Arburg 570 S 2200-800/290

Arburg 570 S 2200-800/290

Year of construction: 2002, condition: excellent (used), 10-2 bar, year of manufacture 2002 Gsdsykyqiepfx Ag Iobt

Condition: used, Year of construction: 2012, functionality: fully functional, Fully refurbished, 12 months warranty -Unit on base frame -Maximum temperature: 1300 °C -Oven chamber volume: 120 liters -Oven chamber: 500 x 500 x 500 mm (W x D x H) -Control cabinet separate -Eurotherm 3504 Gedpsyn Emqefx Ag Isbt -Parallel swing door for opening in the hot state -Slot in the oven collar, bottom right (for retrofitting CO2 and N2 gas supply in a gas supply box, not included!) -Power: 15 kW -Connection: 400V 3/N/PE 50 Hz -Weight: 410 kg -Documentation, CE declaration Oven, furnaces, industrial oven, muffle furnace, heat treatment oven, chamber furnace

Condition: excellent (used), Year of construction: 2022, operating hours: 4,605 h, functionality: fully functional, Controller: FANUC 31i-B5 Max. turning diameter: ø540 mm Max. turning length: 1.020 mm Spindle bore / bar capacity: ø76 / 65 mm Y-axis travel: 170 mm (±85) Milling spindle: 12.000 rpm, 18.5 kW Tool magazine (ATC): 80 stations, Capto C6 Tool change time: 2.0 s Counter spindle: 5.000 rpm, 22 kW Spindle power: 22 / 18.5 kW (S1/S6) Gbsdszilupopfx Ag Iot

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 Retort Heat Treatment Furnace - Like new: hardly used - Documentation available (both electronic and physical) - Pallet with spare parts included TECHNICAL DATA System type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C in a vacuum Control stability: ± 2 K Temperature homogeneity: ± 6 K in the range of 600 °C to 1150 °C at the end of the stabilization period Control voltage: 230 VAC / 24 VDC Furnace working space: 360 x 400 mm Load: ≤ 50 kg Gbedpfx Agsiryyao Ist Heating: Three-zone Pressure: ≤ 350 mbar Final vacuum pressure in the cold state: < 5 * 10-5 mbar in a clean, dry furnace Installation area: 900 x 1900 x 3000 mm Total system weight approx.: 1500 kg Sound pressure level: < 70 dB We assume no liability for the accuracy, completeness, and currency of the information provided.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,000 h, clamping force: 500 kN, screw diameter: 25 mm, injection weight: 46 g, total height: 1,779 mm, overall weight: 4,200 kg, This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine. Additional equipment • Granule Dryer • Handling System • Conveyor Belt - 1400 mm x 400 mm • Precision Scale • Temperature Units - 2x HB‑Therm Machine Benefits Technical Machine Benefits • Exceptional energy efficiency • Enhanced platen rigidity and mold safety Gedpex D Eccsfx Ag Ijbt • Fully electric direct-drive system • Ultra-precise direct-drive motors with 0. 1 ms response time • Displacement: 52 cm³ • Spray pressure: 2180 bar • Tool clamping platens: 520 x 570 mm Extra Information Control Unit Advanced control system with NC5+ Automatic mold height and clamping force adjustment Energy-saving routines Dimensions Machine Depth 4308 mm

Condition: good (used), Year of construction: 2015, Used thermocontainer; however, in exceptionally good condition, ready for immediate use Type designation: C-780ü (Various thermocontainers in stock, with capacities from 580 liters to 1170 liters, see additional photos) Technical data Interior: 610 x 810 x 1570 mm Exterior: 735 x 955 x 1900 mm Weight: approx. 98 kg Capacity in liters: approx. 780 With sliding rails for the grating Features Locking mechanism in the center of the door 2 lateral handles 1 folding handle in the door recess Rolling chassis with 108 mm rollers, PA, suitable for cold storage Door latch Inner tub with sliding rails Angled corner supports with edging PE sheets (2 mm thickness), light blue Profiled deflector plates (3-sided) 2 fixed wheels, 2 swivel wheels, can be locked with a padlock Load capacity up to approx. 400 kg Gjdpfod Syg Sjx Ag Iebt RECONDITIONED Final cleaning must be carried out by the buyer The offer includes one container Color may vary depending on stock availability Approx. 100 units in stock We offer the possibility of inspecting the item on Tuesdays and Thursdays between 9 am and 4 pm, by prior telephone appointment. If required, the item can be taken away immediately. Unless explicitly stated otherwise, this offer refers to used goods. The items have been visually inspected and are technically sound. Shelves and cooling plates are not included in the offer. However, these are also available from us. Due to time constraints, we can only provide answers regarding this item if you include a telephone number in your request. Price is stated net per piece, plus the currently applicable VAT. All offers are ex warehouse 47441 Moers. If you would like the item to be shipped, please contact us to discuss packaging and shipping costs. (Photos are similar, as we do not depict each individual item)

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036721, clamping force: 6,500 kN, screw diameter: 70 mm, clearance between the columns: 1,110 mm, displacement volume: 1,078 cm³, injection pressure: 1,877 bar, injection weight: 981 g, opening stroke: 3,200 mm, plate height: 1,540 mm, drive type: Hydraulisch, clear span: 3,200 mm, tool weight: 2,200,000 g, Injection Moulding Machines Directly from the Manufacturer! Gbedpfx Ajw U N Ixog Iot As the manufacturer KraussMaffei, we offer you our certified and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX sliding shoe, forces are ideally absorbed and the service life of the moulds is extended. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24'' TFT color screen with multitouch functions CLAMPING UNIT - Clamping force: 6500 kN - Max. mould opening force: 455 kN - Daylight opening (h x v): 1110 x 960 mm - Platen size (h x v): 1540 x 1440 mm - Mould installation height min. - max.: 1550 mm (without centre platen) - Opening stroke: 3200 mm - Max. mould opening distance: 1650 mm - Max. mould weight: 22,000 kg INJECTION UNIT 1 SP2000 - Screw diameter / type: 60 mm / thermoplastics - Effective L/D ratio: 23.3 - Injection pressure: 2420 bar - Shot volume: 792 cm³ - Shot weight at max. stroke for PS: 720 g - Injection speed: 140 mm/s - Injection throughput: 396 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 72.2 g/s - Nozzle contact force: 82 kN INJECTION UNIT 2 SP2000 - Screw diameter / type: 70 mm / thermoplastics - Effective L/D ratio: 20 - Injection pressure: 1877 bar - Shot volume: 1078 cm³ - Shot weight at max. stroke for PS: 981 g - Injection speed: 140 mm/s - Injection throughput: 539 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 98.3 g/s - Nozzle contact force: 82 kN ELECTRICAL PARAMETERS - Connected load: 341 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral conductor WEIGHT & DIMENSIONS - Net weight: 43.5 t - L x W x H: 11.89 x 3.22 x 2.77 m ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) - Mould heating: 96 zones (3.5 kW each) - Euromap interface for handling: E18 - Euromap central computer interfaces: E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical centre platen - Parallel clamping & opening during injection process with bar parallelism control between FWAP and centre platen or BWAP and centre platen - ColorForm interface signal interface for connecting an RPM unit - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 205 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 2.2 [kW] - C axis indexing precision : 1 [°] - Number of guide bush holders : 1 GUIDE BUSH HOLDER 1 - Number of positions : 10 - Number of motorized positions : 4 END ATTACHMENT - Number of positions : 7 SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 7 [kW] WEIGHT & DIMENSIONS Gbjdpfx Asy Dim Ijg Ist - Machine floor space : 2200 x 1200 [mm] - Machine height : 1700 [mm] - Machine weight : 2200 [kg] MACHINE HOURS - Number of hours under power : 107555 [h] - Number of working hours : 91025 [h] - Number of spindle hours : 54783 [h] EQUIPMENT - CNC : Fanuc 300is-model A - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Coolant tank

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 4,500 rpm, travel distance X-axis: 205 mm, travel distance Y-axis: 30 mm, travel distance Z-axis: 340 mm, spindle motor power: 15,000 W, total height: 1,693 mm, total width: 1,595 mm, controller manufacturer: FANUC, controller model: 0i-F Plus, product length (max.): 2,350 mm, number of axes: 4, This 4-axis DN SOLUTIONS LYNX 2100MB was manufactured in 2022. As new, showroom model. It features a maximum spindle speed of 4,500 RPM and a possible chuck size of up to 8" (204 mm). The machine is equipped with a tool turret with 12 stations and a bar capacity of 65 mm. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS LYNX 2100MB horizontal turning machine we have for sale. Contact us for further details. • As new, showroom model • Chuck size possible : 8" (204) No chuck included • Bar capacity: 65 mm • Y travel: 30 / 36 mm • Turret stations: 12 • Turret interface: BMT 45 • Guideway type: Linear guideway • Cooling system: Coolant pump 7 bar • Design: High-performance compact turning center with a space-saving design • Productivity: Fast idle times; tool turret with BMT interface • Application: Suited for producing small parts with high precision Additional equipment Gjdoyrt E Nopfx Ag Ijbt • Bar feeder interface • Chip conveyor • Parts catcher • Tool setter (electric) • Oil skimmer • 3-color signal light • Optional: Chip conveyor (hinge belt conveyor). Price on request • Machine is supplied with a standard basic package: turret fully equipped, base holder included.Optional: • 2 pcs. External turning tool holder BMT45 20x20 single (500-0665) • 1 pc. Facing tool holder BMT45 20x20 left/right (500-0668) • 1 pc. External turning tool holder BMT45 20x20 double left (500-0675) • 1 pc. Parting tool holder BMT45 20x20 single (500-0671) • 2 pcs. Internal turning tool holder BMT45 Ø32 single left (500-0680) • 1 pc. Internal turning tool holder BMT45 Ø20 triple (500-0678) • 1 pc. Cover IK (500-0642) • 1 pc. Reducing sleeve set Boring • 1 pc. Reducing sleeve set Boring • 1 pc. Reducing sleeve set U Drill • 1 pc. Reducing sleeve set OD 32 ID 20/25 (500-0710) • 1 pc. PRECI-FLEX adapter set PRECI-FLEX ER20 (BMT 45P) (500-0524) • 2 angled externally cooled Eppinger AGWs • 2 straight externally cooled Eppinger AGWs Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), Year of construction: 2022, Turning diameter 376mm, turning length 760mm, bar capacity 76mm, Y axis -/+ 52.5mm, C axis 0.001 degrees on both spindles, Gbjdpfx Aszt Spnog Iet 24 station turret, 22KW Motor, Main spindle 4000rpm, sub-spindle 4500rpm, Fanuc I series, 3 jaw chucks, swarf conveyor, tool setter, LNS barfeed unit.