Used Bending for sale (3,284)

Condition: not inspected (used), functionality: unexamined, Year of construction: 1994, machine/vehicle number: 7099, overall weight: 2,000 kg, total length: 5,600 mm, total width: 700 mm, total height: 1,600 mm, TRANSFLURID DB 2060 pipe bending machine - Bending capacity: 20 - 60 mm Hodjz Sprcspfx Abksnu FCA D-35614 Aßlar - loaded onto a truck.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, machine/vehicle number: 7395, tube wall thickness (max.): 8 mm, bending radius (max.): 600 mm, working height: 1,200 mm, overall weight: 9,000 kg, TECHNICAL DETAILS Tube outer diameter: 40–100 mm Maximum tube dimensions: 110 × 5 mm Maximum wall thickness: 8 mm Outer diameter of solid material: up to 70 mm Tube insertion length / usable length: 1,200 mm Maximum bending radius: 600 mm Bending height: 1,200 mm MACHINE DETAILS Dimensions & Weight Hsdpfxez Im Raj Abkjnu Dimensions (L x W x H): 4,000 x 2,600 x 1,400 mm Weight: 9,000 kg

Year of construction: 2020, condition: good (used), functionality: fully functional, machine/vehicle number: 2020-09-B970, High-quality compact bending machine Dynobend TM 02 – in top condition, including a large tool kit, for sale. Condition & Inspection • The machine was purchased new directly from the manufacturer Dynobend in 2021 and has been in our possession ever since. • It is used but in good condition (see photos for details). • Inspection is welcome: The bending machine is currently powered on and fully functional. After prior appointment, it can be inspected and demonstrated in operation. Application & Scope of Performance • Focus on solid material: The machine was used almost exclusively for bending solid material. It can also be used for bending pipes (with limited application areas). • Control & Programming: Up to 25 individual bending cycles can be programmed – extremely practical and absolutely sufficient for most applications. • Length stop: o The programmable length stop covers 0 to 1500 mm as standard. o By bending on both sides, workpieces up to 3000 mm can be processed. Hjdez Ny Rkopfx Abkenu o Without a direct stop, lengths over 3000 mm are also possible without any problems. Extensive tool kit including additional equipment: • Numerous additional tools were manufactured for the standard tool kit to significantly expand the machine's range of applications (see photos). • The machine will only be sold together with the complete tool kit. Complete documentation available • The sale includes all important and legally relevant documents: • Original EC declaration of conformity (Directive 2006/42/EC, Annex II A) • Acceptance test report • Original operating manual available • Invoices available • The price is ex works (EXW). • Dismantling, professional loading, and transport must be organized by the buyer or carried out by a commissioned freight forwarder. • Technical specifications according to the nameplate and available documents. Subject to prior sale.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 308, table width: 850 mm, table length: 1,250 mm, stroke length: 200 mm, bending force (max.): 42 t, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bending force: 42 t Max. bending stroke: 200 mm Table length: 1,250 mm Table width: 850 mm Ram stroke: 300 mm Ram width: 200 mm MACHINE DETAILS Motor power: 4.0 kW Dimensions and weight Dimensions (L x W x H): 1,500 x 2,500 x 1,800 mm Unladen weight: 1,000 kg EQUIPMENT Documentation Hodpfx Aez Nipcsbkenu CE marking

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg Hnodpfswk Rlxox Abkou

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1980, operating hours: 15,034 h, machine/vehicle number: 1.500, roller (bottom) diameter: 220 mm, roller (top) diameter: 300 mm, working width: 3,000 mm, sheet thickness (max.): 8 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. sheet thickness: 8 mm Max. pre-bending thickness: 8 mm Max. working width: 3,000 mm Number of rollers: 4 Number of driven rollers: 2 Diameter of upper roller: 300 mm Diameter of lower rollers: 220 mm MACHINE DETAILS Drive: Hydraulic Control: Conventional Power: 6 kW Operating hours: 15,034 h Dimensions & Weight Hedpfez Niq Tox Abkonu Dimensions (L x W x H): 7,700 x 2,300 x 1,700 mm Unladen weight: 10,000 kg

Condition: like new (used), Year of construction: 2022, machine/vehicle number: 00031444-ER, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, pressing force: 60 t, stroke length: 275 mm, operating speed: 160 mm/s, reverse speed: 165 mm/s, table length: 1,270 mm, table height: 900 mm, throat depth: 410 mm, oil tank capacity: 150 l, total length: 3,175 mm, total width: 2,100 mm, total height: 2,580 mm, overall weight: 4,320 kg, Equipment: documentation/manual, Manufacturer: ERMAKSAN Model: Speed-Bend Pro 1270×60 Machine type: CNC Hydraulic Press Brake The ERMAKSAN Speed-Bend Pro 1270×60 is a high-precision CNC hydraulic press brake designed for accurate and efficient sheet metal bending. With a maximum bending force of 60 tons and a bending length of 1,270 mm, this machine is suitable for a wide range of industrial sheet metal processing applications. Technical Specifications Maximum bending force: 60 tons (600 kN) Maximum bending length: 1,270 mm Ram stroke: 275 mm Table height: 900 mm Table width: 90 mm Main motor power: 7.5 kW Power supply: 400 V, 3-phase, 50 Hz CNC control: Delem DA-66T (depending on machine configuration) Hedoz Slyqjpfx Abkenu Tool Clamping System: European-style tooling clamping system Side safety guards Foot control: Dual foot pedal Electrical system: Siemens Hydraulic system: Hoerbiger hydraulic system Controller: CYBELEC CYBTOUCH 15PS 2D Upper Tooling (Punch): Rolleri PS 135.85.R08 Machine available from January 16, 2027.

Condition: ready for operation (used), functionality: fully functional, JUTEC Type 3000 with profile bending attachment PB 20 -CE marking -Bending capacity / flat steel 100x8mm -Bending capacity / round material 20mm -Digital angle bending adjustment / display -Material stop -Drive: electromechanical -Control: digital -6 rpm (bending roller) -Tool holder / hexagon 40mm -Foot switch -Documentation Dimensions: L x W x H 0.8 x 0.7 x 1.5 meters / Weight approx. 85 kg Errors and omissions excepted. Hjdpfx Absz S Afpskenu

Condition: used, Roundo PS340 3000 mm Hydraulic Double-Pinch Plate Bending Rolls Manufacturer: Roundo AB Model: PS340 Year: 1983 Country of manufacture: Sweden Type: Hydraulic three-roll double-pinch plate bending rolls Hnedszuzpyspfx Abkou Capacity Maximum working length: 3,000 mm Pre-bending capacity: approximately 12 mm mild steel aximum rolling capacity: approximately 18–23 mm mild steel, depending upon finished diameter Standard upper-roll diameter: 340 mm Plate capacities based upon mild steel of approximately 270 N/mm² yield strength Minimum rolling diameter: approximately 1.1–1.4 times the upper-roll diameter, depending upon material thickness Remaining straight edge after pre-bending: approximately 1.5–2 times plate thickness Features Hydraulic double-pinch design Both lower rolls independently hydraulically adjustable Pre-bending of both ends without removing and reversing the plate Hydraulic rotation of all three rolls Infinitely variable rolling speed Hydraulic powered drop end Portable pendant control Front safety trip bar Heavy-duty fabricated and stress-relieved frame Forged and crowned steel rolls Rolls mounted in heavy-duty roller bearings Suitable for cylindrical and conical bending Approximate machine weight: 14,000–15,000 kg, subject to confirmation Approximate main motor: 22 kW, subject to data-plate confirmation

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, wire diameter (max.): 8 mm, WAFIOS BMU 40 CNC 3D Wire Bending Machine | 2015 | Decoiler | Tooling | Complete Production Cell Complete CNC Wire Bending and Forming Cell WAFIOS BMU 40 CNC wire bending machine | Wire decoiler / pay-off system | Tooling sets | Conveyor and collection system | Safety enclosure | CNC control For sale: a complete used WAFIOS BMU 40 CNC wire bending and forming machine with peripheral equipment and extensive tooling. The machine is designed for automatic production of formed wire components and is offered as a complete production cell. The machine is currently installed together with the wire feeding system, decoiler, finished-part handling equipment, safety guarding and dedicated tooling. The system consists of: • WAFIOS BMU 40 CNC 3D wire bending machine • CNC control unit with operator panel • Handheld operator control • Wire feeding and straightening section • Wire decoiler / pay-off unit • Automatic wire forming and bending section • Finished-part conveyor / collection system • Tooling and forming accessories • Tool cabinet with dedicated tooling • Additional machine tools and accessories • Safety fencing with access gates • Electrical and control equipment Technical Specifications • Manufacturer: WAFIOS AG, Germany • Model: BMU 40 • Machine type: CNC wire bending / forming machine • Number of CNC axes: 3 • Wire diameter range: 3 - 8 mm • Year of manufacture: 2015 • Machine No.: 2 7656 018 • Plan No.: 7656 2 9000 18 • Power supply: 3-phase, 400 V • Frequency: 50 Hz • Rated current: 13 A • Control voltage: 24 V DC / 230 V AC • CE marked Equipment Included • Wire decoiler / pay-off system • Wire feeding and straightening equipment • CNC operator station with screens and keyboard • Handheld control unit • Dedicated forming tools, dies, guides and accessories as shown in the photos • Tool storage cabinet • Finished-part conveyor / collection table • Product collection racks • Safety guarding around the complete production cell • Additional maintenance and setup tools as shown in the photos Technical Condition Used industrial machine from a production environment. The machine is installed as a complete production cell with peripheral equipment and tooling. The equipment is offered together with the accessories and tooling shown in the photos. Additional Information Hjdpjz R Rpbefx Abksnu • Complete production cell available • Extensive tooling and accessories included as shown in the photos • Wire decoiler included • Finished-part handling / collection system included • Safety fencing included • Inspection available by appointment • Sale due to plant closure • All de-installation, loading and removal costs are the buyer’s responsibility Location Koszalin, Poland

Condition: ready for operation (used), functionality: fully functional, Pipe bending machine from Amga. Includes tools. Hedpfx Aez Szfhjbkonu

Condition: excellent (used), Year of construction: 2021, sheet width 1550 mm plate thickness 6.5 mm pre-bending 4.5 mm diameter of upper rolls 150 mm side roll diameter 130 mm diameter of lower rolls 150 mm distance max. OW zu UW 20.0 mm voltage 400 V total power requirement 1.1 + 2.2 kW weight of the machine ca. 2370 kg range L-W-H 3300 x 1150 x 1110 mm Rarely used, according to the previous owner Current new price approx. 25.000 euros Special price upon request (!) Hjdpoz St Rvjfx Abkonu Features: - Electro-hydraulic 4-roll plate bending machine * ??Equipped with a driven top roll and bottom roll * Sturdy welded construction - Application range: * Light to heavy-duty sheet metal processing (steel/aluminum/stainless steel) - Electro-hydraulic adjustment of the bottom and side rolls - Linear guidance for the side rolls - Top roll driven by a robust electric motor and planetary gearbox - Mobile, separate control console - Hardened, crowned rolls (SAE 1050 / CK 45 steel) - Conical bending device - 3-axis digital display for precise roll positioning - Electro-hydraulic drop-end (swing-out bearing) - Operating manual (PDF)

Condition: used, Year of construction: 2001, functionality: fully functional, Profile Bending Machine SAF Curvatrici (TUWI) DS 60 HV – Top Condition & Huge Tool Package Description: For sale is a high-quality profile bending machine, type SAF Curvatrici (TUWI) DS 60 HV, from the first owner. The machine was purchased new by us in 2001 and has been in our possession ever since. It is fully operational and can be demonstrated under power after prior consultation. Special highlight – Modernized control system (08/2019): Hnedpfsz Ix Ukox Abkju The control system was completely overhauled and modernized by a specialist company in August 2019. Now, 10 different feed sequences can be programmed. After a programmed value is reached, the next value is automatically approached by pressing the button again (value input in ascending order). Technical data & equipment: • Shaft diameter: 50 mm (for all three axes) • Acceptance height: 115 mm • Additional equipment from factory: 2 RCD correction rollers for bending angle iron (R/L). The original, lateral and height-adjustable shafts (38 x 250 mm) are also included. • Special modification for transport: Specially manufactured base frame for transport including four height-adjustable support plates. • Additional device for angle iron: A 10 mm thick plate was mounted on the top side. An additional hydraulic cylinder can be attached here, which pushes the vertical flange extremely close to 90° during bending (adjustable pressure depending on the angle). Note: The cylinder is not included in the standard price, but can be requested separately. Enormous scope of supply (Extremely many tools included!): The biggest advantage of this offer is the extremely extensive tool package, which is completely included in the price: • Standard tools: Complete set according to the machine’s scope of supply • 18 different roller sets: According to the list from Ø 8 mm to Ø 33.7 mm • Special tools for angle iron (according to the list) • Special tools for flat steel (light & heavy axis) • Special tools for square and rectangular tubes • Special tools for diagonal square material • Documentation: Original operating manual is fully available Note: The machine will only be sold as a complete package together with the complete tool set according to the attached list. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The disassembly, loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him. Technical specifications according to available documents. Subject to prior sale.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1988, - The machine was purchased new in 1988 and has been in our possession ever since. Hnsdpfxsz Hcp Ne Abksu - The visual condition can be seen in the photos. Considering its age and the existing paint condition, the mechanical condition is satisfactory. - The machine is operational and can be demonstrated by prior arrangement. - The machine has been technically modified. This provides a second, higher speed for processing smaller pipe dimensions. - A protective frame has been manufactured to protect the machine, which helps to minimize external damage. The protective frame also has two mounts that can be used to prepare or mount various profiles. - The control panel has been expanded. As a result, up to 10 set values can now be pre-programmed. - The existing standard tools are included with the machine. All arbor diameters are 60 mm. - The original operating manual is available. - The scope of delivery includes a comprehensive selection of tools for various applications, including: Round tubes Flat bars for heavy and light arbors Square profiles Rectangular tubes T-profiles Angle irons Diagonal tools - A total of 15 pallets of tools belong to the machine (see photos and description). - The machine will only be sold together with the complete set of tools. - The price is ex works. The dismantling, loading, and collection of the machine must be carried out by the buyer himself or by a commissioned forwarding agent. Technical specifications according to available documentation. Subject to prior sale.

Condition: used, functionality: fully functional, Year of construction: 2004, machine/vehicle number: 265040200001, Technical specifications available upon request. Hjdpfszd Hhmex Abkjnu

Condition: like new (used), Year of construction: 2021, Hydraulic 4-roll bending machine Digital display of roll positions Capability to form cones Length: 3050 mm Diameter of upper rolls: 220 mm Diameter of side rolls: 180 mm Bending capacity: 7 to 8 mm with a minimum radius of 1000 mm Machine dimensions: 4700 x 1100 x 1330 mm Weight: 5700 kg Operating videos available upon request. Hedpfx Absz I D Agekonu

Condition: used, Year of construction: 1978, Equipment: documentation/manual, emergency stop, foot remote control, I am offering an electro-hydraulic profile bending machine, purchased in 2012, manufactured by Roundo AB, Sweden, type: R-7S (used, workshop-inspected, and partially refurbished with standard configuration, including vertically arranged bending axes, for sale. It is fully operational and can be demonstrated under power after prior consultation. - Control panel on the swivel arm with joysticks and switches - Digital displays for the two side rollers Significant added value: Extensive tool and profile package included! To be able to handle customer orders in an even more flexible and individual manner, significant investments have been made in expanding the range of tools. In addition to the standard tools, you will receive: • 36 additional rollers for a wide variety of profiles. • Special tool for flat and light-duty profiles up to a height of 500 mm. • Tools for square and rectangular tubes. • Tools for various round tubes Ø (88.9 + 114.3 + 139.7 + 168.3) mm. Hodpoz Nhliefx Abkjnu This machine is designed according to the latest findings in the tube and profile processing industry (as of 2012). The fixed bending roller is equipped with an adjustable slip clutch, which automatically adjusts the speed of the bending roller to the workpiece being bent. The three bending axes are mounted on oscillating roller bearings. A set of complete universal bending rollers for bending angle and T-sections with flange facing inwards and outwards, flat sections upright and lying flat, and square material. The rollers are made of wear-resistant and hardened steel. They consist of three adjustable rings, allowing various profiles to be rolled. Two independently adjustable guide rollers, which can be adjusted fully hydraulically on three different axes. The guide roller unit is equipped with small, interchangeable rollers. This allows asymmetric profiles to be held flat. This is especially necessary for angle sections with the flange facing inwards. Maximum pressure valve to prevent machine overload. Thermal overload protection for both electric motors. Main switch, emergency stop switch, 24 V transformer, equipment according to UVV standards. Multi-button switch mounted on the swivel arm for operating the machine. A set of keys and tools including operating manual in German. In practice, it has been shown that the quality of bending angle steel with the existing standard roller sets leads to limited results. Extensive investment! In recent years, important core components of the hydraulic system have been professionally renewed. The execution of the work is fully documented with existing invoices: • 2021: All hydraulic hoses were completely replaced. • 2022: As part of an oil leak repair, a brand new Bauer hydraulic motor was installed. The total cost for the motor including professional installation amounted to approximately €21,000 net. • Proof is available for the hydraulic motor: Test Certificate for Hydraulic Motors, Certificate of Conformity, Manufacture Certificate, and invoices. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The dismantling, loading and collection must be organized and carried out by the buyer himself or by a freight forwarder commissioned by him. • Technical specifications according to existing documents. Subject to prior sale.

Condition: used, Year of construction: 2021, controller model: , _____ Description: Year of manuf. : 2021 TruBend Center 5030 :- Robust machine frame : - Angular direct drive :- Crowning system :- Machine control with touchscreen operation :- TecZone Fold programming – floating licence :- 2-axis part manipulator with suction modules :- 5-axis backgauge :- Optical angle assistant :- ToolMaster :- Hold-down tools :- OBW90 and UBW90 bending tools Technical specifications Minimum bending depth (standard tool):145 mm Hnodpsz Sw Niofx Abksu Minimum bending depth (with additional hold-down tool):40 mm Maximum bending length:3,123 mm Minimum bending length:80 mm Hold-down force:101 t Maximum box height:220 mm Minimum material thickness:0.4 mm Maximum steel material thickness:3 mm Maximum stainless steel material thickness:2.2 mm Maximum aluminium material thickness:4 mm Rapid traverse Y-axis (press beam):250 mm/s 5-axis backgauge:1,700 mm/s ToolMaster Bend:2,400 mm/s Dimensions and weight:6,500 x 3,150 x 2,995 mm / 26,000 kg Features :- ACB Laser :- DMC Bluetooth 2D barcode scanner :- Set of 3-surface suction modules (12 pieces) :- Support brackets (2 pieces) :- Additional hold-down tool function (ENW) :- Additional bending tool function (ZBW) :- ENW110-50 – Length 3,123 mm :- ZBW400 – Length 940 mm

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, For sale and available immediately: Used PICOT rolling machine Year: 2019 Type: RCS235-30 3 motorized rollers Maximum length: 3100 mm Maximum rolling thickness: 8 mm Hnjdpfx Absz D Suveksu Maximum nibbling thickness: 6 mm Roller diameter: 235 mm Digital roller position display

Condition: good (used), functionality: fully functional, Year of construction: 1997, Well-maintained, used press brake by Jorns Hedpfsz Ru Awex Abkenu Type: Maxi Line 150 SM CNC400A 6 Capacity: 6000 x 1.5 mm Jorns CNC 400A control system

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Magnopro I-Cut 7550” die-cutting machine Hnsdsz I Tguopfx Abkou Item for sale: 1 x Magnopro I-Cut 7550 Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A video recording of a functional test will be made for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: used, Year of construction: 2022, For sale: a CNC bending press, model FICOM PBH-63T/3200, manufactured in 2022, with minimal usage. The machine was purchased new and has seen very little use. It is currently fully operational and connected to power, allowing for inspection, testing, and trial bends. The machine is available on-site and ready for immediate pickup. We have the technical documentation for the machine. Key information: Manufacturer: FICOM Model: PBH-63T/3200 Year of manufacture: 2022 Bending force: 63 T Working length: 3200 mm Controller: ESTUN E21 Controlled axes: X and R axes with NC control Equipment and features: ESTUN E21 controller Automatically controlled X and R axes Hnedsz Aiqzopfx Abkju Quick release system for upper tools Linetech Laser Safe laser operator protection system 85° bending punch and die 30° bending punch and die Technical documentation for the machine Two different sets of bending tools allow the machine to be immediately adapted to different bending tasks. If you have any further questions, we will be happy to answer them.

Year of construction: 2003, condition: good (used), functionality: fully functional, Highly Automated CNC Pipe Bending Cell: Rosenberger RB20 Hjdpfx Aszz Hn Isbkonu Typical Applications The RB20 series is designed for the cold bending of pipes with one or more bends. It is used in industries such as the automotive industry, furniture manufacturing, and plant engineering, where precise, repetitive bends are required. Technical Features and Function Type: ROSENBERGER RB20 (manufactured in 2003) Performance & Geometry: Servo-electric precision drive with a cold bending capacity of up to Ø 20 x 1.5 mm in steel. High flexibility thanks to freely selectable bending planes within the 78 mm die height and generous 3-axis travel ranges (X/Y/Z: 260 × 146 × 1,170 mm) Control Technology: The logic is managed by a robust Siemens Simatic S7-300 PLC, paired with an industrial operator panel from B&R Robotic Automation: Fully automatic handling (loading/unloading) via an integrated Motoman industrial robot, complete with XRC controller and the corresponding teach-in terminal for path programming. Product removal is carried out reliably via a discharge conveyor belt. Marking system (upgraded in 2021): A modern, high-performance VideoJet 1860 inkjet coder (manufactured in 2021) with microprocessor control enables direct product marking (e.g., lot numbers or barcodes) immediately after the bending process System Safety & Peripherals: CE-compliant safety measures via a SICK safety light curtain and a perimeter safety fence. Optical status indication via R

Condition: like new (used), Year of construction: 2023, Technical data: Double bending machine Working length: 8200 mm Bending capacity: 2.5 mm CNC control Sheet metal cutting device Back gauge depth: 1250 mm Bending accuracy: +/- 0.5° Bending range: 140° Multi-zone crowning system Bending die width: 10/20 mm Number of gripper fingers: 9 pcs. CE marking Dimensions (length x width x height): approx. 10200 x 2300 x 2150 mm Weight: approx. 12.5 tons Accessories: Sheet metal cutting device Hodpfezz Adfsx Abkonu Hydraulic unit with oil cooler Bending die lighting Various tools The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty. Condition: overall in new condition

Condition: ready for operation (used), functionality: fully functional, Swivel bending machine, type 2000 x 2-3mm - Bending length 2000mm Hedjz Akc Eopfx Abkjnu - Sheet metal thickness over the entire length 2-3mm - Bending process performed manually - Counterweight Dimensions: L x W x H 3 x 0.8 x 1.5 meters / Weight 1600 kg Subject to errors and omissions.