Used Aggregate for sale (818)

Condition: used, Hydraulic Power Unit, SPERRY VICKERS Hydraulic Power Pack Order No. 624186 Year of manufacture: approx. 1985 Operating pressure: 60 bar Flow rate: 6.5 liters/min Hodpfx Afjxf Ux Njnefc Tank capacity: approx. 30 liters Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - SPERRY VICKERS hydraulic pump, type GPA1-4-E - 2 solenoid operated directional valves SPERRY VICKERS, type DG4V-3-2C-UH-10-S300 Dimensions (L x W x H): 500 x 300 x 730 mm Net weight: approx. 70 kg Good condition

Condition: ready for operation (used), Hydraulic unit, consisting of oil tank with drive motor mounted thereon with flange-mounted hydraulic pump and two valve blocks located above it. 1. valve block make WANDFLUH-Hydraulik max. pressure: 160 bar Delivery rate: 20 l/min 2. valve block make BOSCH Operating pressure: 319 bar drive motor: 220/380 V, 1420 rpm, 2,2 kW space requirement: 700 x 620 x 1050 mm Weight incl. hydraulic oil (approx. 90 l): 193 kg Hfedjdz Dliopfx Afnsc

Year of construction: 1976, condition: ready for operation (used), machine/vehicle number: 12321, Hydraulic unit, consisting of an oil tank with a drive motor mounted on it with a flanged hydraulic pump and 2 valve blocks above it 1. valve block: Operating pressure 160 bar Delivery rate 20 l / min Hodpfeghgtrex Afnsfc 2. valve block: Operating pressure 319 bar Drive motor KATT: 220/380 V, 1420 rpm, 2.2 kW Required space: 700 x 620 x 1050 mm Weight: including hydraulic oil (90 l) 193 kg

Year of construction: 1975, condition: good (used), machine/vehicle number: 12148, 2 hydraulic units Hfodpfx Afsghba Njnsc Standing oil container with a hydraulic pump immersed in it and a flanged motor as well as 2 control blocks each with connection hoses Hydraulic pump: Maximum pressure: 55 bar Speed: 1500 rpm Hydraulic oil content approx .: 100 l

Condition: used, Hydraulic unit DAIKIN KOGIO (Japan) Type Y475109 / TF 71 Operating pressure: 70 bar Flow rate: 12 litres/min. Tank capacity: approx. 70 litres Motor power: 1.5 kW Electrical connection: 380 Volt, 50 Hz - 1 x pressure control valve - 1 x solenoid valve with 2 coils, 24 Volt - Pressure oil filter Hjdpexcitiefx Afnefc Required space: Length: 660 mm, Width: 500 mm, Height: 710 mm Net weight: approx. 120 kg

Year of construction: 2016, condition: reconditioned (used), press aggregate with 2 hydraulic press arms around the glued board slats in the mechanical press offset free to press. (instead of using a big hammer or big weights on the crane hook) Hedpsd Dcmqofx Afnofc

Condition: used, Year of construction: 2018, Used angle head for Holz Her CNC machining centers Year of manufacture: 2018 HSK 63 F holder with torque support Hsdpswkbcnofx Afnefc with 2 horizontal tool spindles suitable for holding a CLAMEX grooving cutter and a saw blade Technical data: max. drive speed: 8,000 rpm max. output speed: 12,000 rpm Permissible operating temperature: 85°C Unit swivels 360° around drive axis Sound level: 80 dB(A) Weight: 3.257 kg Availability: short-term Storage location: Hochheim

Condition: used, Hydraulic power unit with hydraulic pump BOSCH REXROTH / HYDRONORMA Hydraulic power unit year of construction approx. 1985 operating pressure: max. 65 bar Hfjdpfx Ajgprpgefnoc volume flow: 20 litres/min. tank capacity: 110 litres Engine power: 3 kW Engine speed: 1440 rpm. Mains connection: 400 Volt, 50 Hz - 1 piece hydraulic vane pump MANNESMANN REXROTH, type 1PV2V3-40/25RA01MC63A1 - 1 piece drive motor KATT, type FFN 100L - 1 piece pressure reducing valve BOSCH REXROTH, type DR 8 G433/100 YM - 1 piece return filter - 1 piece 4/2-way manual valve (e.g. for extending and retracting a double-acting hydraulic cylinder) - Hydraulic tank with maintenance cover and oil level sight glass Space requirement L x W x H 900 x 550 x 1150 own weight: 142 kg good condition

Condition: new, functionality: fully functional, ATEMAG Function Line QUATTRO – CNC Aggregate Changer with 4 Outputs – New/Unused For sale is a brand new, unused CNC aggregate changer from the renowned manufacturer ATEMAG (Made in Germany). This is a Function Line QUATTRO unit with four outputs, ideal for machining centers from brands such as SCM, Biesse, Homag, Morbidelli, and others. Technical data: Manufacturer: ATEMAG Model: Function Line QUATTRO (F-1110) Tool holder: SK30 Hfjdpfx Asxbh A Tsfnjc Max. speed: 15,000 rpm Outputs: 4 Automatic tool change (ATC) Original operating manual and inspection protocol included Includes accessories (keys, pull studs, etc.) Condition: New / unused / in original packaging With measurement and inspection certificate

Condition: used, functionality: fully functional, 0,75 kW Spraying device Lamella star 150/70/25 mm sisal/leather/plastic fabric Lamellar star 150/70/25 mm sisal/plastic fabric Hsdpfsigaf Rex Afnefc Flanges 70 mm reduced to 11 mm (2 pcs.) Metal Control panel top 4 motors à 0,18 kW for brushes

Condition: excellent (used), functionality: fully functional, Horizontal blade aggregate HSK compatible with Biesse machining center Hedpfxexqanye Afnefc

Condition: excellent (used), functionality: fully functional, Horizontal blade unit – spare parts Hodpfx Aexqalrsfnsfc

Condition: excellent (used), functionality: fully functional, Biesse unit for lower drilling Hfjdpfsxqaiqox Afnjc

Year of construction: 2010, condition: like new (used), I sell the radius copy milling aggregate for edges suitable for CNC working centres with edge banding HOMAG, WEEKE, BIESSE, SCM, MORBIDELLI, HOLZ-HER, IMA, FELDER, MASTERWOOD, BUSELLATO, etc. n 12.000 rpm. Radius R2mm. HSK63 holder. Available immediately. Hfedpfohw Db Iex Afnjc

Year of construction: 2018, condition: excellent (used), AGGREGATE for a refrigerator with evaporators and condensers - currently installed in a hall with an area of ​ 5,000 m2, with a cooling temperature regime of 4 to 8 °C, Hfsdpfx Afsttq E Eensc intended for the storage of fruits and vegetables. Please contact us for full technical specification. Thank you!

Condition: new, functionality: fully functional, Year of construction: 2025, A sand aggregate or gravel production plant is a facility where raw materials like sand, gravel, and other aggregates are processed to create various products used in construction and other industries. These facilities typically involve a series of processes to transform raw materials into the final products. Here is a general overview of the key components and processes involved in a sand aggregate or gravel production plant: 1. Mining and Extraction: - The process starts with the extraction of raw materials from quarries or mines. Heavy machinery such as excavators, loaders, and bulldozers are used to remove the raw materials from the earth. 2. Crushing and Screening: - The extracted raw materials often need to go through crushing and screening processes to reduce their size and separate them into different grades. - Crushers break down large rocks into smaller pieces, and screens sort the particles based on size. 3. Washing: - Washing is a common process to remove impurities such as clay, silt, and dust from the raw materials. This is particularly important for sand and gravel used in construction. 4. Grading and Sorting: - After washing, the materials may go through grading and sorting processes to separate them into different sizes and qualities. 5. Storage and Stockpiling: - Processed materials are often stored in stockpiles for further use. Adequate storage facilities are necessary to manage different grades of materials. 6. Conveying and Transportation: - Conveyor systems are used to transport materials between different stages of the production process. Transportation methods, such as trucks or conveyor belts, are used to move the final products to distribution points. 7. Quality Control: - Quality control measures are implemented to ensure that the final products meet the required specifications and standards. This may involve regular testing and analysis of the materials. Hfsdjq Nia Iepfx Afnec 8. Environmental Considerations: - Sustainable practices and environmental considerations are crucial in the operation of a production plant. Measures such as dust control, water recycling, and rehabilitation of mined areas are often implemented to minimize the environmental impact. 9. Maintenance and Safety: - Regular maintenance of equipment is essential for the smooth operation of the plant. Safety measures are also critical to protect workers and ensure compliance with regulations. 10. Final Product: - The final products from a sand aggregate or gravel production plant may include various grades of sand, gravel, crushed stone, or other types of aggregates used in construction, concrete production, asphalt production, and other applications. It's important to note that the specific processes and equipment used in a production plant may vary based on the type of raw materials, the intended final products, and local regulations. Additionally, advancements in technology and sustainability practices may influence the design and operation of such facilities.

Condition: new, Year of construction: 2025, A stone production plant for sand and aggregate is designed to produce different types of materials used in construction, such as sand, gravel, and crushed stone. Here’s a detailed layout of a typical stone production plant: Process Overview Feeding: Raw materials (large stones) are fed into the plant. Primary Crushing: Large stones are reduced in size by a primary crusher. Secondary Crushing: Further reduction of stone size by secondary crushers. Screening: Separation of crushed materials into different sizes. Sand Making: Processing certain fractions to create sand. Washing: Cleaning of aggregates and sand to remove impurities. Stockpiling: Storing the final product for shipping. Main Components Raw Material Storage: Storage area for raw stones. Vibrating Feeder: Feeds stones into crushers consistently and evenly. Primary Crusher (Jaw Crusher): Breaks down large stones into smaller pieces. Secondary Crusher (Cone Crusher/Impact Crusher): Further reduces stone size. Vibrating Screen: Classifies materials into different size fractions. Sand Making Machine (Vertical Shaft Impact Crusher): Converts some fractions into sand. Sand Washer: Cleans sand to remove unwanted particles. Belt Conveyors: Transports materials between different processing stages. Control System: Monitors and controls the entire production process. Dust Collection System: Reduces dust emissions for environmental compliance. Applications of Stone Production Plant Construction Industry: Essential for concrete, road construction, and building foundations. Landscaping: Used for decorative aggregates, pathways, and erosion control. Hedpfx Afeq Ny Sajnsfc Infrastructure Development: Supports drainage systems and flood control structures. Manufacturing: Provides materials for glass, cement, and steel production. Agriculture: Neutralizes acidic soils and serves as livestock feed. Environmental: Used in water treatment and land reclamation projects. Residential Applications: Ideal for driveways, walkways, and patios. Recreational Facilities: Supplies sand for golf courses and playgrounds. Energy Sector: Supports oil and gas drilling and renewable energy projects. Art and Design: Utilized in sculptures and architectural features.

Condition: new, Year of construction: 2025, A sand aggregate production plant is a facility where various types of aggregates (such as sand, gravel, crushed stone, or recycled concrete) are produced for use in construction and other applications. These plants typically include various stages of processing, from raw material extraction to the final product. Here are the key components and processes typically involved in a sand aggregate production plant: 1. Raw Material Extraction: Hfodpeq Ngb Dofx Afnjc - Quarrying or Mining: Aggregates are often extracted from quarries, mines, or riverbeds. Depending on the type of aggregate, the extraction process may involve drilling, blasting, or dredging. 2. Primary Crushing: - Jaw Crusher or Gyratory Crusher: The extracted raw material is usually transported to the plant and fed into a primary crusher, where large rocks are broken down into smaller pieces. 3. Secondary Crushing: - Cone Crusher or Impact Crusher: The crushed material from the primary crusher may undergo further reduction in size through secondary crushing. 4. Screening: - Vibrating Screens: After crushing, the material is often screened to separate different sizes of aggregates. This process ensures that the final product meets the required specifications. 5. Washing: - Sand Washers: In some cases, especially for sand production, washing is done to remove impurities, clay, and fines from the aggregates, ensuring a cleaner and higher-quality product. 6. Grading and Sorting: - Classifiers or Graders: After washing and screening, the aggregates may go through additional processes to separate them based on size or quality. 7. Stockpiling: - Stockpiles: The final aggregates are usually stockpiled for storage before being transported to construction sites or other end-users. 8. Aggregate Storage and Handling: - Storage Bins or Silos: Larger production plants may have storage facilities, such as bins or silos, to store different types and sizes of aggregates before distribution. 9. Quality Control: - Laboratory Testing: Regular quality control testing is performed on aggregates to ensure they meet specifications for strength, size, gradation, and other properties. 10. Environmental Considerations: - Water Management: Some plants incorporate water management systems to recycle and reuse water used in the washing process, minimizing environmental impact. 11. Transportation: - Conveyors or Trucks: Aggregates are typically transported from the production plant to construction sites by conveyors, trucks, or other means.

Condition: new, Year of construction: 2025, Gravel and aggregate production equipment is used to crush, screen, and process stones, rocks, and other materials for the construction industry. This equipment is essential in producing various types of aggregates, including crushed stone, gravel, sand, and recycled concrete, which are used in the construction of roads, buildings, bridges, and other infrastructure projects. Here are some common types of equipment used in gravel and aggregate production: 1. Jaw Crusher: - Jaw crushers are primary crushers used to break down large rocks into smaller, more manageable pieces. They are essential for the initial stage of aggregate production. Hsdsq Nxz Depfx Afnsfc 2. Impact Crusher: - Impact crushers are used to crush rocks and stones with the help of impact force. They are suitable for shaping and producing fine aggregates. 3. Cone Crusher: - Cone crushers are often used for secondary and tertiary crushing in aggregate production. They produce well-shaped and finely graded aggregates. 4. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are designed for shaping and producing high-quality artificial sand. They are suitable for processing materials with high abrasiveness. 5. Screens: - Vibrating screens are used to separate different sizes of aggregates. They classify the material based on particle size and ensure that the final products meet specified gradation requirements. 6. Scalping Screens: - Scalping screens are used to remove oversized materials before they reach the primary crusher. This helps to optimize the crushing process and prevent damage to the equipment. 7. Washing Equipment: - Washing equipment, such as sand screws or log washers, is used to remove impurities and fine particles from aggregates. This is particularly important for producing high-quality concrete sand. 8. Conveyors: - Conveyors are used to transport materials between different stages of the crushing and screening process. They play a crucial role in enhancing efficiency in material handling. 9. Stackers and Reclaimers: - Stackers are used to create stockpiles of processed aggregates, while reclaimers are used to retrieve the material from the stockpile. Both are essential for efficient material storage and handling. 10. Crushing Plants: - Complete crushing plants include various types of crushers, screens, and conveyors integrated into a single system. These plants are designed to handle large volumes of material efficiently.

Condition: repair required (used), Year of construction: 2011, operating hours: 104 h, functionality: limited functionality, machine/vehicle number: KN 10 39 17, type of cooling: water, rotational speed (max.): 1,500 rpm, tank capacity: 700 l, nominal power: 128 kW (174.03 HP), nominal power (apparent): 130 kVA, fuel type: diesel, output voltage: 400 V, output current: 188 A, output frequency: 50 Hz, motor manufacturer: Deutz, For sale is an AVS Aggregatebau GmbH diesel generator with the following key specifications: Hfedpfx Ajvtpv Nefnjc Manufacturer: AVS Aggregatebau GmbH Type: DW 130 De 15 M 12 Unit No.: KN 10 39 17 Year of construction: 2011 Technical Data – Complete Generator: Power output: 130 kVA Voltage: 400V 50 Hz Speed: 1500 rpm Fuel tank: 700 L capacity Consumption: Up to 209 g/kWh, depending on load Operating hours: 104.8 h Detailed Components: Diesel engine Deutz BF6M 1013 E Engine No.: 11021228 Power output: 128 kW Speed: 1500 rpm Water-cooled Generator Mecc alte ECP 34-1L/4 Generator No.: 0001444400 Power output: 130 kVA Cos-Phi: 0.8 Voltage: 400 V Current: 188 A Frequency: 50 Hz The generator set has the following maintenance backlog: - Replace V-belt - Replace battery - Change coolant If dismantling and pickup are carried out by the buyer, the selling price is €18,500. If dismantling is performed by Blue Energy Group AG, additional fees will apply. The components included in the purchase price can be identified in the images.

Condition: excellent (used), Drilling units with Festo control, currently mounted on a frame press. 4 drilling units 1.5 kW. 2 drilling units 1.5 kW with 240 mm stroke. 2 units with angle gears configured as sawing units. 2 drilling units with 3-spindle drilling head, 32 mm pitch. Individual sale possible. Hfsdpjw I R Iasfx Afnjc

Condition: new, Year of construction: 2025, Josan Power Generators – Proven, Robust Quality! We also offer leasing and financing options. Feel free to ask us! ‼️5-Year Warranty*‼️ Equipped with sockets and Siemens circuit breakers, ATS, and much more. Units available for immediate pickup in Heilbronn. We also offer affordable shipping—just ask! Up to 1000 kW possible. All equipped with electric start diesel engines. Example: 56 kW, 1500 rpm. Compare prices and question what engines are provided at which price point. Ask yourself what is produced in Germany or Europe. Also available with Cummins engine for an additional charge. Top quality at competitive prices! We are here for you in Heilbronn. German company, German laws, German service! All-inclusive pricing! Our certified electricians (German trades license) provide fast, direct assistance in the event of any issue—no detours. We also rent power generators, so you avoid downtime. We return every call. Discounts available for quantities of 10 units or more. Get in touch—we return every call. Backup Generator 320 kVA / 250 kW: ➡️ Proven engine ➡️ Reliable 6-cylinder diesel engine ➡️ Very quiet, approx. 65 dB ➡️ 3-phase 380/400 V, 220/230 V, 50 Hz ➡️ AVR regulation ➡️ Dimensions: approx. 3700mm x 1300mm x 1910mm ▶️ Weight: approx. 2400 kg ➡️ Electric starter Hfsdpfsp E Egajx Afnoc ➡️ 8 sockets at 220 V / 16 A ➡️ 1 socket at 400 V / 16 A ▶️ 1 socket at 400 V / 32 A ➡️ 1 socket at 400 V / 63 A ➡️ Optional: 1 socket at 400 V / 125 A ➡️ Surge protection ▶️ Socket distributor with protection class IP44 ➡️ CE-certified ➡️ With battery charger ➡️ With ATS Net price: €22,900.00 Backup Generator 150 kVA / 120 kW: ➡️ 380/400 V, 220/230 V, 50 Hz ➡️ AVR regulation ➡️ Very quiet, approx. 65 dB ➡️ Dimensions: approx. 2800mm x 1100mm x 1500mm ▶️ Weight: 1390 kg ➡️ Reliable 6-cylinder diesel engine, 132 kW / 1500 rpm ➡️ Electric starter ➡️ 8 sockets at 220 V / 16 A ➡️ 1 socket at 400 V / 16 A ▶️ 1 socket at 400 V / 32 A ➡️ 1 socket at 400 V / 63 A ➡️ Optional: 1 socket at 400 V / 125 A ➡️ Surge protection ▶️ Socket distributor with protection class IP44 ➡️ CE-certified ➡️ With ATS ➡️ With battery charger Net price: €10,900.00 Backup Generator 63 kVA / 50 kW: ➡️ 380/400 V, 220/230 V, 50 Hz ➡️ Very quiet, approx. 65 dB ➡️ Reliable 4-cylinder diesel engine, 56 kW, 1500 rpm ▶️ Weight: approx. 860 kg ➡️ Surge protection ▶️ Socket distributor with protection class IP44 ➡️ Electric starter ➡️ CE-certified ➡️ 8 sockets at 220 V / 16 A ➡️ 1 socket at 400 V / 16 A ▶️ 1 socket at 400 V / 32 A ➡️ 1 socket at 400 V / 63 A ➡️ Fully EU-compliant (including 220 V as used in Germany) ➡️ With AVR regulation ➡️ With battery charger ➡️ With ATS Net price: €6,900.00 Backup Generator 50 kVA / 40 kW: ➡️ Proven engine ➡️ Reliable 4-cylinder diesel engine ➡️ Very quiet, approx. 65 dB ➡️ 380/400 V, 220/230 V, 50 Hz ➡️ Dimensions: approx. 2100mm x 950mm x 1200mm ▶️ Weight: approx. 860 kg ➡️ Surge protection ▶️ Socket distributor with protection class IP44 ➡️ Electric starter ➡️ CE-certified ➡️ With ATS ➡️ AVR regulation ➡️ With battery charger Net price: €6,900.00 Backup Generator 25 kVA / 20 kW: ➡️ 25 kVA / 20 kW ➡️ Proven engine ➡️ Very quiet, approx. 65 dB ➡️ 3-phase 380/400 V, 220/230 V, 50 Hz ➡️ Dimensions: approx. 1800mm x 900mm x 1000mm ▶️ Weight: approx. 650 kg ➡️ Electric starter ➡️ CE-certified ➡️ With ATS ➡️ AVR regulation Net price: €5,900.00 All prices are net, plus 19% VAT! Images may show optional accessories at an additional cost. Subject to change and errors. *P

Condition: used, operating hours: 1,500 h, total width: 19,900 mm, total length: 36,200 mm, total height: 17,600 mm, fuel: diesel, overall weight: 1,600 kg, 2 independently configured emergency power generators EA 1.8-2x2.5 KVA, Zeppelin-Metallwerke, diesel powered, 1x 1553 operating hours, 1x 1135 operating hours, total weight 1600 kg, mounted on single-axle chassis with truck towing device, crane loadable, video (in operation) available – can be provided upon request, German registration, operating hours as per display. Vehicle preferably sold to commercial users or for export, private sale subject to reservation. Sold without warranty. The above information is non-binding; errors, changes, and prior sale reserved! Phone: 08026/2188 Hedpfxox Edbge Afnsfc

Condition: like new (used), functionality: fully functional, Year of construction: 2022, We are selling an almost new cold storage room with 2 Zanotti units. Ideal for warehouses or similar applications. Already dismantled. Original invoice available. Price negotiable. Hodpexy Slvofx Afnjfc

Condition: good (used), hydraulic unit, hydraulic pump, hydraulic pump, universal unit, gear pump, -Manufacturer: Orsta, hydraulic pump A10 TGL 10859 -Motor: 2x 0.55 kW 1360 rpm -Pressure: nominal pressure 16 MPa / 160 bar max pressure 200 bar Hfsdpfxoigrwis Afnoc -Flow rate: total approx. 12 l/min (2 x 6 l/min) -Hydraulic tank: with indicator -Individual components: see photos -Number: 2x aggregate available -Price per piece -Dimensions: 735/510/H1395 mm -Weight: 112 kg/pc.