Used Fume Suction System for sale (37,071)

Year of construction: 2002, condition: ready for operation (used), total width: 2,500 mm, total height: 8,400 mm, product length (max.): 2,250 mm, Dust extraction system manufactured in 2002. This LBH Suction system features a robust radial fan with a motor power of 22 kW and an impressive air flow rate of 13,750 m³/h. The filter area is 155 m², ensuring efficient dust removal with a residual dust content of less than 0.2 mg/m³. If you are looking to get high-quality dust extraction capabilities, consider the LBH Suction system we have for sale. Contact us for further details. • Return air/exhaust air (technical data): • Duct cross-section: 700 x 700 mm • Return air velocity: 7.5 m/s • Exhaust air velocity in workshop: <0.5 m/s • Sound pressure at 3 m from exhaust outlet (summer operation): 55 dB(A) • Extraction fan: • Design: Belt-driven radial fan (impeller statically/dynamically balanced) • Type: VSR-080-0450-K • Motor power: 22 kW • Airflow: 13,750 m³/h • Total pressure: 3000 Pa • Main pipe diameter (fan side): 450 mm • Extraction speed: 24 m/s • Sound pressure at 3 m: 78 dB(A) • Intermediate filter system: • Filter media: Polyester needle-felt hoses • Cleaning: 2 vibrating motors, each 180 W / 3,000 min⁻1 • Filter area: 155 m² • Filter area load: 88 m³/h per m² • Residual dust in clean air: <0.2 mg/m³ • Application categories: U, S, G • Installation: Outdoors with galvanized weather protection cladding • Drives: Gear motor for screw conveyor 0.55 kW; gear motor for sluice (rotary valve) 0.55 kW • Pipe system (technical data): • Main chip extraction pipe: Ø459 mm • Air velocity at extraction points: 22–26 m/s Additional equipment • Ducting and safety: • Galvanized return/exhaust air ducting • Tested K90 fire damper at wall penetration • Controls/automation: • Frequency converter (VFD) in switch/control cabinet for variable air volume • Vibration/noise isolation: • Fan mounted on vibration dampers • Suction- and pressure-side compensators Dcodpfsyn Nn Eex Agzod • Filter discharge and handling: • Screw conveyor (discharge screw) with worm gear drive • Rotary valve (sluice) with rubber sealing elements; sprocket/chain drive • Chip collection container (under filter discharge) • Protection and safety systems: • Extinguishing line with blast nozzles, routed outside and downwards, terminating with C-coupling • Bursting devices (explosion relief) per VDI 3673 • Piping and connection hardware: • Galvanized piping network with pipes, elbows, branches, clamps • Transitions/sleeves to machines • Flexible extraction hoses with hose clamps • Galvanized shut-off valves for unused extraction points

Condition: used, Year of construction: 2014, total width: 2,500 mm, total length: 5,000 mm, total height: 2,500 mm, Empty weight: 2.500 kg Price: On request Filter-area: 228m2 Capacity: 15.000 m3/h Dcodewrr Htepfx Agzsd - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 22653 - Control type: Herding MP 12 - Control: CNC - Motor power: 55.0kW - Transport dimensions: 5000mm x 2500mm x 2500mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 6 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Extraction system, central extraction system, room air filter system ETS Efficient Technical Solutions GmbH Central welding fume extraction system Year of construction approx. 2005 Volume flow approx. 5000 m³/h Extraction connection at filter inlet 1200 x 150 mm Exhaust air connection at filter outlet 400 x 300 mm Dodjicic Hopfx Agzjcd Motor power 10 kW Mains connection 400 Volt, 50 Hz - Control cabinet for wall mounting - Pocket filter - Maintenance flap for filter change - Radial fan on top of the unit Space requirement L x W x H 2000 x 1650 x 3650 mm Transport height without fan 3100 mm Weight approx. 2000 kg Very good condition

Condition: used, Filter system - extraction system, central extraction Cartridge - pulse filter VALCO type Pidclean 4N Central welding fume extraction system Series. No.: 15003 Year of construction 2003 Djdpfsmquwqox Agzecd Volume flow max. 3500 m³/h Filter area 92.8 m² Differential pressure 700 Pa Suction connection at filter inlet Ø 250 mm Exhaust air connection at filter outlet 225 x 160 mm Compressed air requirement 4 to 6 bar Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - AUTEL filter control unit, type Eco S6 - Pneumatic filter cleaning, automatic via control unit - 4 cartridge filters Ø 350 x 660 mm - Maintenance flap for filter change - Radial fan on top of the system - Removable dirt collection container approx. 40 liters - Silencer for fan outlet, Ø 250 mm - Electrical diagram and operating instructions for the control unit available Space requirement L x W x H 2150 x 1350 x 2560 mm Weight approx. 550 kg Good condition

Condition: used, Welding fume extraction unit for wall mounting, KEMPER extraction device Type 85400 Serial number: 279092 Year of manufacture: 1997 Volume flow: 1700 m3/h Static pressure: 2000 Pa Extraction connection: Ø 250 mm Motor power: 1.5 kW Power supply: 400 Volts, 50 Hz - Radial fan - Designed for a mechanical air filter with approx. 99% separation efficiency - Main filter defective (surcharge for new main filter: EUR 195 net) - Articulated extraction arm Ø 150 mm, approx. 2 meters long - Extraction pipe with 3 joints and extraction hood (adapter connection to filter housing missing) - No external control unit, without filter monitoring, without start switch - Air outlet: 250 x 140 mm Required space (L x W x H): 680 x 660 x 1100 mm Weight: approx. 120 kg Good condition Dedpfxou S Tfgo Agzscd Surcharge for new main filter: EUR 195 net

Condition: used, Vacuum pump, ATEX, Elmo G400Capacity: 440 mbarVacuum manipulator + jib arm (max. 50 kg)Application: Handling bags and cartons Dcodpsyfw H Dsfx Agzed

Year of construction: 2003, condition: good (used), Extraction unit as tabletop unit working area approx. 620 x 360 x 450mm large Dcsdpfxeiwgbto Agzsd drawer to collect the sucked material Control unit RE 1.5 for 5 different blower levels

Condition: used, Documentation Multievacuator Additional information Djdpox R Al Dofx Agzecd Pneumatic conveyor belt. Suction operation for powders or granules. The Multi-evacuator unit is a combination of blower and cyclone, designed for the suction of granular materials. The upper part, containing the impeller, can be opened for easy cleaning and replacement of the cyclone filter basket. The fan creates the necessary vacuum to draw the material from point A and discharge it through the cyclone via a rotary valve to point B, either directly or via a discharge line Capacity +/- 5 T/h depending on layout (see document). Motor: 3 kW Plan to provide a rotary valve. Available at extra cost.

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: SN-22-1409, For sale is a high-quality extraction system from the brand Absaugwerk, year of manufacture 2023, specifically designed for the collection and filtration of welding fume (e.g. aluminum dust). The system meets the latest technical standards and includes: Equipment: • Extraction table with downward extraction • Integrated wet separator in line with the latest safety standards • Suitable for professional welding applications • ATEX-compliant (Zone 2, Ex II 3G) • Power: 4.0 kW / 400 V / 50 Hz • Condition: almost as new, fully functional Collection by buyer. Assistance with dismantling/transport can be arranged if required. If you are interested or have any questions, please feel free to send me a message. On-site inspection by appointment is possible. More metalworking machines available, such as bench drill presses, press brakes, column drill presses, eccentric presses, heavy-duty racking, welding tables, MIG/MAG welding units, compressors, etc. – please check my other listings. Domestic price net plus VAT or Net export price Pick-up only – dismantling and transport by buyer or by arrangement. Dcodpfxex Da Tij Agzjd If you are interested or have any questions, please feel free to send me a message. More photos and technical details available on request. All information provided without guarantee or warranty. Subject to errors and prior sale. For further questions, please call. Nous parlons Francais / Мы говорим по русски We speak English / Noi vorbim româneste Viber / WhatsApp / Skype For an additional fee, we handle all customs and registration formalities. We transfer vehicles to the port for an extra charge.

Year of construction: 2022, operating hours: 427 h, condition: like new (used), functionality: fully functional, The extraction unit is from 2022 and has only 427 operating hours. It is therefore immediately ready for use and in excellent condition—see pictures. The price is gross (3,500 EUR net); you will receive an invoice with VAT shown separately. Dodpfx Agjxy Spzszecd The mobile LOCTITE extraction system LAS 250 is a key component for health and environmental protection at the workplace. Molecules released by adhesives in their liquid phase are captured directly at the workstation, cleaned by the extraction unit via a special activated carbon filter system, and then the purified air is returned to the workspace. This reliably prevents air pollution in the work area and ensures compliance with workplace air quality regulations. Thanks to its low weight and mobility, the LOCTITE extraction system can be easily transported to different workstations. Features: - Special fan with high pressure reserve - Adjustable flow volume control - Suitable for up to 4 workstations - Filter combination with special activated carbon - Filter cartridges are recycled upon return - Built-in operating hour counter to monitor filter element life

Condition: ready for operation (used), Year of construction: 2009, A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible. Dcsdpfxsxl Elgj Agzsd

Year of construction: 2014, condition: ready for operation (used), A mobile extraction and filter unit Höcker is available. Filter class: H3, motor power: 4kW, suction connection: 200mm, filter surface area: approx. 12m², max. volume flow: 3400m³/h, max. negative pressure: 2700Pa, collection container volume: 350l, machine dimensions X/Y/Z: approx. 2000mm/1100mm/2000mm, weight: approx. 420kg. On site inspection is possible. Dcsdpfxoyg Nu Ne Agzod

Condition: reconditioned (used), Year of construction: 2019, operating hours: 6,700 h, functionality: fully functional, machine/vehicle number: 3.9 - 1200C, type of input current: three-phase, input voltage: 400 V, filter area: 40 m², suction capacity: 1,500 m³/h, negative pressure: 3,000 Pa, compressed air connection: 5 bar, power: 3 kW (4.08 HP), extraction connection diameter: 200 mm, LM Ecocell 1500 Year of manufacture: 2019. 3 KW / 6 A / 50 HZ Type: 3.9 - 1200C - Equipped with DOL relay start in original LM control unit, with on/off and automatic start-up functions. - Price includes 9x 4.5m² NEW filter cartridges installed in the unit upon sale. Dcsdpfx Agex Rrlmezjd - Price includes 1x NEW HEPA filter cartridge installed in the unit upon sale. - Equipped with compressed air cleaning system, Delta P controlled. - Ex works Soerendonk (NL), loaded on truck free of charge. Tested and operational, can be demonstrated in our workshop. - Sold as seen, no warranty. - Tested on site and in proper working order. - Testing and inspection possible.

Condition: good (used), Year of construction: 2014, Includes existing spare filters. Air volume 8000 m³/h Electronic connection value: 1.5 kW 400 V/50 Hz Width: 2000 mm Dedsx Uz A Aepfx Agzscd Height: 1650 mm Depth: 1000 mm Weight approx. 120 kg

Condition: used, -Manufacturer: Sera -Type: Suction lance SL-02 -Length: 1000mm -Immersion depth: 980 mm -Volume flow: 200 l/h -Manufacturer: Sera Djdpsp Dt Thefx Agzscd -Type: Diaphragm feed pump -Power: 0.37 kW Volume flow: 120 l/h Permissible back pressure: 8 bar including digital level scale

Year of construction: 2025, condition: new, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy. Dsdelxyhfjpfx Agzjcd

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dcsdpfedrtalsx Agzjd Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: used, functionality: unexamined, machine/vehicle number: V250 (Bofa) | WLA250 (Weidinger), input voltage: 230 V, Used solder fume extraction units from Bofa & Weidinger Dodpjxp H Ttjfx Agzecd Model: V250 (Bofa) | WLA250 (Weidinger) Voltage: 230V (50Hz) | 1.1A Including power cable.

Condition: used, Welding fume extraction, filtration unit, dust extraction by LINCOLN NORWELD Central extraction system, extraction plant, silo filter, cartridge filter, pulse jet filter, dedusting filter Type FU-80-A Serial no. 001799 Year of manufacture: 1996 Airflow rate max. 6000 m³/h (depending on fan capacity) Filter area 80 m² (4 units of 20 m² each) Extraction inlet at filter entry Ø 250 mm Exhaust outlet at filter exit Ø 250 mm Compressed air connection 4 bar - without fan, without filter control - Filter category C, 99.9% separation efficiency - Pneumatic filter cleaning - Filter inlet with pneumatic shut-off valve - 4 used filter cartridges, Ø 325 mm, length 1200 mm - Service access hatch 240 x 240 mm Space required (L x W x H): 1400 x 1600 x 2970 mm Weight: approx. 300 kg In good condition Dcodpfx Aoxf Up Iogzod

Condition: used, Suction lifter load capacity: 220 kg System with two sliding bridges and two lifting motors. Dcodpfxexcvh To Agzed Rail length: approx. 25,500 mm System width: approx. 6,500 mm Height from floor to running rail: approx. 3,700 mm.

Condition: new, Year of construction: 2025, functionality: fully functional, Our powerful "MM 2010" sandblasting cabinet uses a pressure blasting process and, thanks to its innovative media recirculation system, is suitable for all types of blasting media. Thanks to the bucket elevator permanently connected to the cabinet, even the heaviest types of blasting media, such as stainless steel, cast steel, and other metallic media, can be used without any problems. Unlike competing systems, the blasting media is not sucked back into the cabinet, but rather transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator conveys the material upwards and throws it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed media recirculation recycling system ensures continuous media flow, regardless of the extraction system's suction power. Thanks to the media recirculation system and the innovative fan technology, the blasting cabinet has very low energy requirements (0.75 kW fan motor). Since the blasting material is not sucked back in, no oversized extraction system with high power consumption is required (as with many competitive systems). To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure blasting tank. This is equipped with a pressure regulator for continuously adjusting the blasting pressure from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the blasting tank, protecting the blasting media from moisture. The pressure blasting nozzle is made of highly wear-resistant boron carbide and allows a service life of up to 1,000 hours, depending on the blasting media used. The blasting chamber is equipped with a wear-resistant rubber lining, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. The permanently installed cartridge filter extraction system ensures optimal visibility in the blast chamber and maximum abrasive service life. The extraction system features continuous cleaning of the filter cartridges using compressed air blasts. This ensures a long service life of the filter media and consistently consistent extraction performance. The blast chamber is loaded via an angled front flap that swings completely upwards. This allows the blast cabinet to be loaded using a forklift or crane. The sturdy work grate can support a maximum load of 500 kg. To ensure optimal visibility in the blast chamber, two powerful and energy-saving LED lights are mounted on the cabin roof. Their roof-mounted design protects them from dust and wear. Dsdpfxswc Nrns Agzecd The system is operated via a modern touchscreen display. To ensure safe operation of the blast cabinet, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made of toughened safety glass and are provided with a wear-resistant film.

Condition: excellent (used), functionality: fully functional, Central conveyor system consisting of: Dcodswg H R Nopfx Agzod 1. Piovan type F44/2 vacuum pump 2. 10 Piovan material conveyors 3. 2 Piovan type LYBRA V coloring devices

Condition: ready for operation (used), functionality: fully functional, usable tank capacity: 50,000 l, TECHNICAL DETAILS Dsdjymxynspfx Agzocd Number of silos: 2 Gross volume: 50 m³ Diameter: 3,500 mm Cylinder height: 5,000 mm Outlet diameter: 200 mm Roof shape: Conical 15° Bottom: Conical shape, apex angle: 60° EQUIPMENT Lifting eyes Lockable manhole, 600 mm diameter with protective grid Support for over-/underpressure protection DN80 PN10 connection for filling line Connection with blind flange Connection for overflow Connection for level switch

Condition: used, Cask Brewing System 6 Head Can Filler, C02 and Seamer C/W Printer and Depalletiser Dodpsymylxsfx Agzecd

Condition: excellent (used), Year of construction: 2020, Rex Cutting System RSS70 The Rex Cutting System RSS70 is a perfect as a stand alone cutting device equipped with a three edged sickle knife that separates the sausage as the twist section perfectly with no rip to the product. Made from stainless steel ensuring it can be easily cleaned, the REX RSS70 is a highly successful cutting performance machine using either natural or artificial sausage casing. Simple and easy to use large touch screen PLC. Dodpsyq Nmaefx Agzscd Specification Throughput : up to 1200 cuts/min Portion Lengths : Min 40mm Max 800mm Calibre Range : 14 to 40mm Weight 260kg Perfect with all types of sausage filling.