Used Melting Furnace for sale (1,136)

Condition: good (used), Foundry4 Dosing Furnace TD1400DC Aluminium Melting Furnace Melting Furnace 850°C Capacity 1,400 kg Heating power 22 kW 4 units in stock Bodpfoxt Habex Abbjlr

Year of construction: 2015, condition: new, rotary drum dimensions: length: 6000 mm inside: Ø 1600 mm outside: Ø 2280 mm max. temperature: 1200 ° C heating: gas eating power 2700 kW melting capacity: 6000 kg / h The plant consists mainly of: - furnace - hydraulic power pack and tilting mechanism - heating system - carousel with molds Bledpfx Abjcmxziobsr - charge box - measuring and control system

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: Seriennr.: 4046, Equipment: documentation/manual, Ingot casting belt 600 Zinc melting furnace ZSO 600 / 700 B Bljdpju S N Ahefx Abbor

Condition: new, 7 pieces heating coil new for a melting furnace Fulmina SOU 20E, Technical data: Reversible element with connection ends Ø 10 x 270 mm power: 10.000 Watt Voltage: 220 Volt cold resistance: 4,60 (± 5%) Ohm wire diameter: 4,50 mm Bjdpfxsd Tx A Ej Abbjlr coil inner Ø: 29 mm leg length: 240 mm Number of legs: 3 x 8 pieces Wire quality: CrFeAl Y 3 heating coils are a complete set in this model (the pictures of the melting furnace serve the representation and show the model in which the heating coils were installed, they fit however also into other models with smaller or higher achievement, it changes only the number of pieces) immediately available from stock

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Foundry electric induction melting furnace for melting of: - Steel - iron - aluminum - copper - brass - Bronze TECHNICAL DETAILS Nominal power: 1 ton Temperature: 1700 °C Transformer capacity: KVA 800 Year of manufacture transformer: 2014 High voltage: 10 +- 2 x 2,5% kV Bodjlxnlfopfx Abbelr current: 41,86 / 38,97 - 23,89 A Low voltage: 840 - 105 V Current: 464 - 275 A EQUIPMENT / SCOPE OF DELIVERY Hydraulic tilting Water cooling system

Condition: reconditioned (used), Melting and casting furnace for aluminum and ZnAl. The furnace is after a general renovation, new lining, specialized painted, functional. The furnace capacity for aluminum is approximately 3,000 kg. Suitable for melting with a gas, oxygen or oil burner. Bedpfxoh Nycas Abbelr

Condition: used, Heated Chocolate Mixing Tanks Qty 2 available Stainless steel Bsdpsxtqx Uofx Abbolr

Condition: excellent (used), Furnace for Drying and Quenching of Ferrous Metals with Siemens Control & Electrical Cabinet Bledpfx Abjx Ahyuobor

Condition: like new (used), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, As new! Used for only 15 production days. Hot Air Furnace — Capacity: 2,000,000 kca This unit is in excellent condition, practically as new, with only 15 days of operation. Ideal for industrial heating or drying applications. Blodoxq Rv Iopfx Abber For more details or photos, please contact us.

Condition: like new (used), Chanber size: 280x180x500mm upper 280x130x450mm lower Bloded Sm Diepfx Abbor Max temperature: 700 C °

Condition: new, Year of construction: 2025, An active lime production line is a set of equipment designed to produce high-quality lime from limestone, with the aim of meeting various industrial applications, such as in the production of steel, environmental desulfurization, and other processes. The process typically involves several stages, including limestone crushing, calcination, hydration, and finally, the production of active lime. Here is a general overview of the main steps involved in an active lime production line: 1. Limestone Quarrying: - Raw limestone is extracted from quarries and transported to the lime plant. The limestone may undergo crushing and sizing processes to achieve the desired particle size. 2. Limestone Preheating: - The raw limestone is typically preheated in a preheater or precalciner before entering the rotary kiln. This preheating step helps to reduce the energy consumption in the kiln by partially decarbonizing the limestone. 3. Loading into the Rotary Kiln: - The preheated limestone is loaded into the rotary kiln, a large, rotating cylindrical furnace. The kiln is inclined at a slight angle to facilitate the movement of materials through the kiln. 4. Calcination: - In the rotary kiln, the limestone undergoes high-temperature calcination (typically in the range of 900 to 1,450 degrees Celsius). This process causes the limestone to undergo chemical and physical changes, converting it into lime (calcium oxide). 5. Cooling: - After calcination, the lime moves through the cooling zone of the kiln, where it is cooled down. This cooling step is essential to stabilize the lime and prepare it for further processing. 6. Hydration: - The quicklime produced in the kiln is then slaked with water in a hydration process to produce slaked lime (calcium hydroxide). This is typically done in a separate hydrator. 7. Separation of Unreacted Lime: - The slaked lime is separated from any unreacted quicklime or impurities. This step ensures that the final product is of high quality. Blsdpfoq Nyzbsx Abber 8. Filtering and Drying: - The separated slaked lime is filtered to remove excess water, and the resulting product is dried to achieve the desired moisture content. 9. Storage and Packaging: - The final product, active lime (calcium oxide), is stored in silos or other storage facilities. It can then be packaged for sale or transported to end-users. 10. Environmental Considerations: - Dust collection systems and other environmental control measures are often implemented to minimize emissions and ensure compliance with environmental regulations. The design and configuration of an active lime production line can vary based on factors such as the type of limestone used, production capacity requirements, and specific industrial applications. Modern production lines often incorporate advanced technologies to optimize energy efficiency, minimize environmental impact, and ensure high-quality active lime production.

Condition: used, Savage Bros Chocolate Melting Tank Product temperature control Kettle temperature control Blsdpfxjxtqvgj Abbjr Agitator Stainless steel

Condition: excellent (used), SLM Solutions Model: SLM 280 HL For sale is a professional metal 3D printer SLM 280 HL by SLM Solutions (Lübeck). The machine comes from industrial use, is fully documented, and is delivered including nameplate data and technical documentation. The SLM 280 HL is designed for 24/7 operation and is suitable for aluminum, stainless steel, tool steel, cobalt-chromium, and many other metal powder materials. Included modules and accessories: - AMC 330 WB Air Management/Filter Module - HRS050-AF-20-M Chiller Unit - DC 1.5 KAESER Compressor / Compressed Air Module Technical Data (Excerpt) Machine Weight: 1,245 kg Dimensions (without accessories): Width: 1.7 m Height: 2.0 m Depth: 1.1 m Build volume: 280 × 280 × 250 mm (optional depth 350 mm) Electrical connection: Power consumption: 15 A Building-side protection: 32 A Control voltage: 24 V DC Heating power: 1,200 W Protection class: IP50 Power input: 4.7 kW (single optics) / 8.0 kW (twin optics) Media supply Argon Operating pressure: 6 bar Flow rate (purge): approx. 130 l/min Flow rate (build process): approx. 3 l/min Quality: DIN EN ISO 14175 – Class 4.6 (≥99.996 %) Compressed air Operating pressure: 6 bar Flow rate: without nitrogen generator: approx. 100 l/min with nitrogen generator: approx. 500 l/min Quality: ISO 8573-1:2010 Class 1:4:1 Cooling water Medium: distilled water Primary circuit: Pressure: 4 bar Flow rate: 0.3 l/min Supply temperature: 18–20 °C Secondary circuit: Min. pressure: 2 bar Max. temperature: 40 °C Volume: 1.7 m³/h pH value: 5.8–7.0 Operating conditions Ambient temperature: 20–25 °C Max. relative humidity: 60 % Designed for continuous (24 h) operation (Weight approx. 1,245 kg). Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of supply: (see picture) - SLM 280 HL machine - Control cabinet - Process chamber - Internal control panel with screen - Available documentation, parts lists, manuals Bedpex Agt Hofx Abbslr (Subject to changes and errors in the technical data!) We will be happy to answer any further questions by phone.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 3,600 mm, total width: 2,100 mm, • Model: RC 200 • Year: 2014 • Condition: Used – very good. • Glas surface to be used: 210 x 360 cm • Glass thickness from 4 mm up to 19 mm. • Has been running 1 to 2 days pr. week since 2014. Is as new inside • Regularly serviced and maintained – 2 yearly services performed by professional technician Bedpfex Avquox Abbolr • High output oven. Output can be adjusted with about 20% . Cost approx. 20.000 Euro • Full documentation and manuals included • Buyer is responsible for dismantling, loading, and transport

Condition: good (used), Gebhardt Q2M-P2B6N-PAC RD centrifugal fan 20000 m³/h Gebhardt Q2M-P2B6N-PAC RD Centrifugal fan 20000 m³/h 7,50 kW n max: 1782 t max: 250 p: 1,200 Motor Siemens UD 0705/1082878-016-1 Bjdpfx Absicav Dsbslr 400/690 V 50 Hz 7,5 kW 8,6 kW 60 Hz 1160/min Dimensions. Height without motor = 64 cm Height with motor = 95 cm width = 102 cm Depth = 102 cm Weight approx. 280 kg

Condition: used, Electrically heated tempering furnace with protective atmosphere Bljdpfoxcphmex Abbor Type: TSK-8-10-12-80 Temperature: max. 950°C Internal dimensions (W x H X D):800 x 1050 x 1200 mm Heating power: 80 kW Atmosphere fan: 4,0 kW

Condition: excellent (used), Annealing furnace Make Naber Type 41 S Blsdpfx Aborwfqnjbjr 12 kw YEAR OF MANUFACTURE 1972 Dimensions of the annealing chamber : width 350 mm height 220 mm depth 500 mm Transport dimensions : Length 1350 mm Width 850 mm Height 1560 mm with pallet Weight 320 kg

Year of construction: 2014, condition: excellent (used), Oven volume: 2.366 m³ l Max. temperature: 750 °C Connected load: 84 kW Weight: 3.7 t Bedpfox A Dl Tox Abbelr

Condition: used, Nabertherm Nabertherm N 2260/S Chamber Furnace with Wire Heating up to 1300 °C Technical Specifications – Nabertherm N 2260/S Feature / Value Model: Nabertherm N 2260/S Maximum Temperature: 1300 °C Voltage / Connection: 400 V, 3~ (three-phase current), PE (protective earth) Heating Power: 75 kW Heating Zones: 5-sided (sides, floor, door, optionally ceiling) Internal Dimensions (Firing Chamber) Dimension / Value Width: 1,500 mm Depth: 1,000 mm Height: 1,720 mm Volume: approx. 2,580 liters External Dimensions (Complete Unit) Dimension / Value Length: 2,000 mm Width: 2,250 mm Height: 2,850 mm Weight: approx. 3,100 kg Bodpfew Ec Egsx Abbelr Condition: used Scope of delivery: (see photo) (Subject to change and errors in technical data and information!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 2001, Vacuum tempering furnace Manufacturer: BMI Bledpfx Abovcyf Tober year of construction 2001 Maximum temperature: 750°C Year of construction: 2001 Batch size: L X W X 1200 X 600 X 600mm Heating: Electric Heating capacity 100 KW

Year of construction: 1992, condition: used, max. temperature 1100 Grad size of opening ca. 250 x 120 mm depth of chamber ca. 290 / 310 mm heating capacity 2,7 kW control "Thermocomputer TC 5040" Bodpfsw Rrf Sex Abbelr

Year of construction: 1988, condition: as good as new (ex-display), machine/vehicle number: 1116/87, MANUFACTURER: ELTERMA/IPSEN MODEL: VDFC-413 DESCRIPTION: Vacuum tempering furnace YEAR OF PRODUCTION: 1988 Bjdpfxom E Tvhs Abbelr STATUS: New unused, need revamping of the obsolete parts ( Cabinets ) Max Load Dimensions: 610x900x500mm Max Load Weight: 500 kg Working temperature: 150-750⁰C Approximate warm-up time of the vacuum chamber at 550 ° C for 30 minutes

Year of construction: 2010, condition: excellent (used), controller manufacturer: SIEMENS, controller model: S7-1500, temperature: 250 °C, year of last overhaul: 2021, CONTROLS .. electronic controls SIEMENS S7-1500 CHARACTERISTICS HEAT TREATMENT EQUIPMENT .. temperature max.: 250 °C HEAT TREATMENT COMPARTMENT / ZONE .. heat treatment process: tempering .. heat treatment medium: water Bedpfx Asxyvy Rebbjlr .. temperature max.: 250 °C .. length: 8000 mm .. width: 4300 mm .. diameter: 4300 mm DIMENSIONS / WEIGHTS .. space requirements -left/right-: 15000 mm .. space requirements -front/back-: 6300 mm .. total height: 6600 mm .. height above floor level: 5500 mm .. height under floor level: 1100 mm .. total weight approx.: 60000 kg ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz Electrically upgraded in 2021 (Siemens). - Has an aviation and aerospace certification. - Complete documentation of all calibrations - Monitoring system for temperature and pressure zones Operating temperature: 250 °C Operating pressure: 12.5 bar Operating hours: - Vacuum pump: 9,132 h - Fan: 15,497 h

Condition: used, SLM Solutions Type: SLM 500 Build space (L x W x H): 500 x 280 x 365 mm (minus substrate plate height) 3D optics configuration: Quad (4x 700 W) Build rate: up to 345 cm³/h Variable layer thickness: 20 µm - 90 µm, Min. structure size 150 µm Focus diameter 80 µm - 115 µm Max. scan speed: 10 m/s Bledpov Iff Njfx Abbor Average protective gas consumption in the build process: 16 l/min (argon) Average protective gas consumption in the flooding process: 250 l/min (argon) Powder supply with 90 kg Electrical connection / power consumption: 400 volts 3NPE, 63 A, 50/60 Hz, 8-5.5 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 6080 mm x 2530 mm x 2620 mm Machine weight (without / including powder): kg, kg with powder Was operated with aluminum AlSi10Mg! Laser hours: 1689 h Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer a Despatch lab oven. Despatch Laboratory Ovens Bledpfed Nfq Isx Abbjr + 8 "WAFER LCC: Maximum temperature 260 ° C Lockable circuit breakers turn on the control panel for easy maintenance Protocol 3 control with large LCD display, built-in data logging capabilities and USB port for easy oven setup and data export Edelstellenne room with interior seams welded continuously on the insulation side to protect the working space from pollution Programmable door locking prevents the operator from opening the oven door while the cycle is running The door lock switch turns off the heating when the door is open The rolled air flow consists of 100% HEPA (High Efficiency Particulate Air) and is filtered to ISO Class 5 (Class 100) throughout the process cycle The Magnehelic Manometer monitors the pressure drop of the HEPA filter so you know when to replace the filter Electric door unlocking for ergonomic operation UL & C-UL Listed Control Panel Open Modbus communication connection (RS485) for remote monitoring and recording Chamber measure L 350 mm Chamber measure B 350 mm Chamber Measure H 350 mm Maximum temperature 260°C Digital screen Yes Electric connection 230 V Total size L 830 mm Total dimensions B 910 mm Total Measure H 560 mm Type: LCC1-16NV-3 Condition: used/used Delivery: (See picture) (Changes and errors in technical D