Mobile shredding plant

Doppstadt DZ-750 kombi

Condition: refurbished (used), Year of construction: 2008, operating hours: 8,200 h, Doppstadt DZ 750 Kombi - Year of manufacture: 02/2008 Dcjdjyxkwwopfx Am Rsh - Pre-shredder roller with 21 teeth - 2 x overband magnet - Central lubrication - Remote control - Mercedes Benz engine 480 kW (652 HP) at 1,900 rpm - Weight 46,000 kg - Secondary shredding rotor with 36 free-swinging hammers - Screen basket 120 mm (other screen baskets available) - Rear discharge belt 7 m - Rotor with 36 hammers Machine is overhauled and immediately available.

Condition: reconditioned (used), VK 450 The debarker has been completely refurbished Dcodpfjq Hr N Iex Am Rjh

Condition: like new (used), The MSP 120 ZK is ideally suited for crushing and subsequent briquetting of various types of metal chips. The MSP 120 ZK briquetting press with integrated shredder is composed of a hydraulic chip press paired with an upstream shredder, both perfectly matched to each other. This system enables the crushing and compaction of chips generated during turning and milling operations. The volume is significantly reduced, and the briquettes are separated from the coolant lubricants (emulsion, oil) absorbed during earlier machining processes. The system consists of a feed hopper for loading the material to be processed and a shredder inside the hopper, which reduces chip length. A conveyor system moves the shredded chips continuously and stepwise via a conveyor belt into the chip press hopper. There, two augers feed the material into the compaction chamber. The system is equipped with a monitored liquid collection tank and pump, allowing coolants to be returned to the production process. Cycle control is managed by a PLC and an electronic level sensor for the monitoring of the hopper fill level. Optionally, a tipping device can be added for manual loading of the unit. Briquetting Press: Throughput (Aluminum): 15–20 kg/h Dcjdpfxew R Ranj Am Roh Throughput (Steel, Copper): 45–60 kg/h Briquette diameter: 60 mm Productivity: 120–180 pcs/h Specific pressure on briquette: 1,050 kg/cm³ Motor pump power: 7 kW Total installed power: 10 kW Voltage: 400V / 50 Hz Oil tank: 80 l Dimensions: 1,400 x 1,200 x 1,050 mm Weight: 800 kg Shredder: Number of knife shafts: 1 pc Motor power: 5.5 kW Number of knives: 16 pcs Exchangeable knives: Yes Knife size: 25 mm Knife material: Hardened steel Shaft length: 400 mm Screen mesh size: 20 mm Hopper inner diameter: 1,000 mm Hopper volume: 1 m³ Weight: 280 kg Power supply: 380V Overall system dimensions: 2,820 x 1,862 x 2,065 mm Colour: Textured paint, RAL 7035 light grey

Condition: new, Year of construction: 2024, New Aurepa ADR Trailer tank nitrogen, oxygen, argon, gas, cryogenics CRYOBASE tanker New trailer: Year of manufacture of trailer: 2024, made in Germany All necessary documents are available Used tank: Working pressure: 3.85 bar Capacity: 2000 L Delivery is possible. We also have other tankers for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen, carbon dioxide, hydrogen, methane Djdpfxjt R R Uqe Am Rech We would be happy to provide you with a quote or more information.

Condition: refurbished (used), FULL LINE of Drilling, max working width mm 3200, with fast automatic handling equipment. Composed of the following machines: A) LOADER (Portal) "RBO" Winner C 3200 with double pick-up and central motorized rollers table. With 2 on-ground motorized rollers ways to in-feed the piles (stacks) of panels to loader. Dcedpfsdfgg Ijx Am Reh B) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° C) 1st Auotmatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units D) 2nd Automatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units E) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° G) UNLOADER-STACKER (Portal) "RBO" Winner SC 3200 with double pick-up, with double storage station, with central motorized rollers table. With 2 on-ground motorized rollers ways to out-feed the piles (stacks) of panels from the Unloader

Year of construction: 2013, operating hours: 84,545 h, condition: ready for operation (used), General Data Machine weight 17500 kg Main Drive Punching force 220 kN This TRUMPF TRUPUNCH 5000 S10 was manufactured in 2013. It features a Siemens Sinumerik 840D control system, a working area of 3050x1550 mm, and a punching press of 220 kN. Capable of handling sheet weights up to 280 kg and thicknesses up to 8 mm, it includes a Linear ATC for 21 tools and additional options like MULTITOOL and ENGRAVING. Regularly maintained and in good condition. Contact us for more information about this machine. Application Types Punching Dcjdpex D Nwwofx Am Rjh

Condition: good (used), Year of construction: 2001, machine/vehicle number: 169134, MANITOU MLT629-120 4WD Loader No. 169134 Dcjdpfjwhccdjx Am Reh 87.6 kW 2001

Condition: good (used), functionality: fully functional, Screen area: approx. 1,300 x 4,000 mm Dcjdotpgvxopfx Am Rjh new semi-mobile steel construction

Condition: new, power: 10.3 kW (14.00 HP), fuel type: gasoline, Brugger HX10 shredder - Powerful, compact and versatile! The Brugger HX10 shredder is the ideal solution for all gardening professionals and hobby gardeners who are looking for a powerful yet maneuverable shredder. With its powerful 14 hp petrol engine and robust design, the HX10 effortlessly shreds branches and trunks with a diameter of over 10 cm. Whether in private gardens or on larger sites - this shredder brings power to every corner! Thanks to its narrow design, the HX10 is perfect for use in confined areas. The device can be easily adjusted by hand and maneuvered with ease, allowing you to work efficiently even in difficult garden areas. With a width of just 80 cm, the HX10 can get through any garden gate. Your advantages at a glance: - Powerful: 14 hp petrol engine for powerful shredding - Effective: Processes branches and trunks up to a diameter of over 10 cm - Compact and maneuverable: Narrow design for easy maneuvering in small spaces - Easily adjustable: Flexibly adjustable for comfortable working - Perfect for horticulture: Ideal for use in private and professional gardens The Brugger HX10 - your all-purpose weapon for efficient garden maintenance! Technical data: Dimensions: 140 x 80 x 165cm (l x w x w) Weight: 185 kg Dsdoumv E Hjpfx Am Roch Blades: 2, 30cm wide Max. Diameter: 10cm Processing/h: 4-6m3/h Feed hopper: 51 x 42 cm --- All prices plus VAT. Contact us for a customized offer!

Condition: excellent (used), Year of construction: 1993, CNG Tank Gas Methane Trailer Natural gas 200 Bar Manufacturer: SAMRO Year: 1993 Tare: 6900 kg Dsdpfx Amet D Apte Rjch We also have other tanks for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane We would also be happy to provide you with a quotation or give you more information about other pressure vessels.To discuss the possibilities, please contact us by phone or e-mail.