Used Furnace for sale (751)

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: HWO 1/9-5.2​, - The system is located at the Geberit Keramik GmbH site in Wesel. - The system, including the associated safety technology, performs technical flash firing and re-firing and is prepared for this purpose. - Maximum firing temperature [°C] = 1300 - Current operating temperature [°C] = 1238 - Number of burner groups = 10 - Number of burners = 38 Lodpfx Aezu Nvzokweah - Number of kiln cars = 18 - Number of kiln cars in the kiln = 9 - Current firing cycle [h] = 17 - 23 - Gross energy consumption [kcal/kg] / [kWh/kg] = 785 / 0.912 - Specific energy consumption [kcal/kg] / [kWh/kg] = 1459 / 1.696 - Gas connection capacity [m³/h] = 770 - Usable waste heat [m³/h] = 4000 - Standard loading quantity [pieces] = 900-980 ceramic products Dimensions of the housing: - Length [m] = 14.4 - Width [m] = 6.4 - Height [m] = 5.7 - Volume density [m³] = 146.3 Dimensions of the kiln car: - Effective length [m] = 1.45 - Effective width [m] = 5.2 - Effective height [m] = 2.156 - Track gauge [m] = 1.5 (2x) Special features: In 2023, the kiln was completely overhauled and brought up to the latest state of the art. The following changes were made: - Renewal of the kiln roof: The fiber lining in the upper area was replaced with cordierite stones. - Renewal of the burners, including new nozzles, flame tubes and controllers. - Replacement of the media valves; installation of servo motors on the gas and air lines in front of the burners. - Installation of new software; the Simatec control panel was replaced – control is now exclusively via the PC. - Replacement of the O₂ control system; installation of a Zerox probe; installation of an O₂ analyzer for O₂ correction (to improve energy efficiency by approximately 12–14 %). - The system must be dismantled, packed and collected independently by the buyer.

Condition: excellent (used), Year of construction: 2022, operating hours: 600 h, functionality: fully functional, machine/vehicle number: PO210417, total width: 4,600 mm, total length: 25,000 mm, total height: 3,000 mm, type of input current: three-phase, energy consumption: 1,700 kWh, input current: 2,230 A, The AG series of convection tempering furnaces with forced air circulation (Northglass fifth-generation furnaces, featuring proprietary focused convection technology) was developed to meet the growing customer demand for more efficient low-E glass tempering, improved product quality, and reduced energy consumption. The AG series furnace integrates the advantages of a four-convection furnace, primarily offering benefits in terms of higher productivity, superior product quality, and easier process control. The furnace consists of loading conveyors, a heating section, a convection system (upper and lower), a flat tempering/cooling section, and an unloading conveyor. The equipment package includes air ducts and a device control system. Max. working width: 2,850 mm. Max. loading length: 5,000 mm. Max. glass loading area: 2,850 x 5,000 mm (5-19 mm), 2,850 x 4,600 mm (4 mm). Upper fan convection: 6 fans x 4 kW, lower: 6 fans x 3 kW. Main technical data is attached in a PDF file. Lasdpfxjz Dhm Ue Akwjh

Condition: used, Year of construction: 2010, machine/vehicle number: 1000017741, inner dimension length: 1,000 mm, inner dimension width: 840 mm, inner dimension height: 815 mm, operating temperature: 1,700 °C, usable tank capacity: 685 l, No minimum price – guaranteed sale to the highest bidder! The machine was professionally dismantled and stored. All parts and connections are labeled for reassembly. An on-site inspection is possible at any time. Ledpfx Akoz I Tt Ijweah TECHNICAL DETAILS Furnace chamber and usable space Usable batch space (W × H × L): 840 × 815 × 1,000 mm Total length of the graphite box: approx. 1,100 mm Usable volume: approx. 685 l Operating temperature: max. 1,700 °C Operating temperature under partial pressure: max. 1,500 °C Operating temperature under vacuum: max. 1,700 °C Temperature uniformity: ± 10 K Temperature fluctuation in the steady state: ± 5 K MACHINE DETAILS Process pressure range: 1 × 10⁻² < p < 1,040 mbar Final pressure in the empty, clean, and cold furnace: < 1 × 10⁻² mbar Leak rate: < 5 × 10⁻³ mbar·l/s Power supply: 3 × 400 V, 50 Hz Permissible voltage fluctuation: max. ± 5 % Installed heating power: max. approx. 190 kW Electrical power of the pump station: approx. 14 kW Cooling water flow rate: approx. 150 l/min Cooling water temperature: 20–30 °C Cooling water pressure: 2–4 bar Cooling water quality requirements: according to specification PW 800 943 ND Compressed air for valve operation: 4–5 bar Nitrogen inlet pressure: 5–7 bar Hydrogen inlet pressure: 5–7 bar EQUIPMENT Double-walled furnace chamber made of stainless steel with water cooling Internal graphite box for precise guidance of the process gases Post-cleaned graphite components Automatic control of the entire process Pump station Labeled lines and connections for easier recommissioning Note: Two internal graphite heating elements were damaged during dismantling and must be replaced.

Year of construction: 2006, condition: used, functionality: fully functional, Multi-purpose chamber furnace line consisting of the following components: • Aichelin chamber tempering and stress-relief furnaces VKHLE 4/2-70/85/130 (2 units) • Aichelin chamber preheating furnace VKHLG 4/2-70/85/130 (1 unit) • Aichelin single-chamber continuous furnace DGKS 4/2-70/85/130 (3 units) • Aichelin chamber washing machine EKFG 4/2-70/85/130 (1 unit) • Aichelin loading/unloading trolleys (2 units) • Aichelin table loader storage station (1 unit) • Aichelin transfer table storage station (1 unit) • Aichelin cooling unit storage station (2 units) • Storage stations (30 units) • Charging racks • Spare parts for the line Useful load: Grate length: 1300 mm Grate width: 700 mm Loading height above grate: 800 mm Max. batch weight: gross max. 1000 kg/grate Aichelin chamber tempering and stress-relief furnace VKHLE 4/2-70/85/130: External dimensions: Width: approx. 1820 mm Height: approx. 4050 mm Length (incl. control cabinet): approx. 3300 mm Working height above floor: 1600 mm General data: Maximum temperature: 350°C Operating temperature: 150-200°C Laedoxwn R Nspfx Akwsh Number of temperature control zones: 1 Chamber preheating furnace VKHLG 4/2-70/85/130: External dimensions: Width (incl. control cabinet): 3035 mm Height (overall): 4450 mm Length (overall): 3450 mm Loading height above floor: 1600 mm General data: Maximum temperature: 600°C Operating temperature: 400-500°C Number of temperature control zones: 1 Single-chamber continuous furnace DGKS 4/2-70/85/130: External dimensions: Width (incl. control cabinet): approx. 3400 mm Height (incl. maintenance platform): approx. 5300 mm Length (incl. exhaust hood): approx. 6850 mm Working height above floor: 1600 mm General data: Maximum temperature: 1050°C Operating temperature oven: 750-1000°C Temperature control range oil bath: 60-150°C Gross batch weight at 950°C (max.): 1000 kg Max. gross heating capacity from 25 to 850°C (max.): 800 kg/h Number of temperature control zones in oven and oil bath: 1 + 1 Oil bath volume: approx. 6.5 m³ Cooling capacity oil bath (at 90°C bath temperature): 80 kW Chamber washing machine: External dimensions: Width: 2900 mm Height (above hall level): 4000 mm Length: 3150 mm Loading height: 1600 mm General data: Washing fluid temperature: 50-80°C Spray fluid temperature: 50-80°C Bath volume, washing fluid: 4550 l Bath volume, spray fluid: 4700 l Gross weight incl. batch and washing fluid: 125 kN Loading table: Width: approx. 2200 mm Length: approx. 3200 mm Loading height: 1600 mm Weight (incl. batch): approx. 29 kN Batch cooling stations: Length: approx. 2100 mm Width: approx. 800 mm Height: approx. 4350 mm Loading height: 1600 mm Weight (incl. batch): approx. 20 kN Preparation table fixed: Length: approx. 2100 mm Width: approx. 800 mm Loading height: 1600 mm Weight (incl. batch): approx. 25 kN Preparation table, hydraulically height-adjustable: Length: approx. 2100 mm Width: approx. 800 mm Lift: 1000 mm Loading height: 1600 mm Lifting capacity: 2.0 T Weight (incl. batch): 25 kN The sale covers the entire multi-purpose chamber furnace line. Individual furnaces, systems, or components cannot be purchased separately. The complete chamber furnace line must be dismantled, loaded, and transported by the buyer at their own expense. Inspection appointments can be arranged on request.

Condition: good (used), REF: MM6180 Available as a single lot comprising of 2x Tom Chandley Ltd Ovens and 1x Newsmith Stainless Ltd – Industrial Bread Pan Washer. Technical specification ⚙️ Tom Chandley Ltd – Electric 3-Deck Oven ✅ Manufacturer: Tom Chandley Ltd ✅ Model: Compac (3-deck, 2 x trays per deck) ✅ Voltage: 250V ✅ Power: 5.3 kW per phase (x3 phases) Ledpew Rn Euofx Akwsah ✅ Date Code: 1979 (possibly - date code is 3.2.6.79.) 🗒️ Notes: Stainless steel construction, manual dial controls, single stack on stand with castors. Tom Chandley Ltd – CP MK4 4-8-8 Electric 4-Deck Oven ✅ Manufacturer: Tom Chandley Ltd ✅ Model Ref: CP MK4 4-8-8 (4 x decks, 8 x trays per deck) ✅ Date of Manufacture: January 1998 ✅ Voltage: 400/230V ✅ Phases: 3-phase, 50Hz ✅ Total Load: 61.84 kW ✅ Max Amps/Phase: 90.95A ✅ Largest Single Load: 23.73A 🗒️Notes: 4 decks with 8 trays per deck (32 trays total). Stainless steel, individual deck controls, heavy-duty commercial bakery use. Newsmith Stainless Ltd – Industrial Bread Pan Washer ✅ Manufacturer: Newsmith Stainless Ltd. ✅ Stainless steel construction. ✅ Front-loading with internal rack system for bread pans or trays. ✅ CE marked 🗒️Notes: Requires detergents approved by Newsmith Stainless Ltd to maintain warranty ❗Important: These machines are in the Republic of Ireland and subject to European import/export regulations. Responsibility for collecting/shipping these machines will be with the buyer.

Condition: used, Year of construction: 2009, Year of manufacture: 2009 Curing Furnace Model: Electric Manufacturer: Reinhardt Type: E2 Year of construction: 2009 Working temperature: 50-300 degrees Working space: 0.21m3 Opening size: 650x650mm Voltage: 3x400V Motor: 0.55kW. - Year: 2009 - Power [kW]: 0.6 - Chamber length [mm]: 650 - Chamber width [mm]: 650 - Max. temperature [°C]: 300 Lsdpfx Aozry Ipekweah Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Year of construction: 2024, machine/vehicle number: 8445, functionality: fully functional, operating hours: 3,000 h, power: 80 kW (108.77 HP), input voltage: 380 V, input current: 126 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 750 °C, inner dimension height: 1,000 mm, total height: 4,425 mm, number of chambers: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: CE marking, documentation/manual, We offer this Rohde SG 80/120 nitriding furnace, which is new and manufactured in 2024. Laodpfx Akszuabzjwoh Manufacturer: Rohde Schutzgasofen GmbH Model: SG 80/120 Year of manufacture: 2024 Condition: As new Category ID: 34 Type ID: 4293 Type: Nitriding furnace If you have any questions or need further information, please do not hesitate to send us a message or contact us by phone.

Condition: like new (used), Year of construction: 2008, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 23477, workpiece weight (max.): 550 kg, total width: 1,300 mm, total length: 1,150 mm, total height: 2,800 mm, power: 12 kW (16.32 HP), input voltage: 400 V, usable tank capacity: 150 l, We offer this almost unused Rohde electric chamber furnace, model KEU 150 N SoB, manufactured in 2008. Manufacturer: Rohde Type: Electric chamber furnace KEU 150 N SoB Year of manufacture: 2008 Maximum temperature: 650 °C High-quality programmable control system Bentrop Thermocomputer TC 507 Neatly arranged control cabinet No visible signs of corrosion or thermal damage Industrial special version with extraction/air guidance Complete documentation Laodpfez Ehi Eox Akweh If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2017, functionality: fully functional, number of chambers: 10, fuel type: electric, For sale: WIESHEU Euromat 64 L Baking Oven A professional WIESHEU Euromat 64 L baking oven, Lajdpfxo Adq Ihe Akwsh manufactured in November 2017. This high-quality bakery oven is ideal for bakeries. Specifications include 380-415V 3/N/PE, 50 Hz and a connected power of 16.9-20.1 kW. IP rating: IPX3. Water pressure: 150-600 kPa.

Condition: used, functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 400 V, input current: 45 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,320 °C, inner dimension length: 950 mm, inner dimension width: 500 mm, inner dimension height: 400 mm, overall weight: 900 kg, number of chambers: 1, Equipment: CE marking, documentation/manual, Electrically heated chamber furnace for hardening or preheating forged parts. The furnace is in excellent condition and has seen very little use. Maximum temperature: 1,320°C Power: 30 kW Heating power: 1 control zone, zone 1 = 30 kW Thermocouple: Type S with a diameter of 0.35 mm in the ceramic support tube Laodez H I N Iopfx Akwsh Temperature control: JUMO dTron 304 controller Usable dimensions: 950 x 400 x 500 mm (length x height x width)

Condition: good (used), Year of construction: 2012, functionality: fully functional, Miwe Condo Co 1.0806 Ljdpfxs Adrb As Akweah

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 200.170, functionality: fully functional, operating hours: 1,000 h, power: 18.75 kW (25.49 HP), input voltage: 400 V, input current: 27 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 750 °C, inner dimension length: 750 mm, inner dimension width: 600 mm, inner dimension height: 600 mm, total length: 1,500 mm, total width: 1,400 mm, total height: 1,500 mm, overall weight: 400 kg, number of chambers: 1, number of shelf rows: 1, control type: manual, actuation type: electric, Equipment: CE marking, For sale: ThermConcept recirculating oven due to business closure. Very even temperature distribution in the combustion chamber. Manual control with timer. The oven was operated in production at a maximum of 500°C and is in perfect working order. The door seal is in good condition. Laodpsz Rn Hcofx Akwoh

Condition: used, PROMEOS Gas-Fired Chamber Furnace For sale is a gas-fired industrial furnace with a maximum furnace temperature of 750 °C and a specified rated thermal output of 40–80 kW in total. The system is designed for operation with natural gas or propane and features two burner heads of type ECO 03-40. The furnace is from the year 2016. The last known maintenance was performed in 2021. Equipment and Features Gas-fired industrial furnace system Maximum furnace temperature of 750 °C Two burner heads Operation with natural gas or propane according to technical specifications Electrical connection with 400/230 V Industrial design Technical Data Manufacturer: PROMEOS System Designation: BA 31010.0484.0000 Year of Construction: 2016 Maximum Furnace Temperature: 750 °C Lajdpfxoz Ipcxe Akwsh Burner Heads: 2 × ECO 03-40 Rated Thermal Output: 4 × 10–20 kW Fuel: Natural gas type H, E, and L / Propane Gas Connection Pressure: 50 mbar Propane Consumption: approx. 3.9 m³/h Combustion Air Requirement: approx. 120 m³/h Exhaust Gas Mass Flow: approx. 165 kg/h Air Ratio: 1.35 ± 0.05 NOₓ Emissions at Rated Load: approx. 20 ppm CO Emissions at Rated Load: approx. 10 ppm Electrical Connection: 400/230 V AC, 3L/N/PE Electrical Connection Power: 4 kW Protection Class: IP54 Weight: approx. 4,700 kg Sound Pressure Level: ≤ 70 dB(A) Dimensions of the PROMEOS Chamber Furnace - Width: 2,800 mm - Depth: 2,700 mm - Height including lifting door: 3,400 mm “We offer a suitable bank financing option for your project – all from one source.” You can find more articles – new and used – in our shop! International shipping costs available upon request!

Condition: like new (used), Year of construction: 2023, machine/vehicle number: SN432511, functionality: fully functional, power: 75 kW (101.97 HP), input voltage: 400 V, input current: 108 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,340 °C, inner dimension length: 1,000 mm, inner dimension width: 800 mm, inner dimension height: 1,250 mm, total length: 1,800 mm, total width: 1,900 mm, total height: 2,500 mm, overall weight: 2,800 kg, number of chambers: 1, control type: PLC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, with 12 months warranty -Internal dimensions (w x d x h): 800 x 1000 x 1250 mm -External dimensions (w x d x h): 1790 x 1900 x 2500 mm -Control cabinet (w x d x h): 1200 x 500 x 2350 mm -Controller cabinet (w x d x h): 600 x 900 x 1850 mm -Capacity: 1000 liters -Maximum temperature: 1340 °C -Siemens PLC control system H1700 (100 programs, each with 20 segments) -Nabertherm NCC, computer-aided, extremely user-friendly control system, recording of all parameters. Recordings can be processed, supplemented with batch data, etc., and archived and printed. -Printer and UPS integrated in the controller cabinet -Automatically generated report after each heating cycle -Thyristor-controlled -2 opposing, lockable doors with safety interlock -5-sided heating -Manual air inlet damper -Motorized exhaust damper -Stainless steel exhaust hood with pipe connection flange -Calibrated control thermocouples for the three heating zones Lajdpjzbr U Ujfx Akwjh -Temperature accuracy: ± 15 °C from 500 to 850 °C, ± 10 °C above 850 °C, all values according to DIN 17052-1 in the empty working space, without recording -Separate control cabinet -Audible alarm and alarm light -Overtemperature limiter -Power: 75 kW -Oven weight approx. 2320 kg + control cabinet + controller cabinet -DGUV V3 test currently valid with report -Documentation, CE declaration, circuit diagrams The oven is in TOP condition. It has been used for approximately 10 months in a cleanroom for the production of implants and is of high quality (new price 100,000 EUR net) and absolutely clean. We would be happy to offer installation and commissioning as well as training for your employees. Please contact us! We offer new and used industrial furnaces. Inspection in our warehouse upon request! Chamber furnace, furnace, kilns, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, tempering furnace, enameling furnace, drying oven, industrial furnace, ceramic furnace, tempering furnace, sintering furnace

Condition: used, Year of construction: 2008, machine/vehicle number: 3079241-0010, functionality: fully functional, power: 175 kW (237.93 HP), input voltage: 400 V, input current: 253 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,100 °C, overall weight: 21,000 kg, number of chambers: 2, control type: PLC-controlled, Aichelin VKEs 3-60/65/110 Multi-chamber furnace Connected load: 175 kW Max. temperature: 1100°C Max. load: 650 kg Total weight: 21 t Furnace atmosphere: N2, methanol, NH3, air, natural gas, propane With loading table Lodpex Tup Hjfx Akwoah

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 800 kg, We are offering this very well-maintained Balzer 800 aluminum melting furnace, manufactured in 2008. Manufacturer: Balzer Model: Balzer 800 Year of manufacture: 2008 Laodez Dpy Nepfx Akweh Condition: very good Category ID: 235 Type ID: 1729 Machine type: Aluminum melting furnace If you have any questions or require further information, please feel free to send us a message or call us.

Condition: reconditioned (used), Year of construction: 2022, functionality: fully functional, power: 1,143 kW (1,554.05 HP), warranty duration: 12 months, # NorthGlass BU1E60 Glass Tempering Furnace – Fully Refurbished – 12-Month Warranty We offer for sale a NorthGlass BU1E60 horizontal glass tempering furnace equipped with a forced convection heating system. The furnace is pre-owned and has undergone a comprehensive refurbishment, including the replacement of major mechanical, electrical, and electronic components. Refurbishment work includes the replacement of: - Heating elements - Ceramic rollers - Electric motors - Automation and control systems - Electronic components The furnace has been fully refurbished and prepared for further industrial operation. Warranty: 12 months. ### Main Technical Specifications - Manufacturer: NorthGlass (China) - Model: BU1E60 - Condition: Used, fully refurbished - Maximum glass size: 2,850 × 6,000 mm - Minimum glass size: 300 × 300 mm - Glass thickness: 5–22 mm - Heating system: Forced convection - Convection system: 6 high-temperature upper convection fans with variable frequency control - Production capacity: 16–18 batches/hour (5 mm clear glass) - Heating power: 1,143 kW - Quenching fan power: 2 × 220 kW - Rated electrical capacity: 1,100 kVA - Minimum Low-E emissivity: ε = 0.04 - Quality standard: GB15763.2-2005 ### Supported Glass Types Laedez Rv Dpjpfx Akwjh - Clear float glass - Low-E coated glass - Patterned glass - Body-tinted glass ### Equipment Configuration The furnace includes: - Loading table - Heating section - Flat glass quenching section - Unloading table - Electrical control system - Frequency converters - Air circulation system - Quenching fans with vibration isolation frames ### Key Advantages - Fully refurbished with replacement of major components - Advanced forced convection heating technology - Suitable for processing Low-E glass - Large processing capacity of up to 2,850 × 6,000 mm - High productivity of up to 18 batches per hour - 12-month warranty - Cost-effective alternative to purchasing a new glass tempering furnace ### Price and Delivery Price: Upon request Delivery terms and additional technical information are available upon request. Contact us for a detailed quotation, additional photographs, videos, and technical documentation.

Condition: used, Promeos Industrial Gas Furnace 850 °C For sale is a high-performance, gas-fired PROMEOS industrial chamber furnace, manufactured in 2018. The unit reaches a maximum furnace temperature of 850 °C and has a rated thermal output of 300 kW. According to the available technical data, operation is intended for natural gas types H, E, and L, as well as propane. The furnace features a lift-up door and is suitable for industrial heat treatment and production processes. Technical Data Manufacturer: Promeos Unit designation: BA 31010.0561.0000 Laedpfx Akez Ipuuswoh Year of manufacture: 2018 Max. furnace temperature: 850 °C Rated thermal output: 300 kW Burner heads: 2 × (3 × 40-03 CEO) Fuel: Natural gas type H, E, and L / Propane Gas connection pressure: 100 mbar Propane consumption: approx. 11 m³/h Combustion air requirement: approx. 335 m³/h Exhaust gas mass flow: approx. 453 kg/h Air ratio: 1.35 ± 0.05 NOₓ at rated load: approx. 20 ppm CO at rated load: approx. 10 ppm Electrical connection: 400/230 V AC, 3L/N/PE Electrical connection power: 4 kW Protection class: IP54 Weight: approx. 4,700 kg Dimensions (W × D × H): approx. 3,000 × 3,000 × 3,400 mm (height including lift-up door) Internal/usable space dimensions (W × H × D): 1,500 × 950 × 1,500 mm Usable space volume: approx. 1.58 m³ Last known maintenance: 2021 "All from a single source: We would be happy to offer you suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs upon request!

Condition: excellent (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, The furnace is designed for the tempering of colored, ornamental, and screen-printed glass, as well as clear float glass with an emissivity of over 0.04. According to EN 12150:1 – 2000, for 4 mm thick glass, a success rate of at least 95% is guaranteed, and for glass thicker than 5 mm, a success rate of over 97% is guaranteed. Structurally, the furnace consists of five distinct zones: loading, bending module, heating, cooling, and unloading. When tempering flat glass, the workflow is from left to right: loading – passing through the bending module (which functions as a flat conveyor) – heating – cooling – unloading. When bending glass, the following workflow applies: loading – passing through the bending module – heating – back into the bending module (where the glass is moved transversely along the length of the furnace from left to right while the upper and lower parts of the module gradually conform to the curve to be created) – unloading (in the case of curved glass, unloading also takes place at the entrance). The inlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides. The structure of the heating section is a box-type with a double layer coated with thermal insulation material (perfect insulation performance, low energy consumption, and natural cooling of 15 ℃ / h). Inside the heating zone, there is a conveyor system with ceramic rollers resistant to high temperatures, manufactured by Vesuvius (diameter 48 * Ø85mm, spacing 120mm). Lajdpfsz Ru Iyox Akwsh The heating elements (resistors) are installed on the upper and lower sides of this zone. The resistors are arranged in a matrix with temperature sensors, automatic heating and pause functions to save energy. The upper section has 25 heating elements, and the lower section also has 25. Each resistor has an independent control loop. Outlet conveyor The outlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides.

Condition: used, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 22 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,400 °C, inner dimension length: 400 mm, inner dimension width: 400 mm, inner dimension height: 400 mm, total length: 1,020 mm, total width: 810 mm, total height: 1,510 mm, overall weight: 400 kg, Equipment: CE marking, 2 electrically heated chamber furnaces, manufacturer Thermconcept. Type: KC 64/14 Maximum temperature: 1400 °C Internal dimensions: 400 x 400 x 400 mm (W x D x H) External dimensions: 810 x 1020 x 1510 mm (W x D x H) Volume: 64 l Power: 15.0 kW Current consumption: 22 A Lajdpjzmfvnofx Akwoh

Condition: good (used), Year of construction: 1973, rust size: 700 x 650 x 1.100 mm batch weight: 1.000 kg Temperature: Max. 750 °C Laedpfx Aszvfdqskweh connected load: 78 kW Equipment: Incl. Control system (should be renewed) + Charging machine others: Furnace can be moved under nitrogen

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 9349-0010, functionality: fully functional, Used: rotary hearth furnace / mandrel hardening press Laedew Rrxfjpfx Akweh Manufacturer: Aichelin Model: Drehherdofen Aichelin RDGs 270 Control: Siemens S7-300/317-2 PN/DP Year of manufacture: 2012 Max. temperature: 950 °C GAS

Condition: good (used), Year of construction: 2014, machine/vehicle number: 59 526 05 221 0010, functionality: fully functional, operating hours: 1,000 h, power: 20 kW (27.19 HP), input voltage: 380 V, input current: 33 A, type of input current: three-phase, temperature: 650 °C, inner dimension length: 1,000 mm, inner dimension width: 600 mm, inner dimension height: 600 mm, total length: 1,800 mm, total width: 1,600 mm, total height: 1,900 mm, overall weight: 350 kg, number of chambers: 1, control type: manual, actuation type: electric, fuel type: electric, Equipment: CE marking, Hardening furnace Vötsch VAW 60/100, in good condition. For sale due to business closure. Very reliable furnace; the temperature difference in the combustion chamber at 500°C is +/- 15°C. The furnace was operated at a maximum temperature of 500°C during production. The door seal is in good condition. Ledjz Rnwhjpfx Akwoah The new price was EUR 38,000.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 13276/1694, type of input current: three-phase, total height: 2,500 mm, total width: 3,000 mm, total length: 5,000 mm, input voltage: 380 V, control voltage: 24 V, input current: 250 A, input frequency: 50 Hz, Equipment: documentation/manual, Inductotherm 150 kW induction furnace; comes with 3 new crucibles. Aluminum capacity: 60 kg, melting time: 30 min. Lasdpfxozfif Ro Akwjh Bronze capacity: 200 kg, melting time: 60 min.

Condition: used, Padelttherm HGU 9408/800 Hearth Car Circulation Furnace For sale is a professional Padelttherm heat treatment system / hearth car circulation furnace, type HGU 9408/800. The system was used for the heat treatment of aluminum housings and is designed as a gas-fired hearth car furnace with circulation. Two chain conveyors are also part of the documented complete system. Technical data Manufacturer: Padelttherm GmbH Type: HGU 9408/800 Year of manufacture: 2019 Design: Hearth car circulation furnace / heat treatment system Material to be treated: Aluminum housings Temperature / heating capacity - Max. permissible furnace chamber temperature: 800 °C - Operating temperature: 680 °C - Heating time from 20 °C to 680 °C: approx. 5–5.75 hours - Max. total load weight: 4,900 kg - Heating medium: Liquefied petroleum gas (LPG) - Lower heating value: 25.89 kWh/m³ - Gas inlet pressure / flow pressure: 100 mbar - Connected load: 523 kW - Natural gas flow rate: 20.2 m³/h - Combustion air: 560 m³/h at 80–100 mbar Burners / Circulation - 4 burners, each with 130 kW - 2 of these with pilot burners - Burner type: Cold air burner - Automatic ignition - Ionization flame monitoring - Individual burner control - 2 burners per circulator - 2 hot gas circulation fans Control technology - 2 control zones, front / rear - Electrical connection: 400 / 230 V, 50 Hz - Total electrical connected load: 21 kW - Hot gas circulator: 2 × 4.0 kW - Combustion blower: 7.5 kW - Lift door drive: 1.5 kW - Hearth car drive: 1.5 kW - Controller: JUMO DiconTouch - Control behavior: PID - 10 programs - Display / operation: DiconTouch - Temperature safety limiter: 2 × JUMO safetyM STB/STW - Thermocouples: NiCr-Ni, Type K, Class 1 Usable space - Usable volume: 9.41 m³ - Usable width: 1,500 mm - Usable depth: 4,200 mm - Usable height: 1,300 mm - Clear dimensions: 1,600 × 4,300 × 1,400 mm Furnace dimensions Lasdpjz Hvzrefx Akwjh - Width: 2,900 mm - Depth: 5,200 mm - Height: 3,330 mm - Weight: approx. 13,000 kg Overall dimensions of the system: - Width: 3,270 mm - Depth incl. track: 10,165 mm - Height incl. door portal: 4,355 mm Hearth car: - Width: 1,870 mm - Depth: 4,570 mm - Height: 780 mm Chain conveyor KF1400x120x80 - W × D × H: 1,785 × 14,680 × 1,850 mm - Weight: approx. 7,900 kg KF700x120x80 - W × D × H: 1,775 × 7,280 × 880 mm - Weight: approx. 1,650 kg "Everything from a single source: We would be happy to offer you a suitable bank financing for your project." You can find more items - new and used - in our shop! International shipping costs on request!