Joos HP 90 veneer press

Joos HP 90

Condition: as good as new (ex-display), total pressing surface 2550 x 1350 mm total pressing force 900 KN (=80 MP) Chodpfx Aj T R Nhsd Isc specific pressure force 2,6 daN/cm² (kp/cm²) 4 cylinder 80 mm diameter 400 mm stroke operating pressure 355 bar anodized heating platens, tooth rack guidance

Condition: used, Year of construction: 2000, With electric height and tilt adjustment Used, excellent condition, little used Make Altendorf Type F45 Year of manufacture 2000 Machine number GS-tested Motor 4 kW Steel guides Carriage length approx. 3000 mm Cedpfx Adjvxlq Hj Ishc Cutting width approx. 1050 mm Pivoting up to 45° Prepared for scoring unit Parallelogram guard Tabletop extension Anodized aluminum parts Electric height adjustment Electric tilt adjustment Digital display: - Cutting angle - Speed Extraction connection D 120/80 mm Space required approx. 3010 mm x 1800 mm x 1500 mm Weight approx. 1000 kg Storage location 97447 Gerolzhofen, free on load, unpacked Sold in the current condition as seen, without warranty or guarantee

Condition: used, Year of construction: 1976, Pressing area: 2500mm x 1250mm Opening: 360mm Top platen heating: electric Bottom platen heating: defective Csdpfx Asx Edl Eed Ijhc Platen surface: aluminum, anodized Pressing force: 90t Number of cylinders: 4 Power consumption: approx. 33A Machine length: 3000mm Machine width: 1500mm Weight: 4000kg

Condition: good (used), Year of construction: 1962, Large band saw with a 1250 mm roll diameter with central cutting device 45 kW motor Roll width 120 mm with electric blade tensioning the upper roll has been removed for transport Csdpfx Adofnh T Io Ijhc in very good condition, as it has been used little and was overhauled in 1997.

Condition: used, Year of construction: 2007, machine/vehicle number: Werksüberarbeitungsnummer: WÜA1363DK-F7560, Used Machine GM020.0068 AKV 3003 DK - F Year of manufacture: 2007 Specification: 3 mm Chsdpfx Adew Nih Ie Iec 1st milling station: Combination Surface pull scraper with extraction Chassis Pneumatic milling adjustment Limit switch lever, 7.5° inclination

Condition: good (used), Year of construction: 1997, Double miter saw RAPID DGS 200 Year of manufacture 1997 Drive: 2 x 2.2 kW, 400 V Swiveling range, manual: 45° to 90° Saw blade: 420 mm Ø Saw feed: pneumatic Cutting length: 4000 mm Profile clamping: 2 horizontal clamping cylinders 2 vertical clamping cylinders Length adjustment: manual Cjdpfehctt Ejx Ad Ijhc Length display: digital Air pressure: 7 bar Profile support: fixed on the outside, movable in the center Dimensions (L/W/H): 5200/1200/1500 mm Weight: 800 kg

Condition: good (used), Code: 0120 Brand: ORMAMACCHINE Model: NPC/3000S - CE Standard Hot press with diathermic oil for wood, veneer, wood panels, coated panels, veneer, composite materials, cork, aluminium and various materials - CE Standard Platen dimensions mm 3000 x 1300 Thrust ton 70 N° 6 pistons Opening mm 400 Motor Hp 2 Heating with diathermic oil by electric boiler Cedozil Ipopfx Ad Iehc Mylar-coated platens Overall dimensions: mm 3600 x 1550 x 1900 h Weight kg 3500

Condition: used, Year of construction: 2016, operating hours: 14,279 h, machine/vehicle number: 644063, delivery quantity 4.61 m³/min at 10 bar delivery quantity 5.23 m³/min at 8 bar operating pressure 10 bar nominal power 30.0 KW operating hours 14,279 load hours 11,148 compressed air connection G1 1/4" sound level 69 dB(A) space requirements length - 1,400 x width - 830 x height - 1,640 mm Cjdpon Stanjfx Ad Ijhc weight approx. 850 kg

Condition: used, Year of construction: 2001, Bottom / right / left / top with Centro Fix cutter heads. Min/Max. working width (finished dimension): 23 - 180 mm Min/Max. working height (finished dimension): 6 - 105 mm Min. workpiece length: 300 mm Feed rate: 6 / 12 rpm Spindle speed: 6000 rpm Csdpfxoym D Eio Ad Ishc Spindle diameter: 35 mm Motor power, horizontal spindles: 7.5 kW Motor power, vertical spindles: 5.5 kW Feed motor power: 1 kW Diameter of feed rollers: 120 mm Dust extraction nozzle, 1 piece: 150 mm Dust extraction nozzle, 2 pieces: 120 mm Weight: approx. 950 kg Location: Nattheim

Condition: used, Year of construction: 2007, Heating plate press Manufacturer: OTT Type: Solid 16-32 Year of manufacture: 2007 Cjdpfx Adjzuzxno Iohc Technical data Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.