Condition: new, number 102 Positionen Bwsdpsyv I Hdofx Ap Ijw weight 320 kg condition neu 28 mm dimensions 1,0 x 0,6 x 0,85 m Special 102-piece set, 28mm system Includes tool trolley Material: Burnished high-quality steel Scope of delivery: see images

Condition: new, table length 2000 mm Bwjdsyv I Hwjpfx Ap Iow table width 1000 mm table height 900 mm table load 3000 Kg weight of the machine ca. 0,45 t dimensions 2,0 x 1,0 x 0,9 m Welding table / perforated table including accessory set WMT Basic-Set 2.0 The table is made of 25mm high-alloy, plasma-nitrided steel S355J2+N (St 52/3) Surface hardness 850 Vickers Surfaces that have been ground down and planed smooth. Hole diameter: 28mm, countersunk by 3mm 100 x 100mm grid Side panels 200mm Hole spacing in the side panels 50mm, diagonal grid Height adjustable from approx. 830 - 890mm Substructure reinforced with 140 x 15mm flat steel Including base bearings, 110mm diameter

Condition: new, table length 1200 mm Bsdpjyv I Injfx Ap Isww table width 800 mm table height 980 mm weight of the machine ca. 0.95 t Workstation - Hole diameter: 28 mm - Grid: 100 x 100 mm - Side panels: 150 mm - Panel thickness: 10 mm

Condition: new, welding current max. 250 A open-circuit voltage max. 66 Volt connected load frequency 400 V weight 65 kg Bjdpsy Aa Itsfx Ap Ieww Dimensions (LxWxH) 900 x 500 x 750 mm MIG/MAG gas-shielded welding machine: incl. 3m hose package.

Condition: used, Year of construction: 1992, table diameter 600 mm table load 250 Kg swivelling range 0 - 135 Grad turning speeds 0,03 - 2,0 U/min connected load frequency 400 V weight 0,4 t Bwsdpfxjygxzro Ap Iew Dimensions (LxWxH) 1,1 x 0,9 x 1,0 m Welding turntable including: - Foot switch - Wired remote control - 315mm chuck

Condition: new, number 70 Positionen weight 90 kg condition neu Bwedpfx Apjwth N To Ijw 28 mm Special set 70 / 28 70-piece, 28mm system, consisting of: 3x Pipe clamps D28 90° – Item No. 4028397 3x Pipe clamps D28 180° – Item No. 4028396 3x Pipe clamps D28 45° – Item No. 4028398 3x Pipe clamps D28 300x150 – Item No. 4028399 3x Pipe clamps D28 300x200 – Item No. 4028400 15x Ball lock pins D28x50 – Item No. 4027663 10x Locking pins D28x80 – Item No. 4028876 4x Universal Stop D28 100x50x25 mm – Item No. 4028469 4x Universal Stop D28 150x50x25 mm – Item No. 4028470 4x Universal Stop D28 225x50x25 mm – Item No. 4027657 2x Universal Stop D28 300x50x25 mm – Item No. 4027659 2x Stop Clamping Angle D28 75x50x75x25 mm – Item No. 4028657 2x Stop Clamping Angle D28 175x50x75x25 mm – Item No. 4028658 2x Stop Clamping Angle D28 175x50x175x25 mm – Item No. 4028649 2x Stop Clamping Angle D28 175x50x75x25 mm – Item No. 4028652 2x Stop Clamping Angle D28 175x50x175x25 mm – Item No. 4028653 2x Stop Clamping Angle D28 275x50x175x25 mm – Item No. 4028654 2x Stop Clamping Angle D28 300 x 275 x 100 mm (1x left, 1x right) – Item No. 4028847 2x flat angle D28 175x175x25 mm 1x elongated hole + 3x round hole – item no. 4028655

Condition: ready for operation (used), load capacity: 750 kg, 3-axis welding positioner, 750 kg load capacity, control panel Tilt and speed infinitely adjustable from 0.05 to 1.0 rpm Clamping plate diameter: 0.8 meters Height when tilted to center min. approx. 0.45 m + 0.1 m base, max. 1.1 + 0.1 m base Height horizontal min. approx. 0.56 m + 0.1 m base Bedpsxxvgzsfx Ap Ioww Length 2.0 m, width 1.05 m

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 1,5 t dimensions 3,0 x 1,5 x 0,9 m Bjdpfx Apjxwzd Ne Ioww Welding table with accessories - Table size: 3000x1500x200 mm - High-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Bore Ø 28 mm - Surface bores 100x100 mm grid - Corners, edges and bores chamfered at 45° - Side wall height 200 mm - Side wall bores in diagonal grid - Construction reinforced with ribs Accessories: - 6x 280610.N screw clamp - 12x 280511 quick-release bolts - 8x 280420.N universal stop - 2x 280110.N stop and clamping angle - 2x 280162.N stop and clamping angle - 1x 283999 care set

Condition: used, Emhart TUCKER ETF50R.00.54/12.5.13-25BM Bolt Welding Machine Technical Details: - Manufacturer: Emhart Teknologies (TUCKER GmbH) - Model / Type: ETF50R.00.54/12.5.13-25BM - Article Number: T045 006/400 - Voltage: 400 V, 50/60 Hz - Made in Germany Condition: Used (see pictures). Note: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. Bwjdpfx Aoxl Aguop Iew You can find more new and used items in our shop! International shipping costs available upon request!

Condition: new, welding current 10 - 200 A connected load frequency 230 V weight 6,5 kg Bwsdpfx Apsxq Hhme Iow Dimensions (LxWxH) 380 x 120 x 250 mm TIG Welder AC/DC, Pulse Demo unit in aluminum box Includes all accessories See images

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 949 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Item No.: 7D.1 Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2+N + plasma nitriding - Bore Ø 28 mm - Drilling surface in diagonal grid - Rounded corners, edges and holes - Side panel height 200 mm - Holes in the side wall in the diagonal grid - Including scaling on the surface - Structure reinforced with ribs - Grid lines allow for precise builds The welding tables are provided with a scale as standard. Plasma nitrided version : - Protection from rust/scratches/weld spatter adhesion - more corrosion resistant / higher load capacity Bwjdjxaayzepfx Ap Isw Furnishing: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - plasma nitrated extreme version with scale - Side panel + table top with diagonal grid - incl. 4x base equipment

Condition: new, table length 3000 mm table width 1500 mm table height (lateral area) 200 mm weight 1374 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Surface holes in a diagonal grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid Bwedpoxabiwjfx Ap Isw - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Extreme plasma nitrided version with scale - with diagonal grid on the table surface - Sidewall with diagonal grid - incl. 6x base equipment

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 981 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Rounded corners, edges and holes - Height of side wall 200 mm Bedpfjxab Rnjx Ap Ioww - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - Including 4x basic equipment

Condition: new, table length 2000 mm table width 1000 mm table height (lateral area) 100 mm weight 354 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Bodpfsxaacpsx Ap Isww Equipment: - 16 hole pattern / dimensions 2000 x 1000 x 100 mm - Plasma nitrided 750 version with scale - Including 4x basic equipment

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,270 h, laser type: fiber laser, laser power: 4,000 W, sheet thickness (max.): 20 mm, overall weight: 9,700 kg, year of last overhaul: 2025, The system must be dismantled between November 20, 2026, and November 22, 2026! TECHNICAL DETAILS Laser type: Fiber laser Laser power: 4,000 W Sheet metal thickness (max.): 20 mm Sheet metal thickness steel (max.): 20 mm Sheet metal thickness stainless steel (max.): 20 mm Sheet metal thickness aluminum (max.): 20 mm MACHINE DETAILS Control type: CNC control Automation level: Automatic Actuation type: Electric Power: 4 kW (5.44 hp) Input voltage: 400 V Input frequency: 50 Hz Type of cooling: Water Compressed air connection: 7 bar Laser operating hours: 13,270 h Year of last overhaul: 2025 Dimensions & Weight Dimensions (L x W x H): 9,310 x 7,813 x 2,300 mm Total weight: 9,700 kg Bwsdpfx Apjz I S Uwe Ijw EQUIPMENT CE marking Central lubrication system Cooling unit Documentation/Manual Dust extraction Emergency stop switch Fume extraction Safety light curtain

Condition: used, Year of construction: 2021, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 100KG per load - 4-jaw chuck - 1x automatic raw support Bedpfx Aoz Nia Uep Ieww - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older machine

Condition: like new (used), Year of construction: 2020, Welding positioner table for sale Bwedpfx Asz Rxz Rep Iow Sale only within EU member states! No private sales. MAE can be inspected upon request. All warranty rights are excluded. We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations.

Condition: good (used), functionality: fully functional, Year of construction: 2008, Used Trumpf LiftMaster Bjdpoza Uunjfx Ap Ieww Type 4020 Capacity 4000 x 2000 mm

Condition: ready for operation (used), Year of construction: 1992, Suction capacity: 1200 m³/h Maximum static pressure: 1350 Pa Electrical connection: 380 V, 0.75 kW Space requirement: 700 x 660 x 1030 mm Bodpfx Apsz Eq Tte Ioww Weight:

Condition: ready for operation (used), Year of construction: 1999, Suction capacity: 1000 m³/h Maximum static pressure: 2700 Pa Electrical connection: 400 V, 1.5 kW Space requirement: 855 x 655 x 1475 mm Bsdez Eq T Tspfx Ap Ieww Weight: 200 kg

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2334, arm reach: 3,000 mm, load capacity: 165 kg, empty load weight: 2,500 kg, control type: CNC control, number of axes: 6, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of axes: 6 Reach: 3,000 mm Load capacity: 165 kg MACHINE DETAILS Control system: CNC Dimensions & Weight Dimensions (L x W x H): 2,000 x 2,400 x 2,500 mm Unladen weight: 2,500 kg Bedpezzbbpefx Ap Ieww Transport packages: 2 EQUIPMENT CE marking

Condition: used, length 800 mm height 650 mm total power requirement 3,7 kW weight of the machine ca. 75 kg dimensions of the machine ca. 800 x 330 x 650 mm Technical Specifications Continuously adjustable range [A] 35â??270 Duty cycle (DC) at Imax. (10 min) [%] 30 (40) Welding current at 100% duty cycle [A] 160 Bodpfx Ajz Auivep Ijww Mains connection [V] 3/PE 400 Continuous power at 100% duty cycle [kVA] 5.5 Protection class IP 21 Included accessories: - Hose set - Pressure regulator - Ground cable - Basket coil adapter

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total height: 325 mm, total width: 185 mm, total length: 483 mm, overall weight: 16 kg, type of cooling: water, electrical fuse: 16 A, welding current at 100% duty cycle: 175 A, welding current (min.): 5 A, welding current (max.): 250 A, Equipment: documentation/manual, type plate available, Complete set: LORCH T 250 DC Basic Plus TIG welding machine with WUK 7 water cooling unit and accessories For sale is a professional industrial welding machine from the premium brand LORCH, model T 250 DC Basic Plus, combined with the innovative water cooling unit WUK 7. The system is designed as a mobile all-rounder as well as a fully-fledged workshop device and shines with state-of-the-art inverter technology. Manufacturer: LORCH (Made in Germany) Model: T250 DC Basic Plus incl. optional WUK 7 water cooling unit Condition: very good, fully functional Location: Graz _____ Scope of delivery (Full Set): • LORCH T 250 DC Basic Plus TIG inverter welding machine • LORCH WUK 7 water cooling unit (direct LorchNET connection) • TIG welding torch incl. 8-meter hose package • Ground cable • Maintenance unit for gas / pressure regulator _____ The new price was approximately €6,000 _____ Highlights: • Innovative single-cable solution: Thanks to the modern cooling unit connection, the entire system (inverter + water cooling) now only requires a single power cable. The power supply and intelligent, demand-based control of the WUK 7 are carried out directly via the rear of the welding power source. No cable clutter during assembly! • High-end inverter technology: Full 250 A welding power in a compact design. • FastPuls function (up to 2 kHz): Perfect for distortion-free welding of extremely thin sheets. • Robust mobility: Extremely lightweight base unit (only 16 kg), ideal for rough use in vehicle construction, metalworking, and tank and pipeline construction. _____ Technical data: • Power range: 5 – 250 A • Duty cycle (ED) at 40°C: 60% = 200 A / 100% = 175 A • Mains voltage: 400 V (mains fuse 16 A) Bwsdpfxeyxvwio Ap Isw • Cooling capacity (WUK 7): 0.53 kW • Weight: approx. 16 kg • Dimensions welding inverter Lorch T 250 DC: 483 x 185 x 325 mm (L x W x H) • Dimensions water cooling unit Lorch WUK 7: 547 x 212 x 265 mm (L x W x H) _____ The device is in a ready-to-use condition. Inspection and test run are possible by arrangement.

Condition: used, Year of construction: 2011, CNC gantry plasma cutting machine Manufacturer: Eckert Type: Jantar 2 Year of manufacture: 2011 CNC control Working area: 2 x 4 m 1 plasma torch with Kjellberg HiFocus 161i power source Automatic gas console Extraction table 31126ä Bedey Nqcbjpfx Ap Ijww

Condition: used, Year of construction: 2012, Plasma power source for plasma cutting system Manufacturer: Kjellberg Type: HiFocus 440i Year of manufacture: 2012 Automatic gas console Bedpfjz Ipnuex Ap Isww Includes cooling unit KWE360 Includes hose assembly with torch and cable 31126ä