Laser cutting machine

Dynamic Power Laser DPL-TUBE-GC6040/5/7

Condition: new, Year of construction: 2025, functionality: fully functional, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. Bjdpfx Asrq D Nioqteli The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Condition: new, Ostas 3-Roll Round Bending Machine SMR-S 2070 x 190 Technical Specifications: Special equipment included in the price: Motorized adjustment of the lower rolls Hardened rolls Motorized adjustment of the rear rolls Digital display Sheet metal width 2070 mm Sheet metal thickness 7.0 mm max. Sheet metal thickness for initial bending 6.0 mm Roll length 2070 mm Smallest diameter 285 mm Roll diameter 190 mm Weight 3480 kg Dimensions L-W-H 3750 x 920 x 1260 mm Motor 4 kW Equipment: Top and bottom rolls electrically driven Top roll can be swung out Conical bending device Blodpfx Aog Nz T Isqtoi Asymmetrical roll arrangement Self-braking main motor Separate control and operating panel Safety cable, CE marking

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Pressure: 225 t Bending length: 4050 mm Control: DA 69 TW Oil capacity: 400 l Total power requirement: 17 kW Machine weight approx.: 18,100 kg Bedoyz S Ngepfx Aqteli Dimensions: 5700 x 2610 x 3300 mm

Condition: new, Year of construction: 2026, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 Blodpfx Aqeuzv Tzstei guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: LU0183, Roll forming line for solar profiles, both for trackers and fixed structures. High processing speed, with mechanical press and 10 CNC-controlled punching tools. Working speed up to 30 m/min. Working thickness from 0.8 to 3.0 mm and maximum strip width 450 mm. Bodjwxfbwepfx Aqtjli

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Maximum bending length: 6100 mm Bjdpfx Aeyr N Rbeqteli Bending force: 400 tons Motor power: 30 kW Voltage: 380 V Oil capacity: 400 liters Dimensions (L x W x H): 7750 x 2850 x 3400 mm Weight: 31750 kg

Condition: new, Year of construction: 2025, Standing seam roof panel machine F3-39 (1.5 inches) Standing seam roof panel machine F3-39 logically complements the line of machines for double standing seam roof panels production we make. In Europe, the most common is 25 or 27mm lock high, but outside of Europe, in some parts of America and Canada regions seam metal roofing with 39mm lock high is also popular. That is why our company decided to start production equipment for such task, to expand sales geography, and to bring our products to more and more customers who may need it. Metal roof machine F3-39 has additional rolls for clip-relief rolling, which come as standard set of machine supply. Clip-relief is a small bend locating closer to the locks of panel and which make possible to hide fixation clips under the panel. Standing seam machine F3-39 has 8 pairs of main rolls to make the main part of the lock and a ninth stand to make clip-relief part. The rollers and base of machine are stronger comparing to standard version of equipment – roof panel roll forming machine F3. It has also rolls of bigger diameter to make 39mm (1.5 inches) lock. Bodeq U N T Rspfx Aqtsli Despite all these increases, standing seam roof panel machine F3-39 is portable one, our customers can directly take it to construction place, and you can use it at the roof installation site as well. Thus giving the customer opportunity to reduce number of panel’s damages and the transportation cost. There is drawing of panel you can get with our F3-39 machine Roof panel roll forming machine F3-39 can make panels with clip relief or without it, depends on customer preferences. Machine can work with coated materials or without coating as well. Suitable for steel coils, copper aluminum, zinc etc. It’s possible to adjust gaps between rollers depends on material thickness customer use for forming. Standing seam metal roof machine has easy adjustable system to change the width of the panels. The machine operator just need to rotate adjusting wheel to make it happens As additional options you can get Length measuring device to set up number and lengths of panels; Cross cutting knife for metal cutting; Rolls for ribbed panels production; Floor decoiler; Hand seamers for lock closing; Sliding clip formers; Fixed clip former. Our company can produce other machines for metal roofing production: Standing seam metal roof machine F3 for 25mm lock high; Standing seam machine F3-27 for 27mm lock high; Snap lock roof panel machine SL-1; Automatic snap lock metal roofing panel machine SL-1 auto;

Condition: used, Year of construction: 2001, pressure 70 -800 kN chamfer lenght 2505 mm distance between columns 2125 mm Control OP 2000 controlled axis 7 throat 420 mm stroke 200 mm dayligth 470 mm table width 60 mm table height 960 mm ajustment speed 100 mm/sec working feed 10 mm/sec return speed 100 mm/sec weight of the machine ca. 6,3 t Bjdpsyz Dgwjfx Aqtjli Patented Amada technology ensures absolutely correct bending results without bombing device

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 08127-QB438P, functionality: fully functional, operating hours: 579 h, power: 30 kW (40.79 HP), input voltage: 380 V, input frequency: 50 Hz, stroke length: 6,100 mm, operating speed: 80 mm/s, reverse speed: 80 mm/s, table height: 1,000 mm, throat depth: 1,500 mm, total length: 7,500 mm, total width: 2,450 mm, total height: 3,350 mm, overall weight: 31,760 kg, controller manufacturer: Delem, controller model: DA-66T, working width: 6,100 mm, bending force (max.): 320 t, distance between stands: 5,090 mm, installation height: 3,350 mm, control type: CNC control, degree of automation: automatic, number of axes: 6, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, centralized greasing system, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, upper tooling, Ermak Power-Bend Pro 6100 x 320. Only 580 hours used. As new. Very good and big machine. We not use the machine much anymore, we can create space. Blodpfx Aeyhnfieqtsi Year 2012, 6 axes, Delem Control. Wila quick tool clamping system. We have several tools available as well.