discharge cooling and screening auger. Pellets are conveyed, cooled and screened for dust by hydraulically driven auger. Fgsdpszcf Dljfx Aa Eef Double filter air extraction unit. The line is in good condition and comes with a set of spare parts, dies and rollers. PCL control unit and main drive gearbox were replaced over a year ago. It has been serviced well and can be demonstrated working if required, with your material. Not included in offer, but available by request 4000L pellet hopper made from galvanised steel metal, with pneumatically operated hopper. Semi-automatic bagging plant, 5kg - 30kg capacity. Plastic sack heat sealer. Pellet quality test equipment. 5m Bucket elevator made by Perrys of Oakley.

Condition: good (used), Curved roller conveyor, curved track, curved roller conveyor, curved roller conveyor, curved roller conveyor, roller curve, curved conveyor with drive, roller track, roller curve conveyor, roller track, conveyor track, lightweight roller conveyor -Manufacturer: Soco System, non-driven roller curve conveyor, height-adjustable -Height: max. 710 mm Fjdpfjyw Hwkex Aa Ejgf -Rollers: Ø 48 x 15 mm -Number: 2x roller conveyor available -Price: per piece -Transport dimensions: 1470/600/H510 mm -Weight: 23 kg/pc.

Condition: good (used), Curved roller conveyor, curved track, curved roller conveyor, curved roller conveyor, curved roller conveyor, roller curve, curved conveyor with drive, roller track, roller curve conveyor, roller track, conveyor track -Manufacturer: Soco System, roller curve conveyor with drive, height adjustable -Rollers: Ø 54-80 x 355 mm Fgsdpfx Ajywu Azea Eef -Speed: 14 m/min -Drive: 2x 0.12 kW, see photo of nameplate -Transport dimensions: 1500/600/H840 mm -Weight: 64 kg

Condition: good (used), Year of construction: 2021, Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor Fgsdpfx Asyvrnxsa Ejf -Manufacturer: Soco, conveyor belt, transport belt, belt conveyor from packaging machine -Speed: 21 m/min -Belt width: 380 mm -Conveyor length: 740 mm -Drive: 0.12 kW, see photo of nameplate -Transport dimensions: 780/640/H620 mm -Weight: 36 kg

Year of construction: 1991, condition: good (used), Carton sealer, packaging machine, carton closing machine, carton sealing machine, sealing tape machine, adhesive tape machine -Manufacturer: Soco System, Carton Sealer Type T-10 -Carton width: max. 530 mm -Dimensions: see photos -Overall dimensions: 980/930/H1680 mm -Weight: 135 kg Fgsdpfjlry S Ajx Aa Eof

Condition: used, Carton sealer, packing machine -Carton width: max. 530 mm -Dimensions: 1250/760/H850 mm Fsdpjdnff Ajfx Aa Eegf -Weight: 33 kg

Condition: ready for operation (used), functionality: fully functional, 🔧 Key Features of Gala Underwater Pelletizing Systems • Die-Face Cutter: Utilizes a die-face cutter where molten polymer strands are cut directly at the die face, ensuring uniform pellet sizes tailored to customer specifications. Fgjdpfewm Nq Eex Aa Eef • Centrifugal Dryer: Equipped with a centrifugal dryer that efficiently removes moisture from the pellets, eliminating the need for extended drying times. • Compact Design: The system's design eliminates the requirement for long water tanks, allowing for a more compact footprint and flexible layout in production facilities. • Ease of Operation: Designed for stable and continuous production, the system offers excellent operability, enabling a single operator to manage multiple lines effectively

Condition: used, Automatic Bag Filling Line Bag weights from 5kg to 1000kg Infeed with product de-clumper / product breakup breaker and sieve. Fedpfx Ajyq Tb Ioa Ejgf Incline screw auger to high level hopper and mixer. Delivery system to bag filler where weighing takes place and metal detection before bag filling point. This system comes with a second mobile screw auger for filling 1000kg big bag / sacks Complete with all the controls for the smooth running of this bagging line. After Bagging the bags are sealed with a Saxon Bag Sealer and then stitched with a Singer Bag Stitcher.

Condition: new, Year of construction: 2021, New 4 Head Automatic Capper & Cap Feeder Never Used / New Model RCP-141 To include Capper Feeder & automatic capper machine Fgedpev R I D Hsfx Aa Ejf

Condition: like new (used), Soco Case / Carton Sealer & Packing Station (Like New) Fgedpfxjrza Nco Aa Esf Model T10 With infeed and outfeed gravity conveyors Top and bottom tape heads Top box flap closer facility Adjustable box side guides Box holder on infeed conveyor for packing station use All mobile on castors In excellent working condition, Like new

Condition: excellent (used), Soco Automatic Case Sealer / Box Taper Model T55 For random size boxes Top and bottom tape heads Fodpfx Aehvr Afea Eogf Adjustable height legs Complete with infeed and out feed gravity roller conveyors In excellent condition Delivery / Shipping can be arranged if you require this service

Condition: excellent (used), Soco System Carton / Case Sealer With top and bottom tape heads Fsdpfxjhlp E Aj Aa Ejgf Model: T-100 380 V, 3 Ph Plastic roller belt, roller width: (2x) 300 mm Total dimensions: 1540 mm x 800 mm

Year of construction: 2021, condition: new, Soco Case Sealer, Model T10 Standard Product Specifications • Capacity 30 units/min • Galvanised steel body construction • 50mm high grip side drive belts • Tape width range 32mm 55mm • Top & Bottom tape heads • Manual side drive adjustments Fgedpfx Aegq Nx Uoa Eef • Manual height adjustments • Three phase power supply • Machine dimensions 1170mm L x 740mm W • 50mm tape overlap on box We supply a full range of Soco Equipment and spare parts

Condition: like new (used), RR120 is a high-volume system for printing, coating, inspecting, and drying rolls. Its modular design offers flexibility for specific applications and needs Reel to Reel Handling System 7 Dispensing Channels (Tandem Pumps Bio-Jet, Front Line and Air Jet Dispensing Technologies Print up to 7 Lines Simultaneously Automated Dispense Tracking for Precision Line Placement Perform Multiple Applications on One System Adjustable Tension for Handling Backed/Unbacked Membranes Easy to Set up, Operate and Maintain Fjdpfx Aaeya Hvqs Ejgf Data Storage to Support Multiple Applications Many System Options Can be Upgraded after Purchase

Condition: new, Year of construction: 2026, Power 5.5 kW / 6.6 kW Inverter yes Motor speed 4500 rpm Voltage and frequency: 400V / 50Hz Tank: 200 liters Water resistance: IP23 Noise level: 75 dB Working pressure: 10 bar Air flow: 640 l/min Fjdpfx Aaozr Naue Eogf Suction capacity: 750 l/min Discharge capacity: 640 l/min Drive type: Direct drive Outlet diameter: G 3/4″ Dryer: None Air-to-oil cooler Screw manufacturer: BAOSI Inverter: GD300-01A Display: HTK070 / MAM6070 Dimensions (length/width/height): 1446 × 506 × 1096 mm Packaged dimensions (length/width/height): 1385 × 520 × 1200 mm Weight 180 kg / 200 kg

Condition: new, Year of construction: 2026, Maximum cutting diameter 400 mm Maximum rectangular cross-section 400 × 400 mm Band dimensions 3860 × 34 × 1.1 mm Band speed 27 / 45 / 69 m/min Speed ​​regulation Stepless (3 ranges) Power supply 400 V Main motor power 4 kW Drive type Mechanical transmission + hydraulic system Machine type Automatic band saw Design Column-type Vise Hydraulic Material feed Automatic, hydraulic Control Automatic (battery mode) Feeding accuracy ±0.20 mm Cooling Coolant system (flood) Belt cleaning Wire brush Fgodpszr I T Hofx Aa Eof Machine dimensions (L × W × H) 2400 × 2380 × 1800 mm Net weight 2100 kg Gross weight 2300 kg

Condition: new, Year of construction: 2026, Saw Diameter: 500 mm Fsdpsxdciasfx Aa Eogf Motor Power: 4 kW Cutting Range of the 500 mm Diameter Circular Saw Cutting Capacity 0° (square) for solid material: 170 x 170 mm Cutting Capacity -45° (square) for solid material: 160 x 160 mm Cutting Capacity +45° (square) for solid material: 160 x 160 mm Cutting Angle: -67.5°, -45°, -30°, -22.5°, -15°, 0°, 15°, 22.5°, 30°, 45° Dimensions (without feeders): Width 825 mm x Depth 1074 mm x Height 1397 mm Saw Speed: 3000 rpm Motor: 4 kW, 50 Hz, 400V AC, three-phase (3PPE) power supply Machine weight: 220 kg Cutting disc diameter: 500 mm Cutting disc bore diameter: 32 mm Operating pressure in the pneumatic system: 6–8 bar Cooling system: The machine is equipped with an oil mist system to cool the cutting blade, which increases the tool's durability and performance. Note: A coolant tank is not included and must be installed by the customer.

Condition: new, Year of construction: 2026, Power supply: 400 V Motor power: 5.5 kW Spindle speed: 50 – 1520 rpm Table dimensions: 1700 × 400 mm Maximum table load: 1000 kg Table movement range: 1300 x 400 x 600 mm Maximum table load: 1000 kg Machine type: Console milling machine Design: Heavy Line Application: Metal machining Machine dimensions (L × W × H): 2245 × 2100 × 2000 mm Weight: 3700 kg Fgodezr I Spspfx Aa Esf

Condition: new, Year of construction: 2026, Center distance 1500 mm Center height 210 mm Swing over bed 500 mm Swing over cavity 710 mm Swing over bed slide 300 mm Bed width 405 mm Fgodpozr I H Hofx Aa Esf Spindle bore 82 mm (D8) Spindle taper 90-(1:20) Speed ​​range 9 – 1600 rpm Maximum tool size 25 × 25 mm Longitudinal feed range 0.028 – 6.43 mm Cross feed range 0.012 – 2.73 mm Metric thread 0.5 – 224 mm / 48 ranges Inch thread 56 – 1/4 TPI / 45 ranges Modular thread 0.5 – 112 mm / 42 steps DP 56 thread – 1/4 DP / 45 steps Center diameter 75 mm Center travel 150 mm Tailstock taper MK5 Motor power (S1/S6) 7.5 / 9 kW (10 HP) Pump power (S1/S6) 0.1 / 0.12 kW Machine dimensions (L × W × H) 2700 × 1150 × 1800 mm Weight 2850 kg A larger model is available, 660 x 2000 mm, priced at €14,800 net.

Condition: new, Year of construction: 2026, 3-jaw chuck 200 mm Max. turning diameter over bed 410 mm Turning diameter over cross slide 255 mm Turning diameter in bridge recess 580 mm Center distance 1000 mm Center height 205 mm Top slide travel 140 mm (accurate 0.02 mm) Cross travel 210 mm (accurate 0.02 mm) Longitudinal travel 750 mm (accurate 0.2 mm) Bed width 250 mm Fgedpfx Aaezr I D Se Eof Spindle bore 52 mm Spindle nose D1-6 CAMLOCK Spindle taper MK6 Lathe post dimensions 100 × 100 × 32 mm Max. tool dimensions 20 × 20 mm Spindle speeds: 16 ranges, 45 – 1800 rpm Spindle speed range: 45, 70, 90, 108, 140, 165, 215, 255, 330, 385, 510, 585, 770, 900, 1170, 1800 rpm Metric thread (42) 0.2 – 14 mm/rev Inch thread (42) 2 – 72 TPI Modular thread (18) 0.3 – 3.5 mm D.P. thread (21) 8 – 44 DP Longitudinal feed range (17) 0.05 – 1.7 mm/rev Cross feed range (17) 0.025 – 0.85 mm/rev. Tailstock quill diameter 50 mm Tailstock quill stroke 120 mm (accurate 0.02 mm) Tailstock quill taper MK4 Main motor power 2.2 / 3.3 kW Coolant pump power 90 W Dimensions (L × W × H) 2050 × 900 × 1650 mm Weight 1600 kg A larger model (410 x 1500 mm) is available for €6,800 net.

Condition: new, Year of construction: 2026, Swing over bed 290 mm Swing over cross slide 185 mm Distance between centers 750 mm Fgedpfxozr Iytj Aa Esf Bed width 180 mm Spindle bore 38 mm Spindle taper MT5 Number of spindle speeds 2 Spindle speed range 75–500 / 300–2000 rpm Number of metric threads 18 Metric thread range 0.2–3.5 mm Number of inch threads 21 Inch thread range 8–56 TPI Cross feed range 0.017–0.25 mm/rev Longitudinal feed range 0.07–0.72 mm/rev Tool post type: 4-position quick-change Maximum upper carriage travel: 80 mm Maximum cross carriage travel: 150 mm Maximum longitudinal slide travel: 700 mm Tailstock quill travel: 80 mm Tailstock quill taper: MT3 Main motor power: 2.4 kW Maximum drilling diameter: 20 mm Maximum face mill diameter: 63 mm Maximum end mill diameter: 20 mm Spindle speed: 50–2250 rpm Spindle taper: MT2 Head tilt range: -90° to +90° Head height adjustment: 260 mm Milling head motor power: 750 W Lathe stand/stand included SINO DRO 2 digital position readout Axles KIFES Toolholders Set of 7 turning tools 16 x 16 mm with folding inserts MK3 live center Fixed telescope (included) Movable telescope (included) 4-jaw chuck 160 mm Set of safety guards (CE compliant) Set of change gears (included) Reduction sleeve (included) Maintenance wrenches (included) Oil can (included) Length 1500 mm Width 750 mm Height with stand 1100 mm Weight with stand 360 kg A larger 320 x 1000 VARIO model is available - price €3200 net.

Condition: new, Year of construction: 2026, Automatic grinding thanks to PLC control. Worktable 406 × 813 mm. Magnetic chuck 400 × 800 mm. Maximum table load with magnetic chuck: 500 kg. Servo-driven vertical axis for precise automatic feed. Hydraulic longitudinal table feed. Automatic vertical and cross feed. Worktable speed 7–23 m/min. Grinding wheel dimensions 350 × 40 × 127 mm. Spindle speed 1450 rpm. Spindle motor power 5.5 kW. Total machine power 9 kW. Fgjdpszr H Najfx Aa Ejf Surface roughness up to Ra 0.63 µm. The automatic vertical feed range includes values ​​of 0.005 / 0.01 / 0.02 / 0.03 / 0.04 / 0.05 mm/stroke, allowing you to adjust the operating parameters to the type of material, required accuracy, and desired surface finish. Another model with a larger worktable is available: the SMP40100AHD (406 x 1020 mm) - priced at €26,000.

Condition: new, Year of construction: 2026, Automatic grinding thanks to PLC control. Worktable 250 x 500 mm. Magnetic chuck 250 x 500 mm. Maximum table load with magnetic chuck: 180 kg. Servo-driven vertical axis for precise automatic feed. Hydraulic longitudinal table feed. Automatic vertical and cross feed. Worktable speed 7–23 m/min. Grinding wheel dimensions 200 x 20 x 31.75 mm. Spindle motor power 2.2 kW. Total machine power 3.7 kW. Fedjzr H E Ujpfx Aa Eogf Surface roughness up to Ra 0.63 µm. Includes: coolant system, magnetic separator, hydraulic station, lubrication, magnetic chuck, PLC controller, and touchscreen. The automatic vertical feed range includes values ​​of 0.005 / 0.01 / 0.02 / 0.03 / 0.04 / 0.05 mm/stroke, allowing you to adjust the operating parameters to the type of material, required accuracy, and desired surface finish. Another model with a larger worktable is available: the SMP3063AHD (635 x 305 mm) and costs €22,000.

Condition: new, Year of construction: 2026, Automatic and manual operation – continuous operation or trigger control possible Hydraulic arm drop adjustment – ​​smooth feed control without the risk of overload Cutting angle range: -45° to +60° – quick adjustment without disassembling the material Powerful 1500/1100 W motor (2/4-pole) – high performance even with thick profiles 2 belt speeds: 34 and 68 m/min – adapted to the material type Stable construction – 285 kg – zero vibration, high precision Quick clamp vice – quick material changeover in mass production Pump-based cooling system – extended belt life, improved cutting quality Automatic shut-off after cutting 400 V | 3-phase power supply | 50 Hz Motor power 1500 / 1100 W Belt speed 34 / 68 m/min Belt dimensions 2740 × 27 × 0.9 mm Fjdpfx Aoyi Uq Uea Ejgf Belt pulley diameter 305 mm Cutting angle range 45°L | 30°L | 15°L | 0° | 15°R | 30°R | 45°R | 60°R Coolant pump 45 W Coolant tank capacity 16 l Net weight 285 kg Noise level 68–71 dB