Used Welding Extraction for sale (8,702)

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 641, 110v mobile extraction unit Hjdpfx Aowxmhxjacefn

Condition: as good as new (ex-display), Year of construction: 2025, SRF master figure left 2 m suction arm Scope of application Low smoke and dust Sporadic usage Use Little run the extractor hood required Flexible by additional hose connection rear Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Push handle and cable holder Procedure filter type disposable filter filter surface approx. 12 m² ᐳ 99% filtration efficiency 3-stage filter material glass fibre welding smoke off vagina class W3 Additional filter two prefilter basic data suction capacity Max 950 m ³/h diameter extraction arm Ø 150 mm length extraction arm 2 m diameter suction connection Ø 150 mm electrical connection 230 V / 50 Hz motor 1,1 kW sound pressure level 72 dB(A) dimensions (W x D x H) 705 x 655 x 900 m m weight approx. 71 kg Hfjdpfsdqzbrsx Aacon

Condition: excellent (used), Welding fume extraction Make: Kemper Model: Vacu Fil 500 Year of manufacture: 2/2016 Airflow: 500 m3/h Supply voltage: 400 Volt Hfjdpjxk Uxasfx Aacon 12.9 amperes 5.5 kW Accessories: unused spare filter cartridge Transport dimensions: Length: 1200 mm Width: 660 mm Height: 1400 mm Weight: 250 kg

Condition: like new (used), functionality: fully functional, Equipment: type plate available, Dust Hog Duster SG 801-100 dust extraction system in mint condition. Hjdpfsv Iyybex Aacefn The system was only used once for a test run; otherwise, it is unused and in excellent condition. Power: 1.5 kW Flow rate: max. 800 m³/h Pressure: 1,940 Pa Pneumatic filter cleaning Connection diameter: 200 mm Shipping available for €120. #8095

Condition: used, Year of construction: 2022, Technical data: Process: 2-stage Filter surface area: approx. 17 m² Separation efficiency: >99% Welding fume separation class: W3 Extraction capacity: 1100 m³/h Extraction arm diameter: 150 mm Extraction arm length: 3 m Power supply: 3 x 400 V Motor power: 1.1 kW Sound pressure level: 70 dB(A) Dimensions (approx.): 785 x 730 x 950 mm Weight (approx.): 106 kg Features: - Made in Germany - Suitable for low to medium amounts of smoke/dust - Suitable for occasional to frequent use - Convenient filter replacement via service door Hjdpfx Aexbflroacofn - Extraction hood rotatable and pivotable by 360 degrees Equipment: - 3 new replacement main filters (approx. €330 each, new) - 7 new replacement pre-filters - 2 extraction hoods (one unused)

Condition: used, Welding fume extraction, filtration unit, dust extraction by LINCOLN NORWELD Central extraction system, extraction plant, silo filter, cartridge filter, pulse jet filter, dedusting filter Type FU-80-A Serial no. 001799 Year of manufacture: 1996 Airflow rate max. 6000 m³/h (depending on fan capacity) Filter area 80 m² (4 units of 20 m² each) Extraction inlet at filter entry Ø 250 mm Exhaust outlet at filter exit Ø 250 mm Compressed air connection 4 bar - without fan, without filter control - Filter category C, 99.9% separation efficiency - Pneumatic filter cleaning - Filter inlet with pneumatic shut-off valve - 4 used filter cartridges, Ø 325 mm, length 1200 mm - Service access hatch 240 x 240 mm Space required (L x W x H): 1400 x 1600 x 2970 mm Weight: approx. 300 kg In good condition Hfjdpfxsxf Up Io Aacon

Condition: like new (used), Year of construction: 2018, Mint condition laser fume extractor from Plymovent Hfedpswpquwjfx Aacjn Model: Mobile Pro

Condition: as good as new (ex-display), Year of construction: 2025, SRF Maxi. (Picture on the right) 3 m suction arm Scope of application Medium smoke and dust Regular usage Use Little run the extractor hood required Contamination free filter change Safe operation due to phase sequence detection High efficiency due to long Service life of the filter Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Automatic start/stop system (optional) Workplace lighting (optional) Technical data Procedure 2-speed Filter type disposable filter Filter surface approx. 20 m ² ᐳ 99% filtration efficiency Filter material of non-woven polyester Welding smoke off vagina class W3 Additional filter pre-filter (ALU knitted fabric) Basic data suction capacity Max 1,100 m³/h Extraction arm diameter Ø 150 mm Extraction arm, length 3 m Diameter suction connection Ø 150 mm -. Power supply 3 x 400 V / 50 Hz Motor 1,1 kW Hfsdpfx Aodqzcvjacen Noise level 70 dB(A) Dimensions (W x D x H) 790 x 815 x 1080 mm Weight 71 kg approx. 120 kg

Condition: good (used), Year of construction: 2012, functionality: fully functional, Welding fume filter, mobile, BGIA-certified, hose version with one extraction arm, 3.0 m, outer diameter = 150 mm Hodpfx Aaswc Un Iecefn

Condition: good (used), Year of construction: 2017, functionality: fully functional, volume flow: 1,000 m³/h, pressing: 10,000 Pa, power: 5.5 kW (7.48 HP), TEKA Filtercube 4N 1000 MV filter extraction system, built in 2017, with pre-filter. Welding fume extraction, room filter, and laser extraction. Hjdpov T A H Ijfx Aacjfn Motor power: 5.5 kW Flow rate: 1000 m³/h Max. pressure: 10,000 Pa Weight: 350 kg The system can be loaded with a forklift for transport. #8336

Condition: used, Year of construction: 2014, total width: 2,500 mm, total length: 5,000 mm, total height: 2,500 mm, Empty weight: 2.500 kg Price: On request Filter-area: 228m2 Capacity: 15.000 m3/h - Year: 2014 - Documentation available: No - CE marking present: Yes - Serial number: 22653 - Control type: Herding MP 12 - Control: CNC - Motor power: 55.0kW - Transport dimensions: 5000mm x 2500mm x 2500mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 6 Hodjwrr Htopfx Aacofn Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), IVAT Air FTower 5000 m³/h – Welding Fume Extraction Unit Year of manufacture: 2017. The system is fully operational and has only 1,676 operating hours. It is ideally suited for filtration in industrial welding halls as well as other technological processes in metalworking. ⸻ Technical Data • Machine type: IVAT Welding Fume Extraction Unit • Model: IVAT Air FTower 5000 m³/h Filter Tower • Input voltage: 400 V • Total height: 2,900 mm • Filter area: 80 m² • Extraction capacity: 5,000 m³/h • Fan output: 5.5 kW • Filter cartridges: 4 pcs • Additional fine filter: Filtration class F9 • Dust collecting container: 100 l • Noise level: 75 dB(A) • Degree of filtration: > 99.6% ⸻ Special Features & Operation • Layered ventilation principle: Contaminated air is drawn in at the top, filtered, and draft-free air is discharged at floor level—precisely where personnel are located. • Wide 270-degree airflow ensures optimal distribution without draughts ( Hedpfoxk Trfsx Aacofn

Condition: good (used), Year of construction: 2018, machine/vehicle number: 18-1427, Offer 24500 Technical Specifications - Upright design for extracting welding mist and grinding dust - Exhaust air can be vented into the work area or outside - BGIA M – Class - KOMPAKT 3000 control system - Air flow rate approx. 28,000 m³/h - Max. static pressure 4,000 pa - Efficiency > 99.9% - 6 cartridge filters Hsdpfx Aaewdvthocsfn - Filter area 6 / 150 m² - Jet Pulse filter cleaning - Dust container 40 L - Compressed air connection 6 to 8 bar - Drive - Fan 400 V / 5.5 kW - Space requirement approx. W 1900 x H 3600 x D 1600 mm - Weight approx. 990 kg - Operating hours readout 11,216 h

Condition: excellent (used), Year of construction: 2017, type of input current: DC, KEMPER Dusty welding smoke extractor + 10 meter suction pipe + exhaust welding gun Holch 350-SC. 3.5 meters Kemper Dusty welding fume hood Suction power - 260 m³/h suction pipe: 10 meters Holch 350-sc 3.5m suction welding gun Filter mode - Cleanable filter Filter cleaning method - Manual Filter surface - approx. 1.35 m² Motor power - 1.6 kW Power supply - 1 x 230 V / 50 Hz Filter type - Filter cartridge Filter material - ePTFE membrane Filter efficiency - > 99.9 % Dust classification - M Basic data Dimensions (W x H x H) - 300 x 300 x 690 mm Weight - 24 kg Rated current - 8.7 A Noise level - 74 dB(A) Hfsdjmxklhjpfx Aacen Further information Fan type - Suction turbine Hose connection - ~45 mm x 2

Year of construction: 2023, operating hours: 180 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 11124, Welding fume extraction unit from "reder systems". Dimensions (L-W-H): 1700x900x2300 mm, air flow rate: 4000-6000 m³/h. Includes piping and 8 extraction arms for equipping 8 welding stations. The system is dismantled and ready for transport. Hjdpfx Aaoxl Dpqecefn

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, DFPRO6-Cyclo 400-600 volt 7.5 kW 2007 Price €5,000 Hsdpfx Aaexcgw Sjcefn DFPRO16-Cyclo 400-690 volt 18.5 kW 2008 Price €7,000 3DFP9-SPRK 3x400 volt 11 kW 2018 Price €12,000 2DFP6 3x400 volt 7.5 kW 2018 Price €10,000 Can be inspected under power due to insolvency

Condition: used, Year of construction: 1988, Welding fume extractor Fabr.ESTA Type:SRF - 2000 Year 1988 Hfsdsu Hlppspfx Aacjn Ready for use.

Condition: used, Extraction system, central extraction system, room air filter system ETS Efficient Technical Solutions GmbH Hfodpfxjicic Hs Aacen Central welding fume extraction system Year of construction approx. 2005 Volume flow approx. 5000 m³/h Extraction connection at filter inlet 1200 x 150 mm Exhaust air connection at filter outlet 400 x 300 mm Motor power 10 kW Mains connection 400 Volt, 50 Hz - Control cabinet for wall mounting - Pocket filter - Maintenance flap for filter change - Radial fan on top of the unit Space requirement L x W x H 2000 x 1650 x 3650 mm Transport height without fan 3100 mm Weight approx. 2000 kg Very good condition

Condition: good (used), Year of construction: 2018, machine/vehicle number: 18-426, Offer 24497 Technical Specifications - Upright design for extracting welding mist and grinding dust - Exhaust air can be vented into the work area or outside Hfodpfx Aaowd Nlkecsn - BGIA M – Class - KOMPAKT 3000 control system - Air flow rate approx. 13,000 m³/h - Max. static pressure 4,000 pa - Efficiency > 99.9% - 4 cartridge filters - Filter area 6 / 150 m² - Jet Pulse filter cleaning - Dust container 40 L - Compressed air connection 6 to 8 bar - Drive - Fan 400 V / 7.5 kW - Space requirement approx. W 1,900 x H 3,400 x D 1,600 mm - Weight approx. 800 kg - Operating hours readout 4,126 h

Condition: used, Filter system - extraction system, central extraction Cartridge - pulse filter VALCO type Pidclean 4N Central welding fume extraction system Series. No.: 15003 Year of construction 2003 Volume flow max. 3500 m³/h Filter area 92.8 m² Differential pressure 700 Pa Suction connection at filter inlet Ø 250 mm Exhaust air connection at filter outlet 225 x 160 mm Compressed air requirement 4 to 6 bar Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - AUTEL filter control unit, type Eco S6 - Pneumatic filter cleaning, automatic via control unit Hfodpfx Aajmquwqecsn - 4 cartridge filters Ø 350 x 660 mm - Maintenance flap for filter change - Radial fan on top of the system - Removable dirt collection container approx. 40 liters - Silencer for fan outlet, Ø 250 mm - Electrical diagram and operating instructions for the control unit available Space requirement L x W x H 2150 x 1350 x 2560 mm Weight approx. 550 kg Good condition

Condition: good (used), Year of construction: 1997, machine/vehicle number: 0001, Offer 24587 Technical data: Hfodswn Egropfx Aacsn - Electrostatic filter with control light - Exhausted and cleaned air is recirculated to the work area - Wall-mounted version with two jointed extraction arms - Jointed arm length approx. 9000 mm - Air volume flow approx. 4700 m³/h - Active filter surface 9.2 m² - Drive - Fan 400 V / 0.75 kW - Space requirement approx. W 700 x H 1600 x D 550 mm - Weight approx. 120 kg

Condition: good (used), Year of construction: 2002, machine/vehicle number: 121630011, Offer 24386 Technical data: - Mobile cartridge filter unit with articulated extraction arms - suitable for welding mist extraction when welding Hfsdpfeu Aafdsx Aacon - steel + stainless steel + aluminium + unalloyed or galvanized steels - Welding fume class W3 - Control with digital display - Separation efficiency 99 % - Air volume flow approx. 3000 m³/h - Max. static pressure 2500 pa - Filter area 20 qm² - Automatic filter cleaning - Articulated extraction arm 360° 4000 mm - Arm diameter 160 mm - Drive - fan 400 V / 1.10 kW - Space requirement approx. W 700 x H min. 2150 x D 1100 mm - Weight approx. 150 kg - Operating hours ( read ) 980 h

Condition: good (used), Year of construction: 1999, machine/vehicle number: 108016, Offer 05394 Technical data: - BIA-tested welding fume extractor - Articulated extraction arm 3000 mm - Air flow rate approx. 1000 m³/h - Max. static pressure 2700 pa Hodswqdycspfx Aacjfn - Filter area approx. m² - Filter control light for filter change - Separation efficiency 99.9 % - Compressed air connection 6 bar - Drive - Fan 400 V / 1.5 kW - Required space approx. W 700 x H min. 1800 x D 950 mm - Weight approx. 250 kg

Condition: good (used), Year of construction: 2022, machine/vehicle number: 22001235, Offer 24576 Hjdpfx Aovzrkxoacofn Technical data: - mobile version with articulated extraction arm - air volume flow approx. 950 m³/h - max. negative pressure 2800 Pa - filter area 10 m² - filter control light for filter change - articulated extraction arm with gas pressure dampers 3000 mm - drive 230 V / 1.3 kW space requirement approx. W 900 x H 1250 x D 750 mm - weight approx. 110 kg

Condition: good (used), Year of construction: 2019, machine/vehicle number: 9501441040100301, Offer 24469 Welding mist filter system with spark pre-separator + extraction arms Technical data Hedpfx Aajuwl Duscsfn - Vertical version for filtering welding fumes + grinding dusts, - Welding fume class "W 3" - Suitable for filtering welding fumes from steels with - chromium + nickel content of over 30% - Exhaust air can be discharged into the work area, e.g. for heating or outside - can be - TEKA control unit - Air volume flow up to approx. 4000 m³/h - Max. static pressure up to approx. 3000 pa - 4 BIAM filter cartridges - Pulse Jet cleaning system with separation efficiency > 99 % - Separate control cabinet - Connection 400 V / 4 kW - Space requirement Filtercube approx. W 850 x H 3150 x D 850 mm - Weight approx. 380 kg - Separate spark pre-separator make TEKA type FVS 4000 - 6000 - Space requirement spark separator W 850 x H 1650 x D 950 mm - 3 articulated extraction arms - Pipework