Paper press, paper press, waste press

HSM HSM Ballenpresse HL 4010 Re (3437)

Condition: ready for operation (used), Baler Hsm vk 42/1200 fully automatic Dodpfx Akora Nrxekeuw Pressure force: 42 tons Beam dimensions: 700 x 800 x 600 - 1200 mm Beam weight: approx. 450 kg Press length approx. 7 meters press weight approx. 6000 kg tying 4 x wire automatically

Condition: ready for operation (used), Technical specifications of Dixi 60 AUTOMAT baler Filling opening (W x H): 1550 x 1000 mm Drive power: 31.5 kW Pressing force: 60 t Bale weight (depending on material): 350–600 kg Dsdpfov Amw Njx Akkouw Bale dimensions (W x H x D, adjustable): 1100 x 800 x 300–1600 mm Pressing/cycle time: 13/24 s Machine weight: 7000 kg

Condition: excellent (used), Year of construction: 2014, operating hours: 37,656 h, functionality: fully functional, pressing force: 85 t, filling opening width: 1,500 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 650 kg, overall weight: 25,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2024, volume flow: 410 m³/h, transport width: 2,400 mm, transport length: 9,300 mm, Hello, We are offering you a used baler from the manufacturer Presona AB, type LP 85 VH1, subject to availability. Duodov T I Evspfx Akksw The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours, as of March 2025 Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying system: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: The machine was used for compaction at a recycling plant. Used for the production of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have been replaced over the past three years. The machine has been regularly serviced. We would be pleased if this press is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: W230-028, pressing force: 80 t, warranty duration: 24 months, pressure: 250 bar, power: 45 kW (61.18 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler. This is a baler HBC80 (45kW) with crosswires. At the time of writing this baler is being completely refurbished in our refurbishment workshop. Dujdpfstvat Tox Akkjw This refurbishment takes place on the basis of the very strict Bollegraaf OEM Refurbishment Guidelines. After refurbishment, this baler is sold with a 2-year warranty.

Condition: used, mileage: 325,000 km, Year of construction: 2016, 3-axle 6x4 truck, classifiable as a work vehicle, equipped with a TAM T25-56 series hook lift system, LIV L170Z96 series crane, year 2018, with hydraulic clamp, automatic transmission, retarder, towable, Euro 6 standard. N.B. Please note that the vehicle description is to be considered indicative and may contain errors or inaccuracies. We therefore invite you to contact us to verify the exact correspondence of the data. Dodpfewmfqujx Akksuw

Condition: used, Year of construction: 2014, operating hours: 7,400 h, functionality: fully functional, BRAND: WILLIBALD MODEL: EP5500 YEAR: 2014 HOURS: 7,400 Duodpfx Asy Iwa Rekkjw EXTRAS: 48 hammers SERIAL NUMBER: #134 REGISTRATION NUMBER: 98.14.XX-552

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 00128-0010-01, total width: 2,000 mm, This used Bollegraaf chain conveyor is being sold by Bollegraaf Recycling Solutions and is offered in combination with an extra-strong pre-press for large cardboard boxes and octabins. The chain conveyor is of the type Bollegraaf HBT 2250/2000. The corresponding extra-strong pre-press for large cardboard boxes and octabins is also equipped with a so-called wirbulator. Technical specifications chain belt conveyor: Manufacturer: Bollegraaf Type: HBT 2250/2000 Year of construction: 2008 Drive power: 7.5 kW Dedeyu Stkepfx Akksuw Length of feed belt: 8,300 mm Length of inclined belt: 19,250 mm Length of swan neck: 2,400 mm Inclination angle: 30° Effective width: 1,960 mm Feed belt sidewall height: 500 mm Inclined belt sidewall height: 800 mm Weight: 16 t

Condition: excellent (used), Year of construction: 2015, operating hours: 20,331 h, functionality: fully functional, pressing force: 100 t, filling opening width: 970 mm, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 33,000 kg, Good day, We hereby offer you, without obligation, a used, complete baling press line consisting of a baler manufactured by HSM, type VK 8818 R-FU, including conveyor technology and wire tying stations. The following technical data was taken from the manufacturer's operating manual and brochures, for which we cannot guarantee accuracy or completeness. Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Number of bales pressed: 29,020 bales (as of September 2025) Press force (main press): 1000 kN Specific pressing force: 120 N/cm² Shear edge ejector force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time (idle): 8.3 seconds Theoretical output capacity: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Connected load: 110 kW Total current consumption: 213 A Fusing: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Output at bulk density: 20 kg/m³: 12.86 t/hour 50 kg/m³: 32.15 t/hour Bale weights (approx. 1.2 m bale length): 650 up to 750 kg per bale, material-dependent Hydraulic oil tank volume: 2000 L HVI 46 PLC control system: Siemens S7-300 Control panel: Siemens TP 700 Baler dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Space requirement (with conveyor): 35,000 x 8,480 x 7,745 mm (L x W x H) Baler weight: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional Optional Equipment Ordered: – Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to the standard 2 x 45 kW drive, with same performance – Manual activation/deactivation of the number of wire bindings to save tying wire on non-expansive material – Shear edge ejector with 121 kN pressing force – Sensor-based wire monitoring, with baler shut-off in case of wire breakage or wire end – Bale chute – Optical warning signal, mounted on the control cabinet Condition of the Baler: The complete baling system (baler and conveyor technology) is in good, ready-to-use condition. The unit has been cleaned weekly, lubricated, and maintained according to manufacturer specifications by the operator. Technical Data – Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Feeder belt length: 7,000 mm Inclined belt length: 14,500 mm Gooseneck length: 1,550 mm Incline: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of Delivery: – HSM VK 8818 R-FU baler – Maintenance platform – Bale chute – Wire diverting stations – Wire spool trolleys (without wire spools) – Stadler KF 1800 chain belt conveyor – Transverse sliding belt conveyor Dsdeyz Af Ejpfx Akkeuw – Pit cover from feed conveyor to pit – Second control cabinet to operate the baler from the conveyor – Machine documentation in English Delivery Time: The complete system has already been dismantled, placed into storage, and can be loaded at short notice following receipt of payment. We would be pleased if this or one of our other balers might be of interest to you. Your Service Team Mertens & Frowein GmbH

Condition: reconditioned (used), bale length: 1,200 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 380 kg, Press in perfect condition, unused after overhaul. Serviced only by the manufacturer. Perfect condition. Fully automatic operation. Adjustable bale length: 600-1200mm. 15 kW motor. Year: 2007. Bale weight approx. 380 kg. Duodpfx Akex S Sbdeksw

Condition: used, Bramidan 4-X25 – High-performance baler for waste compaction Suitable for various materials, including stretchable types Large, wide chamber Safety locks prevent material expansion inside the chamber Short cycle time allows fast waste processing TYPES OF WASTE: Cardboard Plastic film Paper PET bottles Aluminum cans Rigid plastics Textiles EPS Styrofoam Steel cans Dusdpev Ak Dgefx Akkow BALE DIMENSIONS 1200 x 800 x 800 mm PRESSING FORCE 25 t BALE WEIGHT Cardboard (kg): 200-300 Plastic film (kg): 250-350 Price 4500 EUR