Engel E-VICTORY 170H/50V/120 combi (2015) ecodrive , VIPER 20 LINEAR ROBOT

Engel E-Victory 170H/50V/120 combi

Condition: ready for operation (used), Year of manufacture: 2009 Bdedswvf Avspfx Ac Tsg No power take-off (PTO) Air conditioning Front linkage, tipping body at the front and rear, hydraulics, all-wheel drive, hydrostatic drive, ready for use. Optical defects, see pictures. Preferably sold to dealers or for export. Errors and omissions excepted. Pictures/description may vary.

Condition: used, Year of construction: 2007, operating hours: 8,570 h, Equipment: all wheel drive, Liebherr Wheel Loader L 538 2 plus 1 VIN: VATZ0433 HZB019019 - No particulate filter - no exhaust gas treatment - no Adblue, etc. Year of manufacture: 2007 Operating hours: approx. 8350 Liebherr 4-cylinder in-line engine, water-cooled with turbocharging and intercooling, 142 hp Hydrostatic drive with 3 driving ranges: Speed range 1: 0-6.0 km/h, Speed range A1-2: 0-16.0 km/h, Speed range A1-3: 0-34.0 (40) km/h Machine width: 2500 mm, Height: 3.28 meters, Length: approx. 7000 mm * 3rd hydraulic control circuit (for silage block cutter, high-dump bucket, etc.) * Air conditioning * Fuel pre-filter * Driver's seat with pneumatic suspension * Ride dampener * Radio (function not tested) * Adjustable steering column * 2 work lights on the rear roof of the cab, LED * 4 work lights on the front roof of the cab Road approval - 40 km/h - possible "Load-Sensing" axial piston variable displacement pump Permissible total weight: 16000 kg Brakes: Self-locking of the hydrostatic drive, acting on all 4 wheels, and additionally a hydraulic pump accumulator brake system with wet disc brakes located in the differential housing (two separate brake circuits) Machine width: 2500 mm Tires: 20.5 x 25 VA L3 - 50% Tires: 20.5 x 25 HA L3 - 50% Available at extra cost: Bjdpfozmprysx Ac Tjdg * Quick coupler system Liebherr with hydraulic preparation: EUR 3,550.00 * 4-in-1 bucket (grapple-planer bucket) 2 cubic meters: EUR 3,950.00 * Volume bucket 3.5 cubic meters: EUR 3,990.00 * Bucket with retaining arm from 2.0 cubic meters to 3.5 cubic meters: EUR 3,660.00 * High-dump bucket from 2.5 to 5.0 cubic meters: from EUR 5,990.00 * Pallet fork 5 tons: from EUR 1,850.00 Also available with a used scale! Pfreundt WK 50 at a price of EUR 3,900.00 * All prices are net plus VAT or for export Sales only to commercial businesses or for export. Sale in "as is" condition. No guarantee or warranty. The stated mileage or operating hours are taken from the odometer or hour meter; we do not guarantee the accuracy of these figures. Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided is not to be regarded as guaranteed characteristics. The description and the information contained therein serve only for the general identification of the vehicle and do not constitute a warranty in the legal sense. The information does not claim to be complete. The information/descriptions and images are non-binding and do not constitute guaranteed characteristics. Only the specifications in the order confirmation and invoice apply. The seller assumes no liability/warranty. The advertisement may contain typographical and data transmission errors. The seller has not inspected the machine. Equipment should be checked separately. We will also accept your vehicle in part exchange. We are available to answer any further questions you may have. For our customers from abroad, we will prepare all customs and export documents for a smooth transfer abroad.

Year of construction: 2014, condition: ready for operation (used), Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20. Bodpfxsh Nypfo Ac Tsdg

Condition: good (used), functionality: fully functional, first registration: 07/2015, fuel type: diesel, overall weight: 7,500 kg, tire condition: 75 %, axle configuration: 4x2, fuel: diesel, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 8,650 mm, total width: 2,500 mm, total height: 3,500 mm, Year of construction: 2015, Equipment: ABS, central locking, crane, fog lights, onboard computer, === MAIN SPECIFICATIONS === Year: 2015 Hours: 5510 h Working height: 30 m Max. horizontal outreach: 19.5 m Platform capacity: 350 kg Truck type: MAN Number of axles: 2 Truck drive: 4x2 Transmission: Manual Cabin: Single Engine power: — Fuel type: Diesel Platform dimensions (L x W): 1.6 m working cage Platform rotation: Yes (80° + 80°) Boom type: Telescopic / articulated combination Stabilisers: Yes – hydraulic outriggers CE certification: Yes Total vehicle weight: 7,500 kg Bjdpoyr Nkzsfx Ac Tjdg === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certification and full documentation included Ready for immediate transport and operation Extensive technical documentation available === CONDITION === Excellent working condition – fully inspected, serviced and tested by certified professionals. Inspection possible upon request. === LOCATION & PRICE === Located in Sittard, Netherlands Worldwide delivery available Price on request (EXW / excl. VAT) Reliable truck mounted access platform from the well-known manufacturer Palfinger. The Palfinger P300 KS offers a maximum working height of 30 meters and a horizontal outreach of up to 19.5 meters, making it ideal for maintenance, installation, construction and infrastructure work. The machine is equipped with hydraulic outriggers, automatic cage levelling and a rotating aluminium working platform, ensuring stable and safe operation in various working environments. All machines are fully inspected, CE-certified and ready for immediate use. === DELIVERY === Crane loading available upon request for smooth transportation. Flexible shipping options tailored to your destination and logistics preferences. All transports handled professionally by the logistics team of Collé Rental & Sales.

Condition: good (used), Year of construction: 2013, clamping force: 16,000 kN, Equipment: documentation/manual, Clamping force: 1600 t Screw diameter: 135 mm Distance between tie bars V: 1420 mm Distance between tie bars H: 1870 mm Shot volume: 9662 cm3 Type: Horizontal Bodpfxjyh I Ems Ac Tsdg Drive: Hydraulic

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,000 h, clamping force: 500 kN, screw diameter: 25 mm, injection weight: 46 g, total height: 1,779 mm, overall weight: 4,200 kg, This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine. Additional equipment • Granule Dryer • Handling System • Conveyor Belt - 1400 mm x 400 mm • Precision Scale • Temperature Units - 2x HB‑Therm Machine Benefits Technical Machine Benefits • Exceptional energy efficiency • Enhanced platen rigidity and mold safety • Fully electric direct-drive system • Ultra-precise direct-drive motors with 0. 1 ms response time • Displacement: 52 cm³ • Spray pressure: 2180 bar • Tool clamping platens: 520 x 570 mm Bdodex D Eccjpfx Ac Tjg Extra Information Control Unit Advanced control system with NC5+ Automatic mold height and clamping force adjustment Energy-saving routines Dimensions Machine Depth 4308 mm

Year of construction: 1975, condition: good (used), functionality: fully functional, drive type: Diesel 130 Kw, Patrol boat from the former GDR, later used by the Berlin Water Police (WSP 1), IFA 6-cylinder diesel engine. Winter-capable, icebreaker rating up to 3 cm thickness, certified for all waters including open sea. Bodoy D Rk Iepfx Ac Tjdg Dimensions: 11.90 m length, 2.90 m beam, draft 0.90 m. Top speed: over 30 km/h. Engine: Schönebeck 6-cylinder, 4-stroke diesel, type DM 6 VD 14.5/12-1. According to research, the engine delivers either 170 or 220 HP from 10 L displacement. These engines are known for low fuel consumption: at canal cruising speeds (8–12 km/h), consumption is 6–8 L per hour. Equipment includes signal mast, mast spotlight, boat lighting. Dual helm positions: inside cabin and flybridge. AGM batteries, engine start with 24 V system, 12 V onboard network. Brand new onboard toilet. Electric and manual bilge pumps (automatic/manual operation). Complete overhaul from 2021 to 2023: 5-layer primer and 3-layer antifouling coating. Steel hull, aluminium superstructure. New electrical wiring, new exhaust system, new clutch, engine overhauled, fuel tank serviced, new lines installed, new air filter. Engine starts and runs flawlessly, forward and reverse gear shifts without issues. Some work is still required to complete comfort features. The vessel is suitable as a small tugboat or as a work or fishing boat. Lower helm station: the gauges still need to be installed; required instruments and switches are included.

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,450 mm, total height: 1,790 mm, total length: 3,470 mm, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes. Foudila deck nailing machine, DNM-153 is a compact, flexible, and efficient machinery for production of decks for pallet industry to an excellent price-performance ratio. Thanks to the machine’s high production speed, user-friendly design and board magazines with large buffer, it is well suited for manufacturing both standard and special products in small and large production series with only one operator. The machine is capable of producing over 1000 decks per work shift. The machine is equipped with three nailers with magazines for large nail coils. Each nailing pattern can include 1–3 nails and can also be clinched if needed. The boards are fed into magazines with a large buffer – three cassettes for stringer/under boards and one cassette for deck/upper boards. The machine is controlled and programmed via a modern and user-friendly software interface on a 10” touchscreen, using a Beckhoff control system. Thanks to the machine’s compact design, it requires a very small production footprint and makes installation fast and easy because the machine can be delivered fully assembled. The machine can of course be equipped with a conveyor for finished products, automatic stacker and automatic board feeder. These options can also be installed at a later stage, allowing for investment step-by-step. Bdsdpfxeyl Tr Ne Ac Tjg Please feel free to contact us for more information, technical specifications, and price details.

Condition: good (used), The Bystronic glass cutting line for split band dimensions (Maximum 3300 x 2550 mm) Bdodpfst Et Icex Ac Teg Service/spare parts are provided by Hegla, who purchased Bystronic. 1 Bystronic KTR tilting table, Serial No. E9801016-1, o Tilts with built-in hydraulics, roller drive for automatic glass transport to the cutting table • 1 fully automatic float glass cutting table o Type: XYT 972, Serial No. E980016-2 o Can also be used for shaping, waste optimization, and PC Terra o Maximum dimensions 3300 x 2550 mm o Glass thicknesses 2-15 mm o With belt conveyor • 1 breaking table with breaker bars and air cushions o Serial No. E980016-4

Condition: excellent (used), Year of construction: 2015, operating hours: 2,200 h, functionality: fully functional, machine/vehicle number: G3158-0645, HYUNDAI WIA MODEL L300C 2 AXIS CNC LATHE WITH FANUC 0i-T. Very Low hours usage -2200 hours cutting time COOLANT SYSTEM - HIGH PRESSURE 20 BAR PARTS AUTOMATION - BARFEED INTERFACE CHIP CONVEYOR - SIDE HINGED CNC CONTROL OPTION - MANUAL GUIDE-I (NC FANUC 0i) PROBING - QUICK TOOL SETTER - MANUAL TRANSFORMER - 35 KVA AND CABLE MACHINE CONSTRUCTION & FEATURES • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity • 3,000 Rpm High Power Main Spindle • Heavy Duty Cutting with Excellent Performance • 12 Station Rigid Turret • 20 x 24 m/min Rapid Traverse • Hardened & Ground Solid Box Guide Ways MACHINE CAPACITIES Swing Over the Bed Ø 750 mm Swing Over the Carriage Ø 480 mm Maximum Turning Diameter Ø 560 mm Maximum Turning Length 720 mm Bar Capacity Ø 90 mm SPINDLE Chuck Size Ø 305 mm Spindle Bore Ø 102 mm Spindle Speed (rpm) 3,000 rpm Motor (Max/Cont.) 26/22 kW Torque (Max/Cont.) 1,098/929.7 Nm. Spindle Type Belt + 2 Step Gear Spindle Nose A2-8 FEED Travel X 335 mm Travel Z 750 mm Rapid Speed X 20 m/min Rapid Speed Z 24 m/min Slide Type Box TURRET Number of Tools 12 Tool Size - OD 25 mm² Tool Size - ID Ø 50 mm Indexing Time 0.3 Sec/Step TAILSTOCK Taper MT 5 Quill Diameter Ø 100 mm Quill Travel 120 mm Bodew Dcdyjpfx Ac Todg Travel 750 mm TANK CAPACITY Coolant Tank 220 L Lubricating Tank 1.8 L POWER SUPPLY Electric Power Supply 30 kVA Thickness of Power Cable Over 35 mm² Voltage 415 V / 50 Hz / 3 Ph MACHINE Floor Space (L x W) 3,506 x 2,002 mm Height 1,997 mm Weight 6,400 kg STANDARD SUPPLIED MACHINE FEATURES • Ø 305 mm Hollow 3 Jaw Power Chuck • 220 L Coolant Tank • Door Interlock • Chuck Clamp Foot Switch • Total Splash Guard • Quill Type Tailstock • Call Light • Standard Live Centre • Quick Tool Setter • Levelling Pads • Operation Manuals • Electrical & Mechanical Drawings