Used Annealing for sale (111)

Condition: used, Year of construction: 2001, functionality: fully functional, Model: BAS 051. Automatic Flash Butt Welding Machine for Band Saw Blades. Pneumatic clamping. Ijdpfx Aoxcnzrsg Uotb Annealing pyrometer. Inserting bar for blade positioning. UniOp automatic annealing temperature control. Machine cleaned and repainted. Year of manufacture: 2001. Nominal primary voltage: 380 [V AC]. Max. welding rating: 8 [kVA]. Clamping force: 20 [kN]. Forging force: 5 [kN]. Welding ranges. Band saw blades for wood: 6-50 [mm]. Bi-metal bandsaw: 6-41 [mm]. Hoop knives: 6-50 [mm]. Stainless steel bandsaw: 6-30 [mm]. Weight: 600 [kg]. Dimensions (W*D*H): 1350*1000*1700 [mm]. Instructions and packing included.

Year of construction: 2015, condition: used, functionality: fully functional, machine/vehicle number: 1412016.02, SRU 1200x5000-EG-A-UK Vibratory Conveyor Trough 1200 x 5000 mm Original purchase price: €81,600 Negotiable Original invoice available Conveyed material: Metal mix, steel scrap Capacity: approx. 15 t/h Bulk density: 0.5 – 0.6 t/m³ Grain size: typically approx. 0 – 300 mm (~90%), max. 850 mm diagonal dimension Moisture: dry, free-flowing and easy to convey, not cohesive Temperature: cold Application: Feeding material onto the vibratory trough Trough width: 1200 mm Trough length: 5000 mm Trough height: 250 mm Inclination: horizontal Mounting: on hollow rubber springs Iodpfx Agoxy Rqdj Ujtb Vibration-resistant steel construction, consisting of: the trough body, 6 mm thick, grade R St 37-2 with reinforcements bolted exciter console, stress-relieved annealed and machined bolted special discharge with flanged collar incl. 2 outlets approx. 600 mm wide the bolted wear liners for base and sides, 8 or 6 mm thick, made from wear-resistant special steel (e.g., Hardox 450 or similar) two steps: 1st step approx. 400 mm high after approx. 1,500 mm of conveying length; 2nd step approx. 200 mm high after an additional approx. 1,250 mm of conveying length acceleration sensor hollow rubber springs supporting structure for a trough bottom height of approx. 1,800 mm Drive: 2 vibration motors, 400 V, 50 Hz, IP 65, rated power approx. 2 x 7.5 kW = approx. 15.0 kW at 960 rpm. The amplitude can be infinitely adjusted when at a standstill. Equipped with PTC thermistors for temperature monitoring in frequency inverter operation Drive arrangement: underneath, within horizontal profile Permissible ambient temperature: -20 to +40°C This vibratory conveyor trough is used and sold in its current condition, with any and all warranties excluded. The buyer has had the opportunity to inspect the item thoroughly.

Year of construction: 2000, condition: good (used), Temptec annealing furnace: Isdpfxex Tcmys Ag Ustb Max workpiece size: approx. 1200 × 1200 × 1200 mm Loaded for transport.

Condition: new, Year of construction: 2025, Laser fiber cutting machine GEP Series A modern, fully enclosed fiber laser for sheet metal cutting. The offer includes a laser with a power from 1000W to 6000W, and the highest quality components ensure long and trouble-free use of the fiber laser. Iedpeizi S Iefx Ag Uetb Fiber optics laser cutters constitute modern devices with many advantages. These are not only a perfect and more profitable alternative to the CO2 technology, but they also possess a lot of pros by themselves, such as improving the production by considerable margin and increasing its quality. FIBER technology allows for cutting sheets and other materials of various thickness: from very thin to very thick. The length of a wave in a FIBER laser is 1.064 micrometre long. The biggest advantages of the laser are failure-free optical fiber cable no elements that wear out the source of the fiber optic laser takes 1/3 less space high energetic efficiency - 100000 hours of work universal applicability (specific metal sheets, carbon and stainless steel, copper, brass, aluminium, titanium) Optical fiber laser increases the efficiency by 80% reduces the handling costs by 70% saves 80% of energy minimises the consumption of gas saves space in the workplace by 30% Technical parameters WORKING AREA 1500x3000 mm | 2000x4000 mm | 2000x6000 mm POWER 1000W 2000W 3000W 4000W 6000W POSITIONING REPEATABILITY ACCURACY ±0.02 mm/m MAXIMUM SPEED 120 m/min MAXIMUM ACCELERATION 1,5G DIMENSIONS 8850x2850x2310 mm POWER SUPPLY 400V 50Hz Safety and pollution Fully built-on laser Observational window with a laser protective glass compliant with the European CE marking The smoke produced by cutting can be filtered internally, and not pollute environment Sliding gate made of annealed aircraft aluminium The construction of the sliding gate is made of annealed aircraft aluminium, formed with a strength of 4300 tonnes, achieving unprecedented rigidity. Aircraft aluminium has many advantages: high rigidity (higher than cast iron), small mass, resistance to corrosion and oxidation as well as susceptibility to machining. Replaceable working table Replaceable working table consists of upper and lower platforms, whose movement and swapping are controlled through the controller. The machine can swap the platform in 15 seconds. Welded bed made of rectangular profiles The inner structure of the bed adopts a metal honeycomb structure which is welded by a plurality of rectangular tubes. Inside the tubes, stiffeners are placed to increase the strength and tensile strength of the bed, and also to increase the strength and stability of the guide rail to effectively avoid deformation of the bed. RayTools head Automatic focus regulation – Autofocus – The software automatically regulates the focusing lens during cutting metal sheets of various thickness. The speed of automatic focus regulation is 10 times higher than the speed of manual regulation. Greater range of manual regulation – The range of regulation -10mm - + 10 mm, precision of 0.01 mm is useful in when it comes to materials of different thickness (0–20 mm) – Below 1500W. Long durability. Collimating lenses and converging lenses possess a heat sink which cools down water, in turn decreasing the temperature of a cutting head, in order to improve the durability of the cutting head. The laser uses components from world producers

Condition: new, Year of construction: 2025, Laser fiber cutting machine GEP Series A modern, fully enclosed fiber laser for sheet metal cutting. The offer includes a laser with a power from 1000W to 6000W, and the highest quality components ensure long and trouble-free use of the fiber laser. Fiber optics laser cutters constitute modern devices with many advantages. These are not only a perfect and more profitable alternative to the CO2 technology, but they also possess a lot of pros by themselves, such as improving the production by considerable margin and increasing its quality. FIBER technology allows for cutting sheets and other materials of various thickness: from very thin to very thick. The length of a wave in a FIBER laser is 1.064 micrometre long. The biggest advantages of the laser are failure-free optical fiber cable no elements that wear out the source of the fiber optic laser takes 1/3 less space high energetic efficiency - 100000 hours of work universal applicability (specific metal sheets, carbon and stainless steel, copper, brass, aluminium, titanium) Optical fiber laser increases the efficiency by 80% reduces the handling costs by 70% saves 80% of energy minimises the consumption of gas saves space in the workplace by 30% Technical parameters WORKING AREA 1500x3000 mm | 2000x4000 mm | 2000x6000 mm POWER 1000W 2000W 3000W 4000W 6000W POSITIONING REPEATABILITY ACCURACY ±0.02 mm/m MAXIMUM SPEED 120 m/min MAXIMUM ACCELERATION 1,5G DIMENSIONS 8850x2850x2310 mm Itjdpfoiznlysx Ag Usb POWER SUPPLY 400V 50Hz Safety and pollution Fully built-on laser Observational window with a laser protective glass compliant with the European CE marking The smoke produced by cutting can be filtered internally, and not pollute environment Sliding gate made of annealed aircraft aluminium The construction of the sliding gate is made of annealed aircraft aluminium, formed with a strength of 4300 tonnes, achieving unprecedented rigidity. Aircraft aluminium has many advantages: high rigidity (higher than cast iron), small mass, resistance to corrosion and oxidation as well as susceptibility to machining. Replaceable working table Replaceable working table consists of upper and lower platforms, whose movement and swapping are controlled through the controller. The machine can swap the platform in 15 seconds. Welded bed made of rectangular profiles The inner structure of the bed adopts a metal honeycomb structure which is welded by a plurality of rectangular tubes. Inside the tubes, stiffeners are placed to increase the strength and tensile strength of the bed, and also to increase the strength and stability of the guide rail to effectively avoid deformation of the bed. RayTools head Automatic focus regulation – Autofocus – The software automatically regulates the focusing lens during cutting metal sheets of various thickness. The speed of automatic focus regulation is 10 times higher than the speed of manual regulation. Greater range of manual regulation – The range of regulation -10mm - + 10 mm, precision of 0.01 mm is useful in when it comes to materials of different thickness (0–20 mm) – Below 1500W. Long durability. Collimating lenses and converging lenses possess a heat sink which cools down water, in turn decreasing the temperature of a cutting head, in order to improve the durability of the cutting head. The laser uses components from world producers

Year of construction: 2015, condition: excellent (used), Dip-Tech GlassJet AR6000, Digital Printer for Glass, year 2015 Print resolution: 360 dpi (real) DIP SPECTRUM INK: Ceramic ink for both tempered and fired annealed glass Ink colors: Black, white, etch imitation, and various spot colors There are currently 7 print heads in operation: 4 black and 3 white. They enable the printing of black and white. Maximum glass size: 3300 x 6000 mm Minimum glass size: 400 x 400 mm Glass thickness: 2 – 19 mm Operators: 1 Inline functions: Continuous conveyor Overall dimensions: 6071 x 7746 x 1600 mm (width x length x height) Ijdpforhkp Eox Ag Ustb Image format: All common graphic formats including: PDF, PS, EPS, Tiff, BMP and JPEG Ambient temperature: 18 – 25 C Installed power: 400 VAC x 16A, 3 Ph. 50/60Hz In very good condition. Dismantled in February 2024. Available: NOW

Condition: new, Year of construction: 2025, functionality: fully functional, nominal heat output: 930 kW (1,264.45 HP), temperature: 1,000 °C, type of input current: three-phase, input voltage: 400 V, warranty duration: 12 months, Equipment: documentation/manual, Car bottom combustion furnace (powered by natural gas or LPG) model ST/BT for heat treatments of ferrous metals such as cast iron or steels at temperatures up to 1000°C, complete with one removable trolley and an automatic control and command panel. Itjdpew Ifl Tefx Ag Ueb Furnace suitable for quenching, tempering, hardening, annealing, normalizing, stress relieving, preheating, etc. CE certification declaration 12-month warranty Brand new machine, made in Italy Specifications and attached photos are for reference only; custom-built machines tailored to each specific thermal process are available.

Condition: good (used), functionality: fully functional, The Labcycler Gradient has the same technical features as its brother Labcycler Basic has. In addition, the Gradient function is active which can be applied by Thermoblock 48 , Thermoblock 96 , Thermoblock 96 alu , and Thermoblock 384. Temperature gradients from 8 to 24 zones are possible to determine the optimal annealing temperature. The Thermoblock 96 and 384 can be applied for high through put. The Triple Block can be used in the Labcycler Gradient without gradient function. The package Labcycler Gradient with Thermoblock 96 and Triple Block should be an interesting tool for all standard laboratories. Ordering Information The Labcycler Gradient must be ordered in combination with one Thermoblock. Additionally, a second or more Thermoblocks can be ordered because the system has a quick-block-changing system. A Thermoblock can be changed in a few seconds. The Labcycler Gradient works at all global line voltages Technical Data Line voltage 85 V to 265 V, 50 to 60 Hz Power consumption Maximum 350 W, standby 25 W Noise Idle 38 dBA, typical 44 dBA, maximum 48 dBA Display TFT illuminated colour display ¼ VGA, 5.7“ diagonal, 320 x 240 pixel, touchscreen Heated Lid Programable: Pressure 0 to 120 N, temperature RT up to 110 °C Keyboard Numeric and virtual keys Languages English, German, Spanish Programs 680 standard programs, or at least 3000 steps, the last 16 program runs can be displayed any time, re-start function, programmed and manual pause Iodpfx Agju Tkbnj Ustb Password protection Configurable up to 64 users Administration Administrator rights: Reading & writing Copy function Intersystem-copy-function with Labcycler 48 & 192s, Labcycler Basic, and Labcycler Gradient Good working condition. Please check out our other listings as well.

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 6,000 mm, cutting speed: 8,500 mm/min, workpiece weight (max.): 200 kg, input voltage: 380 V, input frequency: 50 Hz, overall weight: 4,500 kg, total length: 11,380 mm, total width: 2,500 mm, Equipment: CE marking, centralized greasing system, cooling unit, emergency stop, fume extraction, nozzle changer, safety light barrier, 2 Chuck Professional Pipe Laser Cutting Machine Max length of pipe: 6000mm*φ240mm Repeat positioning accuracy: ≤0.03mm Positioning accuracy: ≤0.05mm Max positioning speed: 85m/min Max acceleration: 1.0G Max rotating speed of chuck: 100r/min Round pipe: Φ10mm-Φ220mm Square pipe: 10mm*10mm ~ 150mm*150mm Rectangular pipe: 30*20mm~160*80mm Oval tube/flat oval tube: Short axis≥15mm, long axis≤210mm Channel steel: Max 20# I-beam: Max 18# H steel: Max 175*90mm High-quality chuck 1)High clamping accuracy; 2)Sealed and dustproof; 3)Various types of pipes can be clamped; 4)Low failure rate; High-strength cage structure welded bed, high temperature annealing, gantry milling processing, anti-vibration, anti-torsion and anti-deformation; Professional industrial computer, resistant to high temperature and dust; Ijdpfov Hkmvjx Ag Uetb Dust removal Hollow rear chuck, dust is removed from the inside of the pipe, the dust removal effect is good, meet the requirements of environmental protection; Short tail function Support two kinds of short tail functions: rear chuck inserted short tail, front chuck movable short tail; Ensure that workpieces & pipes can achieve short tails, reducing material waste.

Condition: new, Year of construction: 2025, Equipment: CE marking, Guillotine shear with pneumatic sheet holding device Cutting length: 3100 mm Sheet thickness MS (450 N/mm²): 6 mm Sheet thickness SS (700 N/mm²): 4 mm Strokes per minute: 15 1/min Cutting angle: 1º 30’ Number of hold-downs: 16 pcs. Maximum hold-down force: 14 t Backgauge: 1000 mm Backgauge speed: 200 mm/sec Motor power: 15 kW Oil tank capacity: 200 l Throat depth: 50 mm Support arms: 2 pcs. Support arm with side gauge Table height: 865 mm Table width: 500 mm Table length: 3515 mm Machine length: 4110 mm Machine width: 2200 mm Total width: 3700 mm Machine height: 2100 mm Weight: 7650 kg Heavy-duty steel construction St 44 & stress-relieved, annealed machine frame D-Touch 7 touchscreen CNC controller, user-friendly centralized cutting angle adjustment Ball screw, 1000 mm & automatic swing-up Support balls in the table for improved material handling Side stop with scale & T-slot and tilting stop Itedpfx Agjd Ewubj Ujb Support arms with T-slot and tilting stop Cutting line illumination & 1 m foldable finger guard High-performance hydraulic and electronic components Automatic pressure adjustment Swiveling backgauge Cutting line illumination Foot pedal CE standard for EU Machines can be inspected and demonstrated at our demo center in Staufenberg by appointment at any time. Further machines are available ready for demonstration at our facility in Staufenberg. We are happy to provide further information upon request.

Condition: good (used), Year of construction: 2014, Overall dimensions: 12.4 x 18.8 m incl. safety fencing Number of baskets per oven: 2x 1,170 x 1,150 x 2,000 mm Ijdexr Aviopfx Ag Uetb Reference load weight (net/gross): 1,285 / 2,185 kg Max. load weight (net/gross): 2,000 / 2,700 kg Load: 2,050 x 1,150 x 2,800 mm, external dimensions: 2,950 x 6,400 x 7,800 mm Max. temperature: 600 °C Operating temperature: 510 °C Total heating capacity: 2 x 81 kW = 162 kW electric Quenching water bath: Type = QT-24.16.57/71E Temperature bath max.: 70°C, chamfering volume = 20 m^3 2 ageing furnaces: Type = ADBF-24.16.30/250E External dimensions: 2,800 x 4,850 x 4,000 mm Oven temperature max.: 250°C Operating temperature: 180 °C Total output: 2x 40.5 kW = 81 kW Electrical storage/retrieval section, Gea cooling coil, protective housing, safety equipment, system control 1,056 annealing baskets with stanchion pallets System already dismantled, packed and stored

Condition: excellent (used), Mesh belt continuous furnace CIEFFE type: FNC procedure: tempering, carbonitriding, case hardening lenght: appr. 52 m belt (H x w x d): 25 X 930 X 9300 mm production output: 80-1000Kg/ h connected load: 170kW (HTO) + 35kW (wash) + 135kW (tempering) Heating capacity of natural gas: 768kW (annealing furnace) + 643kW (tempering furnace) Iodpfx Agjxpuahj Ujtb annealing furnace: Belt speed: 20 -172 mm/min max. temperature: 910°C temperature uniformity: ± 7°C (area 1-3), ± 5°C (area 4-6) washing machine: wide conveyor belt: 1000 mm washing sink: 1800 lt rising tank: 1200 lt quantity per hourly production: 700dm3/h tempering furnace: belt speed: 60 - 234 mm/min max. temperature: 650°C temperature uniformity: ± 5°C (150-600°C)

Condition: good (used), The SMT 400 2.4C is a top-class ceramic furnace for continuous operation, designed for a wide range of heat treatment processes. This high-tech device is a vertical convection convection oven that can be used for sintering, annealing, tempering, curing, heat sterilizing, aging and drying a wide variety of items. SMT 400 2.4C operates at temperatures from 350 °F (177 °C) to 2000 °F (1093 °C) and has a capacity of 16 cubic feet (454 l). The oven reaches extreme temperatures quickly and is characterized by exceptional stability Iedpfx Agsq I Sgys Uetb

Condition: as good as new (ex-display), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 1735072, grinding length: 600 mm, grinding width: 300 mm, total height: 1,800 mm, total length: 2,630 mm, total width: 1,550 mm, distance table to spindle center: 500 mm, table load: 300 kg, grinding wheel width: 38 mm, spindle speed (max.): 1,450 rpm, overall weight: 1,750 kg, power: 3.75 kW (5.10 HP), input voltage: 400 V, disc diameter: 355 mm, Exhibition machine for sale – top condition - Designed for precision surface grinding tasks in industrial applications - Maximum rigidity and stability thanks to stress-relieved annealed and hardened cast iron construction Iodpfoxpvxrex Ag Ujtb - High-quality spindle with precision tapered roller bearings (runout accuracy 2 µm) - Electromagnetic chuck for securing workpieces, including automatic demagnetization function - Automatic central lubrication system for all guideways and spindles - Hand-scraped and Turcite-B-coated V-flat guideways ensure extremely smooth, low-friction movement and highest precision - Halogen work lamp: dustproof, fully touch-protected, and protected against water jets according to IP65 - A second grinding wheel flange is included in the delivery AD 5 automatic feed control The FSM series models are equipped with an automatic feed control (AD 5). Various grinding cycles are available: surface grinding with infeed at the starting point, slot grinding with infeed at the starting point, and slot grinding with infeed at both the start and end points. The infeed of the grinding wheel can be individually configured depending on the workpiece. The total grinding dimension is divided into rough and fine infeed steps, which can be freely programmed with a minimum increment of up to 0.001 mm, depending on the application. The system also allows dwell times after a defined number of infeed steps and spark-out passes after reaching the grinding dimension, ensuring optimal grinding results.

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,000 mm, loading space width: 2,430 mm, loading space height: 2,300 mm, loading space volume: 50 m³, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, KEMPF SKM 36/3 AK | 3-Axle Aluminium Tipper Semi-Trailer 50m³ | New Vehicle Delivery date: approx. January 2026 Vehicle Data Manufacturer: Fahrzeugbau KEMPF GmbH * Model: SKM 36/3 AK * Design: 3-axle tipping semi-trailer with aluminium box body * Target country: Germany * Permissible gross weight: 36,000 kg * Axle load: 3 × 8,000 kg * Fifth wheel load: approx. 12,000 kg * Nominal coupling height (loaded): approx. 1,200 mm (technically possible 1,200–1,260 mm) * Load length: approx. 9,000 mm * Load width: approx. 2,430 mm * Body height: approx. 2,300 mm * Body volume: approx. 50.3 m³ * Overall height: approx. 3,710 mm up to loading edge (loaded) ---Paintwork / Design Chassis: Deep black RAL 9005 * Attachments: hot-dip galvanized and powder-coated black * Axles and wheel hubs: black (KTL-coated) * Body: White aluminium RAL 9006 * Tarp: Silver no. 911 (Mehler) * Contour marking (side white, rear red) in accordance with EC directives ---Chassis and Running Gear Frame: High-quality welded construction from fine-grained steel, conical offset (approx. 80 mm) * Axles: SAF INTRADISC plus Integral | Off-road version, disc brakes Ø 430 mm * Lift axle: 1st axle, fully automatic lift, forced lowering in unloaded state * Air suspension: air suspension units with small air bellows (300 mm), plastic covers * Air reservoirs: aluminium version * Support legs: 2 aluminium drop-down legs, max. 24 t (2 × 12 t) * Mudguards: PVC half-shells with rigid spray suppressors * Toolboxes: 2 pieces, PVC, black, approx. 660 × 500 × 460 mm each * Side underrun protection: right side * Ladder: removable, aluminium, approx. 4,000 mm long * Access ladder: extendable at the rear (not UVV) ---Underrun Protection and Rear Foldable steel underrun protection according to ECE R58.03 * With spring-assisted lifting and integrated towing eye * Full-length KEMPF mudflap with large reflective plate (200 × 1,130 mm) ---Lighting and Electrics Fully LED version according to ADR standard * Marker, position, reversing, and rear fog lights in LED * 2 LED working lamps (left/right) * Cargo area lighting with switch and indicator * 15-pin electrical connector * Round lights with chrome rings * Without reversing camera ---Tyres Rims: Alcoa Ultra ONE aluminium wheels, Dura-Bright EVO, ET 120 * Tyres: 385/65 R 22.5, make at Kempf’s discretion ---Brakes and Safety Electronic Braking System (EBS) Wabco with RSS (Roll Stability Support) * ABS 4-channel (4S/2M) * Parking brake via spring cylinder * Axle load indicator via EBS-CAN bus (display in cab possible) * Trailer information module SmartBoard (Wabco) * Tyre Pressure Monitoring System (TPMS/RDKS) as per ECE R141 ---Hydraulics Hydraulic front tipping cylinder (Hyva), operating pressure 190 bar, single-circuit hydraulic system * Smallest piston hard chrome plated * Hydraulic connection: Edbro 1" screw coupling ---Body / Tipping Body Aluminium rear tipper body made with hollow profiles * Front wall sloped 20°, approx. 5 mm thick, with robust supports for front cylinder * Floor approx. 7 mm thick, annealed aluminium * Side walls made from aluminium hollow profiles, continuous 2.5 mm internal wall, welded * Rear wall straight, swinging, double-winged (2/3 left, 1/3 right), automatic pneumatic locking * Rear wall control: left switch (swing function), right switch (door function) Isdpfxoxn Eb Hj Ag Ujtb * Grain-tight design * Slide: approx. 400 × 400 mm, lever-actuated to the left * Dust sack with adapter frame (hopper approx. 250 mm high) * Catwalk with safety r

Condition: new, functionality: fully functional, power: 5 kW (6.80 HP), fuel type: electric, empty load weight: 4,200 kg, Year of construction: 2024, filling bunker with bunker gutter bunker capacity 10.5m³ S355 / St52-3 Iedpfxjuqynms Ag Uetb vibratory feeder with 10mm Hardox 450 wear plate gutter fully stress relieved annealed 2 x imbalance motors 2,5kW NEW

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 10,000 kg, input voltage: 380 V, input frequency: 50 Hz, feed length X-axis: 120 mm, feed length Y-axis: 200 mm, feed length Z-axis: 170 mm, GB-A1500 Fully automatic high-speed bending center Bending length (mm): 1500 Bending height (mm): 4side160 4side170/2side350 4side350 Minimum molding size: (Fold 4 sides) (mm) 4 sides 160: 350*250 4 sides 170/2 sides 350: 350*250 4 sides 350: 350*250 Maximum bending size (mm) 1500*1500 X-axis travel: 120 Y axis travel: 4 sides 160: 200 Itedpfxev Ikvgo Ag Ujb 4 sides 170/2 sides 350 305 4 sides 350: 305 Z-axis travel: 4 sides 160: 170 4 sides 170/2 sides 350: 357 4 sides 350: 357 Pressing knife height: 4 sides 160: 177 4 sides 170/2 sides 350: 177 4 sides 350: 357 Number of axes: suction cup: 11 Pressure arm: 14 Machine power (KW) suction cup: 34.7 Pressure arm: 36.35 Maximum bending thickness of aluminum plate (mm): 3 Maximum bending thickness of iron plate (mm): 2 Maximum bending thickness of stainless steel (mm): 1.5 Maximum bending speed (s/knife) : 0.2 Overall dimensions (mm) long (front) 4 sides 160: 1890 2-4 sides 350 suction cups: 1890 2-4 sides 350 pressure arm: 1890 Width (side) 4 sides 160： 3300 2-4 sides 350 suction cups：3536 2-4 sides 350 pressure arm: 4127 4 sides 160: 2666 2-4 sides 350 suction cups: 2946 2-4 sides 350 pressure arm: 2946 Weight (approx. kg) 4 sides: 160 2-4 sides 350 suction cups: 10000 2-4 sides 350 pressure arm: 10000 1) Machine frame is heaviest welded con struction,stess released by annealing process,this has minimized deflection of the frame. 2) Y Axis full closed loop control 3) Proportional hydraulic compensation system to prevent deformation 4) German HEIDENHAIN linear encoder 5) Taiwan HIWIN ball screw and linear guide rail ,high performance AC Japanese Yaskawa AC servo motors and drives 6) Rich functions CYBELEC/DELEM professional control system 7) Electro-hydraulic servo synchronization module and Greman BOSCH pressure module 8) +/-0.01mm repeat accuracies 9) +/-0.01mm parallelism accuracies

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 Isdpfswf Rgrox Ag Uetb --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A Iodowf Rg Ejpfx Ag Ujtb --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 Iedswf Rgxspfx Ag Uotb --> Cooling type: F --> Protection class: IP 23

Condition: good (used), FOBA DP 15 Marking Laser The FOBA DP 15 laser marking system uses a fiber laser with a wavelength of 1064 nm and a lens focusing of f=254 mm (254 mm focal length). This combination enables the "all-round laser" to permanently and sharply mark materials such as metals and plastics. The 1064 nm wavelength is well absorbed by many materials, making it suitable for annealing, color change, or material removal. Application: The fiber laser is a versatile "all-round laser" for marking industrial products. It is ideal for metals and a wide range of plastics. The technology enables permanent, legible, and precise marking. How it works: The laser beam creates a focused spot of light that penetrates the material. Depending on the material and settings, various effects can be achieved, including: Annealing: A color change of the material through heating. Ijdpew U T Ebofx Ag Uotb Color change: Creating a color contrast on the material. Material ablation: Removing material to create a depression. Details: Device: FOBA DP 15 Laser Marking System Laser Type: Fiber Laser Wavelength: 1064 nm Focus Length (f): 254 mm (equivalent to 10 inches) Find more items - new and used - in our shop! International shipping costs upon request!

Condition: excellent (used), Sat B2599A Drawer oven 130 °C If very different products or product parts with equally different annealing times are to be treated independently of each other in the smallest possible space, drawer ovens are the smartest ergonomic solution. Oven data Manufacturer: Sat Model: B 2599 A Type: 1000T Type: Drawer oven Outer dimensions of the furnace width with control cabinet: 2500 mm depth: 1700 mm Height: 2250 mm Usable volume in each drawer width: 1200 mm depth: 850 mm Height: 170 mm (measured 178 mm) Maximum working temperature: 130 °C Temperature homogeneity in the usable volume, when stabilized : +/-3°C at 80°C Frame : The basic structure consists of a non-alloyed steel beam structure, on which the external lighting made of non-alloyed steel is painted in RAL 1013 (pearl white). The furnace inner casing is made of aluminized steel sheet. Insulation between the two furnace housings (inner/outer housing) is provided by 120 mm rock wool. Floor: Same as the furnace walls, with 120 mm thick thermal insulation. Height (from factory floor to I. drawer): 800 mm +/100 mm adjustable by the furnace feet. Openings: 3 drawers, height 250 mm, for a usable load of 120 mm height. Maintenance doors : 2-leaf maintenance door on the back of the oven. Secured by screws. This door allows complete access to the inside of the furnace. Ijdpfx Ajim Ik Ssg Ustb Parts handling: The handling of the parts is ensured by 3 drawers (one above the other). Height between each drawer : 250 mm Usable height per drawer : 170 mm, with almost 10 mm reserve. The drawers are smooth and equipped with a locking piece at the bottom of the drawer to reduce heat loss when opening. Each drawer has a useful load capacity of 120 Kg with load distribution over the entire surface. Load peaks up to 240 Kg can be supported. The drawer seals are made of silicone. The locks of each drawer are ensured by electromagnets and controlled by the Siemens system. Timing of the minimum preheating time with a timer per drawer (located in the electrical cabinet). Timing of the maximum preheating time with one timer per drawer (located in the electrical cabinet). One temperature indicator is provided per drawer. These indicators will be located on the front of the furnace, to the left of the drawers. More industrial furnaces in other sizes - new and used - you can find in our store! International shipping costs on request!

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Equipment and technical specifications: Maximum professional configuration, optionally with Tersa or spiral cutter block Equipped with TERSA cutter block for tool-free, second-fast planer knife changes TERSA planer knife system allows for exceptionally quiet operation Helically serrated steel infeed roller for consistent and uniform material feed Material feed with two speeds, powered by a separate motor Extra-long surfacing tables for easy and precise dressing of workpieces Itodpfsw Rhkqex Ag Ueb Work tables made from annealed and stress-relieved cast iron, robust and permanently flat Simultaneously rearward-opening surfacing tables for minimal setup times Thickness table adjustment via handwheel with numerical height display High machine weight ensures maximum precision and vibration-free operation Powerful industrial motor Robust steel/cast iron construction Chip removal starting from 0.2 mm (at minimum workpiece thickness of 3 mm) due to helically serrated feed roller (ideal for economical planing of precious hardwood) Quality – Made in Europe Equipment details: Tersa cutter block No adjustments or screwing required Blade changes in seconds Self-locking Exceptionally quiet operation Material feed: Helically serrated steel infeed rollers for consistent wood feed without markings Multiple teeth engage simultaneously for powerful feed Wear-free compared to rubber infeed rollers Permanently mounted extraction hood: With the fixed extraction hood, there is no need to change the extraction hose during retooling This saves valuable working time Simultaneous opening of surfacing tables: Both surfacing tables can be tilted up together, spring-assisted, for fast and convenient conversion to thicknessing mode in seconds Thickness table adjustment: FS 41 elite s with thickness table adjustment by handwheel and integrated indicator The thickness table is guided on four large-dimensioned spindles providing maximum stability in all operating conditions. A special lifting device keeps the table position perfectly stable even without locking. Anti-kickback devices: Massive anti-kickback devices prevent kickback of workpieces The 4-knife cutter block ensures optimal planing results Anodized aluminium surfacing fence: Large size (1200 x 150 mm) Easily adjustable Tiltable from 90° to 45° with scale Supplied with auxiliary fence for safe planing of narrow workpieces Digital version: With electric thickness table height adjustment and digital display Scope of delivery: Jointing/edge fence with round bar guide 2 feed speeds Tersa cutter block Technical Data Overall surfacing table length: 2200 mm Surfacing infeed table length: Surfacing table height: Surfacing working width: 410 mm Surfacing maximum cutting depth: 5 mm Surfacing fence dimensions: 1200 x 150 mm Surfacing fence tilt range: Thickness table dimensions: 775 x 410 mm Min. thicknessing height: 3 mm Max. thicknessing height: 240 mm Min. thicknessing workpiece length: Thicknessing feed speeds: 6 / 12 m/min Cutter block speed: 5000 rpm Cutter block diameter: 95 mm Number of planer knives: 4 pcs. Electric...

Year of construction: 2018, operating hours: 200 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 908011821811131, The oven was purchased for annealing aluminium parts but can also be used for powder coating curing. The equipment is lightly used with less than 200 operating hours. Maximum achievable temperature: 350℃ (temperature is adjustable as required). Dimensions: 2x2x2m. The unit is equipped with a hot air collector and exhaust via a ventilation duct. Specially adapted transport trolleys are included. Isdpfex H Rxwex Ag Uotb

Year of construction: 2024, condition: new, Control unit - with NC control Conical bending device Side roll positioning electronically synchronized via PLC Safety mechanism for welding (welding possibility) on the machine Machine body made of stress-relieved annealed steel 4 roll drive system - upper, and lower roller with hydraulic motor driven synchronized via planetary gear (ᐳ 430 mm) Electrical and hydraulic protection against overloads Hydraulically adjustable lower roller pressure Hydraulic roller brake, prevents the sheet from slipping back Hydraulic swinging out of the upper roller bearing, for easy removal of the formed sheet Safety wire Induction-hardened rollers (HRC 54), crowned ("crowning"). Variable speed Bending length: 2050 mm Bending capacity: 13 mm (d x 5) Bending capacity: 10 mm (d x 1.5) Top roll: 230 mm Bottom roll: 210 mm Maximum roll width: 30 mm Length: 3830 mm Width: 1160 mm Height: 1200 mm Motor power: 11 kW Weight: 4700 kg Iodpfjdzzyfex Ag Uetb