Used 4 Sided Planer for sale (67,937)

Condition: excellent (used), CATALOGUE NUMBER 7186 TECHNICAL DATA - max. planing width 510mm - max. planing height, two-sided 170mm - max. planing height, four-sided 100mm *from above: - toothed infeed roller - pawls - toothed feed roller - pressure roller - planing roller 510mm, 4-knife (2 knives installed) 4kW - smooth feed roller, outfeed *from below: - guide strip - slip roller – adjustable table with roller, up/down - planing roller 510mm, 2-knife 4kW - 2 smooth, slip rollers, adjustable *from the rear: - 2 side spindles + pressure roller - 1) vertical right spindle 100mm 2.35kW - 2) vertical left spindle 100mm 2.35kW - spindle diameter 35mm - spindles adjustable up/down, right/left - manual planing thickness adjustment - 4 feed speed settings - feed motor 1.5kW - dimensions L/W/H 1940x1320x1140mm - weight 1330kg ADVANTAGES – ideal for processing logs, flooring, etc. – manufactured by the German brand KUPFERMUHLE – used planer, very good condition Net price: 32900 PLN Net price: 7651 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR Gkedjztalqopfx Aivec (price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), Guilliet four-sided planer Max. planing width: 180 mm Max. planing height: 120 mm 4 heads, heads included Motor powers: Bottom: 3.7 kW Gksdpfez D S I Aex Aivec Right: 3.7 kW Left: 3.7 kW Top: 5.5 kW Spindle diameter: 30 mm Electric adjustment of pressure and planing thickness Feed on cardan shafts with 2 speeds Machine length: 310 cm Branded machine, in very good condition.

Condition: excellent (used), The WEINIG CUBE four-sided planer is offered as a used machine. The machine features a reversible knife system, electric height adjustment, and a lubricant pump. Width and height are displayed via laser. The equipment also includes a Cube Mech stacking system. Technical data: Gkjdoz Hk Slopfx Aivjc Planer width: 260 mm Planer height: 160 mm Number of spindles: 4 Motor, spindle 1: 5.5 kW Motor, spindles 2 + 3: 5.5 kW Motor, spindle 4: 5.5 kW Feed speeds: 6-12 m/min Dust extraction port Ø: 250 mm Quality information: - Feed system checked - Table guides checked - All settings checked - Complete basic inspection - Complete basic cleaning - Pneumatics checked - Ready for immediate use

Condition: excellent (used), Year of construction: 2016, Steton 5-head four-sided planer. Steton 5-head four-sided planer. The machine after the review does not require a financial contribution. Technical data: - max width of the workpiece 23 cm - max height 13 cm spindle diameter 40mm - 1 - Horizontal bottom 23 cm - 2 - vertical right 13 cm - 3 - vertical left 13 cm - 4 - horizontal upper 23 cm - 5 - universal 360 degree soundproofing cabin Godsi Apuhopfx Aivskc - electric setting of planing thickness - two types of feed speed

Condition: used, Weinig Profimat 22N four-sided planer Gkjdpfez Hm Dqjx Aivsc Max. planing width: 230 mm Max. planing height: 120 mm 4 heads Heads are fully adjustable Bottom spindle: 5.5 kW Side spindle: 5.5 kW Top spindle: 5.5 kW Spindle diameter: 40 mm Feed rate with stepless adjustment from 6 to 22 m/min Robust planer from the WEINIG brand. Machine inspected, well-maintained, and in very good condition.

Condition: excellent (used), CATALOGUE NUMBER 8035 TECHNICAL DATA - shaft width 640mm - 4-knife shaft - max. thickness of workpiece on thicknesser 250mm - max. thickness of workpiece on side heads (3-sided) 110mm – from above: - ejectors - geared infeed shaft - pressure roller - planing shaft - pressure roller - smooth outfeed shaft - pressure roller at the outlet – from below: - guide strip - adjustable rollers in the lower bed 2 pcs – from the rear: - side spindles + pressure roller 2 pcs - spindle height 110mm - spindle diameter 30mm - spindles adjustable left/right, up/down - motors for side spindles 2x4kW - main motor 7.5kW Gedpfx Aiozu Sgpovokc - 3 feed speed types - electric table lifting - dust extraction nozzle 2x110mm - overall dimensions L/W/H 1650x1500x1210mm - weight 1370kg ADVANTAGES - Made in Poland - Shaft with 4 knives - Used planer, very good condition Net price: 23900 PLN Net price: 5558 EUR depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), Catalog number 6747 TECHNICAL DATA - max. planing width 170mm - max. planing height 130mm 7 spindles: 1) horizontal lower 170mm 4kW 2) vertical right 130mm 5.5kW 3) vertical left 130mm 5.5kW 4) vertical right 130mm 5.5kW 5) horizontal upper 170mm 4kW - 5 spindles with electrically adjustable up/down movement 6) horizontal lower 170mm 5.5kW 7) universal 170mm, adjustable at an angle of 180° 7.5kW - diameter of all spindles 35mm - all spindles adjustable up/down and left/right - 6 toothed feed rollers on top, including 2 double rollers - 4 rubber feed rollers on top - feed rollers with pneumatic pressure - 1 pressure roller on the side - 2 guide strips on the table - electric adjustment of planing thickness 0.37kW - length of the infeed table 2480mm - stepless adjustment of feed speed - feed motor 2.2kW - diameters of dust extraction nozzles 1x135mm, 5x120mm - dimensions (L/W/H) 5550x1900x1660mm - weight approx. 3500kg ADVANTAGES - German-made - with 7 heads - universal spindle - used planer, very good condition Net price: 27900 PLN Gjdpfozwwmaex Aivskc Net price: 6488 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 2105025, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, input current: 72 A, Four-sided planer Leadermac Compact LMC-523C with 5 spindles, manufactured in 2021. Working width 15 - 230 mm, working thickness 10 - 150 mm, minimum piece length 800 mm (300 mm for sequential feed). Spindles: 3 x 7.5 HP and 2 x 10 HP, spindle speed 6,000 rpm, spindle diameter 40 mm. Feed motor 5 HP with inverter, feed speed 6 - 24 m/min. Fully enclosed machine with sound insulation, chrome-plated feed table, pneumatic pressure rollers with 3 adjustment positions, and a solid cast iron frame. Connection 380 V / 50 Hz, CE version. Options: infeed table 2.5 m (instead of 2 m), pneumatic side pressure roller on the left spindle, split pressure roller at the top, additional tables for multiple sawing on the 2nd bottom spindle, anti-kickback device, and Schneider Easyset touchscreen (1 x conventional and 2 x NC). Gksdpfoz Ngitox Aivsc

Condition: excellent (used), Year of construction: 1981, 4-SIDE PLANER MOULDING MACHINE WEINIG UNIMAT 17 A With 5 spindles Technical specifications: Working width: max 180 mm Working height: 120mm Spindle speed: 6000 rpm Diameter of the spindle: 40 mm Smallest tool diameter: 100mm Max. tool diameter: 160mm Max. diameter of the vertical spindles : 180mm Max. tool diameter of the 2nd right spindle: 195mm Max. tool diameter of the upper spindle: 200mm Max. tool diameter of the lower spindle: 180mm Feed speed variable: 7 - 18 m / min Throughfeed with springs pressure Trasmissione a catena ( non cardanica) Spindle arrangement: 1. spindle bottom hotizontal(planer), KW 4 2nd spindle vertical right KW 3 Gjdpegqrunjfx Aivskc 3rd spindle vertical left- KW 4 4th spindle upper horizontal KW 5,5 5th spindle bottom horizontal KW 4 1 set of Planing tools are included Volt 380/50 hz SECOND-HAND MACHINE IN GOOD CONDITIONS, TESTED IN OUR WORKSHOP BEFORE DELIVERY

Condition: used, Year of construction: 1999, Used 4-sided planing machine Manufacturer: WEINIG Type: Unimat 23 E Year of manufacture: 1999 with infeed unit EM11 Year of manufacture: 1999 Technical data: 5 spindles (bottom, right, left, top, bottom) Total connected load min. / max. 42 kW - 126 kW Air flow rate 30 - 32 m³ / MIN Air flow rate per spindle 28 - 32 m³ / MIN Total air flow rate 8400 - 9600 m³ / H Nominal pressure 8 bar Gkodpfx Aezuzdqeivsc Operating pressure 6 bar Connection diameter DN 8 Machine weight approx. 3200 kg Static load (with support plates 80 x 100 mm) max. 120 N / CM² Note: The technical data and descriptions are transcriptions from the original order confirmation. The data is for informational purposes only and is not binding.

Condition: like new (used), Year of construction: 1991, functionality: fully functional, Weinig PROFIMAT 22N four-sided planer – after technical inspection – very good condition – technical documentation TECHNICAL SPECIFICATIONS: planing width 220 mm planing height 120 mm spindle diameter 40 mm bottom head 4 kW right head left head 11 kW top head 5.5 kW Gkodpfx Aothfh Eoivjc bottom head 4 kW feed motor 2.2 kW feed speed 6-22 m/min four upper steel feed rollers one upper rubber feed roller feed via cardan shafts pneumatic pressure electric height adjustment length of the infeed table 2485 mm machine dimensions (L/W/H) 400 / 180 / 170 cm weight ~ 1800 kg

Condition: excellent (used), Catalog number 7289 TECHNICAL DATA - max. width of the workpiece 230mm - max. height of the workpiece 170mm 6 spindles: 1) horizontal, lower 230mm, 5.5kW 2) vertical, right 170mm 3) vertical, left 170mm (2 and 3 spindles) 11kW 4) horizontal, upper 230mm, 11kW 5) horizontal, upper 230mm, 7.5kW 6) horizontal, lower 230mm, 11kW - all spindles adjustable up/down, left/right - spindle 4 and 5 with electric up/down adjustment - spindle speed 8000 rpm - spindle diameter 40mm - all spindles equipped with an electric brake Gkodpfxezwwc Is Aivoc - 6 feed rollers from above, pulling, toothed, including 1 double roller - feed roller from above, pulling, rubber, double - feed roller from below, pulling, rubber, double - side pressure - feed on Cardan shafts - rollers pressed pneumatically - stepless feed speed adjustment 6-24m/min - feed motor 4kW - electric adjustment of planing thickness - body lifting motor 0.55kW - central lubrication of the table - diameter of dust extraction nozzles 6x140mm - dimensions L/W/H 4900x2400x2000mm - weight approx. 4000kg ADVANTAGES - German production, WEINIG brand - with 6 heads - unpainted - used planer, very good condition Original photos Net price: 122900 PLN Net price: 28580 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: excellent (used), functionality: fully functional, working width: 400 mm, planing height: 100 mm, planing width: 350 mm, Four-sided machining size: 350mm x 100mm. It has a fifth horizontal 400mm axis, which can be used for series cutting. Total power: 24Kw. It can be tested, it is in excellent technical condition. Gkedpfx Asyt Hbysivoc

Condition: reconditioned (used), functionality: fully functional, Refurbished four-sided planer and moulder from SCM GROUP. This four-shaft machine enables high-quality and precise planing and is equipped with a soundproof safety enclosure. Its simple and proven construction ensures long service life and consistent performance. The machine is designed for small workshops producing simple battens, semi-finished products for panel gluing, machining of window scantlings, etc. Thanks to its capacity, this four-side planer is also suitable for pre-processing before a machining center for window manufacturing. Maximum workpiece dimensions: 180 x 105 mm Gkedpfx Aiswbgtgjvjc Aluminium planing heads included in the machine price Suitable for profile tools up to 10 mm Includes optional press roller in front of the tool Technical data: - Working width min/max: 23 / 180 mm - Working height min/max: 6 / 105 mm - Useful length of vertical/horizontal working spindles: 120 / 190 mm - Axial spindle adjustment: 15 mm - Motor power (horizontal spindles): 7.5 kW - Motor power (vertical spindles): 5.5 kW - Feed motor power: 1 kW - Infeed table length: 1700 mm - Feed speed: 6/12 m/min - Spindle speed: 6000 rpm - Tool diameter: 100 mm - Spindle diameter for tool mounting: 35 mm - Feed roller diameter: 120 mm - Extraction connection: 160 mm - Weight: 1200 kg Please note: The status of refurbishment and the machine’s readiness for collection must be verified in advance! Stock location: Telnice near Brno Naturally, machine testing, demonstration, and operator training are included.

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, spindle diameter: 40 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 8,000 rpm, input voltage: 400 V, number of spindles: 5, table width: 230 mm, Equipment: motor brake, The machine was installed at the plant in 2024. The planer was purchased by us as new and installed at the plant in January 2024. Due to a change in the technological requirements of our production, it was replaced with a different model. The reason for the sale is a change in the plant’s needs. The machine is in very good technical condition and ready for operation. Gkedpez Rz Hvsfx Aivec

Condition: good (used), WEINIG Quattromat four-sided planer max planing width 220mm Gkodev Hqn Tepfx Aivec max planing height 120mm 4 heads, heads included bottom spindle - 4KW, right and left 7.5KW, top - 5.5KW feed on cardan shafts with smooth adjustment electric lifting up and down electric adjustment of planing width branded machine preserved in good condition

Condition: excellent (used), CATALOGUE NUMBER 8034 TECHNICAL DATA - max. width of workpiece – upper shaft 510mm - max. width of workpiece – lower shaft 450mm - max. thickness of workpiece, 2-sided 200mm – from above: - deflectors - 1 metal, toothed feed shaft - 2 metal, sequential feed shafts - 1 metal, toothed feed shaft - pressure roller - 510mm planing shaft, 4 knives, with the possibility of installing profile knives, approx. 7.5kW - pressure roller - smooth, metal feed shaft - upper pressure roller at the outlet, with 2 rubber feed rollers – from below: - adjustable infeed table with guide - smooth, metal, sliding roller - 450mm planing shaft, 4 knives, 7.5kW - 2 smooth, metal feed shafts – from the rear: - 2 side spindles 1) vertical right 200mm, 6.6kW 2) vertical left 200mm, 6.6kW - spindle diameter 40mm - 2 heads included - spindles adjustable up/down, left/right - axes arranged in alternating positions Gkodpfszu R Thjx Aivec - electric height adjustment - 2 types of feed speeds + stepless 5-13, 13-36m/min - diameter of dust extraction nozzle 2x125mm, 145mm, 130mm - dimensions L/W/H 3200x1740x1650mm + control panel - weight 2100kg ADVANTAGES – Made in Portugal – Electric table lifting – Ideal for processing wet and dry wood – 2 planing shafts + 2 spindles – Very good condition – Used planer Net price: 48900 PLN Net price: 11372 EUR depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7220 TECHNICAL DATA - min – max width of workpiece: 20 – 230mm - min – max height of workpiece: 8 – 160mm 7 spindles: 1) horizontal, lower: 230mm, 5.5kW 2) vertical, right: 160mm, 5.5kW 3) vertical, left: 160mm, 5.5kW 4) vertical, right: 160mm, 5.5kW 5) vertical, left: 160mm, 5.5kW 6) horizontal, upper: 230mm, 7.5kW 7) horizontal, lower: 230mm, 7.5kW - all spindles adjustable up/down, left/right - spindle diameter: 40mm - spindle speed: 6000 rpm From above: - 10 toothed, metal feed rollers, including 2 double rollers - 3 side pressure rollers From below: - side pressure roller at the infeed - toothed, feed roller, rotatable in the lower bed - 2 side pressure rollers - grooved bed - toothed, metal feed roller Gksdoztzd Uepfx Aivsc - smooth, metal feed roller - pneumatically adjustable rollers - length of infeed bed: 2410mm - central lubrication of the bed - electric adjustment of cutting depth - lifting motor: 1.1kW - stepless feed speed adjustment via inverter: 6-30 m/min - feed motor: 5.5kW - feed via Cardan shafts - enclosed in a cabinet - diameter of dust extraction port: 7x160mm - dimensions (L/W/H): 5100x2190x1800mm - weight: 5400kg ADVANTAGES – with 7 heads – ideal for both wet and dry wood – DTR documentation available – used planer, very good condition Net price: 138900 PLN Net price: 32300 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may be subject to change in case of significant exchange rate fluctuations)

Condition: good (used), Year of construction: 2000, Leadermac LMC 523 Smartmac four side planer - year of production 2000 - DTR - electronic height and width adjustment - possibility to save permanent parameters TECHNICAL PARAMETERS: - planing width 230 mm - planing height 140 mm - diameter of the spindles 40 mm 1 lower spindle 7.5 kW 2 right spindle 5.5 kW 3 left spindle, 5.5 kW 4 upper spindle 7.5 kW 5 lower spindle 7.5 kW smoothly adjustable feed 3 kW feed motor power electronic height adjustment electronic adjustment of the left head feed on cardan shafts five top steel pull rollers two upper rubber pulling rollers Godpfxsifftxe Aivjkc one role in the table top pulling pneumatic material pressure minimum material length 400 mm length of the preliminary table 2000 mm chrome tables stub diameter 5 x 125 mm Machine dimensions 370 x 200 x 190 cm weight ~ 3000 kg

Condition: like new (used), Year of construction: 2021, number of spindles: 5, Technical Specifications Gkedpsz N Apijfx Aivsc Four-sided planer KUPER SWT XL-5 Manufacturer: KUPER – Heinrich KUPER GmbH, Germany Model: SWT XL-5 Year of manufacture: 2021 Supply voltage: 400 V Frequency: 50 Hz Power supply: three-phase Rated current: 63.1 A Electrical diagram number: K810-03146 Intended use: planing and profiling of solid wood components, including boards, strips, and other profiled elements. Technical condition: like new, requires minor refurbishment. It has only produced approximately 100 m3 of paneling profiles. I also have a cutting/end-trimming machine listed in another offer.

Condition: excellent (used), Year of construction: 1995, Weinig Profimat 23E four side planer - German production - year of production 1995 - right and left spindles with a face milling cutter ensuring parallelism and a right angle of 900 - element width measurement - electronic width adjustment TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm electronic planing width control 1 lower spindle 4 kW Gkedpfxjibq Nis Aivjc 2 right spindle 4 kW 3 left spindle 4.2 kW (face milling) 4 spindle right 4.2 kW (face milling) 5 upper spindle 7.5 kW element width measurement electric height adjustment of the feed rollers electric height adjustment of the upper spindle spindle diameter 40 mm six top steel rollers yen top roller, rubber one roll in the table top pulling pneumatic pressure feed on cardan shafts pre-table length 2470 mm diameter of nozzles 140 mm Machine dimensions 456x240x220 weight 4000 kg

Condition: excellent (used), WEINIG HYDROMAT 22 AL four-sided planer - max. workpiece width 220mm - max. workpiece height 130mm - 8 spindles: 1) horizontal lower 220mm, 5.5kW 2) vertical right 130mm, 7.5kW 3) vertical left 130mm, 7.5kW 4) vertical right 130mm, 5.5kW 5) horizontal upper 220mm, 11kW – 5th spindle adjustable electrically up/down 6) horizontal lower 220mm, 5.5kW 7) horizontal lower 220mm, 5.5kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) universal 220mm, adjustable 360°, 7.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm - from above: - 6 infeed rollers, double-toothed, pulling + 1 single - 3 outfeed rollers, pulling, rubber, smooth double + 3 single - meter counter - from below: - infeed roller, toothed, pulling, pivoting in the lower bed - 3 metal rollers, pulling, smooth - feed on Cardan shafts - rollers with pneumatic pressure - stepless feed speed adjustment + 2 speeds 10-60m/min - feed motor 10kW - electric thickness setting - body lifting motor 0.75kW - central lubrication of the bed - diameter of dust extraction nozzles 5x140mm, 3x 120mm - machine dimensions L/W/H 4680x1780x1850mm - control cabinet dimensions (on pallet) 1020x1000x2230mm - weight approx. 5000kg - Feeder with centering device: - roller width 450mm - 1 toothed pulling roller at the inlet - 22 smooth pulling rollers - adjustable pressure from above - feeder length 9020mm - stepless speed adjustment 10-60m/min - motor 0.75kW - dimensions L/W/H 9020x790x1150mm Gkodpfx Aiozyl T Tsvec Net price: 179900 PLN Net price: 41850 EUR, depending on the exchange rate of 4.30 EUR (Prices may change with higher fluctuations)

Condition: excellent (used), Catalog number 6368 TECHNICAL DATA - max. width of workpiece 230mm - max. height of workpiece 130mm 7 spindles: 1) horizontal, lower 230mm, 5.5kW 2) vertical, right 130mm, 5.5kW 3) vertical, left 130mm, 5.5kW 4) horizontal, upper 230mm, 7.5kW 5) horizontal, upper 230mm, 11kW 6) horizontal, lower 230mm, 18.5kW 7) universal 230mm, adjustable at 360 degrees, 5.5kW - all spindles adjustable up/down, left/right - all spindles equipped with an electric brake - spindle diameter 40mm - spindles 4 and 5 adjustable electrically up/down - from above, 8 feed rollers, metal, twisting, including 2 double rollers - from above, 4 feed rollers, rubber - from above, 2 pressure rollers Gjdpfxjztzgie Aivjkc - from below, pawls - from below, on the side, 3 pressure rollers - from below, 2 metal rollers, smooth, feed rollers - from below, 2 double rollers, feed rollers, rubber - rollers pneumatically pressed - feed mechanism on cardan shafts - stepless feed speed adjustment 5-36m/min - feed motor 4kW - electric adjustment of planing thickness 0.75kW - length of infeed table 1980mm - enclosed in a cabinet - central lubrication of the table - dust extraction nozzle diameters 5x120mm, 2x150mm - dimensions (L/W/H) 5500x1840x1900mm - weight approximately 5000kg ADVANTAGES – Italian made – with 7 heads – for wet and dry wood – last spindle is universal – unpainted – used planer, very good condition Net price: 116900 PLN Net price: 27190 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary depending on exchange rate fluctuations)

Condition: excellent (used), Catalog number: 6338 TECHNICAL DATA - Max. width of workpiece: 230mm - Max. height of workpiece: 160mm 7 spindles: 1) Horizontal, lower: 230mm, 5.5kW 2) Vertical, right: 160mm, 5.5kW 3) Vertical, left: 160mm, 5.5kW 4) Horizontal, upper: 230mm, 7.5kW 5) Horizontal, upper: 230mm, 7.5kW 6) Horizontal, lower: 230mm, 7.5kW 7) Universal: 360°, 230mm, 7.5kW - All spindles adjustable up/down, left/right - Spindle diameter: 40mm - All spindles equipped with a brake - Spindle speed: 6000 rpm Top: - 6 toothed, metal feed rollers, including 2 double rollers - 4 rubber feed rollers, including 1 double roller - 3 pressure rollers at the outlet Bottom: - Side pressure roller at the inlet - Toothed, feed roller, swiveling in the lower bed - 3 smooth, metal feed rollers - Rollers adjustable pneumatically - Length of the feed table: 1190mm - Central lubrication of the table - Electric adjustment of the cutting depth - Body lifting motor: 0.56kW - Smooth adjustment of the feed speed on an inverter: 6-24m/min - Feed motor: 3.7kW - Feed on Cardan shafts - Enclosed in a cabinet - Diameter of the dust extraction nozzle: 7x125mm Gedpfx Aeztzgpeivokc - Dimensions (L/W/H): 5100x2070x1900mm - Weight: approx. 5000kg ADVANTAGES – 7 heads – Universal spindle – Ideal for wet and dry wood – Spindles equipped with brakes - DTR documentation – Used planer, very good condition Net price: 115900 PLN Net price: 26960 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary with higher fluctuations)

Condition: reconditioned (used), Working width 230 mm Working height 15-120 mm Number of spindles 2 St. Weinig Hydro Planer Type Uniplan 23 ----- Machine was factory overhauled by Weinig in 2024. Description: For two-sided horizontal woodworking with two working spindles. Spindle arrangement: horizontal, bottom and top. The two horizontal spindles are equipped with hydraulically tensioned counterbearings without axial adjustment. Built-in straight jointers on both spindles with automatic stone feed, remotely controlled with the hood closed. Machine with continuous, chainless feed, equipped with rubber rollers. Electric up/down adjustment of the spindles according to a mechanical digital display (SIKO). On/off switch for limiting the up/down adjustment. Feed roller pressure Gjdpsxpn Tzefx Aivekc pneumatic. Stops and table tops are not adjustable. Machine with steel table tops. Machine with full enclosure and integrated sound and dust protection including interior lighting. Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN 60204, IEC - 204 - 1. Other electrical regulations are not taken into account. Machine includes operating tools, but does not include machining tools. The Weinig Uniplan spindles operate at a speed of 7200 revolutions per minute. Before using existing tools, please check that they are suitable for the speed. Please also consider this when ordering new tools. Technical specifications Max. working width: 230 mm Min. working height: 15 mm, max.: 120 mm Feed: 3 kW (4 HP) Horizontal spindles each: 7.5 kW (7.5 HP) Infinitely variable feed speed: 6 - 36 m/min. Spindle speed: 7,200 rpm Spindle diameter: 50 mm Tool clamping length: 240 mm Maximum tool radius: 163 mm Fixed clamping clearance at bottom: 0.5 mm (Technical data according to the manufacturer - no guarantee!)