Used M5 for sale (646)

Condition: good (used), T-nut, screws, grub screws, for Bosch profile, construction profile, aluminum profile, aluminum T-slot profile -T-nuts: 22 x 12 mm slot 8, with spring ball, 30 pieces -Thread: M5 -Groove width: 8 mm -Dimensions: 22 x 12 mm, see photos -Price/Quantity: 30 pieces -Price: 8 euros net for 30 pieces -Number: 9690 pieces in total -Transport dimensions: 600/400/H200 mm -Weight: 101 kg Lrodpsymb Axefx Apmjp

Condition: used, Pneumatic valve, air valve, pressure valve, on-off valve, button valve, foot switch -Manufacturer: Festo, button valve foot switchl ovp -Type: F-3-M5 Mat. no. 4452 series A508 -Working pressure: 0.0 - 8 bar -Number: 2x button valves available -Price per piece -Dimensions cardboard: 65/55/H85 mm Lsdoii Sfbopfx Apmerp -Weight: 0.4 kg/pc.

Condition: used, Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting attachment, thread cutting quick change chuck -Manufacturer: Bilz/Gewefa thread cutting quick-change chuck MK2 -Intake: Type Bilz WFLK 115 MK 2 Lredpfxjphupuj Apmjp -Type: Gewefa 05.056.104 M4xØ4.5xØ3.4 -Type: Bilz WES 1 BK 4.5x3.4 M 4 -Type: Bilz WES 1 B 3.5x2.7 M 5 -Total dimensions: 140/35/H120 mm -Weight: 0.7 kg

Condition: used, Tapping chucks, thread chucks, tapping chucks, milling tools, tapping attachments -Manufacturer: WMW ABW, tapping chuck holder MK2 with 5 pieces of holders -Type: GB2 M5 - M16 -Dimension: O 62 x 192 mm -Weight: 1.8 kg Lodpshh Ir Aofx Apmorp

Condition: used, Year of construction: 1998, Suitable for removing sharp burrs on workpieces of all kinds, especially for indexable inserts. Accessories: Siemens Coros OP15 HMI interface Production work cycle: 0.1 – 99.9 min Operating cycle: 0.1 – 99.9 min operating mode: (6) 120,015, Plates Speed continuously variable: 60 – 600 rpm Rated power: 2,17 kW direction of rotation reversal: 0.1 – 99.9 min Brush diameter: 381 mm X-axis (polishing table) speed: 3.5 & 7 RPM capacity: 0,25 kW Direction of rotation reversal (synchronized with the Y-axis): 0.1 – 99.9 min Z-Axis (brush inlet) total rack length: 304,8 mm Fine feed range: 80,01 mm Smallest step size: 0,01016 mm Lrodpfx Apozg Uq Ujmsp Contact point recording: manual/automatic Working area workpiece holder plates: 6 Diameter of the baseplate – maximum: 120 mm Cooling (for constant results) Fan: 0,12 kW Control operating terminal: Siemens OP 15 Program storage capacity: 99 Connected load approx.: 480 V / 50 Hz Dimensions W x D x H approx.: 1120 x 810 x 1730 mm Weight approx.: 599 kg colour: Light grey

Condition: new, NEW OKIO-M5 Grinding Robot Eccentric sander and force sensor Axes: 6 Payload: 5 kg Reach: 922 mm Lodpfx Astr T R Ajpmorp

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting attachment, quick-change thread cutting chuck, quick-change thread chuck -Manufacturer: Holex, Thread cutting chuck, quick-change thread chuck, 7 pieces Lrjdpjzcu Srsfx Apmjp -Type: 335620-10 -Size: M5 to M20, see photos -Submission/Price: complete -Transport dimensions: 330/120/H70 mm -Weight: 4.4 kg

Condition: new, Year of construction: 2026, Delivery time: immediately from stock Continuous/normal drilling capacity 35/40 mm Threading capacity max. M30 (dependent on pitch) Manual reversing switch for right/left rotation Undervoltage release, thermal overload protection Spindle MK 4 Drilling depth 160 mm Overhang 300 mm Column diameter 110 mm Usable table surface [W x L] 420 x 340 mm Speed indicator, scale Drilling depth indicator, scale Drilling depth stop with fine adjustment Table height adjustment with rack and pinion Motor, three-phase, 400 V, pole-switching, 1.5/3 kW Spindle speeds with gearbox, continuously variable, 100-2000 rpm Machine dimensions (W x D x H) 610 x 850 x 1920 mm Weight 420 kg Delivery: free to your door including packaging. FACTORY WARRANTY: 3 years Lodod H Rg Hjpfx Apmjrp NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: used, Year of construction: 1982, Technical details: dimensions of grinding wheel: Ø 150 x 20 mm grinding spindle speed: 3600 U/min height over floor: 900 mm current type: 220 V machine weight approx.: 27 kg Ljdsu Ngxdopfx Apmorp dimensions L x W x H: 0,37 x 0,35 x 1,4 m Double sanding bench sitting on foot stand (foot Ø 353mm) Left side with drill grinding device (angle 90° - 180°), longitudinal adjustment 25mm incl. accessories *

Condition: new, empty load weight: 1,010 kg, maximum load weight: 2,490 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 4,600 mm, loading space width: 1,980 mm, loading space height: 300 mm, loading space volume: 2.8 m³, color: silver, construction height: 1,680 mm, working width: 2,530 mm, incl. rear ramp / parabolic suspension / spare wheel / bucket storage, automatic reverse drive, drive-on ramp, hot-dip galvanizing, *INSTANTLY AVAILABLE incl. rear ramp / parabolic suspension / spare wheel / bucket storage Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY !!! - Gross vehicle weight: 3,500 kg - Unladen weight: 1010 kg - Payload: 2,490 kg - Interior dimensions: 460 x 198 x 30 cm (L x W x H) - Overall exterior dimensions: 660 x 253 x 168 cm (LxWxH) - Loading sill height: 38 cm - Tires: 195/60R12C - Brake: yes - Support wheel: yes, automatic - 100 km/h: optional - incl. vehicle documents Vehicle body: - Brake: yes - Number of axles: 3 - Floor: Wood, Finnish multiplex board - Side walls: Sheet steel, single-walled - Side wall height: 30 cm - Locks: Eccentric locks - Number of pallet spaces: 7 - Multifunctional vehicle: No - Tipping / lowering function: None - Hydraulic pump: - - Overrun device/brake: KNOTT - Frame/chassis: Welded steel frame - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar, bolted, C-profile - Mudguards: Aluminium chequer plate mudguards - Spare wheel: Yes - Bucket storage: Yes - Superstructures / attachments: No - Ramp shaft: No - Ramps/ramp flap: Yes - Ramp type: Continuous tailgate - Ramp load: - - Drive-on angle: approx. hot-dip galvanized - steel drive-on flap standing on shaft 130cm - sturdy eccentric locks - support brackets on drive-on flap - lifting aid for drive-on flap - very low chassis for low drive-on angle - excavator bucket rest at the front - spare wheel, mounted under excavator bucket support - 10x lashing rings mounted in the outer frame (1000dAN/kg) - 10x lashing rings on the inside - parabolic spring axle from KNOTT - parabolic spring axle for absolutely heavy-duty use - automatic reverse drive - KNOTT overrun device and parking brake - lockable coupling head - spare wheel, mounted under excavator bucket support - very sturdy bolted V-drawbar REINFORCED - 13-pin plug - return driving license - very sturdy bolted V-drawbar - 13-pin plug - return driving license - return driving license. plug - reversing lights - generously dimensioned safety lighting - integrated rear fog light - lighting recessed in rear frame - lane departure lights at rear with rubber arm - heavy-duty support wheel in the middle Accessories can be retrofitted - please enquire: - 100 km/h approval - storage box - net hooks - additional lashing eyes - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Lrsdju Hrlqspfx Apmop

Condition: used, from a well-known manufacturing plant in Bulgaria. Lrsdpfxjzd Rz Dj Apmsp

Condition: good (used), Year of construction: 1981, functionality: fully functional, SINGLE-DIE TUBULAR RIVET HEADER NATIONAL M5 Rebuilt on 2024. New electrical system. Operational, working. Available for any test. Number of die: 1 Number of pieces per min.: 300 Length Rivet: 20 mm. Depth of Pierce (max.): 5 mm. Cutoff diameter: 5 mm. Floor space (width): 1.300 mm. Floor space (length): 2.690 mm. Power of main motor: 7.5 KW Ljdpfjtxni Njx Apmerp Net weight: 3.100 kg. Gross weight: 3.700 kg.

Condition: excellent (used), probes, extension, cubes and some more für M5 probing systems like Zeiss (VAST, ST); Renishaw (SP80, MP2 usw) and Leitz (LSP, Trax) Lrsdjgrtynopfx Apmjp Price min. 50% discount to list price from Komeg or Renishaw pricelist Please send us your wanted probes

Condition: ready for operation (used), Year of construction: 2017, operating hours: 26,000 h, functionality: fully functional, machine/vehicle number: M5427F3D01, Flow MACH 500 4020 DWJ Waterjet Cutting Machine Manufacturer: Flow Model: MACH 500 4020 DWJ Year of Manufacture: 2017 Technical Specifications Working area: 4,000 × 2,000 mm Dynamic Waterjet (DWJ) taper compensation cutting head UltraJet 60,000 PSI intensifier pump Abrasive waterjet cutting system Abrasive sludge extraction system Approx. 26,000 operating hours 380–480 V, 50/60 Hz, 3 Phase CE marked Machine Description A well-maintained Flow MACH 500 4020 Dynamic Waterjet cutting system in good working order. The machine is currently installed and can be inspected under power. The Dynamic Waterjet head provides automatic taper compensation, producing highly accurate components with excellent edge quality while reducing secondary finishing operations. Suitable for cutting a wide range of materials including: Stainless Steel Mild Steel Aluminium Titanium Copper & Brass Plastics Composites Glass Stone Ceramics The machine is fitted with an UltraJet 60K intensifier pump and an abrasive sludge extraction system, making it suitable for continuous production environments. Condition Regularly maintained throughout its working life Fully operational Lsdpfx Apezhkmuemjrp Demonstration available by appointment Service history available on request Included Flow MACH 500 4020 Waterjet System Dynamic Waterjet Cutting Head UltraJet 60K Intensifier Pump Abrasive Delivery System Abrasive Sludge Extraction System Location: Ireland Price: On Request The machine is available immediately. Further photographs, videos, maintenance information and machine demonstrations can be provided upon request.

Condition: good (used), Auriol M500VBEX cooking kettle Ledpfsnbd S Tjx Apmorp Serial: 3429 Stainless, 500l capacity, steam jacketed, emulsifier with bottom mounted motor, emulsifier diameter 120mm, variable speed, auto tilt to discharge, on load cells, 3Ph

Condition: excellent (used), Year of construction: 2009, operating hours: 93 h, machine/vehicle number: GS000526, Size 36 x 52 cm, Alcolor Vario dampening system, Technotrans cooling and recirculation system, Ink unit temperature control, Anicolor inking units, Double sheet detection, Side guide control, Blanket washer, Roller washer, Impression cylinder washer, Autoplate system, IR dryer, Extended delivery. Ledpfx Ajznl T Ajpmorp

Condition: ready for operation (used), Dittel Marposs AE-SENSOR-SF 2xM5 3.0 VM10P O3PZ1114207 SN O16LW2808, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lrjdpfx Apjznq Ncsmep

Condition: good (used), mileage: 374,947 km, power: 368 kW (500.34 HP), first registration: 07/2019, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 4x2, wheelbase: 4,800 mm, fuel: diesel, color: green, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 8,680 mm, total width: 2,550 mm, total height: 3,550 mm, loading space length: 5,830 mm, loading space width: 2,480 mm, loading space height: 2,110 mm, Year of construction: 2019, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, seat heater, traction control, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - Hydraulic system - Manual - Auxiliary drive - Pump - Radio/cassette - Sleeper cab - Lane keeping assist - Fabric = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 9445 kg, Gross vehicle weight: 19500 kg, Total tank capacity: 780 liters, Trailer coupling, Axle pin diameter: 40 DIN, Fifth wheel coupling: Fixed, Number of locks: 1, Suspension type: Air suspension, Type of cab: Sleeper cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: Green, Heated mirrors, Type of lighting: Halogen lamp, Lane keeping assist, Air conditioning, Seat heating, Bluetooth, Flashing lights, Engine power: 368 kW (493 Hp), Fuel: Diesel, Euro: 6, Transmission type: Automatic, Transmission type: ZF, Gears: 12, Power steering, ABS, ASR, Hydraulic system, Auxiliary drive, PTO type: 1, Starter battery, Number of sides: 1 side, Pump, Central locking, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual = Additional Information = Lsdpfexmrqlox Apmerp Transmission Transmission: ZF, 12 gears, Automatic Axle Configuration Brakes: Disc brakes Axle 1: Tire size: 385/65R22.5; Steered; Tire tread depth left: 14 mm; Tire tread depth right: 12 mm; Suspension: Leaf spring suspension Axle 2: Tire size: 315/80R22.5; Double tires; Tire tread depth left inner: 13 mm; Tire tread depth left outer: 14 mm; Tire tread depth right inner: 11 mm; Tire tread depth right outer: 12 mm; Suspension: Air suspension Weights Unladen weight: 9,445 kg Payload: 10,055 kg GVW: 19,500 kg Functional Loading platform height: 153 cm Pump: Yes Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: €605 per month (default, 60 months); Ask for more information and conditions Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our offer includes all European brands from various model years and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Support for import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, New machine, purchased in 2020. Ideal for: Furniture manufacturing Kitchen manufacturing Carpenters/joiners Series drilling for Blum fittings and hinges Lrsdpfjznkufox Apmjp Technical specifications: 3 x 400 V 1.1 kW Professional industrial version The machine comes from a workshop liquidation. Scope of delivery: Machine Stops/accessories, base frame as shown in the pictures Operating manual Inspection/test run possible by arrangement.

Condition: used, Marvel Townsend StorkDMM50 meat bone separator to produce best quality low pressure deboned meat when used in conjunction with a Baader or SEPAmatic. This machine has come direct from a closed meat factory in Scotland. Almost impossible to find these machines on the used market. Lrsdpfx Apjlkc I Rjmep

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 1,800 h, load capacity: 5,000 kg, lifting height: 5,500 mm, free lift: 1,000 mm, fuel type: diesel, mast type: triplex, construction height: 2,950 mm, power: 61 kW (82.94 HP), fork length: 1,200 mm, empty load weight: 7,760 kg, total length: 3,755 mm, drive type: Diesel, construction width: 2,070 mm, Rough terrain forklift Load center: 600 ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Triplex Transmission: Torque converter Speed class: 20 Condition: Ready for use and fully functional Technical condition: good Front tire type: Pneumatic Front tire size: R 22 Front tire condition: 20 - 40% Ledpfxoznpdls Apmerp Rear tire type: Pneumatic Rear tire size: R 18 Rear tire condition: 20 - 40% Side shifter, 3rd valve, rear work light, front work light, full cab.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, For sale is a Blum Minipress M51N100 in well-maintained condition. This proven pneumatic hinge and dowel drilling machine is ideal for professional use in furniture manufacturing, interior design, and carpentry workshops. The machine is offered with extensive original accessories as shown in the photos and is ready for immediate use. Technical data: Manufacturer: Blum Type: Minipress M51N100 Year of manufacture: 1991 Motor power: 0.75 kW Operating voltage: 380 volts 50 Hz Pneumatic operation Made in Austria Equipment: Pneumatic workpiece clamps 7-spindle drilling head for drilling rows of holes 2 stop gauges Precise depth stop Sturdy work table Original Blum stop system Extensive original accessories as shown in the photos Various stops, templates, and drilling tools Application areas: Drilling rows of holes Drilling dowel holes Drilling hinge holes Drilling hinge plate holes Series production in furniture and interior design The machine is in a well-maintained condition, commensurate with its age, and impresses with the well-known precision and quality of Blum. Transportation is possible for an additional charge! Note: Lsdpjzmrygsfx Apmsrp The machine will be inspected before sale. Due to the age of the used machine, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information without guarantee.

Condition: good (used), Auriol M500VBEX cooking kettle Serial: 3430 Lrjdonbd R Sjpfx Apmep Stainless, 500l capacity, steam jacketed, emulsifier with bottom mounted motor, emulsifier diameter 120mm, variable speed, auto tilt to discharge, on load cells, 3Ph

Condition: used, Year of construction: 2008, machine/vehicle number: 220028, CNC control: HEIDENHAIN iTNC 530, travel ranges: X-axis 4300 mm, Y-axis 1500 mm, Z-axis 1300 mm, table size 4970 mm x 1200 mm, max. table load 15,000 kg/m, tool holder ISO 50, multi-angle milling head 45°, automatic angular positioning of axes B and A, spindle motor power 22 kW, hydraulic rotary lock, working feed rate 10,000 mm/min, rapid traverse rate 20,000 mm/min, with coolant system, total spindle operating hours: 25,496 hours. Lsdpfjzn A U Rsx Apmorp

Condition: used, Year of construction: 2003, (1) Injection molding machine, Handling: Sepro Robotique | Success 7 | 2016 Temperature control: HB Therm | Miscellaneous: 1x Protective Enclosure Ledsy N R U Rspfx Apmsrp 1x Conveyor Belt, company RAU Maschinenbau 1x Hot Runner Controller 1x Conveyor Belt, company SAS Grillet 1x Conveyor Unit, company Motan Technical Details: Machine size: 500/370-200 Power supply: 3/N/PE AC 400 V Frequency (Hz): 50 Current (A): 94 Weight (t): 3.3 Pressure (bar): 210 Flow rate (l/min): 130