Used 4 Sided Moulder for sale (44,686)

Condition: ready for operation (used), Year of construction: 1983, Brand: Weinig Itelhevydwzoccqtjg Model: U 17 A Machine no: 1387-2940 Year of manufacture: 1983 Working height: 1700 mm Working width: 1200 mm 7 spindles in order: Below (4 kW, 5.5 hp), Right (4 kW, 5.5 hp), Left (5.5 kW, 7 hp), Right (4 kW, 5.5 hp), Above (5.5 kW, 7 hp), Under (4 kW, 5.5 hp), Universal (5.5 kW, 7 hp) 40 mm spindles Tiltable feeding-unit Variable feed speed: 6-36 m/min Switch for the security fence Infeed path for planer Brand: Sacot Length: 4000 mm Width: 200 mm Output table Length: 3500 mm Width: 200 mm Lifting table Length: 2350 mm Width: 1200 mm Stock no: 2002037BXM

Year of construction: 1996, Condition: reconditioned (used), machine/vehicle number: 16319, max. machining dimensions 220 x 120 mm (raw wood dimension max. 230 x 130 mm) min. machining dimensions 15 x 6 mm, automatic positioning "Hecht-Posiomat", feed rate 6 - 22 m/min, feed roller pressure 6 bar, spindle diameter D = 40 mm, max. chip removal 10 mm feed table 2.000 mm, feed motor 2,2 kW, Itslhsh Euvmoccqtsg height adjustment 0,37 kW, dressing spindle 4 kW, joining spindle 4 kW, left profile spindle 4 kW, thickness spindle 5,5 kW, glazing bead separation, ex location Seevetal, in "as is" condition as viewed, subject to prior sale, without freight and packing

Year of construction: 2024, Condition: new, - With 5 spindels - Grooved table for short pieces Outstanding characteristics: Sealed safety hood to reduce noise levels and prevent chips from splash Adopting stepless variable feed speed, inverter feed speed of 6- 30 m/min Each spindle driven by independence motor with powerful cutting To fit with heavy – duty cutting as equipping with two pairs of high precision bearing at two ends of spindle assembly Centralized spindle adjustment on the front panel is easy to work Hard Chromed electro plated treatment has been adopted for the durability of the work table surface Short feeding device is equiped for smooth feed avaliably Bottom driving roller to improve feeding performance Pneumatic pressure feed wheel can be seperately adjusted, make for feed pieces with various thickness Manual oil pump to lubricate the working tables and slides, to be easy to centralized control Pre- trimming cutter on the first bottom shaft and teethed work table was designed to reduce the noise level effectively and cut out the precise linearity Removable work table of vertical spindle was designed of dust proof of efectively protect the screw bar from pollution Special hardness treatment of HRC 58 has been adopted on the work table beside of the first bottom spindle for increasing the durability and natural life of the work table surface Adopting electric component from international class with steady quality TECHNICAL SPECIFICATIONS: - Working width (min): 20 mm - Working width (max): 240 mm Ielhcegp Dcqscqtetg - Working thickness (min): 8 mm - Working thickness (max): 180 mm - Number of spindels: 5 kos - spindle speed: 6000 r/min - Diameter of Spindle: 40 mm INSTALLED CUTTER-BLOCKS (from first to last): - first bottom spindle: diameter 108- 145 mm - right spindle: diameter 108- 200 mm - left spindle: diameter 108 -200 mm - first top spindle: diameter 108- 200 mm - second bottom spindle: diameter 108- 200 mm MOTOR POWER: - first bottom spindle 5,5 KW (7,5 HP) - right spindle 5,5 KW (7,5 HP) - left spindle 7,5 KW (10 HP) - first top spindle 7,5 KW (10 HP) - second bottom spindle 7,5 KW (10 HP)

Condition: ready for operation (used), Brand: SCM Model: P-230-S Feeder: Mahros Type: Ben200 8 spindle planer SCM with feeder Mahros, safety curtain and spare parts. Tech. info: Capacity: Max working width 230mm Max working height 120mm Spindles in order: below (4 kW, 5.5 hp), right (5.5 kW, 7.5 hp), left (7.5 kW, 10 hp), right (5.5 kW, 7.5 hp), above (7.5 kW, 10 hp), left (5.5 kW, 7.5 hp), above (7.5 kW, 10 hp), below (7.5 kW, 10 hp) Spindle diameter 40mm Max. diameter of tools that can be mounted under the work table: 190 mm Variable feed speed 10-50m/min Cardan driven with pneumatic pressure on feed wheel Feed motor power: 4.4/5.5 kW Motor power for raising/lowering: 0.55 kW (0.75 hp) Brake in the engines Elecricity: 400 volts, 3 phase, 50 Hz Machine dimensions: Length: 5900 mm Width: 1800 mm Height: 1600 mm Ielhjtpm S Ejccqtetg Size for transport: 590x210x160 cm Stock no: 2002064BXA

Year of construction: 1994, Condition: excellent (used), 4 side planer 8 8 HARBS heads long table going 3 meters. Machine weight 5500 kg cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm. Itslhjl Dw Nxeccqteg

Condition: excellent (used), CATALOG NUMBER 7626 Technical data: - spindle diameter 30mm - spindle working height 140mm - replaceable spindle - spindle locking - adjustable up/down - original cast iron guide with full adjustment - 6 types of rotation speeds + right/left 3/4/5/6/8/10000rpm - table dimensions 1150x850mm - cast iron table - 5.5kW motor - electric brake - diameter of the exhaust port 120mm, 100mm - dimensions length/width/height 1040x1150x1140mm - weight 580kg ADVANTAGES - German production - used milling machine - very good condition Net price: PLN 7900 Itslhccqswc Nu Aetjg Price net: 1850 EUR depending on the price 4.25 EUR (Prices may change with higher fluctuations)

Condition: used, Year of construction: 2013, Spindle swivels: Yes 0 to 45° Height adjustment: manual / handwheel Itelhcouzkxrjcqtjg Swivel adjustment: manual / handwheel Stop adjustment: manual Height display: Scala Pivot angle display: Scala Milling stop indicator: Scala Spindle diameter: 30 mm Speeds: 3500 / 6500 / 7800 rpm Motor power: 4 kW Motor brake: Yes, automatic Suction connection: 2 x 120 mm Machine length: approx. 1200 mm Machine width: approx. 900 mm weight:

Condition: good (used), mileage: 643,384 km, power: 294 kW (399.73 HP), first registration: 09/2016, fuel type: diesel, color: white, axle configuration: 6x2, fuel: diesel, wheelbase: 5,650 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, loading space width: 2,500 mm, loading space length: 67,500 mm, loading space height: 2,670 mm, Year of construction: 2016, Equipment: air conditioning, cruise control, parking heater, soot filter, spoiler, Technical information Number of cylinders: 6 Engine capacity: 10.677 cc Drivetrain AdBlue system: Yes Axle configuration Front axle: Max. axle load: 9000 kg; Steering Rear axle 1: Double wheels; Max. axle load: 11500 kg Rear axle 2: Lift axle; Max. axle load: 7500 kg; Steering Measures Dimensions (LxW): 890 x 255 cm Weights Empty weight: 10.345 kg Carrying capacity: 17.655 kg GVW: 28.000 kg Maintenance, history and condition APK (MOT): tested until 09/2025 Technical condition: good Visual appearance: good Identification Registration number: 18-BHN-9 Additional information Itjlowifi Aohccqtog Please contact Pedro or Arie for more information

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: A04-0040, TECHNICAL DETAILS Number of spindles: 9 Additional sanding unit: Yes Multiple processing: 9 spindles allow for comprehensive processing of the wood in a single pass. Surface processing: Sanding unit ensures a smooth and fine surface of the processed wood. Feed rate with sanding: 5-8 m/min Feed rate without sanding: up to 25 m/min Spindle configuration Itjlhccqowhlaletsg Spindle 1: bottom Spindle 2: right Spindle 3: left Spindle 4: left Spindle 5: left Spindle 6: left Spindle 7: right Spindle 8: top Spindle 9: right Sanding unit: bottom Sanding unit: top MACHINE DETAILS Dimensions: 8,230 x 1,460 x 2,200 Installation dimensions: approx. 9,276 x 2,630 x 3,000 mm EQUIPMENT Various planing heads expand the machine's flexibility and application possibilities.

Condition: repair required (used), Year of construction: 2016, Functionality: fully functional, machine/vehicle number: 21081, automatically feedable machines plane and chamfer up to 4 part sides simultaneously in one operation. Depending on the use of the timber, the operator or a joinery program can also preselect only 1, 2 or 3 sides or partial areas. The planning data can be transferred from Hundegger joinery machines as well as from CAD programs or can be entered directly on the mobile control panel. Ioljwg Rg Ijhccqtstg cost associated to insurance, freight, installation, transport not included in the price.

Condition: used, Year of construction: 1993, spindle diameter: 40 mm, planing width: 187 mm, working height: 112 mm, 4-sided planer gone due to purchase of new planer. Very good machine, is still used daily. Ijlhccsv Uwluoqtjtg

Condition: used, Number of spindles 5 St. Working width 20 - 230 mm Working height 8 - 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5 - 30 m/min. Control CNC Weinig Unimat 500, window version ----- Machine will be cleaned and completely checked. Short summary: ----- 5 spindles with option for glass bead removal Left and upper spindle controlled for width and height: 2 axial and 2 radial CNC-controlled adjustment and positioning of the spindles in conjunction with the memory function Islovnwbiehccqtetg CNC-controlled adjustment and positioning of the feed up/down in conjunction with the memory function Working width (with tool flight circle 125 mm) 20-230 mm Working height (with tool flight circle 125 mm) 8-120 mm Technical manufacturer description: ----- 1st spindle ----- First lower horizontal spindle Motor with brake 5.5 KW (7.5 HP) Diameter 40 mm Speed ??6,000 rpm Tool flight circle 125 - 145 mm Axially adjustable travel 5 mm Folding device, including folding cutter Table insert hardened in front of 1st lower spindle 2nd spindle ----- First right vertical spindle Motor with brake 7.5 KW (10 HP) Common motor with left vertical spindle Diameter 40 mm Speed ??6,000 rpm Tool flight circle 40 mm below table level 100-200 mm Tool flight circle 55 mm below table level 100-180 mm Max. tool diameter behind stop level 180 mm Maximum throat depth 35 mm Axially adjustable range 60 mm Right spindle pneumatically controlled axially (40 mm) via selector switch, max. saw diameter 200 mm 3rd spindle ----- First left vertical spindle Common motor with 1st right vertical spindle Diameter 40 mm Speed ??6,000 rpm Tool flight circle 40 mm below table level 100-200 mm Tool flight circle 55 mm below table level 100-180 mm Maximum throat depth 35 mm Axially adjustable range 60 mm Axially adjustable range 60 mm 4th spindle ----- First upper horizontal spindle Motor with brake 5.5 KW (7.5 HP) Diameter 40 mm Speed ??6,000 rpm Tool flight circle 112-200 mm Tool flight circle for straight cutter heads max. 180 mm Maximum throat depth 35 mm Axially adjustable range 40 mm Split pressure shoe in front of upper spindle, adjustable to tool flight circle and swinging away from the tool, spring-loaded. Pressure shoe in front of and discharge after the upper spindle with electronic digital displays, integrated in the memory function or the PowerCom. Upper horizontal spindle pneumatically controlled axially (40 mm) using a selector switch, max. saw diameter 200 mm Glass bead removal to upper spindle, pneumatically controlled up/down. 5th spindle ----- Second lower horizontal spindle Motor with brake 4 KW (5.5 HP) Diameter 40 mm Speed ??6,000 rpm Tool flight circle 112-200 mm Maximum throat depth 15 mm Axially adjustable range 35 mm Spindles in general ----- All throat spindles dynamically balanced for high concentricity. 5 quick-release spindle nuts Joint control of the right spindle axial, upper spindle axial and the glass bead removal pneumatically controlled up/down. Feed system ----- Frequency-controlled feed, infinitely variable with brake 4 KW (5.5 HP) F...

Condition: used, mileage: 175,737 km, power: 265 kW (360.30 HP), first registration: 12/2017, overall weight: 26,000 kg, fuel type: diesel, color: blue, axle configuration: 3 axles, next inspection (TÜV): 05/2027, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, air conditioning, crane, Internal vehicle no.: G300031 German vehicle More information at * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Steering and lifting axle HIAB Jonsered J 1300RS 79 crane (radio control not available) Year of production - 2021 Load moment -126 kNm Max. standard extension - 7.95 m Lift capacity -1.62 t at max. reach 7.9 m Max. load capacity - 3.1 t at 3 m radius Support - H 3 m = 3100 kg 4 m = 3050 kg 5 m = 2550 kg 6 m = 1860 kg 7 m = 1770 kg 7.9 m - 1620 kg KINTEC KG 25-2*800 Grab Load capacity - 450 kg Capacity - 480 l Financing example: * Internal number: G300031 * Purchase price: ¤79,900.00 * Down payment: 10% * Term: 60 days * Monthly installment: ¤1,251.42 Residual value: ¤15,980.00 If you are satisfied with this offer or would like to customize it to your needs, please contact us at Mr. Enchev. We look forward to your call. Subject to errors and omissions. We are happy to accept your used vehicle as part payment. Financing is available directly from us. GOLEC NUTZFAHRZEUGE GMBH Itslhswllx Neccqtog We speak: German, English, Spanish, Polish, Ukrainian, Russian, and Bulgarian.   ----.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 5 h, Functionality: fully functional, Brush Sander Manufacturer: Cosma Type 300 H4 C Year of manufacture: 2023 (demonstration machine with warranty!) Brush sander for 4-sided sanding of strips, scaffolding boards, profiled timber, etc. Working height: 900 mm Working width for 4-sided sanding: 300 mm 2 cylindrical brush units (top and bottom), each 2.2 kW, 1000 rpm. 2 side disc brush units, each 0.37 kW, 750 rpm. Manual height adjustment of the units Adjustable feed rate, approx. 2 - 10 m/min. Control panel: Iolhccewkqmpsqtotg -Brush on/off -Transport speed Product dimensions: Minimum product length: 800 mm Maximum product width: 300 mm Height: 20 - 100 mm

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 160 mm Length of the planing table 1050 mm Feed motor 7 kW Feed speed 6-40 m/min. Weinig Powermat 1200 ----- with infeed automation Weinig wheel magazine EM 100 and linked with outfeed automation Weinig High-Mech A 1 The machine will be completely checked in our warehouse before delivery! Detailed description: ----- 1. Weinig planer and moulder Powermat 1200 ----- Technical data: ----- Working width 20 - 230 mm (with tool flight circle 93 - 163 mm) Working height 10 - 160 mm (with tool flight circle 93 - 163 mm) 1. Spindle ----- First lower horizontal spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 125 - 180 mm In conjunction with PowerLock 93 - 180 mm Tool flight circle rebate cutter 130-160 mm Axially adjustable range 17 mm Folding device MarathonCoating in front of 1st lower tool holder 2nd spindle ----- First right vertical spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 93 - 200 mm Maximum throat depth 35 mm Axial adjustment range 80 mm Radial adjustment range Min. tool diameter on stop plane 93 mm Max. tool diameter behind stop plane 200 mm 3rd spindle ----- First left vertical spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 93 - 200 mm Tool flight circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Axially adjustable travel 80 mm Pressure shoe in front of left tool holder, including 2 side pressure rollers, spring-loaded Itjlhccovnwbcjqtog 4th spindle ----- First upper horizontal spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 93 - 200 mm Tool flight circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Axially adjustable travel 40 mm Split pressure shoe in front of upper tool holder on tool flight circle adjustable and swinging away from the tool, spring-loaded. Upper spindle prepared for later installation of the cassette system 5th spindle ----- Second upper horizontal spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 93 - 200 mm Tool flight circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Axially adjustable travel 40 mm Split pressure shoe in front of upper tool holder on tool flight circle adjustable and swinging away from the tool, spring-loaded. Upper spindle prepared for later installation of the cassette system 6th spindle ----- Second lower horizontal spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 93 - 225 mm Maximum throat depth 15 mm Axially adjustable travel 40 mm Radial adjustable travel Min. tool diameter to table level 93 mm Max. tool diameter 6 mm below table level 225 mm All spindles with high concentricity. Lubrication points for the axial tool holder movement. Feed system ----- Electronic feed, infinitely variable with brake 6-4...

Condition: used, mileage: 240,000 km, power: 294 kW (399.73 HP), first registration: 02/2014, overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, next inspection (TÜV): 05/2027, gearing type: mechanical, emission class: euro5, Year of construction: 2014, Equipment: ABS, air conditioning, crane, Internal vehicle number: FG91523 German vehicle On the way to our yard in Kaufungen - Kassel, Germany, available immediately. More information from Luis Lucena. Steering and lifting axle ATLAS 172.3E crane 1.92 m - 6500 kg 4.30 m - 3770 kg 6.20 m - 2580 kg 8.10 m - 1980 kg 10.10 m - 1520 kg *Optional Grapple Unladen weight approx. 14,500 kg Dautel Bordmatic body Errors excepted. Itjlhjwkl Iboccqteg We are happy to accept your used vehicle as part payment. Financing is available directly from us. GOLEC COMMERCIAL VEHICLES GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.   ----.

Condition: new, Number of spindles 6 St. Working width 250 mm Working height 150 mm Length of the planing table 2500 mm Itslovnv Ubohccqteg Feed motor 4 kW Feed speed 6-24 m/min. weight 4770 kg Dimensions (L/W/H) 4722x1860x1776 mm Vierseitenhobelmaschine Kuper SWT XL-6 in Fenster-Version mit elektronischer Axial- und Radialverstellung der Spindeln. Schwerer Maschinenständer, verwindungsfrei und schwingungsarm. Anzahl der Spindeln: 6 Arbeitsbreite: 250 mm Arbeitshöhe: 150 mm Abrichttischlänge: 2500 mm Spindeldrehzahl: frequenzgeregelt 4.000 - 8.000 U/min Vorschubgeschwindigkeit: 6-24 m/min Ausführliche Beschreibung finden Sie in nebenstehender PDF-Datei! (Technische Angaben laut Hersteller - ohne Gewähr!)

Condition: used, Number of spindles 5 St. Working width 220 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 6 kW Feed speed 6-22 m/min. total power requirement 25 kw Dimensions (L/W/H) 3500 x 1500 x 1600 mm weight of the machine ca. 2000 kg 1 WEINIG four-side planer Type PROFIMAT 22 N with 5 spindles ----- Working width 220 mm, working height 120 mm Still in use, can be viewed Spindle arrangement: 1st spindle bottom 4.0 kW, 2nd spindle right and 3rd spindle left 7.5 kW, 4th spindle top 5.5 kW, 5th spindle bottom 4.0 kW Spindle diameter 40 mm, Feed 3 kW, continuously adjustable from 6 - 22 m/min Ioljv Irizjhccqtjtg Special equipment: Cardan drive Profiling package Includes 5 used planer heads. (Technical specifications according to the manufacturer, without guarantee!)

Condition: used, Year of construction: 2000, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 + 500 mm Feed motor 3 kW Feed speed 6-36 m/min. 1 WEINIG Unimat 23 E 4-side Planer and Moulder ----- 6 spindles (2 on the right), powerful motors, EM 11 feed magazine available Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle, bottom 7.5 kW ----- Diameter 40 mm Speed ??6000 rpm Tool travel radius 125 - 180 mm Folding device including tool Hardened table insert in front of 1st lower spindle 2nd spindle, right 11.0 kW ----- Shared motor with left vertical spindle Ielhcewh Umzscqtetg Diameter 40 mm Speed ??6000 rpm Tool travel radius 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axis adjustment range 80 mm 3rd spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??6000 rpm Tool cutting radius 112-200 mm Max. groove depth 35 mm Axis adjustment range 80 mm Pressure shoe in front of left spindle, including lateral roller pressure, spring-loaded 4th spindle, right 7.5 kW ----- Diameter 40 mm Speed ??6000 rpm Tool cutting radius 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axis adjustment range 80 mm 5th spindle, top 11.0 kW ----- Diameter 40 mm Speed ??6000 rpm Tool cutting radius 112-200 mm Max. throat depth 35 mm Axis adjustment range 45 mm Split pressure shoe in front of the upper spindle, adjustable to the tool travel circle and pivoting away from the tool, spring-loaded. 6. Lower spindle 7.5 kW ----- Diameter 40 mm Speed ??6000 rpm Tool travel circle 112-250 mm Max. throat depth 15 mm Axis adjustment range 45 mm Spindles in general ----- All throat spindles with high concentricity. Lubrication points for the axial spindle movement. Spindle length of vertical spindles 170 mm Feed system ----- Motor with mechanical brake, 3 kW Mechanical feed continuously adjustable 6 - 36 m/min. Feed roller in front of the first lower tool pneumatically controlled up-down, Durofer pointed tooth rollers (Weinig patent) with depth gauge and self-cleaning Adjustment range of the feed rollers relative to the left spindle, axial: 35 mm Extension of the oscillating axis relative to the left spindles to 150 mm Machine electrical system ----- Operating voltage: 380-400-415 volts, 50 Hz. Machine stands, tables, and stops ----- Surface table 2.5 m long (including jointing ruler) Aluminum extension 0.5 m for surface table, including extension of the jointing ruler Manual Waxilit pump for resin removal from the table One driven rubber roller (spring-mounted in the outfeed table) Pressure elements and Guides ----- Pneumatic pressure rollers from above Pneumatic pressure rollers pivot away from above, opposite the right-hand spindles for easy tool changes Machine Operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Discharge after the upper spindle with mechanical digital display. ATS/E system, automatic 2-axis positioning for spindles 3 and 4 Min. working height 12 mm Electric height adjustment of the upper spindles and the feed Central position ...

Condition: used, Number of spindles 4 St. Working width 260 mm Working height 160 mm Length of the planing table 2000 mm Feed speed 6-12 m/min. total power requirement 28 kw Dimensions (L/W/H) 3.300 x 1.600 x 1.700 mm Dust suction hood 1 x 250 mm Weinig Cube four-side planer ----- Machine is cleaned and checked. Technical data ----- Working width 20 - 260 mm Working height 8 - 160 mm (with tool flight circle 125 mm) Spindles ----- WEINIG Easylock with precision reversible knives in HSS for quick and convenient knife changing. You have never changed a knife so quickly. Customer benefits: - no adjustment necessary - short downtimes - no adjustment errors - easy to use Motor strengths: 1st spindle bottom: 7.5 kW 2nd spindle left + 3rd spindle right common motor 11.0 kW 4th spindle bottom: 7.5 kW Feed system ----- Frequency-controlled feed, infinitely variable 6 - 12 m/min Durofer pointed tooth rollers with depth limiter and self-cleaning Pneumatic pressure for feed rollers, including water separator Cycle-controlled dressing to support manual dressing. The feed roller is released after the second feed roller has gripped the workpiece. After leaving the second feed roller, the feed roller is brought into the starting position for the next workpiece. Machine electrical system ----- Operating voltage 400 volts (voltage range 380 - 420 volts), 50 hertz Electrical design according to DIN VDE 01 13, electrical equipment of industrial machines EN60204, IEC- 204-1. Other electrical regulations are not taken into account. Before operating frequency-controlled devices and systems, the customer must install an all-current-sensitive residual current device in accordance with DIN/ VDW 0100-482 in operating facilities at risk of fire Control of the extraction system via the machine software Machine stands, tables and stops ----- Planting table 2.0 m long (including jointing tine) One sliding roller in the outfeed table Automatic lubricant supply Itelhccqowhf Ivjteg for removing resin from the table, including 5 liters of lubricant. - controlled by incoming and outgoing wood - lubricant quantity dependent on the set planing width - controlled by running meters traveled - improved transport of individual parts - reduction in contamination from resinous wood - extremely easy to use One sliding roller in the outfeed table MPV - MoulderPreView ----- Optical projection of the finished dimensions onto the raw part before processing. - Dimensional control before planing - Consideration of deflection and curvature when setting - Quick correction of the planing and joining Customer benefits: - Assessment of the workpieces before processing - Higher product quality - Visual inspection Machine operation ----- The clear software was specially developed for the CUBE. Thanks to the intuitive operation, training is not necessary. What can the CUBE software do: - Lightning-fast setting of the workpiece dimensions - Motorized setting of the planing and joining - Clear layout, large symbols - Memo function The last 10 dimensions are saved and can be repeated if necessary. - stepless adjustment of the feed rate - ...

Condition: used, Number of spindles 6 St. Working width 230 mm Itslhccqou Su Hujteg Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig four-side planer Profimat 23 window version with glazing bead removal, ATS control and program control ----- Machine will be checked ! Technical data summary (please inquire about any additional accessories included) ----- Generally ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pieces. > Dressing table length: 2500 mm > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically clocked up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: Glass bead saw pneumatically up and down Spindle description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: Glass bead saw 2.2 kW, 6000 rpm, 40 mm diameter Other features ----- > Glazing bead removal > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with program memory 99 programs > Machine operation: window package Joint control of the right spindle and the glazing bead removal via manual selector switch in the control panel > Spindles with mechanical digital display Option: used planer heads (technical data according to the manufacturer - no guarantee!)

Condition: used, Year of construction: 2019, Number of spindles 6 St. Working width 20-230 mm Working height 10-160 mm Feed motor 7 kW Feed speed 5-40 m/min. weight of the machine ca. 3100 kg Weinig Powermat 700 still in use, for inspection including suction unit, pipes and motor for the suction unit ----- Brief summary Manufacturer's description: Working width: 20-230 mm Working height: 10-160 mm Spindle arrangement: Bottom: 2 pieces Right: 1 piece Left: 1 piece Top: 2 pieces Detailed description: ----- Technical data: ----- Working width 20 - 230 mm (with tool flight circle 93 - 125 mm) Working height 10 - 160 mm (with tool flight circle 93 - 125 mm) 1. spindle ----- First lower horizontal spindle Motor 11 KW Diameter 40 mm Speed 6,000 rpm Tool flight circle 125 - 145 mm Tool groove circle rebate cutter 130-160 mm Axial adjustment travel 17 mm Folding device, including rebate cutter MarathonCoating for table insert in front of 1st lower spindle Electronic digital display for radial adjustment 2. spindle ----- First right vertical spindle Motor 7.5 KW Diameter 40 mm Speed 7,000 rpm Tool flight circle 40 mm below table level 93 - 200 mm Tool flight circle 80 mm below table level 93 - 180 mm Tool flight circle for straight cutterheads max. 180 mm Max. Tool diameter behind stop plane 180 mm Maximum moulding depth 35 mm Axial adjustment travel 80 mm Stop lip after the right-hand spindle with quick adjustment Pressure roller from above opposite the right-hand spindle, swivelling away and pneumatic. 3. spindle ----- First left vertical spindle Motor 7.5 KW Diameter 40 mm Speed 7,000 rpm Tool flight circle 40 mm below table level 93 - 200 mm Tool flight circle 80 mm below table level 93 - 180 mm Tool flight circle for straight cutterheads max. 180 mm Maximum moulding depth 35 mm Axial adjustment travel 80 mm Iolhcewgwlwocqtetg Easily removable suction hose Two lateral pressure rollers in front of the left spindle, travelling and spring-mounted Pressure roller from above opposite the left-hand spindle, swivelling and pneumatic Adjustment travel of the feed rollers opposite the left-hand spindle, axial 35 mm Radial CNC-controlled adjustment and positioning of the tool holders in conjunction with the memory function or PowerCom 4. spindle ----- First upper horizontal spindle Motor 11 KW Diameter 40 mm Speed 7,000 rpm Tool flight circle 93 - 200 mm Tool flight circle for straight cutterheads max. 180 mm Maximum moulding depth 35 mm Axial adjustment travel 40 mm Split pressure shoe in front of upper spindle with horizontal adjustment plane, Adjustable to tool flight circle and swivelling away from the tool, pneumatic Pressure shoe before and after the upper spindle with electronic digital displays digital displays, integrated in the memory function or the PowerCom Radial CNC-controlled adjustment and positioning of the tool holders in conjunction with the memory function or PowerCom 5. spindle ----- Second upper horizontal spindle Motor 7.5 KW Diameter 40 mm Speed 7,000 rpm Tool flight circle 93 - 200 mm Tool flight circle for straight cutterheads max. 180 mm Maximum moulding depth 35 mm Axial adjustment travel 40 mm ...

Condition: used, Number of spindles 6 St. Working width 240 mm Working height 200 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-36 m/min. SCM Superset PLUS Comp. 31 also for window production ----- Technical data: ----- Working width: max. 240 mm Working height: max. 200 mm Feed: 6 to 36 m/min 1. Spindle ----- First lower spindle horizontal Motor with brake 11 KW Diameter: 40 mm Speed: 6,000 rpm 2. Tool holder HSK Ijlevnv Uzjhccqtstg ----- First right tool holder vertical Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning 3. Tool holder HSK ----- First left tool holder, vertical Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic adjustment of the tool diameter (setup) 4th spindle ----- First upper spindle, horizontal Motor with brake 11 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic adjustment of the tool diameter (setup) 5th spindle ----- Second upper spindle, horizontal Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic adjustment of the tool diameter (setup) 6th spindle ----- Second lower spindle, horizontal Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic Positioning Other technical features: ----- 2 feed units after the upper spindles for shortening the axis distance from 620 mm to 450 mm Air cushion lubrication in the work table Flange feed rollers before and after the left vertical spindle with electronic (CNC) telescopic adjustment 2 x milling unit with belt drive with quick-change system HSK 85 in position 2 – 3 Working height 200 mm instead of 120 mm 5 x electronic horizontal positioning position (2 – 3 – 4 – 5 – 6) + (31.14.05 tandem feed after position 2) 4 x electronic vertical positioning position (2 – 3 – 5 – 6) 3 x electronic setting of the tool diameter (setup) position (3 – 4 –5) Mobile control 10 PRL equipment for removing the glass strip on the 2nd upper horizontal spindle Machine without processing tools (technical data according to the manufacturer - no guarantee!)

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Weinig PowerCom Weinig Powermat 500 for window production Machine is reconditioned and functionally checked ----- Short summary: ----- 6 Spindles with 8,000 rpm and 7.5 KW 5 x HSK/Powerlock Window package with glazing bead separation Spindles axially and radially CNC controlled right and upper spindles with common pneumatic timing for Glazing bead cutting Large control Powercom with touchscreen Detailed description: ----- Tool arrangement No. 018 for window production Technical specifications: ----- Working width 20 - 230 mm (at tool cutting circle 93 - 125 mm) Working height 8 - 120 mm (at tool cutting circle 93 - 125 mm) 1. Tool holder ----- First lower tool holder Motor with brake 7.5 KW Diameter: 40mm Speed 8,000 rpm including high-performance ball bearings Itslevf Raaehccqtjg Tool flight circle 125 - 180 mm In connection with PowerLock 93 - 180 mm Axial adjustment range 17 mm Hardened table insert in front of the 1st lower tool holder 2. POWERLOCK/HSK tool holder ----- First right tool holder Motor with brake 7.5 KW Speed 8,000 rpm including high-performance ball bearings Tool flight circle 93 - 200 mm Maximum throat depth 35 mm Axial adjustment range for spindle 80 mm Axial adjustment range for PowerLock 55 mm Adjustment path radial Min. tool diameter at stop level 93 mm Max. tool diameter behind stop level 200 mm Axially and radially CNC controlled 3. POWERLOCK/HSK tool holder ----- First left tool holder Motor with brake 7.5 KW Speed 8,000 rpm including high-performance ball bearings Tool flight circle 93 - 200 mm Tool cutting circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Axial adjustment range for spindle 80 mm Axial adjustment range for PowerLock 55 mm Pressure shoe in front of the left tool holder, including 2 lateral pressure rollers, spring-loaded Axially and radially CNC controlled 4. POWERLOCK/HSK tool holder ----- First upper tool holder Motor with brake 7.5 KW Speed 8,000 rpm including high-performance ball bearings Tool flight circle 93 - 200 mm Tool cutting circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Adjustment path axial 40 mm Axially and radially CNC controlled 5. POWERLOCK/HSK tool holder ----- Second upper tool holder Motor with brake 7.5 KW Speed 8,000 rpm including high-performance ball bearings Tool flight circle 93 - 200 mm Tool cutting circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Adjustment path axial 40 mm Axially and radially CNC controlled 6. POWERLOCK/HSK tool holder ----- Second lower tool holder Motor with brake 7.5 KW Speed 8,000 rpm including high-performance ball bearings Tool flight circle 93 - 225 mm Maximum throat depth 15 mm Adjustment path axial 40 mm Adjustment path radial Min. tool diameter to table level 93 mm Max. tool diameter 6 mm under table level 22...

Condition: used, Year of construction: 2021, Number of spindles 5 St. Working width 250 mm Working height 160 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. control K2 Basic 7"-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm, spindle 4.5 to 8,000 rpm - Width and height motor-controlled: left spindle radial Iolhewgwmneccqtotg upper spindle axial - Feed carrier motor-controlled - Additional motor-controlled positioning: right spindle radial and axial left spindle axial - working width 250 mm TECHNICAL DATA ----- Working width (perimeter of tools 163 mm) 15 - 230 mm Working height(perimeter of tools 163 mm) 10 - 150 mm (perimeter of tools 123 mm) 10 - 160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm The processing of the work pieces is depending on the following operating parameters: material, wood moisture, tools, diameter of the chip removal and feed speed. If necessary adjustments to the operating parameter have to be done. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 250 mm Usabale length for tools Spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 125 - 160 mm Reference cutter Diameter difference 20 - 25mm to the cutterhead Connecting piece D = 125 mm Quick action lock nut Pro-Lock 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Adjustable table plate to tool radius Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Standard profile depth 20 mm Adjustable table plate to tool radius Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Pressure shoe pneumatically, via linear guides dynamically adjustable Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle lenght minus approx. 6 mm Drive, frequency-controlled...