Used 5 Axis Vertical Machining Centre for sale (74,928)

Condition: ready for operation (used), Year of construction: 1998, Movement X-Axis Movement 1500 Y-Axis Movement 800 Tjdpfxsxnd N Ns Ahujf Z-Axis Movement 650 This 3-axis Hartford HV-70S was manufactured in 1998. It features a maximum speed of 3500 rpm and a tool magazine with 20 slots, ISO 50 type. The working range includes X=1500, Y=800, Z=650 mm, and table dimensions of 1750x750 mm. Various tool holders are included. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2017, High-Performance 5-Axis Machining Center POSMILL H800 U Year of manufacture: 2017 Operated in single-shift mode Large spindle cooler Full Heidenhain measuring systems installed on all axes Heidenhain 530 control unit Kessler spindle, 18,000 rpm Kessler rotary swiveling arm, swing diameter 800 mm, fully usable with zero-point clamping system New maintenance scheduled for April 2025, rotary union replaced (€8,600) ————— Technical Data: Tjdpfx Asxtnikjhuef X-axis: 670 mm Y-axis: 830 mm Z-axis: 600 mm (A-/C-axis) Swivel range approx. -100 to +120° and -120 to +120°, C-axis endlessly rotating 360° Table diameter: 800 mm Tool holder: HSK 63 Tool positions: 96

Condition: good (used), Year of construction: 2003, 5-Axis CNC Machining Center AXA VPC 40 U Year of manufacture: 2003 Control unit: Heidenhain iTNC 530 Travels: X = 2300 mm vertical / 2000 mm horizontal Y = 1200 mm Z = 600 mm Working area: Width: approx. 3000 mm Table height: Zmin = vertical/horizontal 110/160 mm, Zmax = Zmin + Z travel Rotary table height: Zmin = vertical/horizontal 110/160 mm, Zmax = Zmin + Z travel Tool changer: Double gripper for parallel tool preselection during main time Short tool change times, approx. 6 sec. Tool magazine: Chain magazine with 36 tool stations Tool holders SK40 DIN69871A Drive power: 30 kW / 143 Nm 40% duty cycle (Drive no. 110); AC - hollow shaft motor; Speed range: 30 – 10,000 rpm Working spindle: Single-axis swivel head Swivel movement over B-axis in increments of less than 1°, directly programmable from X 0° to X (-) 90°; Locking via Hirth coupling Coolant through spindle External 1100 l coolant tank with rotary filter, manufacturer: KNOLL, and adjustable high-pressure pump up to 30 bar NC rotary table AXA RTA 5S Rectangular faceplate 1100 x 1100 mm; Incl. hydraulic clamping, corresponding NC axis, and direct measuring system; Additional equipment: CNC control: Heidenhain iTNC 530 with digital drive control; Incl. hard disk storage and 15'' TFT display. Data interface V.24/RS232C for data transfer. Thread cutting without compensation chuck. Increased accuracy for X, Y, and Z axes with vertical spindle. Enhanced repeatability, increased positioning accuracy, including thermal compensation in X and Z axes. Measuring systems: Direct linear (manufacturer: Heidenhain), protected. Hinged belt chip conveyor Extraction unit for double-sided extraction with fully enclosed working area Hand rinsing gun for cleaning with coolant. Tjdpfx Ahexrn Tasujf Electronic handwheel with 2 m spiral cable. Tool measuring system TT 130 (manufacturer: Heidenhain) Flat/slideway system:

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 300-M270100, Schüco PBS profile machining center – 5-axis CNC, year of manufacture 2003, ready for immediate use TECHNICAL DETAILS X-axis travel: 6,650 mm Y-axis travel: 800 mm Z-axis travel: 500 mm X-axis feed rate: 0–40 m/min X-axis rapid traverse: 40 m/min Y- and Z-axis feed rate: 0–30 m/min Y- and Z-axis rapid traverse: 30 m/min B-axis rotation: 0–90° continuous C-axis rotation: 0–360° continuous B- and C-axis rotation speed: 10,000°/min Positioning accuracy within a macro: max. 300 mm ±0.1 mm Positioning accuracy over a 6,000 mm length: < ±0.15 mm MILLING Maximum tool dimensions for milling and drilling: Ø 50 mm, length = 60 mm Maximum tool dimensions for disc milling cutters: Ø 300 mm Maximum spindle motor power: 7 kW Disc milling cutter spindle motor power: 7 kW Spindle speed: 0–30,000 rpm Tool change time: < 15 s (clamp to clamp) Tool holder: HSK-E-40 steep taper Tool magazine: 9 plus 1 positions Tedpfx Ahsxr N Rmjuef Total machine weight: 6.5 tons WORK AREA Number of clamping blocks: 8 units Clamping block positioning: automatic Maximum profile length for 3-sided machining: 6,650 mm Maximum profile length for 5-sided machining: 6,100 mm Maximum profile cross-section with maximum tool length: 300 mm x 230 mm

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) Todexx Dacopfx Ahuof - Spindle power : 12 [kW] - Spindle speeds : 24.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] - Cutting feed rates (X/Y/Z) : 1-30.000 [mm/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 11 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2325 [mm] - Machine weight : 2200 [kg] EQUIPMENT - CNC : Fanuc 31i-Model B5 - 3 colors status lamp - Type of divisor : 4e-5e axe intégré * manufacturer : LEHMANN * model : Serie 500 - Coolant tank * with high-pressure pump : 70 [bars] - Coolant through spindle - Chips conveyor : ARRIERE - Tool probe : HEXAGON - Workpiece probe : HEXAGON - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer - Chuck 3 jaws : SCHUNK

Condition: ready for operation (used), Year of construction: 1999, operating hours: 5,000 h, General Data Measurements width 2210 mm Measurements depth 2700 mm Machine weight 7200 kg Todpfx Ahjxuaxaeuef Measurements height 2930 mm Control Unit Brand SIEMENS Model Sinumerik 840D Main Drive Number of axis 3 Movement X-Axis Movement 800 mm X-Axis Feed Force 8000 N X-Axis Rapid Traverse 35 m/min Y-Axis Movement 600 mm Y-Axis Feed Force 8000 N Y-Axis Rapid Traverse 35 m/min Z-Axis Movement 500 mm Z-Axis Feed Force 8000 N Z-Axis Rapid Traverse 35 m/min Table Table load 1000 kg Tools Number of index 30 This 3-axis HERMLE C800V vertical machining center was manufactured in 1999. It features a robust SIEMENS Sinumerik 840D control, a large work surface of 1,000 mm x 560 mm, and a maximum table load of 1,000 kg. The machine offers rapid traverse rates up to 35m/min and includes 30 tool places. Ideal for demanding machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 24.000 [rpm] LINEAR AXES Todpfxjxx A U So Ahusf - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] - Cutting feed rates (X/Y/Z) : 1-30.000 [mm/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 11 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2325 [mm] - Machine weight : 2200 [kg] EQUIPMENT - CNC : Fanuc 31i-Model B5 - 3 colors status lamp - Type of divisor : 4e-5e axe intégré * manufacturer : LEHMANN * model : Serie 500 - Coolant tank * with high-pressure pump : 70 [bars] - Coolant through spindle - Chips conveyor : ARRIERE - Tool probe : HEXAGON - Workpiece probe : HEXAGON - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer - Chuck 3 jaws : SCHUNK

Condition: ready for operation (used), Year of construction: 2001, operating hours: 5,000 h, General Data Measurements width 2020 mm Measurements depth 2500 mm Measurements height 2750 mm Machine weight 6700 kg Control Unit Brand SIEMENS Model Sinumerik 840D Main Drive Number of axis 3 Movement X-Axis Movement 600 mm X-Axis Feed Force 6000 N X-Axis Rapid Traverse 35 m/min Y-Axis Movement 450 mm Y-Axis Feed Force 6000 N Y-Axis Rapid Traverse 35 m/min Z-Axis Movement 450 mm Tsdpfx Asxuaxgshuef Z-Axis Feed Force 6000 N Z-Axis Rapid Traverse 35 m/min Table Table load 500 kg This 3-axis HERMLE C600V vertical machining centre was manufactured in 2001. It features a Siemens Sinumerik 840D control, a rapid traverse of 35m/min, and a coolant system with a 200-liter tank. With a table size of 800 mm x 465 mm and a maximum load of 500 kg, it's ideal for diverse milling tasks. If you are looking to get high-quality milling capabilities consider the HERMLE C600V machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2014, General Data Machine weight 5000 kg Measurements height 2747 mm Measurements depth 2439 mm Main Drive Spindle Speed 12000 RPM Spindle motor power 13.5 kW Tool taper SK 40 Number of axis 3 Control Unit Model WINMAX GEN 5 Brand HURCO Tedpfx Aoxyl N Ishuof Movement X-Axis Movement 760 mm Z-Axis Movement 610 mm Y-Axis Movement 510 mm Dimensions Machine Length 2180 mm Table Table Width 1020 mm Table Length 510 mm Table load 1350 kg Tools Slots in storage 40 Max weight 7 kg Media Internal cooling yes This 3-axis Hurco VMX 30i was manufactured in 2014. It features a 760x510x610 mm working envelope, a 1020x510 mm table, and a high-speed spindle at 12000 rpm with SK40 taper. The machine includes a 40-piece tool changer and a chip conveyor. Renishaw probes enhance precision. If you are looking to get high-quality milling capabilities, consider the Hurco VMX 30i machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2013, Control Unit Brand FANUC Main Drive Number of axis 4 Spindle Speed 10000 RPM Movement X-Axis Movement 700 mm Z-Axis Movement 330 mm Y-Axis Movement 400 mm This 4-axis FANUC Robodrill Alfa-D21LiA5 was manufactured in 2013. It features a travel range of X: 700 mm, Y: 400 mm, Z: 330 mm, and a spindle speed of 10000 rpm. The tool magazine holds 21 tools with rapid feeds up to 54000 mm/min in X and Y, and 48000 mm/min in Z. Consider the opportunity to buy this FANUC Robodrill Alfa-D21LiA5 vertical machining centre. Contact us for more information. Tsdpfxoxz H Izs Ahuef Application Types Milling

Condition: ready for operation (used), Year of construction: 2016, operating hours: 11,898 h, General Data Tsdsxya Dmjpfx Ahuof Machine weight 5450 kg Control Unit Brand SIEMENS Model 840 Dsl - ShopMill Main Drive Spindle speed range 12000 Tool taper SK40 Number of axis 3 Movement X-Axis Movement 800 mm X-Axis Rapid Traverse 30 m/min Y-Axis Movement 560 mm Y-Axis Rapid Traverse 30 m/min Z-Axis Movement 510 mm Z-Axis Rapid Traverse 30 m/min Workpiece Workpiece weight 800 kg Tools Number of station 30 This 3-axis DMG ecoMill 800 V was manufactured in 2016. It features a robust SK40 spindle with a speed of 12,000 rpm and a 30-station tool magazine. The machine supports a maximum workpiece weight of 800 kg and includes a built-in coolant system with a high-pressure 20 bar filter. Additional features include a swarf conveyor and Renishaw touch probe. If you are looking to get high-quality milling capabilities, consider the DMG ecoMill 800 V machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2020, operating hours: 2,850 h, General Data Measurements width 2615 mm Measurements depth 2158 mm Measurements height 2985 mm Machine weight 5000 kg Control Unit Brand SIEMENS Main Drive Number of axis 3 Movement X-Axis Movement 800 mm X-Axis Rapid Traverse 36 m/min Y-Axis Movement 450 mm Y-Axis Rapid Traverse 36 m/min Z-Axis Movement 510 mm Z-Axis Rapid Traverse 30 m/min Workpiece Workpiece weight 600 kg Tools Slots in storage 30 Max weight 8 kg Max tool diameter 125 mm/80 mm Max tool length 300 mm Type of tool holder BT 40 Tsdpfx Asxzvu Dshujf Media Chip conveyor Yes Additional Equipment Electronic Handwheel Chip conveyor Oil skimmer Emulsion flushing gun 2 x Hydraulic vice 25 x Clamping chuck BT40 This 3-axis DOOSAN DNM 4500 vertical machining center was manufactured in 2020. It features a SIEMENS 828 D CNC controller, with X-axis travel of 800 mm, Y-axis travel of 450 mm, and Z-axis travel of 510 mm. The spindle operates at 12,000 rpm with a drive power of 16.5 kW. It includes a tool magazine with 30 slots and additional equipment like a chip conveyor and an electronic handwheel. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2013, General Data Machine weight 17000 kg Control Unit Brand HEIDENHAIN Main Drive Spindle speed range 12000 rpm Tool taper SK 40 Movement X-Axis Movement 1800 mm Y-Axis Movement 900 mm Z-Axis Movement 1020 mm Tsdexzvqxspfx Ahuof Additional Equipment Under-Table Chip Flushing System Integrated Chip Conveyor This 3-axis TBI MVC 1890 was manufactured in 2013. It features a robust cast iron body, cross-slide table design, and slideway guides on all axes for enhanced rigidity and precision. Key specs include a Heidenhain CNC control, SK40 spindle taper, and a maximum spindle speed of 12000 rpm. It also boasts a 24-position automatic tool changer and integrated chip conveyor. Consider the opportunity to buy this TBI MVC 1890 vertical machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2018, operating hours: 6,000 h, Control Unit Brand HEIDENHAIN Model TNC 640 This 5-axis SPINNER VC 1650-5A-9 was manufactured in 2018, featuring a dynamic motor spindle up to 9,000 rpm, HIGH-TORQUE version, and Heidenhain TNC640 control. It includes a 360° rotary table, additional clamping table, and an automatic tool changer for 96 tools. Ideal for complex 5-axis simultaneous interpolation and precision machining. If you are looking to get high-quality milling capabilities consider the SPINNER VC 1650-5A-9 machine we have for sale. Contact us for more information. Tedoxtq Uvjpfx Ahusf Application Types Milling

Condition: ready for operation (used), Year of construction: 2013, Control Unit Brand HEIDENHAIN Model TNC 620 Main Drive Spindle speed range 12000 Tool taper BT40 Number of axis 3 Movement X-Axis Movement 760 mm X-Axis Rapid Traverse 36 m/min (reduced to 25 m/min) Y-Axis Movement 460 mm Y-Axis Rapid Traverse 36 m/min (reduced to 25 m/min) Z-Axis Movement 460 mm Z-Axis Rapid Traverse 36 m/min (reduced to 25 m/min) Todpfx Aexn Dlkehusf Table Outer length 900 mm Outer width 410 mm Table load 350 kg This 3-axis SPINNER VC 750 was manufactured in 2013. Ideal for precision CNC milling, this machine offers robust performance and reliability. Consider the opportunity to buy this SPINNER VC 750 CNC milling machine. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,400 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: SIEMENS, controller model: Sinumerik, Control Unit Brand SIEMENS Model Sinumerik Movement X-Axis Movement 1400 mm Z-Axis Movement 600 mm Y-Axis Movement 700 mm This 4-axis WAGNER VMC 1400 was manufactured in 2007. It features a spindle power of 28 kW, maximum spindle torque of 230 Nm, and a spindle speed up to 4000 rpm. It includes a 4th axis for machining workpieces up to 1100 mm. Ideal for complex machining tasks. Contact us for more information about this machine. Application Types Tsdpfxexzluye Ahujf Milling

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 7000 kg Control Unit Brand FANUC Model 0i-MD Movement X-Axis Movement 1020 mm Z-Axis Movement 550 mm Tsdpfx Ahexzlvkouof Y-Axis Movement 610 mm Main Drive Spindle Speed 8000 RPM Spindle motor power 15 kW Tool taper ISO 40 Number of axis 4 Table Table load 600 kg Table Width 1200 mm Table Length 600 mm Tools Slots in storage 24 Max weight 7 kg Media Internal cooling yes This Dugard 1000Y Plus was manufactured in 2011. It features a table size of 1200 × 600 mm, a maximum table load of 600 kg, and a tool magazine capacity of 24 tools. The machine includes a fourth rotary axis and is equipped with a FANUC 0i-MD control. If you are looking to get high quality milling capabilities consider the Dugard 1000Y Plus machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2010, Control Unit Brand HEIDENHAIN Model TNC 530 Main Drive Number of axis 3 Tsdpsxzlumefx Ahujf Spindle Speed 10000 RPM Tool taper ISO 40 Movement X-Axis Movement 1016 mm Z-Axis Movement 710 mm Y-Axis Movement 610 mm Table Table load 700 kg This 3-axis MAS MCV 1016 QUICK was manufactured in 2010. It features a table size of 1300 × 600 mm, with a maximum travel of 1016 mm in the X-axis, 610 mm in the Y-axis, and 710 mm in the Z-axis. The spindle supports a speed range of 20–10000 rpm with stepless speed change. It can handle a maximum table load of 700 kg. If you are looking to get high-quality milling capabilities consider the MAS MCV 1016 QUICK machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2018, Control Unit Brand HEIDENHAIN Todpfx Ahoxr Rypsuef Model iTNC-530 Movement X-Axis Movement 620 mm Y-Axis Movement 820 mm Z-Axis Movement 650 mm Additional Equipment Optional chucks and open mind license for 5-axis / Approx. 260 HSK63 holders with rack / CAD-CAM Hypermill OPEN MIND license for 5-axis simultaneous milling Note: The Y-axis is louder than it should be. We recommend replacing the bearings for the Y-axis. However, the machine is running and is still in production. This 5-axis POSmill H 500 U was manufactured in 2018, featuring a vertical machining center with X-620, Y-820, Z-650 travel dimensions, and a 60-space workshop. It includes internal coolant supply plus air cooling and is equipped with a Heidenhain iTNC-530 control for five-axis simultaneous milling. If you are looking to get high-quality milling capabilities consider the POSmill H 500 U machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2016, operating hours: 38,452 h, Control Unit Brand SIEMENS Model 840D Main Drive Spindle speed range 24000 rpm This 3-axis DMG MILLTAP 700 was manufactured in 2016. It features a 24,000 rpm spindle, 60 m/min rapid traverse, and a quick tool change system. Equipped with a Siemens 840D control and a Renishaw 3D probe, it offers precision and efficiency. Consider the opportunity to buy this DMG MILLTAP 700 vertical machining centre. Contact us for more information about this machine. Todpfx Asxr Rz Hjhuef Application Types Milling

Condition: ready for operation (used), Year of construction: 2007, Main Drive Spindle speed range 22000 Tool taper BT30 Tedpoxr R Aqefx Ahuof Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 200 mm This Brother TC 31AN was manufactured in 2007. It features a robust Fanuc machining center control, a high-speed spindle up to 22,000 rpm, and a BT30 spindle taper. The work table measures 500 x 270 mm, complemented by a 26-slot tool magazine. Specialized with a rotary changer table for efficient fixture loading. Contact us for further details regarding this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 1996, operating hours: 23,198 h, Control Unit Brand DECKEL MAHO Model Millplus V400 Main Drive Number of axis 3 Tedsxr Rztspfx Ahuof This 3-axis DECKEL MAHO DMU 60T was manufactured in 1996. It features a 24-position tool changer, an NC rotary table, and a spindle speed up to 6300 rpm. The working areas are 600 mm in length, 525 mm in width, and 500 mm in height. It includes a coolant system with a 150-liter capacity. Consider the opportunity to buy this DECKEL MAHO DMU 60T vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2008, operating hours: 5,557 h, Control Unit Brand HAAS Main Drive Spindle speed range 8100 Number of axis 3 Movement X-Axis Movement 706 mm Y-Axis Movement 406 mm Z-Axis Movement 508 mm Workpiece Workpiece weight 1361 kg This HAAS VF-2, manufactured in 2008, offers strong machining capability with 706 mm of X-axis travel, 406 mm on the Y-axis, and 508 mm on the Z-axis. Equipped with a spindle speed of 8100 rpm and a powerful 22.4 kW spindle motor, it is well suited for demanding milling applications. The visual and technical condition of the machine is very good for its age. Contact us for more information. Todpfx Ahsxq Hrxeujf Application Types Milling

Condition: ready for operation (used), Year of construction: 2002, Movement X-Axis Movement 700 mm Y-Axis Movement 550 mm Z-Axis Movement 500 mm Tsdpjxx Dw Isfx Ahusf This 3-axis DECKEL MAHO DMC 70 V was manufactured in 2002. It features a 30-position tool changer, a spindle speed of 18,000 rpm, and a chip conveyor. The control system is a TNC 430. Note: tool keys in Z direction are defective. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMC 70 V machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2020, General Data Measurements width 4000 mm Measurements depth 5000 mm Measurements height 3800 mm Machine weight 18000 – 20000 kg Main Drive Spindle speed range 6000 Tool taper BT-50 Number of axis 3 Movement X-Axis Movement 2500 mm X-Axis Rapid Traverse 20 m/min Y-Axis Movement 950 mm Y-Axis Rapid Traverse 20 m/min Z-Axis Movement 850 mm Tsdpfxexvfiyj Ahujf Z-Axis Rapid Traverse 18 m/min Table Table load 4000 kg This 3-axis DOOSAN MYNX 9500 was manufactured in 2020, featuring a BT-50 spindle taper and a spindle speed of 6,000 rpm. It includes a 40-tool ATC and can handle a table load up to 4,000 kg. The machine dimensions are approximately 5,000 × 4,000 × 3,800 mm. If you are looking to get high quality milling capabilities consider the DOOSAN MYNX 9500 machine we have for tact us for more information. Application Types Milling