Used 4 Side Moulder for sale (67,900)

Condition: used, Year of construction: 1999, Used 4-sided planing machine Manufacturer: WEINIG Type: Unimat 23 E Year of manufacture: 1999 with infeed unit EM11 Year of manufacture: 1999 Technical data: Gusdpfxezuzdqo Alcoi 5 spindles (bottom, right, left, top, bottom) Total connected load min. / max. 42 kW - 126 kW Air flow rate 30 - 32 m³ / MIN Air flow rate per spindle 28 - 32 m³ / MIN Total air flow rate 8400 - 9600 m³ / H Nominal pressure 8 bar Operating pressure 6 bar Connection diameter DN 8 Machine weight approx. 3200 kg Static load (with support plates 80 x 100 mm) max. 120 N / CM² Note: The technical data and descriptions are transcriptions from the original order confirmation. The data is for informational purposes only and is not binding.

Condition: new, Year of construction: 2021, Max. working width 260 mm Min. working width 25 mm Max. working height 180 mm Min. working height 8 mm Feed speed 4/30 m/min Spindle speed 6000 rpm Tool holder spindle diameter ø 40 mm Tool diameter 1st lower spindle ø 125 mm Min. tool diameter 4th spindle ø 110 – 125 – 140 mm Max. tool diameter 4th spindle ø 200 m Min./Max. tool diameters (except 1st and 4th spindle) ø 110 / 200 mm Diameter and thickness of the undercutter ø 145 – 12 mm Length of the worktable 2500 mm Axial adjustment of the vertical spindles under the worktable - 90 mm Power of the lower planer spindle motor 4 kW Godsv Dtwfopfx Alcsui Power of the right spindle motor 4 kW Power of the left spindle motor 4 kW Power of the upper spindle motor 5.5 kW Power of the second, lower spindle motor 4 kW Power of the feed motor 2.2 kW Feed up/down 0.37 kW Worktable made of HARDOX steel standard Pneumatic pressure of the drive units standard Poly - V belts drive all spindles, withstand the highest efficiency of the power of the motors standard Independent motor unit for each spindle standard Drive system powered by the Cardan system standard Chip removal system standard Manual lubrication of the work table standard Direct start of the motor with illuminated buttons from the control panel standard Overall dimensions (length x width x height) 4300 X 1600 X 1700 mm Weight 2000 kg

Condition: used, Year of construction: 2020, Sled length: 3200 mm Cutting width at the rip fence: 1250 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 120 mm Scoring saw: yes Guodpfxszq Dcuo Alcsi Saw blade height adjustment: handwheel Saw blade swivel adjustment: handwheel Rip fence adjustment: manual Crosscut fence adjustment: manual Saw blade angle indicator: scale Cutting height indicator: - Rip fence indicator: scale Crosscut fence indicator: scale Saw blade diameter: 400 mm Speeds: 3 Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2200 mm Weight: 800 kg

Condition: used, Year of construction: 2006, Overview The BLOMAX 4 blow molder was manufactured by the German company SIG Corpoplast (now KHS) in 2006. It has been overhauled by a machine builder and can be inspected in dry operation. Blow molds are not included, but can be obtained.  Technical details  - Output: up to 7,200 bph - 4 cavities - Dimensions: 4960 mm x 3900 mm x 3000 mm  - Weight: 15 t  - Operating hours: 44.736  - Bottles - Volume: 200 ml - 2000 ml   - Max. Diameter: 115 mm  - Max. Length: 350 mm - Preforms  - Length: 60 - 200 mm Gusdpfx Ael Hxpkelcoi - Max. Support ring diameter: 35 mm  Scope of delivery  Blow molder is completely equipped with the system for preform feeding (silo, elevator, sorting, chute)

Condition: used, Year of construction: 2009, Atlantic 4-brush Glass Washer. Serial no: 3239 (02/2009) Gsdpe Afw D Eofx Alcjui Location: This lot located in Wellingborough, Northamptonshire, UK

Condition: used, total length: 1,000 mm, total width: 2,040 mm, total height: 1,710 mm, Year of manufacture: 1999 Colour: Grey Empty weight: 900 kg - Year: 1999 - CE marking present: Yes - Serial number: 126-02049 - Main motor power [kW]: 7.8 - Spindle diameter [mm]: 40 - Table length [mm]: 1990 - Table width [mm]: 850 - Max. tool diameter milling head [mm]: 180 - Feeding device present: Yes - Brand: Holz-her - Type: ET117 - Number of wheels [pcs]: 3 - Number of speeds: 8 - Tools (milling heads) included: Yes - Spindle speed: Manual - Min. spindle speed [rpm]: 3000 - Max. spindle speed [rpm]: 10000 - Spindle speed control: Variable - Voltage [V]: 380 - Current consumption [A]: 12 - Fuse [A]: 16 - Power [kW]: 6.2 - Transport dimensions: 1000mm x 2040mm x 1710mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information Godpfx Ae Afy S Helceui VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Allen Bradley 2711P-RP6 Panelview Plus Logic Module Ser F / 2711P-B12C4D6 SN: 42857-4, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Gsdpjx Eqt Eofx Alcsui

Condition: good (used), mileage: 201,340 km, power: 75 kW (101.97 HP), first registration: 03/2022, fuel type: diesel, tire size: 195/65R15, axle configuration: 4x2, wheelbase: 2,800 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, total length: 4,400 mm, total width: 1,850 mm, total height: 1,880 mm, loading space length: 1,530 mm, loading space width: 1,380 mm, loading space height: 1,180 mm, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, = Additional Options and Accessories = - Heated mirrors - Halogen lamp - None - Manual - Radio/cassette - Rearview camera - Fabric - Blind spot sensor - Partition = Notes = Configuration: 4x2, Payload: 667 kg, Unladen weight: 1373 kg, Gross vehicle weight: 2040 kg, Trailer load, unbraked: 730 kg, Trailer load, center axle, braked: 1500 kg, Cab type: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: Front and rear, Electric windows, Electric mirrors, Partition, Radio/cassette, Carplay, GPS navigation, Color: White, Heated mirrors, Rearview camera, Lighting type: Halogen lamp, Bluetooth, Blind spot sensor, Engine power: 75 kW (101 hp), Number of cylinders: 4, Displacement: 1499 cc, Fuel: Diesel, Euro: 6, Drive technology: Timing belt, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: Standard, Side paneling, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Seats: 3, Seat arrangement: 1+2, Seat cover: Fabric, Seat adjustment: Manual, L1, air conditioning, navigation, side door, parking distance control, Tire type: Summer tires = Additional Information = General Information Number of doors: 1 License plate: VPK-57-F Gsdpfxs Agf T As Alcsui Axle Configuration Tire size: 195/65R15 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread left: 5 mm; Tire tread right: 5 mm Axle 2: Tire tread left: 4 mm; Tire tread right: 5 mm Weights Unladen weight: 1,373 kg Payload: 667 kg GVW: 2,040 kg Functional Loading area height: 60 cm Maintenance APK (Technical Inspection): valid until 01.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: 128 € per month (delivery van, 72 months); Ask for more information and conditions.

Condition: like new (used), functionality: fully functional, planing width: 430 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, total length of planing tables: 2,900 mm, Equipment: CE marking, SAC FS 430 PLANER | SCM jointer planer with electric table adjustment | 430 MM! 4 TERSA knives! Professional planer from the Italian brand SAC, model FS 430. The machine is designed for precise surfacing and edge planing of wooden components. Its robust, heavy-duty construction and wide 430 mm working table make it ideal for use in both woodworking shops and for the production of furniture, doors, windows, and solid wood elements. Electric table adjustment allows for quick and convenient machine setup changes without the need for manual table lifting. The controls are located on a separate, easy-to-read operator panel. TECHNICAL SPECIFICATIONS: - Manufacturer: SAC - Model: FS 430 - Type: Planer - Planing width: 430 mm - Shaft: 4-knife TERSA - Shaft diameter: approx. 120 mm - Table adjustment: electric - Adjustment control: from the control panel - Table length: 2900 mm - Fence: cast iron, adjustable angle - Shaft guard: YES - Noise reduction combs: YES - Power supply: 400 V Gsdpszx Alkjfx Alcoui Machine testing on-site is possible. Financing options are available through leasing or installment plans. WE ORGANIZE TRANSPORT We have the following machines available: band saws, circular saws, crosscut saws and miter saws, thickness planers, jointers, sanders, horizontal and vertical drilling machines, feed systems, sharpeners, four-sided planer, four-sided, three-sided, two-sided, thicknesser, jointer, sander, planer, jointer-planer, planer-thicknesser, jointer-thicknesser, thicknesser-jointer, cleaning machine, mortiser, drilling machine, parquet machine, trimming machine, lathe, milling machine, spindle molder, top spindle, bottom spindle, sanders, wide belt sander, throughfeed sander, roller sander, disc sander, angle sander, jointer, drill, drilling machines, horizontal, radial, milling machine, multi-spindle, edge banding machines, edge bander, veneer machine, press, presses, lathes, band saws, briquetting machines, briquetting machine, chippers, chipper, wood chipper, dowel machine, dowel machines, mortiser, mortising machine, dust extraction, dust collectors, exhaust fan, fans, sharpener, sharpeners, compressor, compressors, honing machines, multi-function

Condition: good (used), Year of construction: 2016, color: white, overall weight: 16,000 kg, loading space width: 2,480 mm, loading space length: 7,320 mm, loading space height: 2,520 mm, Kögel ENCO 74 Interchangeable Platform Trailer Permissible total weight: 16,000 kg Unladen weight: 2,299 kg Gusdpszkupxsfx Alcji Curtainsider Edscha sliding tarpaulin Portal doors Adjustable support legs Height when lowered: 1.32 m Load compartment dimensions: L 7.32 m, W 2.48 m, H 2.52 m

Condition: as good as new (ex-display), Year of construction: 2016, For sale: machine for packaging paneling. Gjdpfxjzkwi Uj Alceui

Condition: excellent (used), Year of construction: 2011, 1. Weishaupt gas burner WM-G10 / 4-A. With Dungs gas piping DN 50. Design: ZM Gusdpfx Aezaa Uaolcoi Year of manufacture: 2011 Output: 110 - 1250 kW. Connection pressure: 15-500 mbar. 2. Weishaupt gas burner WM-G10 / 4-A. With Dungs gas piping DN 50. Design: ZM Year of manufacture: 2005 Output: 120 - 1250 kW. Connection pressure: 15-500 mbar.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, power: 3.2 kW (4.35 HP), input voltage: 380 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 100 mm, table width: 450 mm, table length: 600 mm, throat depth: 200 mm, ram plate width: 400 mm, ram plate length: 260 mm, clearance between the columns: 260 mm, overall weight: 2,600 kg, Equipment: CE marking, safety light barrier, 2000 Presse Ross 40V-4 40 ton mechanical press with Brankamp Prokos PK550/3 monitoring, OBRU powered decoiler and safety guarding. Manufacturer: Presse Ross Model: 40V-4 Machine Type: Mechanical Press Year: 2000 Condition: Very Good Includes: Brankamp Prokos PK550/3 Process Monitoring Control OBRU Powered Decoiler Interlocked safety guards Separate control panel with two hand control Machine Description Used 2001 Presse Ross Type 40V-4 40 tonne mechanical eccentric power press, complete with Brankamp Prokos PK550/3 process monitoring control, OBRU powered decoiler, interlocked perimeter safety guarding and separate control panel with two-hand operation. This Italian-built Presse Ross 40V-4 mechanical stamping press has a nominal pressing capacity of 400 kN / 40 tonnes, an adjustable 7–100 mm ram stroke and variable operating speed of approximately 68–203 strokes per minute. The included Brankamp Prokos PK550/3 process monitoring system is designed for monitoring press-production parameters and identifying abnormal process conditions. Brankamp/Prokos systems of this type monitor manufacturing process signals such as pressing/forming forces and can be used to identify deviations during production. Technical Specification Manufacturer: Presse Ross Model / Type: 40V-4 Year: 2001 Serial Number: 02-0297 Press Type: Mechanical eccentric / flywheel press Nominal Press Force: 400 kN / approx. 40 tonnes Ram / Slide Guides: 4 Adjustable Stroke: 7–100 mm Ram / Slide Adjustment: 60 mm Maximum Shut / Closed Die Height: 275 mm Variable Stroke Rate: Approx. 68–203 strokes/min Nominal Speed: 150 strokes/min Throat Depth: Approx. 200 mm Frame Opening / Passage: Approx. 260 mm Table Size: 600 × 450 mm Table Thickness: Approx. 55 mm Table Opening: Approx. 120 mm Ram / Slide Surface: 400 × 260 mm Tool Shank / Ram Bore: 50 mm Motor Power: 3.2 kW Motor Speed: 2,000 rpm Electrical Supply: 380 V / 50 Hz Maximum Flywheel Speed: Approx. 203 rpm Compressed Air Supply: Approx. 0.5–0.7 MPa Machine Weight: Approx. 2,600 kg Included Equipment Brankamp Prokos PK550/3 Process Monitoring Control Process monitoring equipment for monitoring press operation and production parameters, useful for detecting process deviations and helping protect tooling and production quality. OBRU SAH 1M Powered Decoiler The machine is supplied with an OBRU SAH 1M powered / motorised decoiler, suitable for unwinding coil strip for feeding into the press. Safety Equipment Interlocked safety guarding Separate operator control panel Two-hand press control Guard interlocking Emergency-stop controls Machine Highlights 40 tonne / 400 kN capacity Variable-speed mechanical press 7–100 mm adjustable stroke Up to approximately 203 strokes/min Gedpfxez It Dms Alcoui 600 × 450 mm bolster/table Brankamp Prokos PK550/3 process monitoring OBRU powered decoiler included Interlocked safety guarding Separate two-hand control station Italian-manufactured Presse Ross press Condition Used machine. Please contact us for further information, photographs, availability, inspection arrangements and pricing. Please Note: All specifications, dimensions, capacities and descriptions are approximate and provided in good faith. Prospective purchasers should independently verify all important specifications and machine suitability before purchase.

Condition: good (used), Year of construction: 2014, operating hours: 4,200 h, Forklift LINDE H25D-02 duplo300 FREELIFT/SIDESHIFT 2014 4200 hours DIESEL Gusdozqu D Nspfx Alcji

Condition: like new (used), Year of construction: 2025, Used cantilever rack: bolted system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 2,600 mm with base section 1,000 mm 12 cantilever arms, 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized Guedped Tbbdofx Alcei - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The ground must be made of concrete, be level and suitable for dowels, and be able to absorb the applied loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system with hot-dip galvanized finish Scope of supply: 4 rack uprights, 4,160 mm high, with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (1,300 mm spacing) Fastening material (screws, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with prior notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The ground must be made of concrete, be level and suitable for dowels, and be able to withstand the acting loads. The ground conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. Gjdpfsd Tqalsx Alcsui The rack uprights must be anchored in the ground on-site; anchoring to the wall is not necessary and is not recommended. According to the occupational association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system in hot-dip galvanized finish Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical consultation - Made in Germany - Short delivery time - On-site collection possible Gedpfx Alofdkbhecjui Our cantilever racks are produced exclusively in Germany. We offer reliable transport with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The base must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational accident insurance association, it is recommended that the rack uprights have a minimum of 500 mm overhang from the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system with hot-dip galvanized finish Scope of delivery: 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (spacing 1,300 mm) Fastening material (screws, nuts, and washers) Gujdpfx Alefdkb Tocsi - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height at 100 mm intervals - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with prior notification of delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by wind and snow loads. The substrate must be made of concrete, level, and suitable for dowels, and must be able to absorb the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored to the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: excellent (used), Cnc rotary table, Nikken 5AX-230 4 and 5 axis for Mazak etc. was mounted on a VTC 300, due to new machine 5 axis now for sale, Guedpep U Umkofx Alcji

Condition: used, functionality: fully functional, machine/vehicle number: 0409113, total width: 1,009 mm, total length: 902 mm, total height: 678 mm, empty load weight: 165 kg, input voltage: 380 V, Range: Trégor Tradition Dough weight range: 50 to 1,450 g Capacity: up to 1,800 pieces/hour Baguette capacity: 1,500 pieces/hour Serial number: 04/09/113 Rollers: 1 pre-lamination + 2 lamination Adjustments: 2 selector knobs with 36 positions Belts: woven wool on a synthetic base Belt thickness: 7 mm Side walls: 12 mm food-grade aluminum Folding safety guard Removable scrapers by unclipping Removal of both belts: approx. 33 min Power: 0.55 kW Power supply: 380 V Frequency: 50/60 Hz Current: 1.75 A at 380 V Dimensions: 1009 x 902 x 678 mm Weight: 165 kg General description This used MERAND Trégor Tradition dough sheeter, from the previous Mécapâte generation, is designed for laminating, rounding, and shaping dough in professional bakeries. Its vertical design allows for working with a documented range of 50 to 1,450 g, with a capacity that can reach 1,800 pieces/hour depending on the weight and type of dough. The shaping process uses three rollers, including one Alvéo+ pre-lamination roller and two lamination rollers. The dough is then elongated between two belts moving in opposite directions. This configuration is particularly suitable for preparing baguettes, short loaves, half-baguettes, and various other bakery products as intended by the manufacturer. Key advantages: Dough weight range from 50 to 1,450 g Capacity up to 1,800 pieces/hour depending on the dough Three rollers for pre-lamination and lamination Guedsz Ehwcjpfx Alcei Lamination and elongation adjustments on 36 positions

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: 65/2/158/02, functionality: fully functional, pressing force: 65 t, stroke length: 120 mm, table length: 580 mm, throat depth: 280 mm, total width: 820 mm, punching force: 65 t, Used 65ton mechanical power press for sale Video at the bottom of this listing MODEL 65 CNR 4 SERIAL N° 65/2/158/02 NOMINAL FORCE (Max stroke) 650 [ KN] MACHINE WEIGHT 5000 [ daN] NOMINAL SPEED 73 [ C/min ] VARIABLE SPEED MIN/MAX [ C/min ] MAXIMUM CLUTCH ENGAGEMENTS 36 [ C/min ] CLUTCH PRESSURE MIN/MAX 4 / 5,5 [ bar) MAXIMUM STOPPING TIME 0,154 SAFETY DISTANCE 246 [ mm ] FLYWHEEL ENERGY 3440 [ KJ] STROKE LENGTH MIN/MAX 10 / 120 [ mm ] RAM ADJUSTMENT 100 [ mm ] SHUT HEIGHT S.D.A.U. 320 [ mm ] MAXIMUM EJECTOR STROKE 40 [ mm] Guodpfx Aoxqn Unjlcsi TABLE SIZE 68 / 580 / 820 [ mm ] RAM SIZE 340/ 470 [mm] TOOL SPIGOT DIA 45 [ mm ] THROAT DEPTH 280 [ mm ] MAX TOOL SIZE 340 / 470 [ mm ] MAX TOP TOOL WEIGHT 136 [ daN]

Condition: used, Features Siemens IE3 type electro magnetically braked motors All spindle motors with Star delta starting system Godpfxsz Il Tgj Alcjui Edge reference straightening system 65 mm high fences Telescopic bedplates between vertical spindles Infeed side pressure unit Double side pressure unit opposite fence side head moving with near side head with pneumatic loading Adjustable side guides after near side head Pad pressure after top head with vertical screw adjustment and mechanical digital readout 2000 mm pre-straightening infeed table with fence each 10 mm adjustment 40 mm diameter spindles belt driven, with spindle speed of 6000 rpm All spindles have horizontal and vertical adjustment, with mechanical digital readouts for fast and accurate setting Independent manual vertical adjustment to top head High precision spindle units with high speed bearings All bedplates and fences have 0.3 mm hardened chrome HRC at 60° Automatic bed lubrication system with timer control Chipbreaker assembly before first and second top head with twin cylinder pneumatic loading One piece heavy duty cast iron main frame with optimum vibration absorption Centralised lubrication system to all main slides Vertical spindles have 80 mm vertical adjustment Horizontal spindles have 40 mm horizontal adjustment Safety interlock at infeed to prevent feeding oversized material ATS electronic positioning by keypad control and motorised adjustment to near side spindle horizontal movement with dual LED measurement display for tool compensation to give radius and actual cutting sizes (Model REC-705B) ATS electronic positioning by keypad control and motorised adjustment to first top spindle vertical movement with dual LED measurement display for tool compensation to give radius and actual cutting sizes (Model REC-705B) – additional LED dual readout display Type REC-720 positioned at first top head ATS electronic positioning by keypad control and motorised adjustment to second top spindle vertical movement with dual LED measurement display for tool compensation to give radius and actual cutting sizes (Model REC-705B) – additional LED dual readout display Type REC-720 positioned at second top head Note: The REC-720 LED dual readouts are linked together with the main REC-705B controller so that they both read the same whether the spindle is adjusted from the top head position manually or at the infeed controller with motorised adjustment – both top heads move together. Lift up sound and safety enclosure including internal lighting and safety interlocks Interlock to lift up enclosure Dust extraction hoods outlet diameter 150 mm Toolkit Instruction and maintenance manual, electrical diagram and parts list. Machine supplied with electrics arranged 3/50/415 V 1 no. CE Pressure Regulator Machine conforms to CE specification

Condition: good (used), functionality: fully functional, Year of construction: 2017, mobile Air filter extraction box Box with built-in fan and filter cartridge. With HEPA filter. for ventilation, room air filtration and extraction. extraction capacity ca 1800m3/h extraction fan: IMOFA DS 11-4 460watt 50 Hz 4.8 Amp voltage: 230v 50Hz Systemair RTRE 5 transformer controller 4 pcs filter cartridges 1 pc ULTIMA RP Hepa filter 3000m3/h Aluminum frame housing, mobile brakeable wheels dimensions: 100x100x80 cm weight: ca 120kg Gedpfx Alovvcqxecsui

Condition: used, mileage: 403,000 km, power: 243 kW (330.39 HP), first registration: 11/2012, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro5, loading space length: 7,676 mm, loading space width: 2,528 mm, loading space height: 2,696 mm, Year of construction: 2012, Equipment: air conditioning, Manufacturer Volvo Godex R Rn Hepfx Alceui Model FM 330 4x2 7,7 m Curtainsider and Taillift Year 2012 Condition Good Serial Number YV2J1D1A4DA736557 Ref. nr. 1508060 Reg. date: 16-11-2012 Last seen: 18-11-2025 Hk: 330 Km: 403000 Gearbox: I-shift Eurotype: 5 Diesel tank: 1 Tank liter: 530 Air conditioning: ? Radio: ? Disc brake: ? ABS: ? Engine brake: VEB Tire Size: 315/70R22,5 - 315/70R22,5 Front suspension: Air Suspension rear: Air Wheelbase: 5600 mm Toolbox: ? Total weight: 18000 Kg Net weight: 9150 Kg Load capacity 8850 Kg Inside length: 7676 mm Internal width: 2528 mm Interior height: 2696 mm Lift Brand: Zepro Lift capacity: 2500 Kg

Condition: new, SALES FROM STOCK Loading Capacity: 240 kg Max Platform Height: 4 m Occupants: 1 Platform Dimension: 1.15 x 0.6 m Overall Length: 1.32 m Overall Width: 0.76 m Overall Height: 1.92 m Platform Extension: 0.55 m Extension Load: 100 kg Up/Down Speed: 34/25 sec Turning Radius: 0 Maximum Slope: 1.5°/2° Drive Tyres: 230 x 80 mm Gradeability: 25% Wheel Base: 1.0 m Travel Speed (Stowed): 4 km/h Travel Speed (Raised): 0.5 km/h Godpfxsulah Nj Alcoui Battery: 2 x 12 V / 100 Ah Lifting Motor: 24 V / 1.3 kW Drive Motors: 24 V / 0.5 kW Charger: 24 V / 15 A Weight: 660 kg Proportional Controls Automatic Pothole Protection Drivable At Full Height Non-Marking Tyres Automatic Brake System Emergency Lowering System Emergency Stop Button Cylinder Holding Valve Onboard Diagnostic System