8
3 days left
4 roll sheet round bending machine Akyapak Akbend AHS25/08, year 2010, S/N: SY230-071, working width: max. 2.500 mm, max. sheet thickness: 8 mm
C0pbynx
Older four-roll round bending machine make unknown
Technical data:
Working length 1000 mm
roll diameter 100 mm
max. sheet thickness approx. 3-4 mm
outer dimensions L x W x H 2550 x 1250 x 1250 mm
with
- swing out upper roll
Dx0vvy
used, ready for operation
Sheet rollers STROJARNE PIESOK XZC 3000/25 built in 1980 in Czechoslovakia.
Technical specifications :
- sheet width: 3000 mm
Bfw702njjm
- sheet thickness: 25 mm
- winding speed: 7.5 m / min
- upper and lower roll diameter: 430 mm
- side rollers diameter: 340 mm
- minimum rolled up: 600
- rolling machine weight: 36000 kg
This machine was used for a very few times.
Condition of this machine is the brand new ones.
We build a special hydraulic support for supporting the metal sheet in order to roll a big diameters or thin materials.
The machine has induction hardened rolls for rolling materials as stainless steel.
The four roll could be even 50-80% faster and more productive than any style three roll.
ROLL BY WIRE - very special and unique system for rolling. It means to run the entire
system through digital ...
- bending capacity: 4 mm
- roll diameter: 550 mm
- tapered bending ongoing: 1,8 mm
- tapered bending in pressing: 3 mm
Bhq2ontdnc
- usable length: 1500 mm
- upper roller diameter: 110 mm
- below roller diameter: 110 mm
- side roller diameter: 130 mm
- two driven rollers by direct linked hydraulic motor
- turning speed: 5 m/min
- voltage: 400 V, 50 Hz, 3 Ph
Nominal power: 3000x22/18 mm
Btwgdyv
top roller: 370 mm
bottom roller: 340 mm
side rollers: 270 mm
Drive power: 25 HP
Power supply: 400 V/50 Hz
Including hardened rolls, cone bending package, oil cooler, Easy Roll CNC control
Price on request.
Machine is delivered with commissioning and training in German.
We are DAVI trade and service partner for North, West and East Germany.
Three roll bending machine make STÖLTING Type EV 4
Year of construction 1983 with 6 exchangeable top rollers!
Technical data:
bending length 1050 mm
max. bending strength with strongest roll 4.0 mm
Drive power 4,0 kW
Okrat
external dimensions approx. 1500 x 700 x 1300 mm
Weight approx. 650 kg
with
- 6 exchangeable top rollers
60, 65, 90, 95, 100 and 110 mm
- 2 bottom rollers
- Hinged bearings
- Emergency stop
- R+L run
used, in good condition
Roll diameter: 760mm, bending diameter: 760-5000mm, workpiece length: 4200mm, workpiece thickness: 15-100mm, including 1 roll 760mm, 1 roll 680mm, machine was retrofitted in 2013.
Bbg9thtl7n
shaft diameter 45 mm
Roll diameter 162 mm
Delivery time prompt, subject to prior sale
Bending capacities:
Bending capacity (cross-section / min. diameter):
flat iron upright: 60x10 mm / 600 mm; 20x10 mm / 300 mm
Flat iron lying: 80x15 mm / 600 mm; 50x20 mm / 450 mm
Quad wheel steel: 35x35 mm / 600 mm; 15x15 mm / 300 mm
Round steel: Ø. 35 mm / 600 mm; Ø 20 mm / 300 mm
tube: Ø 60x2 mm / 1,000 mm; Ø 30x2 / 450 mm
shaped tube upright: 60x30x3 mm
Square shaped tube: 45x45x3 mm
Angle iron outer leg: 5...
4 Roll bending machine, max. 1.75 mm sheet thickness, length 1520 mm.
The bending machine is currently still in operation and fully functional.
Due to reasons of age the company will be closed down. All sheet metal working machines are for sale and can be inspected.
F82pubppk
There is a good loading possibility.
Technical data:
-Manufacturer: Binmak
-Type 3-LBS 1250x140
-Country of origin: Turkey
-Year of manufacture: 2020
-Working area approx. 1250x5,5mm
-Round rolls up to 5,5mm possible.
Cqqdeovd8
-the rollers are hardened
-with electric hiner roller
-with digital display
-for conical rolling
-with foot pedal
-electric approx. 2,2 kw
-own weight approx. 1220Kg
-roller diameter: approx. 140mm
-machine with cast iron housing
-sideways swivelling upper roller
-main motor with braking device
-Separate fro...
3-roll round bending machine Ostas ORM 1270 x 140
Technical specifications:
Special equipment included in the price:
Bj0kpdx2jz
motorized lower roll adjustment
hardened rolls
motorized rear roller adjustment
digital display
sheet width 1270 mm
sheet thickness 5,0 mm max.
sheet thickness 4,0 mm bending
roll length 1270 mm
roll diameter 140 mm
weight 1400 kg
dimension L-W-H 2500 x 800 x 1100 mm
Motor: 2.2 KW
Equipment:
upper and lower roller electrically driven
upper roller can be swung out
conica...
Three-roll bending machine with hydraulic top roller adjustment and quota display in excellent condition
Btraog92fq
Roll bending machine with spindle infeed.
and 3 driven rollers
Features:
Shaft diameter: 40 mm
Working position: horizontal/vertical with support
Connection: 230V/1 phase with inverter
dimensions (W x H x D): 700 x 1460 x 600 mm
Weight: 180 kg
Power:
round tube : 70 x 1,5 mm
Square tube : 50 x 50 x 3 mm
Round bar : 35 mm
flat iron : 50 x 10 mm
Angle iron : 50 x 50 x 6 mm
Scope of delivery:
CE40M3D
Universal roll set for profiles
Accessories (e.g. control panel with foot control, operating instru...
shaft diameter 90 mm
Roll diameter 260 mm
Delivery time approx. 6-8 weeks from order placement
shaft diameter: 90 mm
Roll diameter: 260 mm
Driven rollers: 3
Motor power: 5,5 kW
Speed: 6.37 m/min.
Bending capacities (cross-section / min. diameter):
Vsmaqe
flat bars upright: 100x20 mm / 2000 mm; 80x20 mm / 800 mm; 30x10 mm / 300 mm
Flat iron lying: 125x25 mm / 600 mm; 60x5 mm / 300 mm
Quad wheel steel: 45x45 mm / 500 mm; 15x15 mm / 380 mm
Round steel: Ø 50 mm / 500 mm; Ø 15 mm / 380 mm
Tube: Ø 100...
Offered from a bankruptcy is a ready to use 3-roller bending machine
Manufacturer Fasti
Model 104-10-2.5
Built in 1991
Masch.Nr. 9114046
Technical data:
Performance 1020 x 2, 5m
Motor brake
Before return by foot switch
man. Delivery of the rollers
Bef9cwpu3h
Top roller swivel
Roll diameter: 90mm
Emergency-off per rope
380 volts
Weight approx. 400kg
motorized three-roll bending machine - sheet metal round bending machine
Offer number: 20017
Make: SCHÄFER
Type: SRMVS 2500x18 ( VIII 44 )
machine no.: 3366
Year of construction: 1969
Technical data:
- Three roller drive
- bottom rolling with mot infeed for bending + conical bending
- hydr. hinged bearing for removing the sheet
- max. working width approx. 2550 mm
- max. passage approx. 2650 mm
- max. plate thickness for pipe diameter 385 mm 18 mm
- max. plate thickness with bend 13 mm
- T...
Pipe bender with 3 rolls with manual adjustment of the vertical roll in excellent condition
Gb0gqxpve
Shaft diameter 45 mm
Roller diameter 162 mm
Delivery time prompt, subject to prior sale
special price € 7.560,- (instead of € 9.400,-)
or leasing rate from € 143,64 *
Bending capacities:
Bending capacity (cross section / min. diameter):
Flat bars upright: 60x10 mm / 600 mm; 20x10 mm / 300 mm
Bqwhal2
Flat bars horizontal: 80x15 mm / 600 mm; 50x20 mm / 450 mm
Square steel: 35x35 mm / 600 mm; 15x15 mm / 300 mm
Round steel: Ø. 35 mm / 600 mm; Ø 20 mm / 300 mm
Tube: Ø 60x2 mm / 1,000 mm; Ø 30x2 ...
Manual three roll round bending machine make FASTI type 103-20-1.5
Machine # 9113030 Year of construction 1991
Technical data:
working length 2040 mm
max. sheet thickness 1,5 mm
roll diameter 100 mm
weight approx. 740 kg
outer dimensions approx. 2500 x 980 x 1400 mm
with
Nmrft
- swing-out upper roll
- lower and rear roller adjustment with hand wheel
little used, in very good condition
Technical data:
Pqfkqzx2
- max. working width 3030 mm
- Max. plate thickness 2 mm
- roller diameter 140 / 160 mm
- stroke of the rear roller 120 mm
- Working speed 4 m/min
- Drive - brake motor 400 V / 3.0 kW
- Space requirement approx. W 1750 x D 800 x H 1100 mm
- Weight approx. 2.9 t
- with - asymmetrical roller arrangement,
- Annex
- Back roller tiltable,
- Hinged bearing for swinging out the top roller
- Right + left rotation
- separate control panel
shaft diameter 110 mm
Roll diameter 320 mm
Delivery time approx. 6-8 weeks from order placement
shaft diameter: 110 mm
Roll diameter: 320 mm
Driven rollers: 3
Motor power: 7,5 kW
Speed: 4.98 m/min.
Bending capacities (cross-section / min. diameter):
flat bars upright: 100x20 mm / 800 mm; 30x10 mm / 400 mm
Flat bar lying: 200x30 mm / 1,200 mm; 160x35 mm / 800 mm; 80x5 mm / 400 mm
Quad wheel steel: 60x60 mm / 750 mm; 15x15 mm / 400 mm
Round steel: Ø 75 mm / 800 mm; Ø 15 mm / 450 mm
Tube: Ø 125x2.5...
shaft diameter 70 mm
Roll diameter 200 mm
Delivery time approx. 6-8 weeks from order placement
shaft diameter: 80 mm
Roll diameter: 200 mm
Driven rollers: 2
Motor power: 3 kW
Speed: 8 m/min.
Bending capacities (cross-section / min. diameter):
Bdsjtanlqa
flat bars upright: 60x10 mm / 500 mm; 20x5 mm / 250 mm
Flat bar lying: 80x20 mm / 500 mm; 50x5 mm / 250 mm
Quad wheel steel: 32x32 mm / 400 mm; 12x12 mm / 250 mm
Round steel: Ø 35 mm / 350 mm; Ø 10 mm / 250 mm
tube: Ø 60x2 mm / 600 mm; Ø 15x1.5 m...
sheet width 3100 mm
plate thickness 13,0 mm
pre-bending 10,0 mm
diameter of upper rolls 300 mm
side roll diameter 210 mm
diameter of lower rolls 270 mm
D90hykems
total power requirement 11,0 kW
Furnishing:
- hydraulic 4 roll bending machine
- Conical bending device
- Induction hardened rollers
- Digital display for the two side rollers
- mobile control panel
- 2 speeds
- hydraulic folding bearing
- CE mark / declaration of conformity
- Required instructions
sheet width 1500 mm
plate thickness 4 mm
2stafi
pre-bending 3 mm
number of rolls 4 Walzen
diameter of upper rolls 150 mm
roll diam. bottom roll 130 mm
speed 6 m/min
total power requirement 3,3 kW
weight of the machine ca. 2,47 t
dimensions of the machine ca. 3350 x 1200 x 1210 m
Basic equipment:
- Conical bending device
- Swiveling top roller
- Electrically adjustable rear roller
- Conical bending device
- driven top roller
- Pre-bending device
- brake motor
- Safety device emergency leash
- ...
Very little used ! Excellent condition.
ONLY 57 h working hours !
O7owp
New price 75.000,00 Euro
sheet width 600 mm
plate thickness 5 mm
pre-bending 4 mm
Roll diameter with mounted rings:
Upper- and lower roll diameter 192 mm
Side roll diameter 152 mm
total power requirement 7,35 kW
weight of the machine approx. 2,5 to
Control DAVI Smart Basic
Hydraulic drop end
With mounted rings on the rolls (for better grip, also ideal for edged sheet metals).
sheet width:3000 mm
plate thickness:8 mm
weight of the machine ca.:5,5 t
dimensions of the machine ca.:4,5 x 1,2 x 1,4 m
Bkquzzrzkw
Hydr. 4 roll DAVI Plate bender
Top / Lower roll Ø : 220 mm / 200
pre bending
Hydraulic Drop end
Conical bending
last software update in 2018
sheet width:3100 mm
plate thickness:10 mm
pre-bending:6/8
Pu2dky
diameter of lower rolls:260 mm
upper roll diameter:285 mm
side roll diameter:200 mm
total power requirement:9 kW
weight of the machine ca.:8 t
dimensions of the machine ca.:5,2 x 1,4 x 1,3 m
4 roll hydraulic plate bending machine with pre-bending device and digital readout.
sheet width: 3000 mm
plate thickness: mm
pre-bending: 16
Fh8lugt
bending capacity max. - round: 22,6 mm
feed:: m/min
distance between columns: mm
roll dia. top roll: Ø 300 mm
roll dia. bottom roll: Ø 300 mm
feed speed: m/min.
working pressure: bar
Total power requirement: kW
weight of the machine ca.: ca. 17,0 t
dimension machine xH: 6,3 x 2,0 x 2,2 m
sheet width 1550 mm
plate thickness 6,5 mm
pre-bending 4,5 mm
diameter of upper rolls 150 mm
side roll diameter 130 mm
diameter of lower rolls 150 mm
total power requirement 2,2 + 1,5 kW
weight of the machine ca. 2.370 kg.
range L-W-H 3.300 x 1.200 x 1.300 mm
Furnishing:
- hydraulic 4-roll bending machine
- separate control panel
- hardened rolls SAE 1050 CK 45
- Conical bending device
- 3 digital displays for exact roller positions
B2mkdbpi
- hydraulic folding storage
sheet width 1500 mm
plate thickness 7 mm
pre-bending 5 mm
number of rolls 4 Walzen
diameter of upper rolls 180 mm
roll diam. bottom roll 150 mm
speed 5 m/min
total power requirement 5,5 kW
weight of the machine ca. 3,0 t
dimensions of the machine ca. 3,4 x 1,29 x 1,4 m
Basic equipment:
- Conical bending device
- Swiveling top roller
- Electrically adjustable rear roller
- Conical bending device
- driven top roller
- Pre-bending device
- brake motor
- Safety device emergency leash
- CE certifi...
Suitable for rounding iron sheet up to 450 N / mm² tensile strength,
Clsfven
at a yield strength of 240 N / mm².
Sheet width 400 mm
Sheet thickness when bending 25 mm
Sheet thickness when rounding 30 mm
Upper roll diameter 135 mm
Side roll diameter 100 mm
Bottom roll diameter 135 mm
Main motor 18,38 kW
Drive speed 4 m / min.
Ejection device
Display device for the correction of the target diameter
Weight of the machine approx. 6500 kg
Ring bending machine, profile bending machine, three-roll bending machine, bending machine
-Spare roles
-Outer: Ø 200 mm
-for: 35 mm pipe
-Bore: 49 mm
-Number: 4 rolls available
-Price: complete
-Weight: 44 kg
Cjuyvfy0a
sheet width 1500 mm
plate thickness 5 mm
diameter of upper rolls 175 mm
Bkcychqg8
diameter of lower rolls 160 mm
sheet width 2030 mm
plate thickness 1,5 mm
pre-bending ja
roll diameter 95/88 mm
Ltc2mjjf
switchgear cabinet 850 x 600 x 1500 mm
total power requirement 1,5 kW
weight of the machine ca. 1,9 t
dimensions of the machine ca. 3,2 x 1 x 1,3 m
CE signed
Function: ready for operation
Electric 380 Volt
Emergency wire switch
Mot. 4-roller bender with two-roller drive (top / bottom), Sergi
Screen control in rollable control panel selectable in manual +
semi-automatic. On the screen will be the...
sheet width 2600 mm
plate thickness 10,0 mm
pre-bending 8,0 mm
diameter of upper rolls 230 mm
side roll diameter 190 mm
diameter of lower rolls 210 mm
total power requirement 7,5 kW
weight of the machine ca. 5.560 kg.
range L-W-H 4.650x1.380x1.300 mm
Furnishing:
- hydraulic 4 roll bending machine
- Conical bending device
Kxkx3l3b
- Induction hardened rollers
- Digital display for the two side rollers
- mobile control panel
- 2 speeds
- hydraulic folding bearing
- Operating instructions in Ger...
sheet width 2500 mm
plate thickness 16 mm
pre-bending 12 mn
number of rolls 4 Walzen
diameter of upper rolls 320 mm
roll diam. bottom roll 240 mm
speed 1,5 - 5 m/min
total power requirement 20,0 kW
weight of the machine ca. 12,05 t
dimensions of the machine ca. 5,45 x 1,85 x 2,05 m
Basic equipment:
Eh22dtto8
- Conical bending device
- Swiveling top roller
- Electrically adjustable rear roller
- Conical bending device
- driven top roller
- Pre-bending device
- brake motor
- Safety device emerg...
sheet width 2100 mm
plate thickness 20 mm
pre-bending .
diameter of upper rolls 300 mm
diameter of lower rolls 400 mm
total power requirement kW
2r0sqy
weight of the machine ca. t
dimensions of the machine ca. m
sheet width 2070 mm
plate thickness 4 mm
distance between columns 2100 mm
diameter of upper rolls 140 mm
Wttb0ec9
total power requirement KW
weight of the machine ca. 0,37 t
dimensions of the machine ca. mm
Hydraulic 4-roll round bending machines
Working length 2.100 mm
sheet thickness (max.) 6 mm
max. sheet thickness for bending 4 mm
solid machine frame, based on most modern construction and long-time experience
hydraulic hinged bearings for easy removal of the workpiece
roller infeed and adjustment of parallelism and taper is done via the control panel
all rollers are hardened and precisely mounted
upper and lower rolls are hydraulically driven
hydraulic components from Parker and Bosch
electrica...
BENDING LENGTH: 1050 mm
SHEET METAL THICKNESS: 5 mm
Bg9jgyllgq
UPPER ROLL DIAMETER: 130 mm
SIDE ROLLS DIAMETER: 110 mm
BENDING SPEED: 4,5 m/min
POWER: 3 kW
WEIGHT: 1560 Kg
OVERALL DIMENSIONS: 2250 x 1000 x 1500 mm
PRICE: On demand
sheet width 2600 mm
plate thickness 13,0 mm
pre-bending 10,0 mm
diameter of upper rolls 270 mm
side roll diameter 210 mm
diameter of lower rolls 250 mm
total power requirement 11,0 kW
weight of the machine ca. 7200 kg.
range L-W-H 5.022 x 1.520 x 1.438 mm
Furnishing:
- hydraulic 4 roll bending machine
Beoajz0mxk
- Conical bending device
- Induction hardened rollers
- Digital display for the two side rollers
- mobile control panel
- 2 speeds
- hydraulic folding bearing
- Required instructions
...
sheet width 2500 mm
plate thickness 25 mm
pre-bending 20 mn
number of rolls 4 Walzen
diameter of upper rolls 380 mm
roll diam. bottom roll 300 mm
speed 1,5 - 5 m/min
total power requirement 31,5 kW
weight of the machine ca. 17,6 t
dimensions of the machine ca. 5,45 x 2,3 x 2,45 m
Basic equipment:
- Conical bending device
- Swiveling top roller
- Electrically adjustable rear roller
- Conical bending device
- driven top roller
- Pre-bending device
- brake motor
- Safety device emergency leash
-...
SN WO 092-N010/1507
working width 2000 mm
sheet thickness 5 mm
Ba0fx0sh8f
automatical in-/output
Control unit - with NC control Conical bending device Side roll positioning electronically synchronized via PLC Safety mechanism for welding (welding possibility) on the machine Machine body made of stress-relieved annealed steel 4 roll drive system - upper, and lower roller with hydraulic motor driven synchronized via planetary gear (ᐳ 430 mm) Electrical and hydraulic protection against overloads Hydraulically adjustable lower roller pressure Hydraulic roller brake, prevents the sheet from slip...
