Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 20001901, type of input current: three-phase, overall weight: 990 kg, input voltage: 400 V, total width: 1,780 mm, total length: 2,130 mm, total height: 3,070 mm, volume flow: 14,000 m³/h, filter area: 189 m², suction capacity: 14,000 m³/h, power: 15 kW (20.39 HP), input frequency: 50 Hz, input current: 26 A, intake vacuum (max.): 48 mbar, actuation type: electric, ESTA DUSTMAC F-189 industrial welding fume extraction/filtration unit for sale. Suitable for extracting and filtering welding fumes and dust from multiple extraction points, welding booths, or large capture hoods. Main technical specifications: - Manufacturer: ESTA - Model: DUSTMAC F-189 - Year: 2020 - Serial No.: 20001901 - Filter surface area: 189 m² - Number of filters: 9 pcs - Max. airflow rate: approx. 14,000 m³/h - Max. negative pressure: approx. 4,800 Pa - Main fan motor power: 15 kW - Voltage: 400 V / 50 Hz - Motor speed: 2945 rpm - Current: 25.9 / 15 A (according to the motor nameplate) Gusdpfxszuwqts Amyeg - Approx. dimensions: 2,130 x 1,780 x 3,070 mm - Weight: 990 kg (according to the nameplate) The unit was reportedly used for approximately one year and then put into storage. Used equipment, sold as-is. Currently visible but not connected to power. Condition and completeness are shown in the photos. Location: Estonia. Loading: Forklift capability is available on-site. We can load the equipment onto the buyer’s truck. Transport: Transportation costs are the responsibility of the buyer.

Condition: excellent (used), pneumatically operated, water-cooled spot welding pliers with manual control valve Manufacturer: DALEX, Type 3238 Rated power at 50% duty cycle: 16 kVA Secondary short-circuit current: 13.5 kA Electrode force: 270 daN Arm spacing: 130 mm Arm extension: 500 mm with double-acting cylinder: long stroke 75 mm, pre-stroke 50 mm, working stroke 0-25 mm with universal joint suspension and clamping bow 10 m connection cable with control cable Gsdsz Ak H Depfx Amyjug also included: 1 piece DALEX synchronous control unit RS 12 with 3 m connection cable and 32 A CEE plug

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 701, The electrode drying oven SET-50/4 features 4 shelves, each with 5 separate compartments for electrodes, allowing for organized storage of various electrode types. The capacity of the device is sufficient for the contents of approximately 50 packages of stick electrodes. The housing and door are double-walled and well-insulated. The device has a thermostat with an indicator light, allowing the drying temperature to be adjusted continuously up to 400 °C. Gedpfx Aoz Ahcijmyjug The interior, including the shelves, is made entirely of stainless steel. Upon request, we can include an analog thermometer with a display range of 0-400 °C. Thanks to all these features, the SET-50 is the ideal device for stationary applications. It is delivered without a power cable and plug. Capacity: up to 250 kg of electrodes Dimensions in mm: 1080 x 740 x 810 Weight: 65 kg Temperature: 400 °C Heating power: 3700 watts Input voltage: 230 V 50 Hz

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 26,787 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: FANUC, laser type: CO₂ laser, laser source manufacturer: FANUC, laser power: 4,000 W, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, type of cooling: water, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, fume extraction, safety light barrier, Amada Alpha LC2415NT 4 kW laser cutting system with loading and unloading unit, as well as storage tower with 7 storage positions (LKI). Suitable for both single-part and high-volume production. Regularly serviced by technicians; condition according to operating hours is very good. The chiller unit is equipped with a connection for heat recovery. The system has been dismantled, stored in an external warehouse, and can be inspected at any time. Maximum sheet size: 3000x1500mm. Gsdpfx Ameyfl U Neysug

Condition: good (used), Year of construction: 2016, functionality: fully functional, working range: 6,000 mm, sheet thickness (max.): 30 mm, working width: 2,000 mm, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 150 mm, type of cooling: water, We are offering this well-maintained MicroStep MasterCut Compact 6001.20P plasma cutting machine, manufactured in 2016. Manufacturer: MicroStep Model: MasterCut Compact 6001.20P Working area: 6000x2000 mm Year of manufacture: 2016 Condition: good Plasma source: Kjelberg Hi Focus 161 neo Cutting range: sheet metal thickness 1-30 mm The machine is in operation and can be inspected. The machine has been serviced annually by Microstep. Includes dust extraction system Donaltson Torit DCE. Machine available from September. Gedpfx Amszt Imisyoug If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 32,500 h, machine/vehicle number: A0225A0106, control type: CNC control, laser power: 3,200 W, We are offering for sale a reliable and fully functional CO2 CNC laser cutting machine, the Trumpf TruLaser 3030 (3200W). This machine is an excellent choice for job shops, metal fabrication companies, or as a cost-effective backup solution to boost your production capacity. Gjdpfszfgnvsx Amyjug Up time : 32500 Laser on time : 12550

Condition: good (used), Year of construction: 2019, functionality: fully functional, Brand: Grotius Control system: Linux CNC Working area: 3000 x 1500mm Length (mm): 4020mm Width (mm): 2330mm Guedpfx Amjzupvusysg Height (mm): 1570mm Description: Includes Thermal Dynamics A40i plasma source & various wear parts.

Condition: used, Year of construction: 2016, BEVEL head - 5 axes SIDEROS table with dimensions 4000 x 6000 mm SIDEROS ECO16CT external filter Guedpfx Amezw Nmxjyjg COLLECTION BY SEPTEMBER 2026

Condition: good (used), Year of construction: 2017, functionality: fully functional, • Baykal BPL-H 4012 • Supplied new in 2017 • Hypertherm XPR300 AutoGas • EDGE Connect CNC • Twin plasma heads • Arc hours: 2,016 and 3,120 Guodpfezp D S Tsx Amyog • 4 m x 12 m bed

Condition: good (used), functionality: fully functional, Year of construction: 2006, The machine is being sold due to a plant modernization. Only 3,000 operating hours for laser cutting. Immediately available. Inspection and demonstration under power are possible by appointment. Technical data: Manufacturer: TRUMPF Model: TruLaser Tube 5000 (T01) Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Laser type: CO₂ laser TruFlow Godpezlr Rpjfx Amysug Working area, tube length: 6,500 mm Max. round tube diameter: 150 mm Max. rectangular profile / circumscribed circle: 150 mm Max. material weight: 20 kg/m Max. workpiece weight: 130 kg Automatic tube support Self-centering clamping system

Condition: used, Year of construction: 2008, throat depth: 680 mm, nominal power at 50% duty cycle: 45 kVA, input voltage: 400 V, Combined roll seam and spot welding machine, type UN63 - Roll seam welding - Rated voltage 400V/50Hz - Rated power 45kVA - Welding current 15kA - Fuse rating 125A - Overhang 670mm - Upper roller diameter 175mm - Lower roller diameter 120mm - Arm distance 350mm Gujdpszh Izcjfx Amyjg - Electrode force 500daN - Stroke approx. 30mm - TE500 control unit with 99 welding programs, parameters for each program, digital current display after each weld, current monitoring, stepper function, Language selection: German, English, Italian, French, etc., with operating manual - 2-stage foot switch according to UVV standards - Machine main switch - Pneumatic maintenance unit - Weight approx. 680kg - Documentation with circuit diagram, compressed air diagram, and cooling water circuit - VAT can be shown separately - Spot welding fixture / electrode holder and lower arm available at an extra cost. The machine is located in Dresden, near the A17 highway, and can be inspected and demonstrated by appointment. On-site commissioning is subject to a fee, billed according to actual effort.

Condition: used, Year of construction: 2018, functionality: fully functional, type of input current: three-phase, overall weight: 95 kg, input voltage: 400 V, volume flow: 1,100 m³/h, pressing: 2,250 Pa, power: 1.1 kW (1.50 HP), input frequency: 50 Hz, Equipment: type plate available, KEMPER ProfiMaster IFA welding fume extraction system – year of manufacture 2018 – 400 V Currently, 2 units are in stock! 1x 3m arm + 1x 4m arm Manufacturer: KEMPER Model: ProfiMaster IFA Year of manufacture: 2018 For sale is a used, fully functional KEMPER ProfiMaster IFA welding fume extraction system. This unit is ideally suited for extracting welding fumes and grinding dust directly at the source and is designed for professional use in workshops and metalworking. The system is in good condition. The filter was replaced on October 6, 2025, making the unit immediately ready for use. Technical data: Airflow: 1,100 m³/h Power supply: 400 V / 50 Hz Motor power: 1.1 kW Rated current: 2.3 A Max. negative pressure: 2,250 Pa Gsdpfx Aozg T A Aomyeug Protection class: IP42 Control: 24 V Weight: 95 kg Continuous operation: 100% duty cycle IFA-tested version Equipment: 3m arm length Mobile version Filter monitoring Easy filter replacement via maintenance flap Robust industrial design Ideal for welding workstations Condition: Used Technically flawless Filter insert new as of October 6, 2025 Safety inspection valid until 2026, according to the inspection sticker All information is subject to change without notice.

Condition: good (used), Year of construction: 2017, operating hours: 12,900 h, functionality: fully functional, machine/vehicle number: 20170777, repeat accuracy: 0.03 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.06 mm, type of input current: three-phase, input voltage: 400 V, operating pressure: 4,000 bar, power of the servo motor: 37,000 W, feed length X-axis: 4,000 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 200 mm, total height: 3,500 mm, total length: 6,200 mm, total width: 3,200 mm, water pressure: 4,000 bar, control cabinet height: 1,950 mm, compressed air connection: 7 bar, pump pressure: 4,000 bar, control cabinet width: 800 mm, overall weight: 7,500 kg, product height (max.): 200 mm, input frequency: 50 Hz, power: 37 kW (50.31 HP), Equipment: safety light barrier, Waterjet cutting system Perndorfer type WSS4020, table size 4000/2000 mm, high-pressure pump BFT Ecotron with 37 kW and 4000 bar cutting pressure, 3D cutting head for contour cutting. The machine is used and in good condition, and has recently undergone an overhaul by the manufacturer. The machine can be inspected and tested at any time. Guodpex H Ny Tefx Amysg

Year of construction: 2020, condition: used, Mains voltage 400V, 3 Phasen, N, PE, 50 Power consumption 40 KVA Network backup 32 A Godpfx Asyu U E Njmysug PTA main flow (25% ED) 280 A Pilot main current adjustable 5 - 20 A PTA burner PT 200 S-AUT In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: good (used), Year of construction: 2008, functionality: fully functional, overall weight: 1,000 kg, total width: 155 mm, total length: 120 mm, total height: 515 mm, volume flow: 8,600 m³/h, Filtercapacity: 4.300 - 8.600 m3 per hour Filtering and collecting Smoke & Dust Country of origin: Sweden Total size LxBxH: 120 x 155 x 515 cm Gujdpfezzf Aksx Amyog Weight: 1000 kg

Condition: used, functionality: fully functional, Year of construction: 2016, laser type: fiber laser, laser source manufacturer: IPG, laser source model: YLS-2000-CUT, laser power: 2,000 W, input voltage: 400 V, input current: 15 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: cooling unit, We are offering this used IPG Laser YLS-2000-CUT. Model name: YLS-2000-CUT Serial number: 16126751 Rated voltage: 400-460 V AC 3P/PE Frequency: 50/60 Hz Rated current at full load: 15.2 A Gedpfx Aezhcvnemyoug Fuses: 20/120 A/kA Drawing number: G25-16-130212-7 Date of manufacture: December 2016 with the corresponding water chiller: IPG chiller Model LC 71.01-A.4.5/6 Date of manufacture: 2018 If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, type of input current: three-phase, overall weight: 666 kg, input voltage: 400 V, total width: 1,180 mm, total length: 1,180 mm, total height: 3,640 mm, filter area: 60 m², suction capacity: 6,000 m³/h, negative pressure: 2,300 Pa, input frequency: 50 Hz, input current: 11 A, Equipment: type plate available, CleanAirTower is an energy-efficient, stand-alone space filtration and ventilation system. The CleanAirTower space filtration and ventilation system is ideal for environments where localized fume extraction is not feasible. It is even more effective as a supplement to workstation fume and dust extraction systems. Undoubtedly, one of the device's key advantages is its impact on reducing heating costs in industrial halls. Air is drawn in, circulates around the device through a built-in fan, and then clean, warmed air is returned to the environment. Another advantage is the elimination of the need for pipeline installation. The device operates as a self-contained unit. Year of manufacture: 2023 Self-cleaning device (cleaned with compressed air during operation). Gedpfozv Nbtox Amyjug Specifications: - Motor power: 5.5 kW - Performance: 6000 m3/h - Max. vacuum: 2300 Pa - Sound pressure level: 72 dB(A) - Number of filters: 3 - Filtration area: 60 m² - Dimensions (L/W/H): 1180 mm x 1180 mm x 3640 mm - Weight: 666 kg Stock number: 0009

Condition: like new (used), Year of construction: 2022, operating hours: 238 h, functionality: fully functional, machine/vehicle number: PR5-2500-07221514, type of input current: AC, sheet thickness (max.): 22 mm, overall weight: 1,000 kg, input voltage: 230 V, total width: 2,200 mm, total height: 1,500 mm, total length: 3,800 mm, cutting height (max.): 120 mm, table length: 2,500 mm, working width: 1,250 mm, table width: 1,250 mm, cutting current: 105 A, working length: 2,500 mm, input current: 6 A, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 120 mm, type of cooling: water, height adjustment type: electric, input frequency: 60 Hz, Equipment: documentation/manual, Swift-Cut PRO 2500 MK5 CNC Plasma + Hypertherm 105 (LIKE NEW / 238h) 🇬🇧 ENGLISH DESCRIPTION: Condition: LIKE NEW (Only 238 operating hours, approximately 1 month of actual use). Availability: Immediately available. We offer a top-of-the-line CNC plasma cutting machine, the Swift-Cut PRO 2500 MK5 (UK, 2022). In perfect technical and visual condition, ready for immediate production. Equipped with a highly efficient Hypertherm Powermax 105 and a water table. Key Technical Specifications: - Cutting area (L x W): 2500 x 1250 mm - Z-axis clearance: 120 mm - Plasma source: HYPERTHERM Powermax 105 - Table type: Water table - Power supply: 110-230 VAC; 50/60 Hz Software Included: - CNC Controller - 2D Design: Solid Edge 2D - Nesting: SigmaNEST Companion Advanced Features & Equipment: - Soft Sense (IHS): Accurate piercing and cutting height control - DTHC: Dynamic and automatic voltage correction - XYZ Torch Protection: Advanced collision protection (Magnetic head) - Laser pointer for easy positioning - Precision linear rails and planetary gears Transport & Logistics (Our HUGE Advantage): - FREE Loading: Professional and safe loading included! - Transport Assistance: We assist in organizing fast and cost-effective transport in Europe. - Video of the machine in operation available upon request; on-site testing welcome. 🇩🇪 DEUTSCHE BESCHREIBUNG: Zustand: WIE NEU (Nur 238 Betriebsstunden, ca. 1 Monat Nutzung). Verfügbarkeit: Sofort verfügbar. Wir bieten eine erstklassige CNC-Plasmaschneidanlage Swift-Cut PRO 2500 MK5 (UK, 2022). Perfekter technischer und optischer Zustand, sofort einsatzbereit. Mit hocheffizienter Hypertherm Powermax 105 und Wassertisch ausgestattet. Wichtigste technische Daten: - Schneidbereich (L x B): 2500 x 1250 mm - Z-Achsen-Freiraum: 120 mm - Plasmaquelle: HYPERTHERM Powermax 105 - Tischart: Wassertisch Inklusive Software: - CNC-Steuerung - 2D-Design: Solid Edge 2D - Nesting: SigmaNEST Companion Erweiterte Funktionen & Ausstattung: - Soft Sense (IHS): Genaue Einstech- und Schnitthöhe - DTHC: Dynamische Spannungskorrektur während des Schneidens - XYZ Torch Protection: Fortschrittlicher Kollisionsschutz (Magnetischer Kopf) - Laserpointer zur einfachen Positionierung - Präzise Linearschienen und Planetengetriebe Transport & Logistik (Unser GROSSER Vorteil): - KOSTENLOSER Ladevorgang: Fachgerechtes Verladen im Preis inbegriffen! Gedeztu Aqjpfx Amysug - Transportunterstützung: Wir helfen bei der Organisation des Transports in Europa - Ein Video im Betrieb ist auf Anfrage erhältlich, Vor-Ort-Test möglich

Condition: good (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2020130, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cypcut, laser type: fiber laser, laser source manufacturer: IPG, laser power: 2,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,050 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 150 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, cutting speed: 13,000 mm/min, positioning speed: 80 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, power: 26.5 kW (36.03 HP), input voltage: 400 V, input frequency: 50 Hz, overall weight: 5,000 kg, Equipment: documentation/manual, dust extraction, fume extraction, CYPCUT - CYPTUBE, auto-center positioning, pneumatic clamping, automatic alignment device, automatic clamping device, cutting head incl. protective glass, Raytool / SWISS, laser source - IPG / Germany, software for 3D tube and profile cutting, automatic loading system for tubes and profiles, extraction unit Filtercube 2H, 4 kW, 50 m² Gedpfsy Efbkjx Amyjug

Condition: used, Year of construction: 2008, functionality: fully functional, overall weight: 420 kg, iDEAL BAS 065-11 is a resistance butt welding machine for band saw blades, made in Germany by IDEAL-Werk C.+E. Jungeblodt GmbH + Co., Lippstadt. Serial no. 235529, year of manufacture 2008. Rated power 20 kVA at 50% duty cycle, primary voltage 400 V, 50/60 Hz, secondary voltage 2.5 – 4.0 V, maximum upsetting force 50 kN. Hydraulic clamping (the "-11" version): both clamping jaws are operated hydraulically by foot switch, so the operator keeps both hands free to position the blade. The hydraulic power unit with clamping pressure gauge is mounted on the machine. Welding current is selected with the step switch, flashing speed and annealing time are set on the front control panel, with a Panasonic timer for the annealing cycle. A flexible work light is fitted above the welding zone. Capacity: bi-metal band saw blades 10 x 0.7 – 41 x 1.6 mm, wood band saw blades 10 x 0.7 – 60 x 1.0 mm, stainless steel band saw blades 10 x 0.4 – 35 x 0.8 mm, band knives 10 x 0.4 – 40 x 0.8 mm, strip steel 7 – 100 mm2 cross-section (stainless up to 50 mm2), band thickness 0.4 – 2.5 mm, clamping width 60 mm. The machine is used, in working condition and repainted. Electrical cabinet, hydraulics and controls are shown in the photographs. Machine weight approx. 420 kg net / 480 kg gross, packing dimensions approx. 1150 x 1150 x 1150 mm. Make and Model: iDEAL BAS 065-11 Year of manufacture: 2008 Serial no.: 235529 Clamping: hydraulic, foot switch operation Max. upsetting force: 50 kN Voltage: 400 V Frequency: 50/60 Hz Power: 20 kVA (at 50% duty cycle) Secondary voltage: 2.5 – 4.0 V Fuse protection: 20 A Bi-metal band saw blades: 10 × 0.7 – 41 × 1.6 mm Wood band saw blades: 10 × 0.7 – 60 × 1.0 mm Gsdpfezz Sdzox Amyeug Stainless steel band saw blades: 10 × 0.4 – 35 × 0.8 mm Band knives: 10 × 0.4 – 40 × 0.8 mm Strip steel, cross-section: 7 – 100 mm² (stainless up to 50 mm²) Band thickness: 0.4 – 2.5 mm Clamping width: 60 mm Machine weight: approx. 420 kg net / 480 kg gross Packing dimensions: approx. 1150 × 1150 × 1150 mm Condition: Used, in working order

Condition: excellent (used), Year of construction: 2021, • Baykal BPL-H 4012 • Supplied new in 2021 • Hypertherm XPR300 AutoGas Gedpfxszp D T Dj Amyjug • EDGE Connect CNC • Twin plasma heads • Arc hours: 3,480 and 5,448 • 4 m x 10 m bed

Condition: used, Year of construction: 2021, SIDEROS ORION 2 table with scraper, year 2014. Table dimensions: 2600 x 12000 mm. New cutting head. MESSER MULTITHERM 4000 oxy-fuel cutting machine, year 2008. PROFIMEC external filter. Godpfx Amszw H Igoyeug TO BE COLLECTED BY SEPTEMBER 2026.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 22,400 h, machine/vehicle number: A0312L0169, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser hours: 13,270 h, laser power: 4,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, type of cooling: water, compressed air connection: 7 bar, overall weight: 9,700 kg, total length: 9,310 mm, total width: 7,813 mm, total height: 2,300 mm, year of last overhaul: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, We are offering this used TRUMPF TruLaser 2030 laser cutting machine, manufactured in 2018. Type: L82 Machine No.: A0312L0169 Gjdpfozmrpzjx Amyoug Year of Manufacture: 07-2018 Laser Power: 4000 W Power Supply: 400 V / 50 Hz Connected Load: 37.0 kVA Control Voltage: 24 V Required Fuse Rating: 3 x 63 A Compressed Air Connection: 7–12 bar Nitrogen Connection N2: 27 bar Oxygen Connection O2: 15 bar If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: PL260-091, type of input current: three-phase, input voltage: 380 V, total width: 4,500 mm, total length: 7,500 mm, total height: 1,500 mm, type of cooling: water, overall weight: 9,100 kg, cutting current: 260 A, sheet thickness steel (max.): 38 mm, open-circuit voltage: 380 V, working range: 60 mm, table length: 6,000 mm, table width: 3,000 mm, working width: 3,000 mm, For sale: AKYAPAK HPR 260 industrial CNC machine for thermal cutting of sheet material, manufactured in 2013. Guedpozibqajfx Amyog The machine is of the gantry type, with a working area of 3000 × 6000 mm, suitable for cutting large-format steel sheets. It is equipped with a Hypertherm HPR260 / HPR260XD plasma system, Hypertherm MicroEDGE Pro / Edge Pro CNC control interface, as well as equipment for oxy-fuel cutting. The machine is suitable for the production of metal structures, plates, flanges, blanks, sheet steel parts, and for heavy industrial applications. Key technical specifications: Parameter Data Manufacturer AKYAPAK Model HPR 260 Machine type CNC plasma and oxy-fuel cutting machine Year of manufacture 2013 Machine serial number PL260-091 Working area 3000 × 6000 mm CNC control Hypertherm MicroEDGE Pro / Edge Pro Operating system Windows XP Plasma source Hypertherm HPR260 / HPR260XD Plasma serial number 260XD-004364 Plasma output current 260 A Duty cycle 100% Machine nameplate power 60 kW Power supply 380 V / 50 Hz Weight 9010 kg Origin Turkey CE marking Yes Equipment and features The machine includes: CNC gantry structure; working table 3000 × 6000 mm; Hypertherm HPR260 / HPR260XD plasma system; Hypertherm MicroEDGE Pro / Edge Pro CNC control; Hypertherm gas console; gas regulators; plasma cutting torch; oxy-fuel cutting head; torch height control; slotted table with slats; fume extraction / aspiration system through the table; operator console with joystick, Start/Stop, emergency stop, and manual modes. Cutting capacity The Hypertherm HPR260 plasma system is a 260 A industrial system for high-quality plasma cutting. Approximate capacity for mild steel: production piercing: approximately 32–38 mm, depending on the material, gases, and settings; maximum cutting from edge: up to approximately 60–64 mm; oxy-fuel cutting allows for working with thicker steel sheets, depending on the settings, nozzles, and gas equipment.

Condition: used, Year of construction: 2020, functionality: fully functional, type of input current: three-phase, sheet thickness steel (max.): 80 mm, table length: 6,000 mm, working width: 3,000 mm, table width: 3,000 mm, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,000 mm, Equipment: documentation/manual, CNC Plasma Cutting Machine 6000x3000 mm – Messer MetalMaster Xcel 6030 – Hypertherm XPR300 – Bevel Head CNC Plasma Cutting Machine Messer MetalMaster Xcel 6030 General Information • Manufacturer: Messer Cutting Systems year of manufacturing 2020 • Model: MetalMaster Xcel 6030 • Machine Type: CNC Plasma Cutting Table • Condition: Used – good working condition • Availability: Immediate available Working Area • Cutting table size: approx. 6000 × 3000 mm Plasma System • Plasma power source: Hypertherm XPR300 High-definition plasma system for precise and high-speed cutting of carbon steel, stainless steel, and aluminum. Equipment / Options • Bevel cutting unit: BEVEL-R (5-axis bevel cutting system) for weld preparation and angled cuts • Software: OmniWin – programming and nesting software for optimized material usage Dust extraction system • BEUTING PFM3-9 (100 L extraction unit Gsdpfeyx Svbox Amysug Machine Advantages • Robust industrial gantry construction • High precision and productivity • Bevel cutting capability for complex parts • Efficient nesting and programming via OmniWin software • Suitable for heavy steel fabrication and industrial production Applications • Structural steel fabrication • Industrial metal cutting • Manufacturing of machine components and steel constructions Additional Information Sold as it is dismantling and shipping not included. Machine can be inspected under power by appointment. Further technical details, photos, and videos available on request.