Used Coolant Cleaning System for sale (45,016)

Condition: used, Year of construction: 2016, Coolant cleaning system Manufacturer: Zyklomat Type: ZKR 14/350 Year of manufacture: 2016 For cleaning grinding emulsions Supply rate: max. approximately 250 L/min at approximately 3.5 bar water pressure Overflow to the filter system is provided on-site, air and foam-free. Maximum temperature: 50°C Credezwccmspfx Aqvji Cleaning capacity: 350 L/min Recirculation from the clean tank to the dirty tank: 100-350 L/min Machine supply: max. 250 L/min Filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3 Particle separation limit: approximately 5 µm Medium: Emulsion 3-6% Operating temperature: Ambient temperature Solid particle volume: approximately 5.14 m3 Maximum operating volume: approximately 4.58 m3 Minimum operating volume: approximately 3.60 m3 Process sequence: Fully automatic full-flow filtration Sludge discharge: Fully automatic, with consistent consistency The dirty liquid is fed via on-site pumping stations. The chips and fine sludge generated during grinding (grinding swarf, scale, corundum) are discharged via a scraper conveyor. The sludge is pre-dried in the upper scraper section. Filtration takes place via ZYKLOMAT high-performance hydrocyclones. The system operates fully automatically. Maintenance: annual maintenance Availability: 10-2026 Double scraper tank for discharging grinding sludge Type: KR 1.75-5.1 Total volume: approximately 5.14 m3 Maximum volume: approximately 4.58 m3 Length: approximately 4,000 mm, including 70 mm stiffening Width: approximately 1,890 mm, including 140 mm stiffening Height: approximately 1,105 mm, including 100 mm bottom profile Neck height: approximately 2,300 mm Theoretical maximum discharge volume: 15 kg/h Function: Coolant storage tank with integrated clean tank, sedimentation and flotation tank with fully automatic sludge discharge. 1 bevel gear motor Voltage 400 V, 50 Hz, IP 54 as scraper drive 3 connection nozzles for return lines from three machines 1 clean liquid tank, integrated at the rear into the scraper tank Oil-tight welded, with internal circumferential bevel gear, various cover plates (non-walkable plates screwed onto angle frame), without ladder, without railing, without internal access rungs Maximum volume: approximately 0.55 m3 41126ä

Year of construction: 2020, operating hours: 12,542 h, condition: used, 1. Continuous cleaning system, manufacturer: PERO AG, year of manufacture: 2020, mains connection: 400V, 50Hz, rated current 241A, system for cleaning various stamped parts, machine consists of various rinsing tanks, nozzles, and conveyor belts, various rinsing baths and nozzles for degreasing, and conveyor belts for transfer, 3 motors, manufacturer: Dietz, 1.7kW, 1 motor, manufacturer: Dietz, 1kW, 3 motors, manufacturer: Lowara, 3-3.28 kW, 1 motor, manufacturer: SEW, 0.37 kW, 2 motors, manufacturer: Elektror, 4 kW, 2 motors, manufacturer: Küenle, 0.55 kW, machine hours: 12,542, average utilization: 85%, last documented maintenance: 02/12/2025, system generally operational, follow-up work has been carried out. Codpfx Ae Aa Agboqvjri

Condition: used, Band filter system, coolant treatment system, coolant filter AME - AMADA type PS 100 Gravity-fed paper band filter Manufacturer's number 12918, year of manufacture 2017 Filter capacity for emulsion: approx. 100 l/min. Filter capacity for oil: approx. 70 l/min. Tank capacity: max. 300 liters Width of the filter fleece roll: 710 mm Overall height of the filtration unit: 560 mm Submersible pump motor power: 0.24 kW Submersible pump flow rate: 100 l/min. Submersible pump pressure: 0.7 bar Power connection: 400 Volt, 50 Hz. - Submersible pump BRINKMANN, type TB 100 - Tank with 3 float switches - Sight glass for fill level - Filter fleece roll housed in a box with a lid - Float switch for filter fleece chain drive Crjdpfo Agw Egox Aqvoi - Contamination collection container for filter fleece - Can be moved with a pallet truck, both longitudinally and transversely Space requirement: L x W x H 1700 x 920 x 1100 mm Weight: 230 kg Very good condition Application: Compact filter for coolant, equipped with a roll of filter fleece for cleaning coolants in machining operations. Self-contained cleaning unit, also in combination with chip conveyors, e.g. on machining centers, or as a local filter for several machine tools. Also suitable for grinding machines. Function: Dirty liquid flows into the filter basin and, after passing through the filter fleece and support belt, flows into the clean tank. The retained dirt particles build up a filter cake and increase the flow resistance – the level rises. When a defined height is reached (via a float switch), the band drive is activated, bringing clean filter fleece onto the filter surface. The flow rate increases, and the level of the dirty liquid decreases again. The contaminated fleece ends up in a dirt and sludge container.

Condition: used, Year of construction: 2016, 1) Zyklomat coolant cleaning system, application: cleaning of grinding emulsion, cleaning capacity: 350l/min, recirculation clean tank-dirty tank: 100-350l/min, max. machine supply: 250l/min, supply pressure: 3.5bar, filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3, separation limit: approx. 5µm, medium: emulsion 3-6%, max. medium temperature: 50°C, solid particles: brass particles, max. solids quantity: 15kg/h, total volume: 5.14m³, operating volume: 3.6-4.58m³, process: fully automatic full-flow filtration, sludge discharge: fully automatic, with non-flowing consistency, 2) double scraper tank for grinding sludge KR 1.75-5.1, total volume: 5.14m³, max. volume: 4.58m³, length: 4,000mm, including 70mm reinforcement, width: 1,890mm, including 140mm reinforcement, height: 1,105mm, including 100mm base profile, neck height: 2,300mm, max. theoretical discharge capacity: 15kg/h, function: coolant storage tank with integrated clean tank, sedimentation and flotation tank with fully automatic sludge discharge, serviced annually, fully functional, no known defects, with documentation. An on-site inspection is possible. Csdpszvghkjfx Aqveri

Condition: used, Year of construction: 2013, ZIPPEL REMA K1 400 3 LB Industrial parts cleaning system (washing system) Year of manufacture: 2013 Washing, rinsing, and drying in a continuous system with a washing basket to remove oils, chips, and dirt from workpieces before further processing or assembly. Approved according to WHG (German Water Resources Act). System is currently powered. System description, technical data & plans – see PDF. All technical specifications, illustrations, and content are non-binding and without warranty. Subject to change and errors. Crjdpfx Aqj Ahm Smovoi All other accessories visible in the photos are not included in the scope of delivery and are therefore not part of this sale. The scope of delivery only includes the accessories that are explicitly listed here, in the order confirmation, and on the invoice. EXW (Ex Works) D-92729 Weiherhammer Exclusively disassembly, removal, and loading Delivery time: immediately Subject to prior sale / Payment due immediately upon purchase.

Year of construction: 2022, condition: like new (used), For sale is a professional Mobile CIP (Cleaning In Place) System manufactured by the renowned German brewery equipment manufacturer, Kaspar Schulz. Crsdpfx Aqezm R Amovei The unit was manufactured in 2022/2023 and has never been used in regular production. It is in excellent, near-new condition. Ideal for: Craft breweries Industrial breweries Distilleries Beverage manufacturers Dairy industry Food processing plants Main Features: 2 × 210 L stainless steel tanks Fully automated WAGO PLC control system WAGO TP600 Touch Panel HMI Siemens SITRANS MAG 5000 electromagnetic flow meter Siemens MAG 1100 F DN40 sensor ProMinent chemical dosing pumps High-quality KPA process pump Stainless steel pipework and frame Complete electrical control cabinet Technical Specifications: Manufacturer: Kaspar Schulz (Germany) Year of manufacture: 2022/2023 Tank capacity: 2 × 210 liters Power supply: 3 × 400 V / 50 Hz Current: 19 A Main fuse: 32 A Maximum operating temperature: 80°C Flowmeter: Siemens SITRANS MAG5000 + MAG1100F Control: WAGO PLC + TP600 Touch Panel Condition: The machine has never been used in continuous production. Excellent cosmetic and technical condition. Can be inspected in Wrocław, Poland. Worldwide shipping can be arranged. VAT invoice available. Additional photos, videos, and technical documentation are available upon request.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Industrial self-cleaning disc filtration system manufactured by CHEMIPOL. The unit was installed as part of a reverse osmosis water treatment plant and was used for water pre-filtration. The system is equipped with eight TW-type disc filter units operating in parallel. Automatic cleaning is controlled by a Siemens PLC with an HMI operator panel. TECHNICAL DATA Manufacturer: CHEMIPOL Model: TW8P2L3 Equipment type: Self-cleaning disc filtration system Crsdpjzvlm Ejfx Aqvei Number of filter units: 8 Filter type: TW disc filters Configuration: Parallel operation Cleaning system: Automatic self-cleaning Pressure monitoring: Two pressure sensors measuring inlet and outlet pressure Control system: Siemens PLC Operator interface: HMI touchscreen Application: Water treatment and reverse osmosis pre-filtration

Year of construction: 2007, operating hours: 8,000 h, condition: ready for operation (used), functionality: fully functional, product height (max.): 80 mm, product length (max.): 80 mm, product width (max.): 80 mm, machine/vehicle number: 26240, This KSN Drum Washer 250 WRD is a used industrial cleaning system designed for reliable and efficient parts cleaning. The drum washing process provides consistent cleaning results while reducing manual handling and can be integrated into existing production lines. Choosing a used KSN cleaning system offers a significantly lower investment compared to a new system, combined with proven technology, fast delivery and the possibility of customization to suit the production requirements. KSN drum washers are designed for many years of operation in industrial environments. Standard equipment: Grundfos pump Fully insulated construction Automatic level and pressure monitoring Crjdpfxezy Hd Hj Aqvei Technical details can be found in the attached PDF document.

Condition: used, Year of construction: 2005, functionality: fully functional, total width: 6,300 mm, total height: 2,100 mm, total length: 20,000 mm, working width: 2,600 mm, input voltage: 380 V, type of input current: three-phase, roll width: 2,600 mm, roller length: 7,600 mm, We offer this ready-to-use ICO SYSTEM reactive PUR hot melt press, model ICO SYSTEM, manufactured in 2005. ICO SYSTEM reactive PU hot melt press line – 2,600 × 7,000 mm For sale: complete industrial reactive PU hot melt press line for single-sided bonding of large sheet materials. This robust production line from ICO SYSTEM International Coating GmbH has been successfully used for years by TABB Interior Systems BV for the production of high-quality laminated sheet materials. The installation is in excellent technical condition, is fully operational, and can be put into production immediately. Key features: Reactive PUR hot melt bonding Maximum panel size: 2,600 × 7,000 mm Suitable for single-sided bonding Year of manufacture: approx. 2005 Fully functional and well-maintained PLC control with touchscreen Automatic vacuum portal for precise panel positioning Throughfeed system for controlled curing and constant pressing force Roller conveyors and transport tables included Suitable for: The installation is suitable for bonding a variety of flat sheet materials, including: plywood MDF Cjdpfx Aqezlh Auovsri HDF particleboard HPL composite panels aluminum and steel sheets various other industrial sheet materials. Production process The line is designed for an efficient and reproducible production process: positioning of the bottom sheet application of reactive PUR hot melt automatic placement of the top sheet using a vacuum portal passage through the heated press controlled curing and output of the finished product. Thanks to the automatic handling, large panels are produced quickly, accurately, and with consistent adhesive quality. Scope of supply The complete installation includes, among other things: ICO SYSTEM heated throughfeed system automatic vacuum portal with suction cups conveyor belts and roller conveyors control cabinet with PLC/HMI complete steel structure and handling. Condition The machine is fully operational, is still in use in production, and is available only due to a change in the production process. Inspection while running is possible by appointment. Interested? Please contact us for additional information, technical specifications, a demonstration, or an inspection. This high-quality industrial press line is ideally suited for companies that want to efficiently bond large sheet materials with a high-quality PUR hot melt bond.

Year of construction: 2016, condition: good (used), functionality: fully functional, machine/vehicle number: 45129, FISA Ultrasonic Mold Cleaning System 3 VST 1200/P-INSON+Z1, Year of Construction 2016 Manufacturer: FISA Ultraschall GmbH / FISA Manufacturing Srl Type: Special 3 VST 1200/P-INSON+Z1 Year of Construction: 2016 Serial Number: 45129 Internal dimensions of the tanks: approx. 1,600 × 600 × 1,250 mm Maximum mold weight: 2,200 kg Description Offered is an industrial FISA ultrasonic cleaning system for cleaning and maintaining large injection molds, die-casting molds, and other molds, as well as heavy components. The system consists of three stations arranged one behind the other for ultrasonic cleaning, cold rinsing, drying, and preservation. The design is intended for workpieces or molds with a weight of up to 2,200 kg. The VST 1200 cleaning station is designed as a noise-insulated INSON version. It features a pneumatically operated hinged cover, automatic water supply, safety float switch, vapor extraction with fans, and an adjustable timer. The ultrasonic generation is provided by two FISA USM 28/R generators and four MAGNASONIC transducers FB 550 PLAN. A cold rinsing station VST 1200 and a drying and preservation station VST 1200/P with Option D are connected to the cleaning station. The preservation station also has a pneumatically operated hinged cover, a vapor extraction system, and a sight glass for liquid level control. Above the preservation tank, there is a drip and blow-off station with side doors, a splash guard, an extraction system, and a flexible hose for blowing out the cleaned molds. Scope of supply - Cleaning station VST 1200 - Cold rinsing station VST 1200 - Drying and preservation station VST 1200/P - Two ultrasonic generators USM 28/R - Four MAGNASONIC transducers FB 550 PLAN - Pneumatically operated hinged covers - Vapor extraction system including fans - Drip and blow-off station - Stainless steel drip tray under the entire system - Two special mold support bars for a total load of 2.2 tons - Immersion rack VST 350 INOX with two inserts - Optical alarm indicator - Remaining runtime display - Weekly timer - Walkway with stairs and safety railing - Control cabinet and operating unit - Existing technical documentation Technical data - Usable internal dimensions: approx. 1,600 × 600 × 1,250 mm Cjdpjzx Eftofx Aqvsri - Maximum workpiece load: 2,200 kg - Number of process stations: three - Sound power level according to the measurement report: 78 dB(A) - Design: Stainless steel - CE declaration of conformity available - Initial acceptance and instruction in 2016 documented - Drip tray: approx. 6,500 × 1,800 mm - Installation area including walkway and operating area according to drawing Condition Used industrial system. The system is shown fully assembled and connected in the pictures. A successful handover and instruction were documented in 2016. The current operating condition, the tightness of the tanks, the performance of the ultrasonic generators, and the function of the heating, pumps, pneumatics, extraction system, and control system should be checked again before sale or during an inspection. Inspection and functional testing possible by arrangement. Sale in the existing condition and scope of supply according to the illustrations and documentation. Dismantling, loading, and transport must be coordinated in advance due to the size and weight.

Year of construction: 2005, operating hours: 10,000 h, condition: ready for operation (used), functionality: fully functional, product height (max.): 100 mm, product length (max.): 100 mm, product width (max.): 100 mm, machine/vehicle number: 7614-23, This KSN Drum Washer 350 WRD is a used industrial cleaning system designed for efficient and reliable parts cleaning. The drum washing process provides consistent cleaning results while reducing manual handling and is suitable for integration into existing production lines. Choosing a used KSN cleaning system offers a significantly lower investment compared to a new system, combined with proven technology, fast delivery and the possibility of customization to suit specific production requirements. KSN drum washers are designed for many years of operation in demanding industrial environments. Equipment and features: Grundfos pump Cjdpfx Aozy Hkteqvori Fully insulated construction Automatic level and pressure monitoring Adjustable drum speed Technical details can be found in the attached PDF document.

Condition: used, Year of construction: 1998, Used Equipment Year of Manufacture: 1998 Features and Technical Specifications: - Model: RP 190 - Year of manufacture: 1998 - Serial No.: 160 - Capacity: 60 l - Discharge flow rate: 280 l/h Csdps Ahkk Tofx Aqveri - Maximum operating pressure: 6 bar - Permitted solvents: See operating instructions - GS-certified

Condition: excellent (used), Year of construction: 2018, Machine Data Machine Type: Cleaning machine with solvent and vacuum cycle Crodpfxo Ahfito Aqvoi Intended Use: Degreasing of metallic parts contaminated with oil and chips from mechanical machining Usable Solvents: Modified alcohol; Class AIII hydrocarbons (flash point > 60 °C) Load Capacity: 30 kg Basket Dimensions: 371 × 221 × 200 mm (height 200 mm) Capacity (cycles per hour): 4–5 Filling Volume: 140 l Noise Level: < 70 dB(A) Control System: Siemens SIMATIC, operator panel SIMATIC HMI Solvent Tank: Empty, solvent not included in the scope of delivery Connection, Weight and Dimensions Dimensions: 1200 × 2000 × 1955 mm (height 1955 mm) Machine Weight: 700 kg Connected Load: 18 kW Mains Connection: 400 V / 50 Hz Auxiliary Voltage: 24 V DC / 24 V AC Equipment and Scope of Delivery Siemens operator panel SIMATIC HMI Accessory box with hoses, case, and small parts as shown in the photo Related accessories as shown in the photos Accessory box and accessories as shown in the photos. Solvent not included in the scope of delivery. Technical specifications are subject to change without notice. Errors and prior sale excepted. The characteristics agreed upon in the purchase contract and the agreed scope of delivery shall be binding.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, We are offering for sale our component cleaning system from Ziegener + Frick. The system is in like-new condition. Various loading frames are included. ION Clean cleaning table. Summary with AI: The IONClean cleaning table from Ziegener + Frick is a soundproof, turnkey stand-alone system for contactless and electrostatic surface cleaning of components. You can find an example video from the manufacturer under Videos. We will gladly answer any questions you may have about the system. Codpfx Aoz Enr Tjqvjri An inspection is possible by appointment. New price of the system: approximately €85,000.

Condition: used, Bous Waschfix Cleaning and Degreasing System For sale is a professional, industrial parts cleaning system/washing machine of the "Waschfix" type. This system is ideally suited for workshops, production facilities, or metalworking companies for the thorough cleaning, degreasing, and maintenance of components and workpieces. The system is robustly built and features an external, high-quality pump and stainless steel filter unit for cleaning the washing medium, as well as a clear and intuitive control panel. The device cleans highly efficiently using a hot water spray process (up to +70 °C) with environmentally friendly, water-based cleaners (pH value 7–11). Thanks to the integrated two-hand safety operation and the clear control panel, operation is absolutely safe and straightforward. Technical data: Manufacturer: Bous Cjdpoz Rm U Sefx Aqvjri Type: Waschfix Manufacturing number: 18251 / 2001 Capacity (filling volume): 120 liters Permissible cleaning agent: pH value 7 – 11 (neutral to alkaline) Maximum operating temperature: 70 °C (thermostat controlled) Heating power (electric): 6 kW Required compressed air connection: 6 bar (for the blow-off function) Electrical connection: 230 / 400 V | 50 Hz Total power consumption: 16 A Net system weight: approx. 450 kg Special equipment: Includes a sturdy floor collection tray with skids (ideal for easy transport with a pallet truck or forklift). Scope of delivery: Main washing cabinet, control unit, separate pump and filter unit made of stainless steel, collection tray. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, RSA NC-V 2000 Deburring Machine + Tube Washing System + Coral Filter Complete industrial tube processing and finishing line The system consists of three high-quality industrial components: 1. RSA RASAPLAN NC-V 2000 – High-performance deburring machine Csdjzklb Eepfx Aqvori Function: Automatically processes workpieces up to a maximum length of 2,000 mm. 2. BOUS (CeBeCo) Rowamat RL 200 – Continuous tube washing system Function: Extremely robust and durable stainless steel welded construction. Accessories: 3. CORAL IperJet DF4 – Cartridge filter extraction system Performance: 4 horizontal high-performance filter cartridges with fully automatic jet-pulse compressed air cleaning (very low maintenance). Function: Reliably extracts brush dust, grinding residue, or fumes from the washing system. The RSA Rasaplan NC-V2000 is a fully automatic, high-performance brush deburring machine specifically designed for the simultaneous internal and external deburring of tube ends and profiles in an industrial continuous process. The number "2000" indicates the maximum workpiece length of 2000 mm, which can be automatically processed in the standard configuration. “Everything from a single source: We would be happy to offer you suitable bank financing for your project.” More new and used items can be found in our shop! International shipping costs upon request!

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 2013-5191, Ultrasonic cleaning system, less than 2 operating hours Csdpoxqnqpjfx Aqvsri

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, For sale is our Fisa 3-chamber cleaning system for aluminum die-casting tools. The sale includes the associated ABUS crane, as shown in the picture. Plus, there are 2 full containers of cleaning agent. Csdsz Rpnnjpfx Aqvori

Condition: used, Bous Waschfix Industrial Cleaning and Degreasing System This system is ideally suited for workshops, production facilities, mechanical engineering companies, or automotive repair shops for the automatic and thorough cleaning and degreasing of workpieces, machine parts, and tools. The device cleans highly efficiently using a hot water spray process (up to +70 °C) with environmentally friendly, water-based detergents (pH value 7–11). Thanks to the integrated two-hand safety control and the clear control panel, operation is absolutely safe and straightforward. Crjdpfx Ajz Nwbmeqvsi • Integrated fine filter for a longer service life of the cleaning water and cleaner cleaning results. • Integrated drain pump for effortless emptying of the tank during maintenance. • Compressed air blow-out function for subsequent drying of the cleaned components. Technical data Manufacturer: BOUS Cleaning & Degreasing Systems Type / Model: WASCHFIX Year of manufacture: 2006 Tank capacity: 100 liters Operating temperature: up to +70 °C Electrical heating power: 6 kW Compressed air connection: 6 bar (for blow-out function) Electrical connection: 230 / 400 V Total power consumption: 17 A Control voltage: 24 V DC / 50 Hz Net system weight: approx. 500 kg "Everything from a single source: We will gladly offer you suitable bank financing for your project." You can find more new and used items in our shop! International shipping costs upon request!

Year of construction: 2022, operating hours: 50 h, condition: new, functionality: fully functional, heating capacity: 12 kW (16.32 HP), product height (max.): 100 mm, product length (max.): 100 mm, product width (max.): 100 mm, machine/vehicle number: 43865, The KSN Drum Washer 350 WRD is an industrial cleaning system designed for efficient and reliable parts cleaning in automated production environments. The system combines washing, draining, rinsing and drying in one automated process, ensuring consistent cleaning results while reducing manual handling. The rotating drum provides continuous movement of the components throughout the cleaning process, making the cleaning system particularly suitable for industrial applications requiring efficient and repeatable processing of parts. Designed for continuous operation, the Drum Washer 350 WRD can be integrated into existing production lines and contributes to increased productivity and reduced operating costs. Standard equipment: Siemens PLC Grundfos pump Fully insulated construction Automatic level and pressure monitoring Csdpjzy E Drjfx Aqveri Technical specifications can be found in the attached PDF document.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 20681, The Semmelroth S 50229/2 is a fully automatic, industrial continuous cleaning system in a timed linear design. It was specifically developed for the demanding cleaning of parts and surface preparation of aluminum and cast parts in industrial multi-shift operations. The system is completely made of stainless steel to ensure maximum corrosion resistance and durability when using aqueous cleaning media. System and Conveyor Technology - Transport system: Integrated, automated carrier circulation system. - Process coupling: Designed for timed linear systems for seamless integration into linked production and robotic cells. - Carriers: Customer-specific carrier design for precise and repeatable component placement during the process. Credpezzpb Rjfx Aqvsi Zone Layout and Process Steps The system goes through a five-stage process chain to meet the highest requirements for particulate and film-like surface cleanliness: - HD cleaning zone (high pressure): Mechanical pre-cleaning using high-pressure nozzles for targeted removal of chips, machining residues, and stubborn contaminants. - Cleaning zone (washing): Aqueous main cleaning (spraying/flooding) for chemical degreasing and removal of dirt from the surface. - Rinsing zone: Downstream rinsing stage for residue-free removal of cleaning agent components from the component surfaces. - Drying zone: Highly efficient blowing and drying unit for complete removal of residual moisture (prevents staining and corrosion). - Cooling zone: Targeted component cooling at the end of the process to thermally stabilize the parts for subsequent processes (e.g., metrology, testing, or packaging). Media preparation, filtration, and peripherals To ensure long bath life and consistent cleaning quality, the system is equipped with extensive peripheral technology: - Filtration: Three separate filtration stages (each designed for up to 10 bar) for the cleaning, rinsing, and high-pressure zones. - Filter monitoring: Dual differential pressure measurement for automatic detection of the filter saturation level. Oil separation: 1x highly efficient oil separator (Type ÖT 60) for continuous removal of foreign oils from the washing bath. - Exhaust air management: 1x air-cooled condenser (Type RL 150) for condensation and extraction of process fumes (reduces humidity at the installation site). - Fluid management: Integrated wastewater piping for cleaning and rinsing tanks, including a robust 1" wastewater pump for emptying. Safety and System Monitoring - Process control: Two integrated viewing windows with splash-proof interior lighting for optical monitoring of the cleaning process during operation. - Environmental protection / emergency protection: Robust drip tray under the entire system, equipped with a leak detection probe for automatic shutdown in the event of media loss. Technical Performance Data - Manufacturer: Semmelroth Anlagentechnik - Model: S 50229/2 - Total connected load: approx. 110 kW - Material: Stainless steel (V2A / V4A)

Condition: used, Stratasys Stratasys Fortus 450mc Industrial 3D Printer + Krumm Tec CLEAN MATIC 3150 + Transformer – Complete System Description: The Stratasys Fortus 450mc is an industrial, high-end 3D printer from the FDM series (Fused Deposition Modeling). It is used worldwide in prototype manufacturing, small-batch production, mechanical engineering, the automotive industry, medical technology, and aerospace. For sale is a complete industrial 3D printing system consisting of: Stratasys Fortus 450mc (3D Production System) Krumm Tec CLEAN MATIC 3150 cleaning system for support material Badger Magnetics 8 kVA transformer (suitable for EU power grids) The system comes from a professional application and was used for the production of high-quality functional parts and prototypes. Key features of the Fortus 450mc: Industrial FDM 3D printer with a large build volume: 406 × 355 × 406 mm Prints high-strength materials such as ABS-M30, PC, ASA, Nylon, ULTEM* Very high dimensional accuracy and repeatability Network-enabled, touchscreen, easy operation Ideal for prototyping, production of small series, tooling, jigs and fixtures (*depending on material licenses) Technical data Fortus 450mc Voltage: 120/208 V, 3-phase (transformer for EU operation included) Current consumption: 18 A Dimensions approx.: 127 × 91 × 196 cm Csdpfx Ajzixy Seqvori Software version according to display: 6.2.6624.0 Krumm Tec CLEAN MATIC 3150 Model: CM 3150 US/PS 4 kW, 400 V, 50 Hz, 16 A Ideal for removing SR-30 / SUP706 support material Weight: 140 kg Weight approx.: 600–700 kg Important note: “The table shown in the photos is not part of the sale.” Scope of delivery Stratasys Fortus 450mc Krumm Tec CLEAN MATIC 3150 cleaning system Badger Magnetics 8 kVA transformer (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: new, functionality: fully functional, Year of construction: 2016, operating hours: 40 h, heating capacity: 12 kW (16.32 HP), product height (max.): 60 mm, product length (max.): 60 mm, product width (max.): 60 mm, machine/vehicle number: 40017, The KSN Drum Washer 350 UST Ultrasonic is an industrial cleaning system designed for efficient and thorough parts cleaning. Combining drum washing with ultrasonic cleaning technology, the system is particularly suitable for components with complex geometries, holes and cavities, as well as applications with high cleanliness requirements. Ultrasonic cleaning uses high-frequency sound waves in liquid to effectively remove contaminants while providing a gentle cleaning process without mechanical wear. Standard equipment: Siemens PLC Grundfos pump Csdpfxezy Euws Aqvsri Fully insulated construction Automatic level and pressure monitoring You can find technical details in the PDF attached document.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, type of input current: three-phase, Carton sealer, packaging machine, carton sealing machine, sealing tape machine, adhesive tape machine Codpezhv Rlsfx Aqveri -Manufacturer: Soco System, carton sealer type T-55 -Carton width: max. 550 mm -Overall dimensions: 1100/800/1750 mm -Weight: 150 kg This additional information is standard for this model. Please always double-check the details during a visit. The Soco System T-55 Cartoning Machine is a state-of-the-art packaging solution designed for efficient and high-speed cartoning of various products. With its advanced technology and robust construction, the T-55 is ideal for industries requiring precise and reliable cartoning, such as food, pharmaceuticals, cosmetics, and consumer goods. Featuring a compact and ergonomic design, the T-55 maximizes floor space utilization while ensuring easy operation and maintenance. Its modular construction allows for flexibility in configuration, enabling seamless integration into existing production lines and adaptation to changing packaging requirements. The T-55 Cartoning Machine offers versatile carton handling capabilities, accommodating a wide range of carton sizes and styles, including straight-line, reverse-tuck, and glue-sealed cartons. It utilizes advanced automation and servo-driven mechanisms to ensure accurate carton forming, product loading, and sealing, minimizing downtime and enhancing productivity. Equipped with intuitive controls and a user-friendly interface, the T-55 provides operators with easy access to machine settings and diagnostics, facilitating quick setup and changeover between different carton formats. Additionally, the machine incorporates safety features to protect operators and prevent damage to products during operation. Overall, the Soco System T-55 Cartoning Machine is a reliable and efficient packaging solution that meets the demanding requirements of modern production environments, delivering consistent performance and high-quality cartoning results.

Condition: refurbished (used), Year of construction: 2010, operating hours: 5,600 h, functionality: fully functional, machine/vehicle number: 2.519, year of last overhaul: 2026, protection type (IP code): IP65, ejection height: 1,100 mm, nominal power: 4 kW (5.44 HP), operating pressure: 6 bar, operating temperature: 80 °C, working range: 950 mm, rotational speed (max.): 1 rpm, rotational speed (min.): 1 rpm, temperature: 80 °C, total height: 700 mm, compressed air connection: 6 bar, BvL cleaning system, Model Ocean RW 900 S. Csdpfx Aqjzf Hm Sjvori Optional features such as filter technology, etc., are still available.