10
internal dimension 4000 x 1450 x 1070 mm
Q3otr
max. temperature 900 °C Grad
Blech: 500 - max. 19 000 kg
Stab: 1 000 - max. 9000 kg
machining max. 885°C
condition gut
13
Chamber furnace, hardening furnace, tempering furnace, muffle furnace, nitriding furnace, chamber furnace, annealing furnace, annealing and hardening furnace
J9j2sben
-Machine: can be inspected under electricity and gas, including documents
-Chamber furnace: natural gas heated
-Manufacturer: Hotwork Drewsbury
-Power kW
-Max. Temperature: 900°C
-Internal dimensions: 4450/4200/H1200 mm
-External dimensions: approx. 5500/5500/H2500 mm
-permissible furnace load: 10 tons
-Control: Two-point...
6
pass through height: 100 mm
length: 2200 mm
width: 280 mm
degree: max. 500 °C
voltage: 230/400 V
weight: ca. 580 kg
Total power requirement: 17 kW
dimension machine xH: 2700 x 800 x 1320 mm
Application: Heat treatment in continuous process
Operation via control panel on the E-cabinet
Cavjkiy8eo
Information about the usable space:
- Lining sheet steel heat-resistant with inserts = insulation mats
- inlet: W x H: 280 x 100mm
Cover flap to be opened via manual handle. (2x lifting cylinder)
Transp...
15
Eliog annealing furnace
Here we offer a passable annealing furnace.
Technical data
Temperature range: 70 ... 200 °C
Working temperature: max. 200 °C
Airflow: horizontal
circulating air fan: 4 pieces of 5,5 kW each
exhaust fan: 1 piece a 7,5 kW
Heat output: 396 kW (4 heating groups of 99 kW each)
Connected load: 419 kVA
Nominal voltage: 3 x 400 V; 50 Hz; PE
Protection class: IP 65, IP 20 (heating)
B2lxyp8g
Noise emission: < 70 dB(A)
Door: 2 rolling gates, inner rolling gate with heat-insulated el...
9
Used high chamber furnace, overhaul possible on request
- Tmax 1280°C
- capacity 5000 liters
- Outer dimensions w x d x h 1600 x 2200 x 4000 mm
- Dead weight 7000 kg
- Nominal power 198 KW
- Documentation
Evugvp
Inspection by appointment is possible at any time.
We offer industrial furnaces, which we also rebuild and supplement according to customer requirements.
hardening furnace, annealing furnace, industrial furnace, chamber furnace, firing furnace, baking furnace
4
Electric annealing furnace make NOLZEN type WL 20/16/30
Machine # 3517 Year of construction 1971
Bd9qul
Technical data:
max. temperature 1150°
inner dimensions 200 x 160 x 300 mm
electrical requirement 6,0 kW
power supply 380 V / 50 Hz
external dimensions approx. 600 x 700 x 1000 mm
with
- temperature display / timer
used, in good condition
11
The annealing furnace plant comes from a forthcoming international steel pipes manufacturer dissolution.
Up to 12m lengths, Ø max. 2540mm, and max. 100mm wall thickness.
The complete assembly or a part of the assembly can be taken over at the current location with a fully comprehensive infrastructure.
If you are interested in taking over the existing production, please contact Mr. Weigel.
Requests for individual machines are not yet answered. However, we are compiling a list of interested part...
5
Continuous bright annealing and brazing furnace in protective gas atmosphere (nitrogen and hydrogen); the furnace is NEW, unused, still in its original packing.
- made entirely with fireproof materials
- capacity: cca 50 kg/h net
- furnace capacity: max 1100 degrees C
- conveyor belt: cca 200 mm width
- height of muffletip: cca 150 mm
- door height: cca 100 mm
- heating-length: cca 1.550 mm
- cooling zone length: cca 3.500 mm
- 4 cooling zones
- connected load: cca 34 kW
Ffkxtmk
- supply voltage...
10
Tempering furnace for stress relieving and forming acrylic glass
The furnace has two doors on one side and 2 narrow doors with rail system on the back.
The sheets are hung there and pneumatically clamped with foot switch and released again.
- The oven has a maximum temperature of 230°C and a permanent deviation around the set temperature of +/-3°C at 75°C .
- The internal dimensions are approx. width 1600 x depth 2000 mm.
The height of the oven in the rail system can accommodate a 1800mm high fr...
5
# suitable for treatment under inert gas
# with rapid cooling by fan
external dimensions (w x h x d): 1500 x 1600 x 2500 mm
useable dimensions (w x h x d): 750 x 600 x 1100 mm
Bbaikg3y
temperature: 1200°C
electrical heated: approx.. 42 kW
charge weight: 700 kg
6
Only a few test drives , warranty 24 months
-Slot in the furnace collar, suitable for gassing box (included)
-control of the solenoid valve
-without bottle reducer
-60 liters
-incl. base frame
-with Nabertherm Controller B 400/ 5 programs with 4 segments each
-controller with USB interface (see attachment)
-oven chamber: W x D x H 350 x 750 x 250 mm
-utility room: W x D x H 280 x 600 x 200 mm
-Tmax 1280°C
-with radiation heating
-Power approx. 20 KW
-Documentation
Viewing in our warehouse by ap...
2
Electric annealing furnace make NOLZEN type WL 20/19/50
Machine # 3241
technical data:
max. temperature 1150°.
inner dimensions W x H x D 210 x 190 x 500 mm
electrical requirement 9,5 kW
power supply 380 V / 50 Hz
external dimensions approx. 1050 x 610 x 1630 mm
Bd9xuaay
with
- underframe
- temperature display
used
4
Bogie hearth furnace / annealing furnace
Manufacturer: Aichelin
Type: DWLG 200/150/600
Year of construction: 1977
Furnace and controller unit overhauled in 2018
Heatable up to 750°C
Lifting door electric: 1 piece
Fresh air supply
Temperature logging unit with printer
Bogie hearth rail guided
Control cabinet
Exhaust air hood: 1 piece
Usable interior space:
W x H x D: 6000 mm x 2000 mm x 1600 mm
C2hb0vxc
Temperature up to 600 °C
Batches up to 40 to
3
1 industrial surface hardening furnace Forni & Forni
PULSAR 2.7, year: 2011, with car push-in device, volume: approx. 2.7 m ³, 400 V + N + T, 180 kW, max.
Bdoue8cl78
Operating temperature 1,150 ° C, ALIMENTAZ.: CH4, ABM. approx. 3,000 x 2,200 x 2,500 mm, throat depth approx. 2,000 mm, slot width approx. 1.150 mm, shelf about 1,400 mm,.
3
Glühraum ca. 250 x 150 x 130 H
Pb0oqoox
stufenlos regelbar bis 1200 ° C
1.800 W , 7,5 A , 220-240 V , 50/60 Hz
4
Max. nominal temperature: 1350°C, nominal power: 37kW, weight: 2.8t.
Dztyre
6
Was previously used for lambda probes!
Please tell us your offer price
Sale only within Europe, incl. Turkey
Price without packing; delivery condition: FCA (machine location)
=====
Technical data see handout.
Any warranty right is excluded.
For the correctness of technical data and year of manufacture,
for the completeness of accessories and tooling,
as well as for the adherence to all safety as well as environmental protection requirements specified in the accident prevention regulations, w...
7
Electric annealing furnace make NOLZEN type WS 20/19/45
Machine # 3191 Year of construction 1972
technical data:
max. temperature 650°
inside dimensions 200 x 190 x 500 mm
electrical requirement 3,6 kW
power supply 380 V / 50 Hz
external dimensions approx. 600 x 700 x 1200 mm
with
- temperature display / timer
used, in good condition
Brpmaxr2bv
12
Item condition: Used from stock
Scope of supply: With original documentation
Case: Very good, light scratches
Manufacturer: Weldotherm
Warranty in months: 12
Primary voltage: 400 / 500 V AC
Primary current: 188 / 151 A
Secondary voltage: 0 - 30 - 60V
Secondary current: 12 x 180 A
Frequency: 50 / 60 Hz
Power: 130 KVA
Protection class (IP): 44
Weight: 700 kg
Storage location: Rosenfeld
Zowc372u
Storage place: Field 10-L
8
Continuous belt annealing furnace electrically heated
Plant is in mint condition and can be inspected
be inspected at any time. Plant is at the moment
not completely assembled. For more information please contact us. Annealing furnace suitable for annealing machine components,
small parts, screws 4 mm, length 15 mm, to
rings, washers or similar 15 mm, length 40 mm
weight 3 - 25 g/pc.
The throughputs are for above mentioned or similar
parts.
- at max. 1100°C annealing temperature approx. 100 k...
6
Gas heated annealing and hardening furnace Fabr. SCHNEIDER GmbH Witten Type 6 K
Bw9mhgfrig
Machine # 31 Year of construction 2002
technical data:
chamber size W x D 1200 x 900 mm
in the rear part of the chamber step down depth 500 x height 400 mm
opening W x H 1200 x 470 mm
max. temperature 1300
Connected load 300 kW
Heating medium natural gas
Outer dimensions approx. W x D x H 2200 x 2600 x 2650 mm
weight 5850 kg
with
- manual rope winch MEILI for opening the furnace door
- Attention: without s...
5
roll diameter 520 mm
throat 520 mm
workpiece height 310 mm
cutting speed 25 - 500 m/min
table surface area 600 x 500 mm
band length 3.880 x 3-16 mm mm
Table tiltable up to 15° Grad
work height max. 1000 mm
total power requirement 1,5 kW
weight of the machine ca. 500 kg.
dimensions of the machine ca. 1,3 x 0,76 x 2,14 m
Furnishing:
- Solid gray cast iron table
- Safe working is guaranteed by the large contact surface
- Standard with band welding device, annealing device
- Scissors and sharpeni...
2
- NEW -
- With TERSA cutter block for seconds
Change planer knives
Bn0o3zoiir
- TERSA planing knife system enables particularly
quiet running
- Helical-toothed steel feed roller for
constant and even wood intake
- The particularly long planing tables from one
Piece allow easy dressing of the
Work pieces
- Large planing fence can open when opening
the planing tables remain in position
- Planing tables that open to the rear
- The high machine weight ensures the highest
Precision and smoot...
5
Here we offer a knife coating system.
The knife coating system consists of:
1 electrically driven circular conveyor system FA. Jada type F40,.
2 electrically heated furnaces for temperatures up to 150 ° C,
1 small cooling housing to cool down before diving 2.
2 electrically powered lift tables,
1 electric heated tempering furnace for temperatures up to 200 ° C.
1 long shroud for rear cooling,
2 racks for storing 2 blades (customer supplied) to feed
and removing the blades (the exact implementat...
- Offer number: 13/102
- Microwave Muffle Furnace Ashing Oven
- Hardening furnace, muffle furnace, nitriding furnace, microwave muffle furnace,
Ashing furnace fast ashing furnace, laboratory furnace
- Phoenix Microwave Ashing System
- Manufacturer: CEM
- Model: Phoenix Airwave Unit
- 220-240V 2450Watt
- Max. Temperature 1000°C
- Serial number 905310
Bhykayn
- Dry ashing of foodstuffs, animal feed, grain goods, etc.
- Structure determination of filling materials
- Melting and fusion digestion
-...
3
New machine
Year of manufacture: 2022
Equipment and technical data:
Maximum equipment for the professional with a choice of Tersa or spiral cutterblocks
With TERSA cutterblock for changing planing knives in seconds
TERSA planing knife system enables particularly quiet running
Diagonally toothed steel infeed roller for constant and even material infeed
Material feed with two speeds via separate motor
The extra long dressing tables allow easy and precise dressing of the workpieces
Working tabl...
2
Gas annealing furnace open on both sides make BOYEOFEN A. Blank & Co Siegen/Schofploch
type SWG 45-10-25, make # 12404 year of construction 1976
Technical data:
max. temperature 900°
max. gas consumption 3 m³/h
passage 550 x 120 mm
power connection 220/380 V
with
- automatic door opening and closing
used, in good condition
Vniqxt0p7
15
Hardening furnace, muffle furnace, nitriding furnace, microwave muffle furnace, incineration furnace, microwave high-speed incinerator, laboratory furnace
-Melting and melt digestions z. B. for elemental analysis
Ql30bmfnm
-Drying, annealing and heat treatments
-Max. Heat: 1200 ? C
-Microwave
-Menu control
Interfaces
-Dimensions interior: 250/110 / H80 mm
-Transport dimensions: 600/460 / H490 mm
-Weight: 50 kg
4
drive power: 1.5KW
Net weight: 410 kg
Iqtlb9c
Saw band speed: 20-1000m/min
Dimensions LxWxH: 940x675x1840mm
TECHNICAL SPECIFICATIONS Max cutting height 255mm Saw band speed(s) 20 – 80; 250 – 1000 m/min Saw band length 3140mm Saw band width 16mm Projection 396mm Table length 550mm Table width 600mm Table load max. 150kg Working height 1000mm Table swivel range for miter cuts 12 / 15° Table swivel range forwards and backwards 8 / 8° Saw band welder power 16mm Diameter impeller 408mm Sound pressure...
10
We offer here Trumpf Hüttinger induction generators.
Trumpf Induction Generators
TRUMPF Hüttinger induction generators are the ideal solution for induction heating and heat treatment.
The spectrum ranges from classical induction heating and heat treatment applications such as hardening, annealing, soldering, melting
and forging to special applications such as epitaxy and crystal growth using the Czochralski process.
The TruHeat MF Series 3000 / 5000 / 7000 is a family of powerful MF generators i...
6
Brand: Ideal.
Type: BAS 050-01.
Flash Butt welding Machine.
Band saw blade welding machine.
Manual clamping.
Annealing timer.
Bowqql0g
Year of manufacture: 2014.
Blade width up to 50 [mm].
Machine in good working condition.
Weld band saw blades for wood or metal.
Primary voltage: 380 – 419 [V] / 50 [Hz].
Connection rating: 4,5 [kVA].
Secondary voltage: 2,6 – 4,4 [V] (in 6 stages).
Upsetting force maximum: 2,2 [kN]
Clamping force: 10 [kN]
Weight: 140 [kg].
Welding range:
Bi-metallic/tungst...
6
Capacitor discharge welding machine MEGATRONIC type CD-1200 / QB 2 / 6P
Capacitor discharge welding with high currents and minimum welding times.
Spot projection welding machine
The CD (Capacitator-Discharge) welding technology works on the principle of transformed capacitor discharge.
Year of manufacture 1993
Very high welding power with relatively small mains connection.
- very short welding times, welding process with current increase and high welding current in milliseconds
- no distort...
15
Sky MU 40 Medium Frequency Generator
Wide range of applications
Soldering
Heat treatment (hardening, annealing, tempering)
Joining (shrinking)
Forming (forging)
Surface treatment (drying, preheating)
Melting
Sealing
Indirect heating
Special solutions (bonding, plasma generation etc.)
Technical advantages
Outer circuit with compact dimensions
Second switchable outer circuit optional (depending on the inverter)
Connection via flexible cables
No demineralised cooling water required
Freely program...
2
for overhead crane operation, built for tempering, only 1500 operating hours -very good condition
-Max. Temperature at full load 800°C
-usable space: W x H x D 1.000 x 1.000 x 2.000mm
-External dimensions: W x H x D 2.500 x 2.500 x 3.500mm
-Payload: 2.000kg
-glow material saucer (on site): max. 1.000kg
-heating: 2 cold air burners with 60kW = 120kW
-Safety cut-off: 900°C
Ohm99
-gas control line included for inlet pressures up to 0,5Bar
-Combustion air supply by means of radial fan
-Control: PLC ...
7
Dimensions and weights
Length approx. 2000 mm
width/depth approx. 1110 mm
Weight approx. 430 kg
Dressing table
Feed table length 1034 mm
chip removal max. 5 mm
Connection suction
Suction port diameter thickness 2 x 120 mm
Thickness
working height min. 3 mm
working height max. 230 mm
Chip removal max. 5 mm
Electrical data
Power drive motor 5 kW
Supply voltage 400 V
Mains frequency 50 Hz
Planing cutterhead
Type TERSA
Number of planing knives 4 pcs
Speed 5200 min¯¹
Max. planing width 410 mm
Feed ra...
