Used Dimter for sale (44)

Condition: ready for operation (used), Year of construction: 2018, Optimizing Cross-Cut Saw manufactured in 2018. This WEINIG DIMTER Opticut S90 features a saw blade diameter of 500 mm and a maximum cutting height of 120 mm. It accommodates input lengths from 400 to 6,300 mm and widths from 20 to 300 mm. If you are looking to get high-quality cutting capabilities, consider the WEINIG DIMTER Opticut S90 machine we have for sale. Contact us for further details. • Saw blade • Diameter: 500 mm • Bore: 30 mm • Adjustable saw blade speed: 40–100% via frequency converter • Workpiece capacity • Input length (min/max): 400–6,300 mm Cedpfx Ansylmmmsmsrf • Width (min/max): 20–300 mm • Thickness (min/max): 10–120 mm • Maximum cutting height: 120 mm • Minimum cross-section: 20 x 10 mm • Maximum cross-section 1: 215 x 120 mm • Maximum cross-section 2: 300 x 40 mm • Permissible timber curvature: max 2 mm/m or 8 mm over entire length • Table inclination: 10° • Motion and accuracy • Positioning speed (reverse stroke): max approx. 180 m/min • Positioning speed (forward stroke): max approx. 60 m/min • Positioning accuracy: +/- 0.1 mm • Motors and power • Pusher motor power: 5.1 kW • Saw motor power: 7.5 kW • Total electrical load: approx. 15 kW • Control and interface • Control unit: OptiCom Pro with 18.5" touch screen • Screen resolution: 1366 x 768 pixels • Protection class (front): IP65 • Interface: USB port and Ethernet network connection • Data format: CSV (ASCII) for import/export • Utilities and environment • Voltage: 400 V / 50 Hz • Operating pressure: 6–8 bar (min.) • Air consumption: approx. 250 NL/min • Extraction connection: diameter 125 mm • Required extraction performance: speed approx. 30 m/s; volume approx. 1,300 m³/h • Noise level (idling): ≤ 85 dBA

Condition: ready for operation (used), Year of construction: 1998, working width: 230 mm, overall weight: 2,500 kg, spindle speed (max.): 6,000 rpm, This 5-spindles WEINIG DIMTER PROFIMAT 23 E was manufactured in 1998. It features a working width of 230 mm and a working height range of 8-120 mm. The machine operates at a spindle speed of 6000 rpm and has a feed rate of 5-24 m/min. If you are looking to get high-quality wood planning capabilities, consider the WEINIG DIMTER PROFIMAT 23 E machine we have for sale. Contact us for further details. • Condition note: Not rebuilt – without warranty Codpfezaq Taox Anmorf • Working height: 8–120 mm • Number of spindles: 5 (top, right, left, bottom, top) • Feed rate: 5–24 m/min • Total power consumption: approx. 25 kW • Feed table length: approx. 2000 mm

Condition: used, Weinig OptiCut C700 under-table cross-cut saw for the safe and precise cutting of solid timber, particularly hard and heavy timbers with large cross-sections. The machine features a pneumatically guided saw unit, two-hand control and a hold-down device, and is ideally suited for sawmills, timber construction and industrial solid timber processing. Codpfx Anjzrywdjmerf Technical data: - Saw blade diameter: 550 mm - Cutting width: 750 mm - Cutting depth: 175 mm - Motor: 5.5 kW

Condition: used, Dimter OptiCut 700 automatic optimising cross-cut saw (sliding saw) for cutting very wide timber to size according to defects (marked with fluorescent chalk) and length. Codpfx Aszryvasnmsrf Technical data: - Cutting height: max. 120 mm - Feed length: max. 5,500 mm - Cutting width: max. 700 mm - Saw blade diameter: max. 700 mm

Condition: used, Year of construction: 2007, No. 3177 Automatic optimizing cross-cut saw WEINIG Dimter OptiCut 200 - 1 Used, year of construction 2007, machine already dismantled For cutting timber to fixed lengths Timber dimensions to be processed: Minimum / maximum input length: 3000 - 5000 mm Minimum / maximum input width: 80 - 200 mm Minimum / maximum input thickness: 38 - 80 mm Maximum timber cross-section: 200 x 50 mm Minimum / maximum finished timber length: 700 - 1000 mm Average number of cuts per board: 5 Types of wood: softwood or hardwood System performance: Maximum feed speed: 180 m/min, continuously adjustable Time per cutting cycle, including braking: 0.7 - 1.2 seconds Overview of components: Item 1: Infeed conveyor belt upstream of the saw Crjdpfsu Atmusx Anmjf Length: 1.5 m, coupled to the saw’s feed motor Item 2: Automatic cross-cut saw OptiCut 200 - 1, left-hand version With integrated length-measuring wheel and integrated blow-out device for waste pieces Graphics-capable operator terminal with 1/4 VGA display, numerical keypad and function keys, including the OptiCom software package for system control The machine is fed from the left-hand side Item 3: Outfeed conveyor belt / sorting station With drive unit, without ejectors Conveyor length: approx. 1.5 m The infeed table was not used by the previous owner. Two feed rollers were installed for feeding the material. The conveyor table is included, only the rubber conveyor belt is missing. Sale on behalf of customer, ex location near 39100 Bolzano (Italy), without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: excellent (used), Year of construction: 2005, Weinig Dimter OptiCut S 90 optimizer with 2 ejectors – after technical review – German production – year of manufacture 2005 TECHNICAL PARAMETERS: max. length of cut material 4500 mm max. width 360mm max. height 160mm automatic length measurement optimization in 4 quality classes total power 13 kW blade motor power 7. 5 kW Crsdoi Apgmjpfx Anmsf pneumatic side and top pressure disc diameter max. 500mm OptiCom Assist control receiving conveyor 5600 mm two ejectors total length 13 m component marking printer cutting accuracy +/- 0.5 mm transport dimensions (length / width / height) 600 / 240 / 190 cm weight ~ 1800 kg

Year of construction: 2004, condition: excellent (used), Dimter optimization crosscut saw 350 with elevation AH 1400 mm crosscut see picture crosscut saw control cabinet Scanner interface sorting 6500 mm long 3 pushers Waste flap Machine is already dismantled and immediately available Machine ran without problems until dismantling Transport can be organized Credpfxjncc Ics Anmef

Condition: good (used), Paddle ejector for sorting belt Length: approx. 600 mm Working height: 850 mm Drive: Rexroth servo Csdpfxjqmizde Anmjrf more available also other length

Condition: used, Dimter Profipress L 2500 Year of manufacture: 2006 Dimensions: • Lamella width (for panels): 30-150 mm • Thickness: 11-60 mm • Infeed length: 800-2500 mm • Panel width: variable, up to max. 1300 mm Csdpfxsyhggro Anmorf • Infeed width per cycle: min. 650 mm / max. 1300 mm • Integrated hydraulic unit for pressing force and hydraulic motors • Electrical: • Operating voltage: approx. 400 V / 50 Hz • Electrical connection rating for 40 kW RF generator: 56 kW

Condition: good (used), with integrated crosscut saw For cutting the lamellas of the glued timber beam to length. Machine length 2200 mm Machine width 1200 mm Working height 850 mm Codpfxog E Iqfo Anmsrf without control system

Condition: good (used), Sorting system, sorting conveyor belt, sorting process after an optimization saw. Conveyor belt length: approx. 8,000 mm Conveyor belt width: approx. 250 mm Working height: without legs Drive: without motor 5 pneumatic buffers The conveyor belt is disassembled for transport; cables and hoses need to be replaced. Crsdpfeg Ufnxox Anmof

Condition: excellent (used), Year of construction: 2022, operating hours: 5,000 h, functionality: fully functional, OptiCut S 50+ optimizing saw Csdpfx Aozkbmdenmjrf - Feeding system with transverse conveyors and automatic pusher - Outfeed conveyor belt with 2 zones, including ejectors and tables, one of which is foldable - Saw motor: 7.5 kW - Boards/planks up to 5 meters long can be fed into the machine. - Maximum cutting cross-section: 270 x 100 mm Additional technical information and a video are available upon request.

Condition: like new (used), functionality: fully functional, operating hours: 5 h, Hydraulic cylinders available in various sizes in stock others available upon request or also in the jöma shop Cjdpfjr Hnfcex Anmerf These black-painted cylinders were used for a maximum of 1-5 hours on a prototype patent press.

Condition: repair required (used), functionality: unexamined, Dovetail grooving system for wood packages dimter HK 400 Dovetail grooving system Input lengths: 800–6,000 mm Grooving height: 285 mm, optional 300 mm Color: Blue Consisting of: Pos. 01 Packaging unit Pos. 02 Package roller conveyor Pos. 03 Central milling cutter Pos. 04 Package roller conveyor Pos. 05 Package singulation unit Pos. 06 Chain transverse conveyor Pos. 07 Infeed roller conveyor Pos. 08 Cycle press Pos. 09 Feed unit Pos. 10 Crosscut saw Including control cabinets and operator panels The system requires repair and is sold in its current condition. It has already been dismantled and is stored in Achern. Credpfxjvi Hw Nj Anmjf All technical documentation is available. We are available at any time to answer questions about the system and provide technical information. We will provide consulting support for the repair and reassembly.

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 3,000 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 142 mm, controller manufacturer: SIEMENS, controller model: WS 400-20, CNC processing center manufactured in 1997. This WEINIG / DIMTER Unicontrol 10 features a maximum workpiece length of 3,600 mm and a maximum workpiece height of 100 mm. It includes a powerful cross-cut saw with a spindle speed of up to 3,000 rpm and a tenoning spindle motor power of 15 kW. If you are looking to get high-quality CNC processing capabilities, consider the WEINIG / DIMTER Unicontrol 10 machine we have for sale. Contact us for further details. • Max. workpiece height: 100 mm • Min. workpiece height: 40 mm • Min. workpiece width: 40 mm • Max. workpiece width: 140 mm • Max. workpiece length with CNC stop: 3,500–3,600 mm • X-axis stroke: 3,000–3,500 mm (version dependent) • Cross-cut saw motor power: 3.7 kW • Cross-cut saw spindle speed: 2,800–3,000 rpm • Cross-cut saw max. tool diameter: 400 mm • Cross-cut saw spindle diameter: 40 mm • Tenoning/slotting spindle quantity: 2 pcs • Tenoning spindle diameter: 50 mm • Tenoning spindle clamping length: 400–640 mm • Tenoning spindle max. tool diameter: 400 mm • Tenoning spindle motor power 1: 11 kW • Tenoning spindle motor power 2: 15 kW • Tenoning spindle speed: 2,900–3,250 rpm • Profiling spindle quantity (vertical): 2–3 pcs • Profiling spindle diameter: 50 mm • Profiling spindle clamping length: 320–400 mm • Profiling spindle max. tool diameter (flight circle): 232 mm • Profiling spindle motor power: 11 kW (each) Crodpfjy Ixpasx Anmjf • Profiling spindle speed: 6,000 rpm • Horizontal profiling unit (top) motor power: 3 kW • Horizontal profiling unit spindle diameter: 40 mm • Horizontal profiling unit max. tool diameter: 130 mm • Horizontal profiling unit speed: 5,850 rpm

Condition: like new (used), Year of construction: 2009, functionality: fully functional, operating hours: 4,000 h, input voltage: 380 V, input current: 80 A, input frequency: 50 Hz, type of input current: DC, pressing force: 160 t, stroke length: 150 mm, operating speed: 50 mm/s, reverse speed: 10 mm/s, table width: 1,300 mm, table length: 2,500 mm, table height: 150 mm, throat depth: 1,300 mm, ram plate width: 1,300 mm, ram plate length: 2,500 mm, distance table to ram: 200 mm, clearance between the columns: 2,500 mm, retraction force: 100 t, oil tank capacity: 50 l, total length: 3,500 mm, total width: 4,500 mm, total height: 2,300 mm, overall weight: 6,000 kg, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, We offer this Dimter Profitest 2500 gluing press in like-new condition, manufactured in 2009. Manufacturer: Dimter Model: Profitest 2500 Year of manufacture: 2009 Condition: like new Type: gluing press Crsdpfx Ajzin Aionmef If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: used, Year of construction: 2011, Undercut cross-cut saw with continuously adjustable pneumatic cutting feed located at the front of the machine. Pneumatically controlled workpiece clamping device (also serves as a safety guard). Well-protected pneumatic units mounted within the compact machine body, with the maintenance unit mounted externally on the machine base frame. Extra-flat special circular saw motor for increased cutting height. Cut initiation via two-hand control with safety shield. The saw kerf is positioned on the right side with an inclined opening to allow cut-offs and waste pieces to fall freely. Safety Standards: CE compliant (in combination with roller tables), BG dust-tested, Type-tested, Electrical control cabinet integrated into the machine stand, Emergency stop device Processable Timber Dimensions Saw Unit • Saw blade diameter: Ø 550 mm • Carbide saw blade, Z = 60 teeth, WZ20° • Saw blade bore: 80 mm Nominal Cross-Sections (without board curvature) • Max. 750 × 50 mm • Or 710 × 75 mm • Or 660 × 100 mm • Or 570 × 125 mm • Or 450 × 150 mm • Or 260 × 175 mm Permissible timber curvature in all directions: max. 3 mm per meter of length, or max. 10 mm over the entire length. • Minimum end length: approx. 10 mm • Wood species: softwood / hardwood / wood-based materials • Working height: approx. 850 mm Equipment and Technical Data • Powerful saw motor: 5.5 kW • Saw kerf on the right-hand side • Pneumatically lowered safety shield, pivoting away for easier access to the cutting area • Operating voltage: 400 V / 50 Hz Pneumatic and Extraction Requirements Crodpszki Uiefx Anmjf • Minimum air pressure: 6 bar • Extraction air velocity: approx. 30 m/s Extraction Connections • Lower housing outlet: 120 mm • Upper guard outlet: 120 mm • Extraction volume: approx. 2,600 m³/h • Weight: approx. 500 kg Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: used, Year of construction: 2016, machine/vehicle number: IDC000246, saw blade diameter: 700 mm, cutting height (max.): 225 mm, power: 13.5 kW (18.35 HP), Wood Optimizing Cross-Cut Saw Crsdozkim Sspfx Anmef Manufacturer: WEINIG / WEINIG DIMTER OptiCut S60 Year of Manufacture: 2016 (fully serviced in 2026) Professional optimizing cross-cut saw for precise and efficient wood processing. Applications: Pallet manufacturing Wooden packaging production Furniture manufacturing Sawmills and carpentry workshops Technical Specifications: Max. cutting height: 225 mm Saw blade diameter: 700 mm Saw motor: 13.5 kW Positioning drive: 5.1 kW Material length: 400–6300 mm Material width: 40–300 mm Material thickness: 15–225 mm Finished length: 80–4800 mm Features: Automatic measuring and positioning Automatic feeding with 9-row cross conveyor Laser length detection Pneumatic workpiece clamping Touchscreen control Positioning accuracy up to ±1 mm Workpiece weight up to 250 kg High productivity and reliable WEINIG quality

Year of construction: 1998, condition: ready for operation (used), spindle motor power: 11,000 W, spindle speed (max.): 6,000 rpm, This Weinig Unicontrol 10-5 was manufactured in 1998. A robust used window manufacturing machine, it features a working width of 40-220 mm and motor powers up to 15 kW for various machining units. It includes advanced features like a synchronization device, electronic height adjustment, and an automatic turning system for efficient one-man operation. If you are looking to get high-quality milling capabilities, consider the Weinig Unicontrol 10-5 machine we have for sale. Contact us for more information. • Capacities • Working width: 40–220 mm • Working height (longitudinal machining): 40–100 mm • Working height (cross machining): 40–100 mm (counter wood height 80 mm) • Workpiece length (longitudinal): min. 220 mm + 2 x tenon length Cjdpfx Asx S Sk Esnmerf • Workpiece length (cross): min. 275 mm + 1 x tenon length with 320 mm tool diameter • Feed (cross machining) • Motor power: 0.3 kW • Feed speed: 3–25 m/min • Workpiece clamping: 2 clamping claws • Length stop: with scale and reading magnifier for frame or sash outer dimensions • Counter: pneumatically clocked, 4 positions (not for studio windows), up to wood height max. 80 mm • Double part package: single or double part feeding, with cross separation and retention system • 1st piece (lying on the stop) wood width: 55–90 mm • 2nd piece wood width: 130 mm • Feed (longitudinal machining) • Motor power: 2.2 kW • Feed speed: 4–18 m/min (infinitely variable via frequency converter) • Feed roller spacing: 100/120 mm • Feed roller width: 30/50 mm • Feed roller diameter: 95 mm • Machining units • Crosscut saw • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 2800 rpm • Tool swing: max. 400 mm • Axial adjustment: pneumatic against 4-fold turret • 1st spindle with tenon and slot • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 3250 rpm • Tool swing: max. 320 mm • Tool clamping length: 320 mm • Axial adjustment range: 240 mm • Number of tools: 4 x 80 mm • Axial adjustment: hydraulic • 1st profiling spindle • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool zero swing circle: 130–140 mm • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • 2nd profiling spindle • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool zero circle: 130–140 mm • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • Mechanical spindle brakes • For profiling spindle(s) • For crosscut saw and profiling/sawing units • Profile milling unit (horizontal, top; in front of last profiling spindle) • Radially indexed: 2 positions • Axially indexed: 2 positions • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 5850 rpm • Tool swing: 130 mm • Tool clamping length: 40 mm • Axial adjustment range: 52 mm • Radial adjustment range: 125 mm • Profile milling unit (vertical, right; at end of machine) • Radially indexed: 2 positions • Axially indexed: 2 positions • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 5850 rpm • Tool swing: 210 mm • Tool clamping length: 160 mm • Axial adjustment range: 90 mm • Radial adjustment range: 100 mm • Length tenoning and slotting spindle (640 mm tool clamping length, instead of 320 mm spindle) • Motor power: 15 kW • Spindle speed: 2925 rpm • Number of tool positions: 8 x 80 mm

Condition: ready for operation (used), Year of construction: 2007, This DIMTER PROFIPRESS L2500 was manufactured in 2007. A robust used gluing press, it features a press bed of approximately 2500 x 1300 mm and a stable base frame. It includes a motor-driven multifunctional pusher and an automatic gluing station with a precision glue head. Ideal for both softwood and hardwood, it ensures even pressure distribution and high vertical pressure for low offset. Contact us for more information about this machine. • Workpiece capacity: • Lamella widths (for panels): 30–150 mm • Thicknesses: 11–60 mm • Input length: 800–2500 mm • Panel width: variable, up to max. 1300 mm • Filling width per cycle: min. 650 mm / max. 1300 mm • Max. filling area per cycle: 3.25 m² • Note: Max. usable press width depends on individual lamella widths • In multi-lane operation, filling widths may vary by max. 15 mm • Minimum contact surface per press filling: ≥ 100 cm² • Press performance: • Specific pressing pressure (at 2500 x 60 mm): up to 1.6 N/mm² • Press bed and construction: • Press bed area: approx. 2500 x 1300 mm • Stable base frame with lower press table in stainless steel (ground electrode) • Upper pressure plate with hydraulic motor “anti-reb” feature for high vertical pressure and low offset • Special hydraulic pressure elements ensure even pressure over the joint and compensate tolerances • Quick-change stop ruler sets for panel thicknesses 19–40 mm; hydraulically movable to the current filling width • Integrated hydraulic unit for press force and hydraulic motors • Electrical: • Operating voltage: approx. 400 V / 50 Hz • Electrical connection value of press (without options): 7 kW • Electrical connection value for 40 kW HF generator: 56 kW • Controls and safety: • Control cabinet and control panel • Protective cover Additional equipment • Collection table extended to 3700 x 1300 mm (with stainless steel wood support) • Motor-driven multifunctional pusher • Additional individual pressure elements from above Credpfxsx D I Nrs Anmef • Automatic gluing station with precision glue head • Feed system for different widths • Camera • Washing and rinsing device for glue head • Modem with software for online connection

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, We offer for sale a high-quality WEINIG Dimter OptiCut S 50 optimizing cross-cut saw, a reliable and precise solution for automated wood cutting and defect optimization. The machine is designed for efficient processing of solid wood, ensuring high productivity, accuracy, and material optimization. Key Features & Benefits Manufacturer: WEINIG Dimter GmbH & Co. KG (Germany) Model: OptiCut S 50 Year of manufacture: 2016 Optimizing cross-cut technology for maximum yield Automatic defect detection and cutting optimization Ideal for joinery workshops, sawmills, and industrial wood processing Technical Specifications General Voltage: 400 V Frequency: 50 Hz Machine No.: 6978.14 Material Dimensions Max. workpiece length: up to approx. 6,300 mm Width: approx. 20 – 300 mm Thickness: approx. 10 – 120 mm Max. workpiece weight: approx. 60 kg Cutting Performance Minimum cutting length: approx. 10 mm High-speed cross-cut optimization for defect removal and yield maximization Machine Configuration Feeding System Infeed table approx. 6.3 m Automatic width detection (up to 290 mm) Laser photocell for defect recognition Automatic optimization and ejection of defects Basic Machine OptiCut S 50 unit Motor power: approx. 7.5 kW Side pressure device with rollers Crodpfxozgr Nbs Anmof Outfeed System Outfeed table approx. 2.4 m Control System WEINIG OptiCom Pro control unit Extraction & Utilities Air consumption: approx. 150 Nl/min Extraction speed: min. 30 m/s Electrical total connection: approx. 9 kW Advantages Precise and efficient cutting with minimal waste Automated process reduces manual labor Proven WEINIG quality – durable and reliable Suitable for continuous industrial use Additional Information Made in Germany CE certified Well-maintained industrial machine

Condition: like new (used), spare parts + accessories Rex + Kupfermühle + GreCon + Dimter + Cook Bolinders various in stock Kupfermühle Rex Dimter Grecon Crodpfx Aslifbdenmsf Cook Bolinders

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, saw blade diameter: 700 mm, saw drive: 15,000 W, power of the servo motor: 11,000 W, Machine completely overhauled / as new with new electrics new Siemens S7 control system Completion upon order Crosscutting machine with chalk mark detection Crsdpfxev Diy As Anmsf Wood cross-sections 430x30 / 300x150 / 200x200 DIMTER OptiCut 602 R Saw blade diameter 650/700 mm Feed speed 120 m/min Saw motor 15 kW SEW servo drive 11.00 kW with inverter electric thickness adjustment

Condition: ready for operation (used), Glue application unit with 2 rollers - Glue specification for package height 300mm using 1 application roller and 1 dosing roller - 1 x left - 1 x right Credoht Rtaopfx Anmsf - Suitable for DIMTER HK 200 + HK 400 + HK 800 + HK 1000 Spare parts Dimter Accessories dimmer

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: SK-K-24001, Optimizing cross-cut saw line with scanner Manufacturer: Dimter Type: OptiCut 450 Year of manufacture: 2015 Crodpfx Anjwya Syemef Item no.: SK-K-24001 DIMTER cross-cut saw line with 1 x OptiCut 450 and F 100 feeding system with LuxScan CombiScan+ C 200 and curvature measurement The line was in operation until 2024, has been professionally dismantled and can be viewed.