Glue press

ITALPRESSE PL/9

Year of construction: 2011, condition: excellent (used), This is a complete plant for house construction. Prices are listed with each item. Consisting of the following individual elements (see attached document as well): Photos will follow, they are already included in the attached document. Table 1 (Positioning and clamping of the frame structure) €34,500 - Elevating longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross clamping - Connections for compressed air and electricity Table 2 (Applying the first sheathing and fastening) €25,300 - Longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate conveyor 3 m long €4,600 (Parking station for multifunctional bridge) - Longitudinal conveyor with 3 hinge conveyors Table 3 (Applying the second sheathing, fastening and turning the element onto the next table) €35,650 - Longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross clamping - Connections for compressed air and electricity - Hydraulic turning device Table 4 (Electrical installation and insulation) €34,500 - Cross conveyor with rollers and sheathing - Table traverse drive - Connections for compressed air and electricity - Hydraulic turning device Table 5 (Applying the first sheathing and fastening the second side) €32,775 - Longitudinal conveyor with 3 hinge conveyors - Cross conveyor with rollers Kedpfx Agou D Amgs Uedg - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate conveyor 3 m long €4,600 (Parking station for multifunctional bridge) - Longitudinal conveyor with 3 hinge conveyors Table 6 (Applying the second sheathing and fastening) €28,750 - Longitudinal conveyor with 3 hinge conveyors - Pneumatic cross clamping - Connections for compressed air and electricity Table 7 (Erection and distribution table) €29,900 - Longitudinal conveyor with 3 hinge conveyors - Hydraulic tilting unit - Table traverse mechanism - Upper guide for holding the walls vertically Manual surface gantry with vacuum lifter on Table 2 €13,800 (Applying the first layer of sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 3 €13,800 (Applying the second layer of sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 5 €13,800 (Applying the first layer of sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 6 €13,800 (Applying the second layer of sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Wall storage 1: 12 m long x 24 tracks €11,500 Wall storage 2: 12 m long x 20 tracks Vacuum lifter with column slewing crane €9,200 1 cross beam 2 t Abus €20,125 1 cross beam 2 t

Condition: repair required (used), HYDRAULIC HOT PLATE PRESS, MODEL LS/L/R 30/13 SP. 150 mm Composition Kodpfon R Dihjx Ag Uedg - LOADER - HYDRAULIC PRESS WITH HOT PLATENS, MODEL LS/L/R 30/13 SP. 150 mm - 3000x1300 mm HOT PLATE ROLLERS UNLOADER Press platen dimensions 3000x1300 mm. Press plungers No. 6 Ø 70 mm stroke 200 mm. Press platen thrust 70 t.

Condition: used, Thread rolling machine ORT RP18 2-roll Spindles diameter 69.95mm Kodpfxst Apuge Ag Uodg See video The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy Power (Ton): 18 Number of rollers: 2

Condition: excellent (used), VK450 2RE log peeler.Equipped with two rotors. Kodjulv Hzspfx Ag Ujdg One is a stump rotor. The other is the peeling rotor. Min-max tree diameter 8-45 cm. Min tree length 3 m. Complete with original VK centring conveyor. To be sold after overhaul.

Year of construction: 2000, condition: good (used), EWD Combimes edging line. Year of manufacture: 2000, type DK90-TL. Timber feed from the left. Maximum edging width 500 mm, maximum edging thickness 120 mm. 90 kW drive motor. Cycle rate with 4.0 m wood length approx. 18 pieces/min. Complete with original EWD control system. Delivery from the accumulation conveyor before singling through to the sliver separator included. The line is complete and in good condition. Kodpfxsxcwvxe Ag Uodg

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Kjdpjw Sy T Hefx Ag Uodg Storage location: Nattheim

Condition: ready for operation (used), Panel length: 3200mm, panel width: 1000mm, max. workpiece thickness: 38mm, min. infeed length: 500mm. Kdodpfx Agsm Habde Ujg

Condition: used, functionality: fully functional, pressing force: 200 t, table width: 300 mm, cutting height with scoring (max.): 100 mm, milling spindle length: 250 mm, Equipment: 1 GRECON feed transfer with accumulation of 4 to 5 cleaned lamellas of different lengths for finger-jointing 1 GRECON double finger-jointer for deep teeth (for glulam beam production) 1 180° transfer with two-component gluing system 1 GRECON finger-jointing press 1 CNC-controlled cross-cut saw Kjdpfx Aowz H Anog Usdg 1 outfeed table

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, feed length X-axis: 13,000 mm, feed length Y-axis: 240 mm, feed length Z-axis: 100 mm, feed rate X-axis: 25 m/min, pressing force: 40 t, input voltage: 400 V, total height: 1,120 mm, working height: 1,120 mm, milling spindle length: 330 mm, control voltage: 400 V, workpiece height (max.): 100 mm, tool diameter: 240 mm, rotational speed (max.): 6,000 rpm, air pressure: 7 bar, total length of planing tables: 13,000 mm, We offer a fully automated production line for the manufacture of KVH structural timber. The line is fully certified with CE marking and by the Wood Technology Institute in Poznań. Compliant with ENPN 14.081 and 14.081 standards 1. Angled discharge conveyor 2. Infeed table for visual wood grading 3. Buffer before defect cutting saw Kedpfx Agsxfzyyj Usdg 4. Automatic defect cutting saw with camera for fluorescent chalk 5. Buffer before finger jointing machine 6. Finger jointing machine with glue applicator and cross-cut saw for lengths up to 13 m 7. Chain conveyor storage from finger jointing machine to four-side planer 8. Automatic infeed for four-side planer 9. Four-side planer Winter 6-33 10. Outfeed roller conveyor from four-side planer 11. Automatic packaging machine for planed timber 12. Chain conveyor 13. Strength tester for laminated timber

Condition: excellent (used), Self-loading press for gluing Orma LS/ECO/CA 30/13 Working length 3000mm Working width 1300mm Automatic material loading Glue application system Kjdpfxsv Nhx Uj Ag Ujdg Shelves heated with oil to 130C Top pressure force 57t Side pressure force 9t Year of production 2001 CE certificate