Briquetting press

DIPIU MB60

Condition: used, Year of construction: 1992, Technical details: max. temperature: 120 °C internal diameter: 980 mm internal length : 2580 mm external diameter: 1500 mm external diameter : 2740 mm wall strength: ca. 6,5 mm content: ca. 2000 l weight: 1425 kg Itedpfxeu Nz I Tj Aa Ieh Autoclave tank It is possible that this autoclave were built for the process of steam sterilization (according to operating parameters) The operating overpressure of +2 bar per room probably refers to the execution of the steam sterilization process, not to the pressure resistance of the container. - Permissible operating temperature 120 °C *

Condition: used, Year of construction: 1993, Technical details: mould plates - length / width: 500 x 400 mm Heating: Zweistufen Heizung 4,6 und 6,0 kW control: SPS voltage: 380 V (3x 20A) / 24 DC V Itsdpfx Aju Nu Hisa Ioh work height adjustable: 870 - 970 mm total power requirement: 6 + 2,5 kW dimension machine xH: 2,8 x 1,1 x 1,3 m weight: 570 kg Compact angle welding machine with shrink tunnel PACKAGING MACHINE WITH SHRINK TUNNEL AND COOLING STATION AND SPECIAL COOLING FAN movable/mobile Application areas/products: -div. brochures, plans or other made of paper/cardboard in DIN A 5 / DIN A 6 Applicable films: all half tube shrink films up to 0,060mm Welding system = impulse welding, with teflonized separation seam, adjustable automatic transport of goods into the shrink tunnel further details: -Tunnel passage width: 450mm -Tunnel passage height adjustable to 100, 200, 300 and 400mm -length of the heatable tunnel hood 900mm -Prod. output of the machine depends on product and film 5 to 20 cycles / minute (manufacturer's data) -max. film width (folded half tube) 550 / 550mm at 25 - 50 my -frame dimension 500 x 500 x 290 mm = max. Verpackungsmaß Heating: -two stage heating 4,6 and 6,0 kW -Fan infinitely variable Cooling station: -outlet 300mm -with blower Conveyor belt: -feed rate 2.5 - 12 m/min -steplessly adjustable i.d. *

Condition: ready for operation (used), Can filling machine diameter 77 mm and 99 mm. VEMAG type FKF for filling in cans. Iedpfx Aajimblqs Isth Note: The byer will another machine- same as the offered for spare parts.

Year of construction: 2004, condition: excellent (used), Four-side planer -max. planing width 23cm -max planing height 16cm -2 pulling rollers in the table -chromed table - smooth regulation of the feed speed -2 pulleys from the top in front of the lower head, additionally a roller apparatus for short elements - 4 spindles: lower 5.5kW, right 5.5kW, left 5.5kW, upper 7.5kw Itodpehlp D Nsfx Aa Ish The machine is in very good condition, little used, with spiral heads on the bottom right and left, with a Terssa knife head on the top.

Condition: like new (used), Rotary autoclave SURDRY 1 B Itodpfx Aaexp Rqvj Ish

Condition: ready for operation (used), Autoclave for cans Isdoyyvi Iepfx Aa Ijth

Condition: used, Year of construction: 2012, Transverse chain conveyor with 4 units, length 6 m Log loading cradles with singulation connecting rods, 4 units Mobile cutter debarker with mechanical arm, min/max log length 1000/6000 mm, min/max log diameter 200/1100 mm Paddle chain waste removal conveyor, width 600 mm, length 10 m, ascending Installed power: 35.2 kW Compressed air consumption: 100 NL/1' Itedpfx Aaeyappao Ioh Cutter width: 300 mm

Condition: as good as new (ex-display), Year of construction: 2010, Capacity 180 - 300 kg/h Diameter of the briquets 50 mm Isdpfexy S E Nsx Aa Ieth 0,3 m³ lubrication pump 1,0 kW engine output 15 kW

Year of construction: 2013, condition: used, Drying chamber with false ceiling ventilation and frontal trolley loadingfor the production and conditioning of 3 mm oak lamellas, at initial moisture 12 tomax. 15 % / final humidity 7 %used, good conditionmake Mühlböcktype ZSWM2110-1180C - 1.0 l/h at 40° C over 30 % HFyear of construction 2013rated power 7 kW/15Afrequency 50 Hzcontrol voltage 24VDC/230VACprotection class IP54content:the chamber holds- 2 packages in width a 1.10 m - with 0.20 m space between each package- 1 package in height a 1.80 m - with 0.10 m thick underlays and a 0.10 m high free space- 2 packages in length a 2.20 m - plus 0.60 m free spaceThe chamber contains 4 stacking packages and has a total gross volume of 17.4 m²The chamber has a net capacity of 4 m³ of timber - with a timber thickness of 3 mm and a stacking strip thickness of 10 mmand 90 % width utilization with edged ble dimensions of each chamber: Width 2.40 m x height 2.30 m x length 5.00 m- aluminum cassette construction- aluminum frame- dimensionally stable rock wool insulation- aluminum trapezoidal sheet- snow load 100 kg/m²- 2-leaf hinged door- front loading- 2 fans a 3 kW (D=800 mm)- stainless steel/aluminum finned tube heating coil with 50 kW, flow temperature of 80 °C, return temperature 73°C- servo-controlled supply and exhaust air flaps- cold water spraying- chambers work fully automatically- computer control K5Disassembly: Customer locationhandover as viewedwithout guarantee and warranty Itsdovwfhijpfx Aa Ijh

Condition: used, Max. Length: 6000 mm Ijdpowf Hivsfx Aa Isth Width: 1300 mm complete with gluing machine