COMIL CF 2000 ELECTRONIC

Comil CF 2000 ELECTRONIC

Condition: good (used), cutting height (max.): 200 mm, chain width: 400 mm, input voltage: 380 V, height adjustment type: electric, rotational speed (max.): 3,400 rpm, power: 37 kW (50.31 HP), MAX cutting depth: 200 mm Chain width: 400 mm MAX distance between exterior blades: 380 mm Blades diameter (min/max): 250 / 350 mm Adjustable feeding speed (inverter): 5 – 30 mt/min MIN workpieces lenght: 1000 mm Blade holder diameter: 70 mm Spindle shaft speed: 3.400 RPM Iedpfjtvpfmsx Ag Dja Main motors power: 2 x 37 kW

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Fully working UniControl 12 year 2006 from Norway - for exact technical specification please open attached document in PDF below. Cross section UniTec 12: - saw unit - edge round cutter from bottom - Hubspindel no.1 - Hubspindel no.2 - Hubspindel no.3 Long , profile section UniVar 12: - Profil cutter - Profil cutter - Profil cutter horizontal - Profil cutter - Profil cutter - Profil cutter Total el power 114 kw 400 V AC Need for suction 270 m3/min Need of compressed air 1000 L/ minMachine was in use until 15.08.2023 Payment: Prior to loading Delivery: ex. factory Rendalen - Norway Machine is located in Norway ( near to Trondheim) The machine is now disconnected, stored in dry and warm wearhouse, and are ready to be shipped. Rekman Maskin & Service - service of woodworking machines since 1986. Iedpomgc I Nsfx Ag Dsa

Condition: like new (used), Year of construction: 2017, Technical data: Working length: 1270 mm Distance between the columns: 1000 mm Pressing force: 60 to CNC control: CYBELEC ModEva Controlled axes: Y1 / Y2; X; R Number of stop fingers 2 pcs. Stroke: 275 mm Motor power: 7.5 kW Working height: 920 mm Light barrier: FIESSLER CE mark Dimensions (length x width x height): approx. 3250 x 2500 x 2600 mm Weight: approx. 4.5 tons Iodpjvxincofx Ag Dsa Accessories: 1 set of tools Condition: as good as new, very little used Machine comes from a vocational school

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm Ijdot R T Hcopfx Ag Dja 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Year of construction: 2022, condition: new, functionality: fully functional, Lauber wood dryer longitudinal ventilation Chamber with stacking trolley Net volume 7.2 m3 with wood temperature measuring point -> new / unused / original packaging -> available immediately (standard delivery time approx. 3/4 year) -> see detailed description in the photos -> collection, loading, etc. by buyer Isdpfx Aomidtrsg Dea -> transportation, customs clearance and insurance by buyer

Condition: excellent (used), Year of construction: 2018, operating hours: 1,020 h, functionality: fully functional, For sale: Nesting machine from Holzher with very few operating hours and top equipment! Manufacturer: Holz-Her Model: Nextec 7707 Year of manufacture: 2018 Weight: 4980 kg Iedpfowtiq Sjx Ag Dsa Operating hours: 1020 Processing length X: 3100 mm Processing length Y: 2200 mm Vector speed: 110 m/min Equipment: Milling unit: 12 kW, air-cooled, 1000–24000 rpm Drilling unit (XL drilling head): 24 spindles (18 vertical, 6 horizontal) including saw unit in X-direction (grooving in X-direction) Angle gear: e.g. Lamello P-System Workpiece support: High-Flow nesting table with continuous vacuum area, 16-zone vacuum controlled by software Safety device: light barrier Workpiece clamping: 2 × 140 m³/h vacuum pumps, low-maintenance dry-running, additional 250 m³/h dry-running vacuum pump Tool changer: 10-position pick-up changer integrated in the machine frame, 1-position X/Y pick-up changer with tool cover NEXTEC module: CabinetSelect DirectCut: line laser in X/Y-direction, incl. software Software: CAMPUS software machine license included, aCADemy CAD/CAM module and CabinetControl Base, “Warehouse” software module, Production software module, BetterNest free-form nesting

Condition: excellent (used), Planer 9 heads Working width - 20 cm Working height - 22 cm 5 pulleys in the table Heads 1 bottom 7.5 kW 2 right 11 kW 3 left 11 kW 4 right 11 kW 5 up to 11 kW 6 down 11 kW 7 up to 11 kW 8 down 11 kW 9 universal 11 kW Iodpetrdwtofx Ag Dsa PERFECT CONDITION!

Condition: used, Year of construction: 2019, Used machine Year of construction: 2019 Equipment and technical data: - Designed for classic nesting processing with wear plate - Machine frame in welded construction with ground and hardened prism guides for the gantry, unit head, and consoles - Gantry design traveling column - Helical rack and pinion drive in X and Y directions; ball screw drive in Z direction for precise positioning - Processing dimensions: - Max. support area on nesting table: X = 3100 mm Y = 1560 mm - Max. traverse paths: X = 4695 mm Y = 2100 mm Z = 293 mm - Max. clearance height over DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed: Vector speed: 128 m/min X = 80 m/min Y = 100 m/min Z = 25 m/min - DYNESTIC table: - Fixed, continuous processing table with grid layout - Continuous grooves in X and Y direction - Groove spacing: 50 mm - Includes 25 meters sealing cord for clamping the wear plate - Vacuum zones: single-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - U-shaped arrangement - 5+4 in X and 4 in Y direction - 32 mm grid - Max. drill diameter: 35 mm - Total drill length: 70 mm from mounting end (depends on panel thickness) - Spindle stroke: 70 mm - Rotation direction: clockwise/counter-clockwise alternately - n(max): 1000 - 4400 rpm infinitely variable - Holder: M10 thread – 11 mm fit - Without tools and holders - 6 horizontal spindles: - 2 double drilling spindles in X direction - 1 double drilling spindle in Y direction - Holder: M10 thread, 11 mm fit - Max. total drill length: 63 mm from mounting end - Without tools and holders - Milling unit 7842: - Power: 12.0 kW (S6) - n(max) = 1000 - 24000 rpm infinitely variable - Max. power at 12000 to 24000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand rotating tools) - With collet chuck with HSK shank - Ceramic ball bearings (hybrid bearings) - Max. tool weight: 6 kg (including holder) - Tools: milling and grinding tools max. Ø 160 mm - Safety guard according to CE standard - Safety fencing at sides and rear - Vacuum pump: 500 m³/h, dry-running - Personnel safety via light barriers in the front machine area - Handheld control unit for remote operation with the following functions: - Start/Stop machining program - Speed control for machining cycles - Reset button - Manual feed/rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software 1x machine license comprising: - CAMPUS NC-HOPS: - Graphic variant system with dialog programming and CAD/CAM functions for creating part variants with macro technique - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals Iedpswkbbdefx Ag Dja - Additional dust protection by overpressure in each guide carriage - Simultaneous lubrication for all linear ... (text evidently continues)

Condition: good (used), Year of construction: 2008, functionality: fully functional, We offer for sale: WEEKE (Homag Drilling Systems) – OPTIMAT BHC 200 – High-Precision CNC Machining Center Technical data: • Year of manufacture: 2008 GUIDE SYSTEM AND DRIVE TECHNOLOGY • Dust-protected linear guide system • Rack-and-pinion drive in X-axis; ball screw drive in Y- and Z-axes • Axis travel: - Y = 1822 mm - Z1 = 300 mm - Z2 = 185 mm • Worktable: Ijdpfx Aewx Iidjg Dja - X = 5250 mm (length) - Y = 1250 mm (width) - Z = 100 mm (thickness) (Optimat BHC200) • Control system: HOMAG PowerControl/woodWOP • Equipment: o Automatic tool changer o Multi-spindle drilling head o Integrated vacuum table for secure clamping o Suitable for machining wood, plastics, and light metals • Condition: Good; very well maintained, serviced regularly / last service 03/25 • 10/2022 – Machine upgrades: - New industrial PC (Siemens Industrial PC) - woodWOP 8 / Windows 10 update Advantages of the HOMAG BHC200: • Precise and efficient machining of a wide range of materials • Ideal for joineries, furniture manufacturers, and custom productions • Reliable performance even for demanding projects Scope of delivery: • Machine + industrial PC • Operating manual • CE SAFETY AND PROTECTION DEVICES - Side and rear safety fencing - Three-segment safety tread mat in the front area allows loading of workpieces in the non-active working zone Inspection and test run on site are welcome! Dismantling and transportation are to be arranged by the buyer.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, working width: 230 mm, spindle diameter: 40 mm, working height: 120 mm, number of spindles: 6, Four-side planer and moulder Manufactured by Weinig Type: Hydromat 23C Year of manufacture: 2005 Working width: 230 mm Working height: 120 mm 6 spindles Spindle arrangement: bottom/right/left/top/top/bottom Spindle motors: 7.5 kW each Automatic table lubrication Automatic Memory System control system Ijdpfx Asv T R A Djg Dja Spindle diameter: 40 mm Spindles with bearings on both sides The last two heads are equipped with jointers