Used Pu for sale (1,446)

Condition: used, PPM Rotary Lobe Pump Model LH84L - 4981 PU Ratio - 2.9451 : 1 RPM - 500 Sanitary lobe pump Ledoz E Iawjpfx Akwsah Port size - 90mm flange

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, We are offering this ready-to-use HOMAG KR 79/02/PU/S2 edge banding machine, manufactured in 1993. Manufacturer: HOMAG Type/Model: KR 79/02/PU/S2 Year of manufacture: 1993 Lodpfszwunbjx Akweah If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 000247, GLUE MACHINE FOR SINGLE-COMPONENT POLYURETHANE ADHESIVE. SPECIAL FOR GLUING LAMELLAS OF LAMINATED BEAMS • Maximum gluing width: 300 mm • Gluing head divided into 3 combs, each 100 mm and controlled by solenoid valve • Glue cord pitch: 10 mm • Tray with non-stick liquid that automatically closes the combs when the machine does not dose • Glue dosage: 100 to 200 gr/m2, as determined • Gear metering pump • Glue viscosity range: 10.000 to 30.000 mPas • Drag speed: 7 to 15 m/min • Support for 200 l barrel Ljdpfx Aot Nfarokwoah • PLC control, with touch screen. KINCO brand • Machine from the GLUESTREAM company • CE rules • Machine manufactured in 2021 and assembled in May 2022. Like new, it has worked less than 50 hours WE ALSO HAVE THE HYDRAULIC PRESS TO MAKE GLULAM BEAMS, ALMOST NEW MACHINE

Condition: excellent (used), functionality: fully functional, overall weight: 175 kg, volume flow: 80 m³/h, final pressure: 0.06 bar, input voltage: 400 V, rotational speed (max.): 1,500 rpm, Busch Mink MM 1144B V03 Vacuum Pump Ledpfx Aksz Hbqxswoah 2 pumps available with very little work done each. Pumps were purchased and installed for a project that was never commissioned. Selling on behalf of our customer.

Condition: excellent (used), functionality: fully functional, Holz Her Auriga 1308 XL FÜ + PU compact design - edge thickness 0.4 - 8 mm SPS-based Edge-Control PPC 231 touchscreen control system motor-driven, position-controlled bridge height adjustment pre-milling unit for attachment before the gluing section fully automatic edge magazine for roll and strip material GLU JET cartridge gluing station + PU gluing glue application via nozzle technology workpiece height 6-60 mm automatic glue height adjustment pressure unit 1912-3, pneumatic trimming unit 1918, pneumatic, for roll and strip material up to 8 mm edge thickness with pneumatic adjustment for 0-10° bevel of the trimming saw Laedpfxszib Nie Akwjh milling unit 1827 MOT 4, flush trimming 8 mm, radius milling - bevel milling - 15° MOT NC axes controlled via control panel profile milling unit 1832 pneumatic, rounding of corners up to edge thickness 3 mm in a single pass scraper blade unit 1929 MOT2 for bevels and radii with 2 scraper blade holders, NC axes controlled via control panel surface scraper blade unit - finishing buffing unit - polishing spraying system at the infeed and outfeed complete tool equipment included first delivery 2013 machine is FUNCTIONALLY TESTED and in TOP CONDITION available from warehouse Lieboch

Condition: used, Year of construction: 2005, functionality: fully functional, total width: 6,300 mm, total height: 2,100 mm, total length: 20,000 mm, working width: 2,600 mm, input voltage: 380 V, type of input current: three-phase, roll width: 2,600 mm, roller length: 7,600 mm, We offer this ready-to-use ICO SYSTEM reactive PUR hot melt press, model ICO SYSTEM, manufactured in 2005. ICO SYSTEM reactive PU hot melt press line – 2,600 × 7,000 mm For sale: complete industrial reactive PU hot melt press line for single-sided bonding of large sheet materials. This robust production line from ICO SYSTEM International Coating GmbH has been successfully used for years by TABB Interior Systems BV for the production of high-quality laminated sheet materials. The installation is in excellent technical condition, is fully operational, and can be put into production immediately. Key features: Reactive PUR hot melt bonding Maximum panel size: 2,600 × 7,000 mm Suitable for single-sided bonding Year of manufacture: approx. 2005 Fully functional and well-maintained PLC control with touchscreen Automatic vacuum portal for precise panel positioning Throughfeed system for controlled curing and constant pressing force Roller conveyors and transport tables included Suitable for: The installation is suitable for bonding a variety of flat sheet materials, including: plywood MDF HDF particleboard HPL composite panels aluminum and steel sheets various other industrial sheet materials. Production process Laedpfszlh Auox Akwjh The line is designed for an efficient and reproducible production process: positioning of the bottom sheet application of reactive PUR hot melt automatic placement of the top sheet using a vacuum portal passage through the heated press controlled curing and output of the finished product. Thanks to the automatic handling, large panels are produced quickly, accurately, and with consistent adhesive quality. Scope of supply The complete installation includes, among other things: ICO SYSTEM heated throughfeed system automatic vacuum portal with suction cups conveyor belts and roller conveyors control cabinet with PLC/HMI complete steel structure and handling. Condition The machine is fully operational, is still in use in production, and is available only due to a change in the production process. Inspection while running is possible by appointment. Interested? Please contact us for additional information, technical specifications, a demonstration, or an inspection. This high-quality industrial press line is ideally suited for companies that want to efficiently bond large sheet materials with a high-quality PUR hot melt bond.

Condition: used, Year of construction: 2011, For inquiries regarding attachments, Mr. Herden will be happy to assist you (tel. ). Pronar PU-1700 Snow Plow / 2011 / up to 1,930 mm working width Price: €1,990.00 net / €2,368.10 gross - Clearing width depending on operating setting: 1,680 mm / 1,930 mm - Operating settings: 4 - Scraper bars: Deflectable, made of rubber - Scraper bar shock absorption: on springs - Hydraulic control: 16-20 MPa - Power supply for boundary lights: 12 V - Working speed: 10 km/h - Power requirement: 25-55 hp - Own weight: 355 kg In our warehouse, we have a very large selection of various attachments that are immediately available! Mr. Herden (tel. ) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are the official Westtech sales and service partner. We are the official OilQuick sales and service partner. We are the official Holp sales and service partner. We are the official Magni telehandler sales and service partner. We are the official DMS sales and service partner. We are the official Gierking GMT sales and service partner. We are the official Weber MT sales and service partner. We are the official Seppi M. sales and service partner. We are the official JCB construction machinery sales and service partner. We are the official Mercedes-Benz sales and service partner. We are the official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! Internal No.: 1375 = Further information = Intended use: Agriculture Unladen weight: 355 kg Working width: 193 cm Lasdpfx Aoznrpkokwsh Please contact Marius Herden for further information.

Condition: used, machine/vehicle number: 008121, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: PUR Ljdpjw Idhtjfx Akwsah Corner Rounding Unit: yes Max Panel Width: 3000 mm Max feed speed: 32 m/min Operating Units Right Side: 10 nr Operating Units Left Side: 10 nr

Condition: used, Holz Her Sprint 1321, with edge banding and PU adhesive application Heavy-duty version – edge thickness 0.4 – 15 mm SPS-based Edgecontrol control panel Motorized, position-controlled bridge height adjustment Pre-milling unit for attachment before the gluing station Fully automatic edge magazine for roll and strip material Gluing unit with cartridge system + PU adhesive application Automatic glue height adjustment / touch probe nozzle Pressure unit 1913, pneumatic Trimming unit for roll and strip material 1918 – 15 mm With pneumatic adjustment for trimming saw angle from 0-10° Multi-function milling unit with motorized adjustment: flush trimming – 15 mm, radius and chamfer milling – 15° Profile milling unit – corner rounding 1833 Scraping unit for chamfers and radii 1929, pneumatic Pneumatic infeed and outfeed Lajdpfx Ajzp Hc Uskwoh Surface scraping unit – finishing, pneumatic Buffing unit for finishing and edge polishing with 2 textile discs HIGH-END spraying system Complete set of tooling Machine is in FULLY OPERATIONAL CONDITION Machine from a craft business / consignment sale Available from stock in Lieboch, NET € 21,500.00

Condition: good (used), Year of construction: 2013, 230mm Swing, 230mm Max Turned Diameter, 230mm maximum turning length, 12 + 12 Station Turrets, 65mm Bar Capacity, 5000rpm 15KW Main Spindle, Fanuc 31i Control, C Axis to both Spindles, 5000rpm Sub Spindle, +/-50mm Y axis, Ledpfx Aksz Sqcvswoah coolant, swarf conveyor, tool setter, parts catcher, Magazine Bar-feed.

Condition: like new (used), functionality: fully functional, Graham Vacuum Pump DF/SCH00058 Type: 2 067/180 20006 171 Lasdpfx Ajznpagskwoh ID no 12320594/1 Unused, ex stores stock. Unit was purchased as a spare, but never used.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: ZCFC50C100D515072, mileage: 104,120 km, power: 125 kW (169.95 HP), first registration: 09/2025, fuel type: diesel, empty load weight: 2,592 kg, overall weight: 5,200 kg, tire size: 195/75R16 107/105R, brakes: engine braking, color: grey, driver cabin: day cab, gearing type: mechanical, number of seats: 2, Year of construction: 2014, Equipment: ABS, airbag, trailer coupling, If you have any questions or would like to arrange a viewing, please feel free to contact us. We are offering for sale our Iveco Daily RCS 15 PU 150 NG Metras oil spill cleaning vehicle. For technical enquiries, you are welcome to contact us by phone. Standard equipment: 26801 Driver’s airbag 40000 Anti-lock braking system (ABS) 70303 Traction control system (ASR) 70406 Drive type: Rear-wheel drive 01213 Version: C-Series 40390 Brake assist 37711 Cargo area ceiling light 70308 Electronic stability program (ESP) 25408 Digital tachograph 42509 Rear axle suspension: parabolic 42515 Front axle suspension: torsion bar 35000 Electric windows 22608 Tinted windshield and side windows 74208 Alternator 120 A 26704 Speed limiter system 90 km/h 75205 6-speed gearbox 08403 Body/build: High roof van 27505 Cargo partition 18205 Headlight range adjustment 24406 Radio pre-installation with speakers Lajdpfxew A Nw Do Akwjh 48002 Wheelbase 3300 mm 67108 Tyres 195/75 R16C 107/105 P 18000 H4 headlights 69800 Power steering 33208 Cabin seats: double passenger seat with headrests 44002 Steel rims 5x16 18607 Daytime running lights 38105 Immobilizer 05409 Permissible gross weight 5.20 t Special equipment: 14202 Trailer coupling: fixed tow ball 14296 13-pin trailer socket 14295 Trailer socket pre-installation 15200 Exterior mirrors electrically adjustable and heated 37810 Overhead storage with additional DIN compartment 42905 Rear axle suspension: air 26708 Cruise control system 36505 Rear doors (opening angle 260 / 270 degrees) 29200 Cabin air filter: pollen filter 28901 Automatic climate control 77403 Fuel tank: 90 L 28709 Air conditioning compressor 170 ccm 92206 Engine 3.0 L – 125 kW diesel CAT 18617 Fog lights with static cornering light 77005 Diesel particulate filter 36205 Left sliding door to cargo/passenger area 36209 Sliding doors left and right to cargo/passenger area 20405 Mud flaps front and rear 33105 Cabin seats: single passenger seat, 2-way adjustable 32100 Cabin seats: comfort driver’s seat (hydraulic) 35301 Central locking with remote control Subject to typographical errors, mistakes, and prior sale. No safety-relevant defects are known on the vehicle. The vehicle has been inspected according to applicable regulations. All details in this offer have been carefully checked but are non-binding. Subject to change, error, and prior sale. Sale excludes any and all warranty. No accident damage is known or has been checked for.

Condition: used, Colour: Green Empty weight: 3.500 kg Price: On request - Transport weight [kg]: 3500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Lodpfxjz Ngv Hs Akwjah Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: LU21C0001, input voltage: 400 V, type of input current: AC, input frequency: 50 Hz, input current: 40 A, Brand new , never used Versa PUR Tank Melter for PUR glue application. This aggregate is stil in its original packing . The aggregate comes from close down of a factory here in Norway. Ready to be send . Ledoz Sqppspfx Akwoah Please contact me for more information.

Condition: used, The Herbold PU 500 pulverizer is suitable for fine grinding of plastics and soft to medium-hard materials. Drive power 55 kw Grinding disk diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness Laodpfez Hxc Eox Akwsh

Condition: used, Year of construction: 2020, This is a Product Pump with the Balance tank for viscous products ie. yoghurt, pastes, cream, etc. It is designed to transfer the product from A To B without overheating or beating the product. This is located on skid with an extra high speed volume pump for the CIP wash down of the system. Control panel is included in the line. Ledpfsz Izh Tex Akwsah Product Pump: For viscous Products CIP: Special CIP Pump on the skid Stainless steel: Yes Electricals: 3 phase / 400v /50-60hz Available: Immediately

Condition: used, Year of construction: 2011, Edge processing line HOMAG, consisting of: Lasdpfszvmx Aex Akwoh - Infeed system for longitudinal and transverse parts - One HOMAG edge banding machine with LASER GLUING - Transfer station for longitudinal and transverse output - Return conveyor for automatic circulation Pos. 1 Vacuum infeed system TBP 410 Max. workpiece size 2,800 x 1,200 x 40 mm Max. workpiece weight 50 kg Small parts down to min. 250 x 85 mm (longitudinal and transverse) Narrow parts 2,800 x 69 mm (longitudinal only) Servo-controlled lifting drive for max. 18 cycles/minute With servo-controlled rotary device -90/+180 degrees Pos. 2 Single-sided laser edge banding machine HOMAG KFL610/21/PU/L/25/SI14 For automatic 4-sided processing in 4 passes With SI 14 feeding system for automatic feeding of longitudinal and transverse parts Equipment: - Release agent application top and bottom - Trimming cutters 4.5 KW / Double-trimming cutter 2 x 6.6 KW - Stepless axis adjustment vertical and horizontal - Mortising unit 2 x 4 KW - LASERTAC activation unit 3 KW / optionally PU gluing - Max. edge thickness 3 mm - 24-position roller magazine with servo-controlled edge feeding - Release agent spray device top/bottom - Trimming unit bevel/straight HL 84 / 0.8 KW with 2 motors - Pre-milling unit with 2 motors, each 1.5 KW (pneumatically adjustable to 2 positions) - Release agent spray device top - Profile milling unit FK 23 with 2x8-position tool changer for 20 cycles/minute - Multi-scraper unit MN 21 automatic - Finishing unit FA 11 top/bottom (flat scraper and buffing unit) - Milling unit with 6.6 KW motor, pivotable 90 degrees, stepless axis adjustment vertical and horizontal. With HSK 63 F tool holder - Machine is designed for tool changes in the gap Pos. 3 Workpiece return with chain lifting buffer To decouple processing machines by temporarily buffering. Return via approx. 6 belt conveyors Pos. 4 Vacuum transfer device TBP 410 Max. workpiece weight 50 kg Small parts down to min. 250 x 85 mm (longitudinal and transverse) Narrow parts 2,800 x 69 mm (longitudinal only) Servo-controlled lifting drive for max. 18 cycles/minute With servo-controlled rotary device -90/+180 degrees

Condition: used, The Herbold PU 500 fine grinder is suitable for fine grinding of plastics and soft to medium-hard materials. Lasdpfjz Hxhuex Akweh Drive power 55 kw Grinding disk diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, load capacity: 4,000 kg, lifting height: 10,000 mm, battery voltage: 48 V, empty load weight: 9,000 kg, General information: The HUBTEX 2125-PU/SO with model MQ 40 is an electric multidirectional sideloader with a load capacity of 4 tons and a cross-seat cabin. This forklift is suitable for warehouse areas where maximum flexibility and maneuverability in narrow aisles are required to handle loads of up to 4000 kg. Lodpfxox Aqaqj Akweah M = Multidirectional steering Q = Cross-seat cabin 40 = 4,000kg 2125 = Series PU = Vulkollan tires SO = fork tilting and lowering, extendable forks to 1500mm, hydraulic fork width adjustment Additional equipment/modifications: - Camera system on the right and left of the forks, with monitor in the cabin - Positioning lasers on the right and left of the forks - Soft-stop feature when lowering the forks and when crossing the telescopic fork extension steps

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, power: 132 kW (179.47 HP), Price available upon request. Lajdpfjzc E Hyex Akweh The machine is in operational condition.

Condition: used, Holz Her STREAMER 1057 XL FÜ + PU Edge thickness 0.4 - 6 mm Modern control system with selector switch for adjusting the units Fully automatic edge magazine for roll and strip material GLU-JET adhesive application station, cartridges + PU adhesive Adhesive application using nozzle technology Sensor-controlled nozzle Workpiece height 6-60 mm Automatic adhesive height adjustment High-quality 3-roller pressure unit, 1st roller motorized Trimming unit, pneumatically controlled for roll and strip material up to 6 mm edge thickness With pneumatic adjustment of the trimming saw angle from 0-10° Routing unit, flush trimming 6 mm, radius routing - chamfer routing - 15° Corner copying unit - 3 mm edge thickness Scraping unit for chamfers and radii with 2 scraping blade holders Surface scraping unit - finishing Buffing unit Spray device in the infeed and outfeed area, as well as for PU Machine with all processing tools Machine is WORKSHOP TESTED From a craft business First delivery 2019 Available from stock in Lieboch Lajdpfezcau Eex Akweh

Condition: used, Year of construction: 2018, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Doosan Turning Center 2 Axes (X, Z) Model: Puma GT2100B Year: 2018 CNC: Fanuc CE Certification Chip Conveyor: Operational ✅ Laodpfxsz St Tqo Akwjh Documentation: Available ✅ Chuck: Operational ✅

Condition: good (used), machine/vehicle number: 15461, Year of construction: 2015, operating hours: 614 h, load capacity: 2,500 kg, lifting height: 3,800 mm, load center: 900 mm, fuel type: electric, mast type: duplex, enginetype: Electric, manufacturer: Dimos Laodszffu Uspfx Akwoh Serial Number: 1508029

Condition: used, Holz Her STREAMER 1057 FÜ + PU Edge thickness: 0.4 - 6 mm Modern control system with selector switch for aggregate adjustment Pre-milling unit for precise workpiece preparation before the gluing section Fully automatic edge magazine for coil and strip materials GLU-JET cartridge adhesive application station + PU gluing Adhesive application via nozzle technology Workpiece height: 6–60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1st roller motorized Pneumatic end trimming unit for coil and strip material up to 6 mm edge thickness Lodpfjyg H Hiox Akweah With pneumatic adjustment for 0–10° inclination of the end saws Milling unit for flush trimming up to 6 mm, radius milling and bevel milling up to 15° Corner rounding unit for edges up to 3 mm thickness Scraper unit for bevels and radii, equipped with 2 scraper holders Flat scraper unit for finishing Spraying device – PU Machine equipped with all processing tools Machine is WORKSHOP-TESTED and in TOP CONDITION Available from stock in Lieboch

Condition: used, HERBOLD PU800 pulverizers Laedpfjz Hxifex Akweh Suitable for soft to medium-hard materials Used so far for fine grinding of plastics Diameter of grinding disks: 800 mm Drive motor: 90 kw