Used welding smoke suction for sale (139)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 10006472, total height: 2,200 mm, overall weight: 900 kg, space requirement length: 1,800 mm, space requirement width: 100 mm, Filter and extraction unit with automatic cleaning. Suitable for smoke extraction during laser, plasma, and oxy-fuel cutting, blasting, welding, grinding, and powder coating. Year of manufacture: 2020 Model: 10124806 Serial number: 10006472 Motor: 4 kW - 400 V Number of filter cartridges: 2 Raw gas inlet: 200-250 mm Raw gas outlet: 300 mm Width x Depth x Height: 1,200 x 1,800 x 2,200 mm Weight: 900 kg Note: No warranty, installation, commissioning, and transport are included. Subject to prior sale. Godpfezwxanjx Acijbt

Condition: used, Year of construction: 2012, functionality: fully functional, Equipment: type plate available, The Donaldson Torit dust extraction unit DFO 4-16 can be used for welding, cutting, and grinding. It is a non-ATEX unit. The accompanying fan is an ART 632 with a 22 kW motor (non-ATEX), designed for a flow rate of 16,500 m3/h. It was previously used in one of our factories for welding fume extraction. It has since been replaced by dilution systems and is therefore no longer needed. Gedpfxezwclzs Acisbt

Condition: used, Year of construction: 2022, operating hours: 6,731 h, functionality: fully functional, machine/vehicle number: 20804731, type of input current: three-phase, overall weight: 1,695 kg, input voltage: 400 V, total width: 3,405 mm, total length: 3,900 mm, total height: 1,310 mm, volume flow: 29,000 m³/h, space requirement height: 1,310 mm, space requirement width: 3,405 mm, space requirement length: 3,900 mm, filter area: 540 m², suction capacity: 29,000 m³/h, compressed air connection: 4 bar, power: 45 kW (61.18 HP), input frequency: 50 Hz, transport length: 3,900 mm, transport width: 3,405 mm, Plymovent MDB-36 PRO central extraction system for welding fume and dust extraction. Year of manufacture: 2022, used. For sale is a complete central extraction system consisting of a filter unit, fan, frequency converter, piping system, extraction arms, spark arrestors, shut-off dampers, sensors and other accessories. The system will be sold as a complete package according to the scope of the offer. Technical data: - Manufacturer: Plymovent - Type: MDB-36 PRO - Year of manufacture: 2022 - Filter area: 540 m² - Extraction volume flow: approx. 29,000 m³/h - Fan power: 45 kW - Weight: approx. 1,695 kg - Dimensions: approx. 3,900 x 3,405 x 1,310 mm - Filter cartridges cleaned with compressed air - Frequency converter included Gedpfx Acoztmw Tjiobt Scope of supply: - MDB-36 PRO filter unit - 36 filter cartridges CART-PTFE/15 - 45 kW fan in soundproofing box - Frequency converter VFD-45 - Pressure sensor PT-2500 - 2 x SparkShield-500 spark arrestors - Piping system - 7 x KUA-160/4H extraction arms - ERC-5.8 extraction rail with support consoles - Automatic shut-off dampers - Switching devices and sensors - Exhaust/recirculation switchover - Louvre silencer - Other accessories according to the scope of the offer Inspection possible by appointment. The system is sold in its current condition. The system was used for the extraction of welding fumes and grinding dust and is sold as a complete unit. Collection of the system by the buyer is highly desirable. Sale in current condition. Note: The system is currently disassembled and not connected. Before being taken out of service, the system operated perfectly and without any known functional faults. An inspection is of course possible, but a demonstration under power cannot be carried out at present. The system was used for the extraction of welding fumes and grinding dust and is sold as a complete unit. Collection of the system by the buyer is highly desirable. The information on documentation and certification, operating hours and machine/vehicle number will be supplemented and provided later. If you have any questions or are interested, please send us a message. We will gladly provide further information and additional pictures upon request.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 20001901, type of input current: three-phase, overall weight: 990 kg, input voltage: 400 V, total width: 1,780 mm, total length: 2,130 mm, total height: 3,070 mm, volume flow: 14,000 m³/h, filter area: 189 m², suction capacity: 14,000 m³/h, power: 15 kW (20.39 HP), input frequency: 50 Hz, input current: 26 A, intake vacuum (max.): 48 mbar, actuation type: electric, ESTA DUSTMAC F-189 industrial welding fume extraction/filtration unit for sale. Suitable for extracting and filtering welding fumes and dust from multiple extraction points, welding booths, or large capture hoods. Main technical specifications: - Manufacturer: ESTA - Model: DUSTMAC F-189 - Year: 2020 - Serial No.: 20001901 - Filter surface area: 189 m² - Number of filters: 9 pcs - Max. airflow rate: approx. 14,000 m³/h - Max. negative pressure: approx. 4,800 Pa - Main fan motor power: 15 kW - Voltage: 400 V / 50 Hz - Motor speed: 2945 rpm - Current: 25.9 / 15 A (according to the motor nameplate) - Approx. dimensions: 2,130 x 1,780 x 3,070 mm - Weight: 990 kg (according to the nameplate) The unit was reportedly used for approximately one year and then put into storage. Used equipment, sold as-is. Currently visible but not connected to power. Gsdpfxjzuwqts Aciebt Condition and completeness are shown in the photos. Location: Estonia. Loading: Forklift capability is available on-site. We can load the equipment onto the buyer’s truck. Transport: Transportation costs are the responsibility of the buyer.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, type of input current: three-phase, overall weight: 666 kg, input voltage: 400 V, total width: 1,180 mm, total length: 1,180 mm, total height: 3,640 mm, filter area: 60 m², suction capacity: 6,000 m³/h, negative pressure: 2,300 Pa, input frequency: 50 Hz, input current: 11 A, Equipment: type plate available, CleanAirTower is an energy-efficient, stand-alone space filtration and ventilation system. The CleanAirTower space filtration and ventilation system is ideal for environments where localized fume extraction is not feasible. It is even more effective as a supplement to workstation fume and dust extraction systems. Undoubtedly, one of the device's key advantages is its impact on reducing heating costs in industrial halls. Air is drawn in, circulates around the device through a built-in fan, and then clean, warmed air is returned to the environment. Another advantage is the elimination of the need for pipeline installation. The device operates as a self-contained unit. Year of manufacture: 2023 Self-cleaning device (cleaned with compressed air during operation). Specifications: - Motor power: 5.5 kW Gbjdpfxozv Nbto Aciet - Performance: 6000 m3/h - Max. vacuum: 2300 Pa - Sound pressure level: 72 dB(A) - Number of filters: 3 - Filtration area: 60 m² - Dimensions (L/W/H): 1180 mm x 1180 mm x 3640 mm - Weight: 666 kg Stock number: 0009

Condition: good (used), Year of construction: 2008, functionality: fully functional, overall weight: 1,000 kg, total width: 155 mm, total length: 120 mm, total height: 515 mm, volume flow: 8,600 m³/h, Filtercapacity: 4.300 - 8.600 m3 per hour Filtering and collecting Smoke & Dust Country of origin: Sweden Gbedpszzf Akefx Acijt Total size LxBxH: 120 x 155 x 515 cm Weight: 1000 kg

Condition: used, Year of construction: 2018, functionality: fully functional, type of input current: three-phase, overall weight: 95 kg, input voltage: 400 V, volume flow: 1,100 m³/h, pressing: 2,250 Pa, power: 1.1 kW (1.50 HP), input frequency: 50 Hz, Equipment: type plate available, KEMPER ProfiMaster IFA welding fume extraction system – year of manufacture 2018 – 400 V Currently, 2 units are in stock! 1x 3m arm + 1x 4m arm Manufacturer: KEMPER Model: ProfiMaster IFA Year of manufacture: 2018 For sale is a used, fully functional KEMPER ProfiMaster IFA welding fume extraction system. This unit is ideally suited for extracting welding fumes and grinding dust directly at the source and is designed for professional use in workshops and metalworking. The system is in good condition. The filter was replaced on October 6, 2025, making the unit immediately ready for use. Gbedpfx Acszg T A Ajiet Technical data: Airflow: 1,100 m³/h Power supply: 400 V / 50 Hz Motor power: 1.1 kW Rated current: 2.3 A Max. negative pressure: 2,250 Pa Protection class: IP42 Control: 24 V Weight: 95 kg Continuous operation: 100% duty cycle IFA-tested version Equipment: 3m arm length Mobile version Filter monitoring Easy filter replacement via maintenance flap Robust industrial design Ideal for welding workstations Condition: Used Technically flawless Filter insert new as of October 6, 2025 Safety inspection valid until 2026, according to the inspection sticker All information is subject to change without notice.

Condition: like new (used), Year of construction: 2014, type of input current: three-phase, total width: 1,200 mm, total length: 1,600 mm, total height: 3,850 mm, filter area: 120 m², suction capacity: 7,200 m³/h, Dust extraction unit, fume extraction unit, self-cleaning filter from the renowned NEDERMAN brand. The FilterMax DX, designed by Nederman, is a modular filtration system capable of serving extraction points throughout the entire production hall. The FilterMax DX is designed to operate with dry dust that may pose an explosion hazard. The unit is equipped with a reinforced, double-grounded housing with a panel designed to withstand extreme loads that occur during an explosion. Gsdpfx Acszf Hn Aeiebt The unit is like new – it has never been used (stock surplus). Brand: Nederman Model: FilterMax DX 6000 TR Year of manufacture: 2014 Designation: EX II 1/3 D T=125°C Capacity: 7200 m3/h Filtration area: 120 m2 Filter cartridges: 12 pcs Fan power: 11 kW Inlet diameter: 300 mm ATEX panel to relieve explosion pressure ATEX check valve Unit dimensions: Width: 1.20 m x 1.60 m Height: 3.85 m Base: 1.10 m x 1.40 m Stock number: 0008

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, type of input current: three-phase, overall weight: 135 kg, input voltage: 400 V, filter area: 10 m², suction capacity: 1,000 m³/h, negative pressure: 3,000 Pa, input frequency: 50 Hz, input current: 3 A, Equipment: type plate available, Welding fume extractor, dust collector, self-cleaning filter, pneumatic, vacuum KEMPER. For welding, grinding, and all types of dry dust. The filter is cleaned pneumatically with pulses of compressed air during operation, ensuring high device efficiency. Model: Filter-Master XL Year of manufacture: 11/2013 Fan power: 1.5 kW Capacity: 1000 m3/h Vacuum: 3000 Pa Filter cartridge Gbsdpfx Acszu Rm Ijijt Filtration area: 10 m2 Extraction arm length: 3.00 m Stock number: 1163

Condition: used, Year of construction: 2008, functionality: fully functional, type of input current: three-phase, overall weight: 1,200 kg, input voltage: 400 V, total width: 1,050 mm, total length: 1,920 mm, total height: 2,160 mm, filter area: 23.75 m², suction capacity: 1,500 m³/h, Equipment: type plate available, HERDING brand dust extraction and welding fume extraction system. Self-cleaning filter, pneumatic, suitable for plasma, laser, abrasive blasting, grinding gypsum, cement, plastics, and all types of dry dust. The filter is pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. Highly efficient Jet-Pulse cleaning system with low compressed air consumption. Model: Delta Comp 1500-5/9 SB Fan power: 5.5 kW Capacity: 1500 m3/h Filtration area: 23.75 m2 Inlet diameter: 150 mm Height: 2.16 m Width: 1.05 m Depth: 1.92 m Gjdpfxezpxdko Acisbt Weight: 1200 kg Stock number: 1158

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 240900085, overall weight: 410 kg, total length: 1,000 mm, total height: 2,150 mm, space requirement width: 1,350 mm, Filter and extraction unit with automatic cleaning. Suitable for fume extraction during laser, plasma, and oxy-fuel cutting, blasting, welding, grinding, and powder coating. Year of manufacture: 9/2024 Model designation: 5201053763420 Serial number: 240900085 Motor: 3 kW - 400 V Number of filter cartridges: 3 Gbsdpfxozww T To Acijt Raw gas inlet: 250 mm Raw gas outlet: 300 mm Width x Depth x Height: 1,350 x 1,000 x 2,150 mm Weight: 410 kg Note: Excluding installation, commissioning, and transport. Subject to prior sale.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, power: 0.75 kW (1.02 HP), For sale: welding fume extractor and soundproof enclosure in good condition with low hours of use. The unit is fully operational and can be tested. Price on request. Godpfx Asyk Snmocisbt

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, The device comes with a new belt, a spare belt, and additional brushes. It includes a complete set of BOECK brushes with sandpaper, as well as extra wire brushes for removing oxides, as shown in the photo. The set also features a complete extraction system with industrial filters (filter ventilation unit) from Keller. Gbedpfox Ht Rvsx Acist

Condition: used, Year of construction: 2017, functionality: fully functional, type of input current: three-phase, filter area: 216 m², suction capacity: 8,000 m³/h, negative pressure: 3,200 Pa, Dust extraction unit, fume extractor for welding, self-cleaning filter, pneumatic, vacuum-based, designed for continuous operation. Suitable for plasma cutting, laser cutting, sandblasting, soda blasting, welding, and all types of dry dust. The fan is located behind the filter on the clean air side, which minimizes the risk of explosion. Ultra Web filter cartridges are pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. Brand: FÜCHTENKÖTTER Gbjdpfjy T Iyrsx Acist Model: FKPF 192/12 Fan power: 11 kW Airflow: 8000 m3/h Vacuum: 3200 Pa Nozzle diameter: 500 mm Number of filter cartridges: 12 pcs. Filtration area: 216 m2 Year of manufacture: 2017 New filter cartridges (coated with impregnant) Dimensions: Height: 4.02 m Width: 3.95 m Depth: 1.85 m Base: 2.50 m x 1.70 m Stock number: 1120

Condition: used, Year of construction: 2012, functionality: fully functional, type of input current: three-phase, overall weight: 800 kg, input voltage: 400 V, filter area: 84 m², suction capacity: 4,000 m³/h, Welding fume extraction unit, dust collector, self-cleaning filter, pneumatic, vacuum-type, manufactured by Donaldson Torit. Suitable for welding, grinding, sandblasting, and all types of dry dust. Cartridge-type filter elements. The filter is cleaned pneumatically with pulses of compressed air during operation, resulting in high device efficiency. Brand: Donaldson Torit Model: 2DFP4-SPRK Year of manufacture: 2012 Fan power: 5.5 kW Capacity: 4000 m3/h Filtration area: 84 m2 Filter elements: Donaldson Ultra WEB Inlet diameter: 200 mm Equipped with a "SparkTrap" spark arrestor system Dimensions: Gbedpfx Aszm Ux Secijt Width: 1.40m x 1.44m Height: 3.00m Stock number: 1150

Condition: used, Welding Fumes Extractor CAPTAIR Year of construction: 1995 Voltage: 380 V Gbsdpfxjzzv Nnj Acist Tubing Length: 3000 mm Width: 600 mm Depth: 500 mm Total height: 1300 mm

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, This is a pizza conveyor oven manufactured by Lincoln, model Counter Top CT 2512 - continuous belt, year of manufacture 2022. The oven has been professionally overhauled in our in-house workshop and is fully functional. The list price is: €8,998 net / €10,707.62 gross Our price: €4,159.66 net / €4,950 gross You will receive an invoice with VAT shown. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul/inspection and expert cleaning. Checked and fully functional - or your money back. Flexible shipping or self-collection options. Competent advice – before and after purchase. Gbedpezub Ezefx Aciet Provision of operating manuals, connection diagrams & spare parts. Inspection according to DGUV V3. Technical data: W x D x H: approx. 797 x 1269 x 457 mm Power connection: 400 V / kW: 6.1 / 50-60 Hz Exhaust air volume: 700 m³/h Temperature: adjustable up to 315°C Year of manufacture: 2022 Weight: 70 kg Belt dimensions: 410 x 1260 mm Baking area: 410 x 520 mm Belt speed: 30 sec - 15 min Output: 30-40 pizzas (26 cm diameter)/hour Baking time per pizza: 4 minutes Condition: used, overhauled, fully functional Further details: High-performance conveyor oven for up to 40 pizzas per hour with a 4-minute baking time Smallest professional digital conveyor oven for space-saving and easy installation in front and back areas Ideal for heating, cooking, baking and preparing crispy products 4 programmable menu buttons Very high efficiency even at low temperatures thanks to impingement technology Temperature range from 32°C to 315°C freely adjustable Belt speed can be adjusted continuously (30 seconds to 15 minutes conveying time) Equipped with on/off switch and digital touch panel for temperature and belt speed control The conveyor oven replaces conventional kitchen equipment such as salamanders, griddle plates, fryers and ovens Perfect for front-of-house cooking areas due to stackability and mobile base (optional) The electric conveyor ovens are equipped with an innovative and easy-to-use digital control and digital display of temperature and time Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are made exclusively according to our general terms and conditions (AGB).

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 620 kg, filter area: 60 m², suction capacity: 5,000 m³/h, negative pressure: 2,500 Pa, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-based system for plasma cutting, laser cutting, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Kemper System 8000 The filter is pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Gjdpfxozil Ivo Aciobt Year of manufacture: 2003 Fans with a power of 5.5 kW. Flow rate: 5000 m3/h Vacuum: 2500 Pa Filtration area: 60 m2 Stock number: 1147

Condition: used, Year of construction: 2000, functionality: fully functional, type of input current: three-phase, overall weight: 1,600 kg, input voltage: 400 V, total width: 1,900 mm, total length: 3,100 mm, total height: 4,350 mm, filter area: 288 m², suction capacity: 20,000 m³/h, Dust extraction unit, fume extraction unit, self-cleaning cartridge filter, pneumatic, vacuum-based for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is cleaned by pulses of compressed air during operation, resulting in high device efficiency. The fan (built-in) is located on the clean air side, which minimizes the risk of explosion. Parameters: Godpfxjzd Twbs Acisbt Capacity up to 20,000 m3/h Filtration area 288 m2 Cartridge filter elements - 16 pcs. Motor power 15 kW Inlet diameter - 500 mm Dimensions: Height - 4.35 m Width - 3.10 m Depth - 1.90 m Weight approximately 1600 kg Stock number: 1146

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 1,100 kg, input voltage: 400 V, total width: 1,650 mm, total length: 2,000 mm, total height: 4,000 mm, filter area: 140 m², suction capacity: 3,800 m³/h, negative pressure: 3,500 Pa, Dust extraction unit, fume extraction for welding, self-cleaning filter, suitable for plasma cutting, laser cutting, sandblasting, shot blasting, and all types of dry dust. The filter is pneumatically cleaned with compressed air pulses during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Year of manufacture: 2003 Motor power: 7.5 kW Capacity: 3800 m3/h Inlet diameter: 280 mm Gbedjzlzv Iopfx Acijt Filter cartridges: 9 pcs. Filtration area: 140 m2 Fire damper Noise silencer Dimensions: Height: 4.00 m Width: 1.65 m Depth: 2.00 m Base: 1.33 m x 1.84 m Stock number: 1148

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, overall weight: 200 kg, input voltage: 400 V, filter area: 15 m², suction capacity: 1,100 m³/h, negative pressure: 3,200 Pa, input frequency: 50 Hz, hose length: 3,000 mm, Welding fume extractor, dust collector, self-cleaning filter, pneumatic, vacuum KEMPER. For welding, grinding, and all types of dry dust. Self-cleaning welding fume filter with non-polluting dust collection. The mobile cartridge filter KEMPER MaxiFil Clean is designed for continuous operation to filter welding fumes and dust with high concentrations. Suitable for use in welding carbon steels, low-alloy steels, high-alloy steels, and aluminum using any welding method. Gsdpfxozdqv Uo Aciobt Economical in operation due to the long service life of the filter cartridge. Parameters: Capacity - 1100 m3/h Maximum vacuum - 3200 Pa Three-phase fan with a power of 1.5 kW Filtration area - 15 m2 Year of manufacture - 2015 Patron filter cartridge with PTFE membrane Filtration efficiency - > 99.97% Built-in delay timer in start-stop mode. When connected to a start-stop sensor (optional), the delay time for fume extraction after the welding process is completed can be set to a value of 5-60 seconds. Stock number - 1145

Condition: used, Year of construction: 2001, functionality: fully functional, type of input current: three-phase, overall weight: 900 kg, filter area: 95.6 m², suction capacity: 3,000 m³/h, negative pressure: 2,000 Pa, Welding fume extractor, dust extraction unit, self-cleaning pneumatic vacuum filter by Donaldson Torit. Suitable for welding, grinding, sandblasting and all kinds of dry dust. Equipped with Ultra WEB cartridge filter elements. The filter is cleaned pneumatically with compressed air pulses during operation, resulting in high device efficiency. Fan power: 3 kW. Capacity: 3000 m3/h. Vacuum: 2000 Pa. Filter surface area: 95.6 m2. Inlet diameter – 200 mm/180 mm. Overall dimensions: 1.70 m x 1.30 m; Height: 2.30 m. Inventory number: 0006. Gbedoy Sf Nbjpfx Acist

Condition: used, Year of construction: 1995, PlymoVent EMK-1602 Weld Fume Extractor with Flexi Arm. S/No. 4715-1041-2 (1995) Gsdpfx Aszn Uxheciobt Location: These lots are located in Cardiff, Wales, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2022, Technical data: Gedpfexbflrex Acisbt Process: 2-stage Filter surface area: approx. 17 m² Separation efficiency: >99% Welding fume separation class: W3 Extraction capacity: 1100 m³/h Extraction arm diameter: 150 mm Extraction arm length: 3 m Power supply: 3 x 400 V Motor power: 1.1 kW Sound pressure level: 70 dB(A) Dimensions (approx.): 785 x 730 x 950 mm Weight (approx.): 106 kg Features: - Made in Germany - Suitable for low to medium amounts of smoke/dust - Suitable for occasional to frequent use - Convenient filter replacement via service door - Extraction hood rotatable and pivotable by 360 degrees Equipment: - 3 new replacement main filters (approx. €330 each, new) - 7 new replacement pre-filters - 2 extraction hoods (one unused)

Condition: used, Year of construction: 2001, functionality: fully functional, type of input current: three-phase, filter area: 20 m², suction capacity: 1,400 m³/h, arm reach: 2,000 mm, Welding fume extractor, dust extraction unit, self-cleaning, pneumatic, vacuum filter by Plymovent Model: The Smart "ONE" Suitable for welding, grinding, sandblasting, and all types of dry dust. Cartridge filter element in very good condition. The filter is cleaned pneumatically with pulses of compressed air during operation, ensuring high device efficiency. Gbedpfsy Shb Hox Aciet 1.1 kW three-phase fan Capacity up to 1400 m3/h Filtration surface: 20 m2 Wall-mounted extraction arm, 2 m length Stock number: 1135