Injection molding machine

ARBURG Allrounder 370S-500-100

Condition: new, Please read the technical specifications in full. If you are considering this machine as an investment, we kindly request your complete credentials, including a correct telephone number and email address, in order to submit an offer. Fiber Laser 30W Marking area: 200 x 200 mm Maximum workpiece size (WxHxD): 550 x 450 x 350 mm Laser type: Fiber 30 Watt Pjdpfx Ageru E Svjxegp Wavelength: 1064 nm Maximum marking speed: 7000 mm/sec Z-axis motorized H: 700 mm Repeatability/lens: +/- 0.001 mm Minimum line thickness: approx. 0.01 mm Power supply: 240 V / 50 Hz External dimensions: 110 x 80 x 200 cm Front door: manual Including software and PC Can be demonstrated under power on-site Price net, plus VAT

Condition: good (used), Year of construction: 2015, Used thermocontainer; however, in exceptionally good condition, ready for immediate use Type designation: C-780ü (Various thermocontainers in stock, with capacities from 580 liters to 1170 liters, see additional photos) Technical data Interior: 610 x 810 x 1570 mm Exterior: 735 x 955 x 1900 mm Weight: approx. 98 kg Capacity in liters: approx. 780 With sliding rails for the grating Features Podod Syg Sopfx Agxjgp Locking mechanism in the center of the door 2 lateral handles 1 folding handle in the door recess Rolling chassis with 108 mm rollers, PA, suitable for cold storage Door latch Inner tub with sliding rails Angled corner supports with edging PE sheets (2 mm thickness), light blue Profiled deflector plates (3-sided) 2 fixed wheels, 2 swivel wheels, can be locked with a padlock Load capacity up to approx. 400 kg RECONDITIONED Final cleaning must be carried out by the buyer The offer includes one container Color may vary depending on stock availability Approx. 100 units in stock We offer the possibility of inspecting the item on Tuesdays and Thursdays between 9 am and 4 pm, by prior telephone appointment. If required, the item can be taken away immediately. Unless explicitly stated otherwise, this offer refers to used goods. The items have been visually inspected and are technically sound. Shelves and cooling plates are not included in the offer. However, these are also available from us. Due to time constraints, we can only provide answers regarding this item if you include a telephone number in your request. Price is stated net per piece, plus the currently applicable VAT. All offers are ex warehouse 47441 Moers. If you would like the item to be shipped, please contact us to discuss packaging and shipping costs. (Photos are similar, as we do not depict each individual item)

Condition: excellent (used), Year of construction: 1999, Clamping force: 25 tons Pedpfx Agovl Skgsxjgp Distance between tie bars: 270x270 mm Opening max: 275mm Min Mould height: 200 mm Mold platens size: 400 x 400 mm Screw diameter: 18 mm Injection volume: 20 cm3 Shot weight: 17 g Injection pressure: 2500 bar Working hours: 38.035 h

Condition: good (used), Sturdy crane system, ideal for glass storage or workshop, Load capacity: 3t, Length: 14250 mm, width: 8500 mm, height: 3650 mm Pjdporyv S Ajfx Agxogp Max. hook height: 3280 mm, Max. Overall height: 3950 mm.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 010/Q, For sale is a paper bag making machine manufactured by the company GAPS from Italy. Web width: 670–1670 mm Roll diameter: 1200 mm Core diameter: 76 mm Paper weight: 90–140 g/m² Bag width: 240–540 mm Cut-off length with handles: 380–670 mm Gusset: 90–270 mm Handle height: 100 mm Handle width: 16 mm Patch length: 160 mm Pedpfxjww T Nae Agxegp Patch height: 52 mm Patch roll diameter: 1200 mm Patch roll width: 100 mm Patch roll basis weight: 80–100 g/m² Maximum production speed: 120 cycles Connected load: 30 kW Weight: 24,500 kg Machine dimensions: 16,500 × 3,500 × 2,800 mm

Year of construction: 2009, condition: ready for operation (used), Two injection molding machines are offered, year of manufacture 2008 and 2009. Clamping force: 500kN, tie bar spacing X/Y: 320mm/320mm, mold mounting plates X/Y: 446mm/446mm, opening stroke: 350mm, max. platen distance: 550mm, injection unit 170: screw diameter: 25mm-30mm, shot volume: approx. 59ccm/25mm screw, approx. 85ccm/30mm screw, shot weight: approx. 62g to 77g, injection pressure: up to 2500bar. Inspection is possible by arrangement. Psdpfxex I Rqce Agxogp

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036936, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 1,837 bar, injection weight: 123 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,820 mm, overall weight: 5,900 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 470 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (order 38670013) (machine no.: 61036936, new, year of manufacture 2023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT Pgsdpfx Aeuggb Djgxep  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 35 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticizing flow (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heat output kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package  Swivel device Injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: good (used), Year of construction: 2008, Ref. no.: 18643 Manufacturer: ARBURG Type: 470 C 1500-400 Golden Editions Year of construction: 2008 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 470 x 470 mm Mould height min.: 250 mm Opening width: 750 mm Injection unit Screw diameter: 35 mm Injection volume: 154 cm³ Shot weight: 141 g Injection pressure: 2500 bar Measurements and weight Dimensions: 4,6 x 1,6 x 2,1 m Machine weight: 4850 kg Additional information & extras Core pull: 1 pcs Pgodjxvy Rlspfx Agxsp Further information: Communication card for ProSeS interface is available (OPC-UA). Robot interface is available (EUROMAP 67). he Golden Edition is a special version of the well-established ALLROUNDER C series, known for its optimized hydraulic performance, stable production process, and high reliability. The machine has a clamping force of 150 tons and is ideally suited for the production of technical plastic parts as well as applications requiring high quality standards. Key advantages of this series include: * Robust and durable construction * High process stability and repeatability * Reliable ARBURG control system * Good availability of spare parts * Suitable for continuous industrial operation The Golden Edition version also stands out with its enhanced performance and excellent price-performance ratio in the used machinery market. Thanks to its versatility, this machine is widely used in industries such as automotive supply, technical plastic parts, and serial production.

Year of construction: 2024, condition: used, Working Width: 1350 mm Maximum Speed: 400 m/min Maximum Unwinder Roll Diameter: 1300 mm Unwinder Core Diameter: 76 mm Maximum Rewinder Roll Diameter: 1300 mm Rewinder Core Diameter: 76 mm Minimum Slitting Width: 25 mm Maximum Number of Knives: 30 Processed Material: Paper Material Weight: 50 – 200 g/m² Main Drive Motor: AC 3-phase motor – 30 kW Electrical Requirement: 400 V, 50/60 Hz, 3 Phase Electrical Power: 35 kVA Compressed Air Requirement: 6 – 7 bar Air Consumption: 200 NL/min Machine Configuration Unwinding Section • Unwinding station for rolls up to Ø 1300 mm • Pneumatic expanding shaft for 76 mm core • Pneumatic brake with measuring roller for web tension control • Hydraulic lift-in system for mother rolls • Motorized lateral adjustment of unwind stand Slitting Section • Knife system with 25 top knives and bottom knives • Knife positioning adjustable without spacers Rewinding Section • Rewinding station for rolls up to Ø 1300 mm • Pneumatic expanding shaft for 76 mm core Psdpfjyt I A Eex Agxogp • Pneumatic nip roller • Hydraulic unloading of finished rolls • Safety guards with light barrier Control System PLC: Siemens SIMATIC DP ET 200 SP / CPU 1500 Operator Interface: Touch Panel 700 Comfort • Failure message display • Multi-language interface (DE / EN / FR / ES / RU) • Web tension control • Speed limitation adjustment • Meter counter • Hour counter • Pre-set meter counter with stop function • Diameter pre-setting with stop function • Speed control • Ethernet modem for remote diagnostics and maintenance

Condition: ready for operation (used), Year of construction: 2020, clamping force: 2,200 kN, screw diameter: 70 mm, injection weight: 172 g, This Arburg 570 S 2200-800/290 was manufactured in 2020. It features a hydraulic drive system and the Selogica control system for precise operations. With a clamping force of 2,200 kN and a screw diameter of 40 mm, it is ideal for detailed injection moulding tasks. Consider the opportunity to buy this Arburg 570 S 2200-800/290 hydraulic injection moulding machine. Contact us for more information. Clamping unit • Distance between tie bars: 570 × 570 mm • Opening stroke: 650 mm • Ejector force: 70 kN • Ejector stroke: 200 mmInjection unit • Injection unit size: 290 • Injection pressure: 2,500 bar Pgjdpfxox Nkp Is Agxjp • Shot volume: 188 cm³Drive & control • Drive system: Hydraulic • Control system: ARBURG Selogica