Carcase press

Comil Cosmo NK1

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Working area X: 6,400 mm Working area Y: 1,500 mm Number of milling spindles: 1 Main motor: 13 kW Maximum rotation speed: 24,000 rpm Tool clamping system: HSK-F63 Tool change positions: 8 Vertical drilling heads: 20 Hjdpfxswlcqvs Ahnjfi Horizontal drilling units X: 4 Horizontal drilling units Y: 4 2 vacuum pumps, each 360 m³/h Nesting Remote control Software: BIESSE WORKS Overall dimensions: 11,004 × 5,334 mm Weight: 4,900 kg

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints Hfjdpsiidm Nefx Ahnei - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: new, Total height 1500 mm Total length 3000 mm 5 pneumatic cylinders Compressed air pressure 8 bar Hjdpfx Aedpbn Aehnefi Travel of pneumatic cylinders 100 mm Diameter of pneumatic cylinders 100 mm

Condition: used, Year of construction: 2017, machine/vehicle number: 1000025340, functionality: fully functional, travel distance X-axis: 6,735 mm, travel distance Y-axis: 1,650 mm, travel distance Z-axis: 245,290 mm, workpiece height (max.): 60 mm, controller manufacturer: Biesse BH 660, bSolid, bEdge, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 85 m/min, rapid traverse Y-axis: 85 m/min, Assembly of the the machine could be done by our subcontractor on the agreed price. Hfjdpfsycvcxjx Ahnji

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Working area X: 3280 mm Working area Y: 1620 mm Hjdpjy Ukv Sjfx Ahnjfi 5-axis electro-spindle, power 11 kW Drilling heads for vertical drilling: 10 Drilling heads for horizontal drilling X: 4 Drilling heads for horizontal drilling Y: 2 1 grooving blade in the X direction Linear tool changer with 12 positions Work table with 6 stops Software: bSolid Control panel BUSCH vacuum pump, 245 m3/h Safety mats Protective screens Approximate weight: 3400 kg. Electro-spindle used for only 8 hours, condition like new.

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements Hfedpfxsw Nafke Ahnoi - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Condition: new, Year of construction: 2025, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, pressing force: 2 t, stroke length: 100 mm, total length: 4,120 mm, total width: 2,300 mm, total height: 2,650 mm, overall weight: 2,000 kg, working width: 2,000 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 3,000 mm, feed length Z-axis: 180 mm, height adjustment type: mechanical, pressure plate depth: 120 mm, warranty duration: 12 months, working height: 180 mm, Double Hydraulic Frame Press – Industrial Solution for Precise and Efficient Assembly Designed for demanding production environments, this double hydraulic frame press delivers high levels of adaptability and structural integrity, making it ideal for assembling wooden frames – from windows and doors to custom furniture components of various shapes and sizes. Maximum Flexibility for a Wide Range of Applications Thanks to its intelligent engineering and adjustable clamping systems, the press quickly adapts to frames of different thicknesses and geometries without requiring complex setups or manual intervention. Changeovers between workpieces are fast and effortless, significantly increasing production efficiency. Industrial-Grade Construction for Heavy-Duty Use The press frame is built from high-quality structural steel, engineered for enhanced rigidity and operational stability under heavy loads. The side beams are machined from a single solid piece, eliminating potential weak points caused by joints or welds. Strategically placed reinforcements minimize torsional deformation during pressing, ensuring the precise alignment and perpendicularity of all frame components. This robust design not only enhances operational safety but also extends the lifespan of the equipment, even under continuous industrial use. Efficient Hydraulic Pressing with Accurate Force Control The system integrates 10 high-efficiency hydraulic cylinders (6 vertical, 4 horizontal) that apply uniform and controlled pressure across the entire surface of the frame. This ensures consistent joint compression and even adhesive distribution, eliminating gaps or weak spots. Additionally, three frontal pressing systems guarantee correct contact between the workpiece and the pressing tables, optimizing positioning prior to clamping. Modular pressing pistons with quick-lock mechanisms can be easily repositioned to suit the size and shape of the frame, enabling targeted pressure exactly where needed. This is especially beneficial for complex geometries or structurally sensitive zones. Simplified Operation via Fully Automated Hydraulic System Equipped with a high-capacity hydraulic pump, the press operates autonomously without requiring external pressure sources. Pressing functions and pressure adjustments are activated via intuitive electric controls, eliminating physical strain on the operator. Each work zone is equipped with an independent foot pedal, allowing localized operation for increased flexibility. The hydraulic pump is designed to maintain stable and consistent pressure throughout the pressing cycle, ensuring uniform results from start to finish. Engineered for High-Performance Industrial Production This double frame press excels through: large-scale processing capacity, adaptability to various frame types and materials, efficient and reliable operation. Hfedpfxewgybue Ahnji It is the perfect solution for companies operating in heavy-duty production environments, providing a genuine competitive edge in assembly operations, both in terms of speed and precision. Technical support available in english - romanian - german.

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Y axis working area: 1650 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Hodpfx Ahowuz Eksnjfi Total number of drilling spindles: 16 Total number of tool changer positions: 16

Condition: used, Year of construction: 2024, New display machine! List price: €32,665,- complete in standard configuration with: Sturdy, torsion-resistant steel frame constructed with welded and bolted assemblies. Louvered top press beam with 6 elements; louvered side press beam with 5 elements. Louvered press beams feature the proven Ganner system tolerance compensation for tightly pressed carcass joints. Counterpressure surfaces (side pressure wall and bottom) are 38 mm thick, coated, continuous support plates. Continuous pressing surface with a height of 95 mm at the lower vertical press beam. Electromotive adjustment of both press beams via precision trapezoidal threaded spindles (with increased pitch and running accuracy) and high-performance running nuts with grease reservoir. Pressing is performed electromechanically via two separate worm gear motors (2 x 0.75 kW). The pressing force of the press beams is continuously adjustable via 2 potentiometers and controlled electronically by frequency converters, ensuring absolutely wear-free force control. Pressing force for the horizontal press beam: min. 500 daN (kg), steplessly adjustable up to max. 2200 daN (kg). Pressing force for the vertical press beam: min. 300 daN (kg), steplessly adjustable up to max. 2200 daN (kg). Pressing and adjustment speed of the press beams with fine positioning, selectable via three-position rotary switch: 5 / 10 / 25 mm/second. Very simple operation using 6 separate push buttons; 8 movement sequences selectable via control system. Freely adjustable pressing time preselection with automatic opening from 0–30 min (switchable to seconds or hours). Working height/feed height: 300 mm. Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm. Weight: approx. 1800 kg net. Dimensions (Length x Width x Height): 3.45 m x 0.95 m x 2.30 m. Electrical connection: 400V, 3Ph, 50Hz (3.2 kVA, 16A). Additional equipment: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams. Pressing speeds of 5 / 10 / 25 mm/sec and rapid traverse speed of 50 mm/sec; sensors can be deactivated for pressing special components. 1 set of machine feet (working height 500 mm). Hedpjuf Hx Hofx Ahnsfi Storage location:

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Frame press T2 RP Hfsdju Rp Eijpfx Ahnei Year of manufacture: 1986, 2.2 kW Electro-hydraulic 3 vertical and 2 horizontal press cylinders Pressing pressure adjustable 0 – 2000 kg Pressing dimensions: 2500 x 3000 mm Required space: 4000 x 950 x 2600 mm Transport available at extra cost! Due to the age of this used machine, warranty is excluded when selling to commercial customers.