Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 20001901, type of input current: three-phase, overall weight: 990 kg, input voltage: 400 V, total width: 1,780 mm, total length: 2,130 mm, total height: 3,070 mm, volume flow: 14,000 m³/h, filter area: 189 m², suction capacity: 14,000 m³/h, power: 15 kW (20.39 HP), input frequency: 50 Hz, input current: 26 A, intake vacuum (max.): 48 mbar, actuation type: electric, ESTA DUSTMAC F-189 industrial welding fume extraction/filtration unit for sale. Suitable for extracting and filtering welding fumes and dust from multiple extraction points, welding booths, or large capture hoods. Main technical specifications: - Manufacturer: ESTA - Model: DUSTMAC F-189 - Year: 2020 - Serial No.: 20001901 - Filter surface area: 189 m² - Number of filters: 9 pcs - Max. airflow rate: approx. 14,000 m³/h - Max. negative pressure: approx. 4,800 Pa - Main fan motor power: 15 kW - Voltage: 400 V / 50 Hz - Motor speed: 2945 rpm - Current: 25.9 / 15 A (according to the motor nameplate) - Approx. dimensions: 2,130 x 1,780 x 3,070 mm - Weight: 990 kg (according to the nameplate) The unit was reportedly used for approximately one year and then put into storage. Ibodpfx Akszuwqtjpjb Used equipment, sold as-is. Currently visible but not connected to power. Condition and completeness are shown in the photos. Location: Estonia. Loading: Forklift capability is available on-site. We can load the equipment onto the buyer’s truck. Transport: Transportation costs are the responsibility of the buyer.

Condition: like new (used), Year of construction: 2012, operating hours: 90 h, functionality: fully functional, type of input current: three-phase, total height: 1,100 mm, total width: 500 mm, total length: 1,200 mm, overall weight: 60 kg, Offer little used welding set Orbital welding of pipes on site (with or without oscillation, depending on pipe thickness) with assembly! Ibsdsv Di S Espfx Akpeb Pipe diameter from 25–115 mm Pipe thickness from 1–8 mm Inside includes a pipe cutter, welding arm, remote control, equipment with cooling system everything you see in the pictures. Length x width x height 1200 × 500 × 1100

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Medium-frequency spot welding machine – also suitable for welding aluminium. Rated power at 20% duty cycle: 180 kVA Max. welding power: 315 kVA Adjustable reach: 300 to 800 mm Arm spacing (min/max): 150–400 mm Electrode stroke: parallel stroke Electrode force adjustable up to 600 daN Weight: approx. 660 kg Welding control unit: Dalex L 4-6 Cooling water flow rate: 10 l/min Operating instructions and manual are available Ibedpfx Aozz Ripekpeb Working stroke triggered by pneumatic foot pedal Very good, well-maintained condition

Condition: used, Year of construction: 2025, functionality: fully functional, On behalf of our client, we are selling a laser welding machine from JASIC. Jasic handheld laser welding machine, 2000 watts, with wire feed Model LS-20000F Fully functional, demonstration model with invoice Location: 20537 Hamburg Ibodpozv Uvcsfx Akpsb

Condition: good (used), Year of construction: 2016, functionality: fully functional, working range: 6,000 mm, sheet thickness (max.): 30 mm, working width: 2,000 mm, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 150 mm, type of cooling: water, We are offering this well-maintained MicroStep MasterCut Compact 6001.20P plasma cutting machine, manufactured in 2016. Manufacturer: MicroStep Model: MasterCut Compact 6001.20P Working area: 6000x2000 mm Year of manufacture: 2016 Condition: good Plasma source: Kjelberg Hi Focus 161 neo Cutting range: sheet metal thickness 1-30 mm Ibsdpfx Aszt Imiekpjb The machine is in operation and can be inspected. The machine has been serviced annually by Microstep. Includes dust extraction system Donaltson Torit DCE. Machine available from September. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Brand: Grotius Control system: Linux CNC Working area: 3000 x 1500mm Length (mm): 4020mm Width (mm): 2330mm Height (mm): 1570mm Description: Includes Thermal Dynamics A40i plasma source & various wear parts. Ibedpszupvusfx Akpsb

Condition: ready for operation (used), Year of construction: 2016, MicroStep Master Cut Eco Plus CNC plasma cutting system with nesting software Year of manufacture: 2016 Power source: Kjellberg HiFocus 161i Ibedpezpf U Nsfx Akpob Provision for retrofitting an oxy-fuel torch including Kemper filter system Maximum working area: 3000x1500mm Machine location: Hall in Tirol Immediately available

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, laser type: fiber laser, laser source manufacturer: Raycus, laser power: 6,000 W, laser wavelength: 1,070 nm, working length: 1,500 mm, working width: 3,000 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.05 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, total length: 2,610 mm, total width: 5,125 mm, total height: 2,128 mm, Equipment: CE marking, The WatMachinery ZMB1530 6kW is a heavy-duty fiber laser cutting machine from the ZMB series, engineered for fast, precise, and reliable sheet metal processing. This model is fitted with a Raycus 6kW fiber laser source and offers a cutting area of 3000 x 1500 mm, making it an optimal solution for workshops and industrial production lines working with steel, stainless steel, aluminum, brass, and other metals. The machine is equipped with a Raytools BS06K auto-focus cutting head, Delta / INOVANCE servo drives, Taiwan-made rack transmission, HIWIN / DTX linear guideways, a French Motovario gearbox, and the Cypcut control system. Its robust construction includes a reinforced machine frame, enclosed safety cabin, automatic lubrication system, industrial control cabinet, integrated smoke extraction, and an industrial-grade PC. Each component has been selected to ensure high positioning accuracy, stable drive transmission, and reliable long-term operation. The ZMB1530 is designed for continuous industrial duty with a 24-hour operating mode, travel speed of 80 m/min on the X and Y axes, and a maximum acceleration of 0.8G. The control system supports multiple file formats, remote operation, and real-time alarms and safety interlocks. An industrial water cooling system guarantees stable performance of the laser source and protects the machine during extended production cycles. As indicated in the material and cutting charts in the product brochure, the machine efficiently processes carbon steel, stainless steel, aluminum, and brass. The ZMB series is ideally suited for industries such as sheet metal fabrication, electrical cabinet manufacturing, automotive component production, general machinery, signage, metal product manufacturing, tooling, and many more sectors. Key Advantages: - 3000 x 1500 mm working area - Raycus 6kW fiber laser source - Raytools BS06K auto-focus cutting head - Cypcut control system - Delta / INOVANCE servo motors and drives - HIWIN / DTX linear guideways - Taiwan YYC rack transmission - French Motovario gearbox - Industrial water chiller - Fully enclosed protective cabin - Automatic lubrication system - Industrial PC with integrated vision system - Designed for 24/7 industrial operation Technical Specifications: Model: ZMB1530 / ZM-Series Laser Source: Raycus Fiber Laser Laser Power: 6 kW Working Area: 3000 x 1500 mm Wavelength: 1070–1080 nm Interfaces: USB, RJ45 X-Axis Travel: 3000 mm Y-Axis Travel: 1500 mm Z-Axis Travel: 100 mm Traverse Speed (X/Y): 80 m/min Ibodeyr D Nxspfx Akpob Positioning Accuracy: ±0.05 mm/m Repeatability: 0.05 mm Maximum Acceleration: 0.8G Power Supply: 380V / 50Hz Operating Mode: 24/7 Machine Weight: 3150 kg Machine Dimensions: 5125 x 2610 x 2128 mm Main Components: * Raycus laser source * Raytools cutting head * WatMachinery machine bed and gantry * Taiwan YYC rack * France Motovario gearbox * Delta / INOVANCE servo drives (X, Y, Z axes) * HIWIN / DTX linear guideways * Cypcut control system * HanLi industrial water chiller * CHNT / Schneider electrical components * CKD / SMC pneumatic components * Integrated smoke extraction system * Automatic lubrication system * HP industrial PC * Enclosed safety cabin Application Areas Suitable for: * Sheet metal fabrication * Electrical cabinet production * Advertising and signage * Mechanical parts manufacturing * Kitchen equipment production * Automotive industry * General machinery industry * Metal product manufacturing * Tooling and measurement component production Pro

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 26,787 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: FANUC, laser type: CO₂ laser, laser source manufacturer: FANUC, laser power: 4,000 W, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, type of cooling: water, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, fume extraction, safety light barrier, Amada Alpha LC2415NT 4 kW laser cutting system with loading and unloading unit, as well as storage tower with 7 storage positions (LKI). Suitable for both single-part and high-volume production. Regularly serviced by technicians; condition according to operating hours is very good. The chiller unit is equipped with a connection for heat recovery. The system has been dismantled, stored in an external warehouse, and can be inspected at any time. Maximum sheet size: 3000x1500mm. Isdoyfl U Nspfx Akpebb

Condition: used, Year of construction: 1996, machine/vehicle number: 354-0, Offer 26036 Approximate technical data: - Load capacity approx. 3000 kg - Platen diameter 1520 mm - Platen can be tilted by motor - Rotational movement can be continuously adjusted electrically - Welding current transmission 650 A Ibjdpfxsz Df Hfs Akpeb - Power supply 400 V - Table height in horizontal position approx. 1450 mm - Right and left rotation - Hand-held remote control - Foot switch - Space requirement approx. W 1700 x H 1500 x D 2300 mm - Weight approx. 2800 kg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, input voltage: 400 V, open-circuit voltage: 87 V, welding current at 60% duty cycle: 270 A, welding current at 100% duty cycle: 220 A, input current: 25 A, protection type (IP code): IP23, welding current (min.): 3 A, welding current (max.): 300 A, input frequency: 60 Hz, We are offering this as-new EWM Tetrix XQ 300 puls AC/DC Expert 3.0 5POL welding machine, year of manufacture 2023. Ijdpfjy Sxkfex Akpebb Including Cool XQ 41-1 cooling module Mains voltage: 380–400 V Mains frequency: 50/60 Hz Rated current I1,max: 24.9 A Rated current I1,eff: 15.5 A Open-circuit voltage (U0): 87 V MIG/MAG welding current range: 3–300 A MIG/MAG welding voltage: 10.1–22.0 V MIG/MAG duty cycle 40%: 300 A MIG/MAG voltage at 40% duty cycle: 22.0 V MIG/MAG duty cycle 60%: 270 A MIG/MAG voltage at 60% duty cycle: 20.8 V MIG/MAG duty cycle 100%: 220 A MIG/MAG voltage at 100% duty cycle: 18.8 V Manual arc welding current range: 5–300 A Manual arc welding voltage: 20.2–32.0 V Manual arc welding duty cycle 30%: 300 A Manual arc welding voltage at 30% duty cycle: 32.0 V Manual arc welding duty cycle 60%: 260 A Manual arc welding voltage at 60% duty cycle: 30.4 V Manual arc welding duty cycle 100%: 210 A Manual arc welding voltage at 100% duty cycle: 28.4 V Protection class: IP23 Year of manufacture: 2023 If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 80 mm, sheet thickness aluminum (max.): 50 mm, input voltage: 400 V, total length: 13,000 mm, cutting current: 300 A, travel distance X-axis: 2,500 mm, travel distance Y-axis: 12,000 mm, type of cooling: water, Here is the sales listing translated into professional English: For Sale: Teknohaus Thermcut 4500 P Gantry Cutting Machine (Bevel Plasma & Oxy-Fuel) For sale: A modern, industrial-grade Teknohaus Thermcut 4500 P gantry cutting machine, manufactured in 2021. This system combines high-precision Hypertherm XPR300 bevel plasma technology with IHT Automation oxy-fuel cutting, offering a versatile range of cutting capabilities from thin sheet metal to heavy plate cutting and beveling. Key Specifications Manufacturer: Suomen Teknohaus Oy Model: Thermcut 4500 P Year of Manufacture: 2021 Supply Voltage: 3 x 400 V Dimensions & Capability Cutting Area / Table Size: 2,500 mm x 1,200 mm Bevel Plasma Capability: Enables direct cutting of weld preparation bevels (e.g., V, X, Y, and K bevels) directly from the plate. Equipment & Features Plasma Power Source: Hypertherm XPR300 (X-Definition technology, 300 A) Oxy-Fuel Cutting: IHT Automation / GCE FIT+ torches with dedicated gas control panel (Preheat / Propane / Cutting / O₂) Ijdjzy I S Eepfx Akpjbb Control System: Modern CNC control unit with touchscreen and physical controls Safety Features: Emergency pull-wire safety system along the table sides and comprehensive safety labeling Cutting Capacity (Hypertherm XPR300) Mild Steel: Piercing up to 50 mm (Argon-Assist), Severance up to 80 mm Stainless Steel & Aluminum: Piercing up to 38 mm / Severance 50–75 mm The machine is in excellent working condition and has been well-maintained in an industrial production environment.

Condition: used, Year of construction: 2008, throat depth: 680 mm, nominal power at 50% duty cycle: 45 kVA, input voltage: 400 V, Combined roll seam and spot welding machine, type UN63 - Roll seam welding - Rated voltage 400V/50Hz - Rated power 45kVA - Welding current 15kA - Fuse rating 125A - Overhang 670mm - Upper roller diameter 175mm - Lower roller diameter 120mm - Arm distance 350mm - Electrode force 500daN - Stroke approx. 30mm - TE500 control unit with 99 welding programs, parameters for each program, digital current display after each weld, current monitoring, stepper function, Language selection: German, English, Italian, French, etc., with operating manual - 2-stage foot switch according to UVV standards - Machine main switch Ibjdpjzh Izcefx Akpeb - Pneumatic maintenance unit - Weight approx. 680kg - Documentation with circuit diagram, compressed air diagram, and cooling water circuit - VAT can be shown separately - Spot welding fixture / electrode holder and lower arm available at an extra cost. The machine is located in Dresden, near the A17 highway, and can be inspected and demonstrated by appointment. On-site commissioning is subject to a fee, billed according to actual effort.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 82397, type of input current: three-phase, welding current (max.): 420 A, Equipment: type plate available, MERKLE Insquare W 421 AC/DC water-cooled TIG welding system Manufacturer: MERKLE Model: Insquare W 421 AC/DC Year of manufacture: 2012 Serial number: 82397 Description For sale is a powerful AC/DC TIG welding system from MERKLE with water cooling. This system is suitable for professional welding applications on steel, stainless steel, aluminum, and other non-ferrous metals. The AC/DC technology allows for both DC and AC welding, covering a wide range of applications. With a welding current of up to 420 A, the system is ideal for industrial use in metal, tank, plant, and pipeline construction. The water cooling ensures continuous and reliable operation, even at high welding currents. Technical data Manufacturer: MERKLE Type: Insquare W 421 AC/DC Year of manufacture: 2012 Welding current range: 5 – 420 A AC frequency: 50 – 200 Hz Open-circuit voltage: 80 V Mains connection: 400 / 415 V, 50 / 60 Hz, 3~ Duty cycle at 40 °C: 420 A at 40 % 360 A at 60 % 310 A at 100 % Protection class: IP23 Water cooling Iedpfxszamffe Akpjbb Standard: EN 60974-1 Scope of delivery MERKLE Insquare W 421 AC/DC Water cooling TIG torch Ground cable Foot pedal All information is subject to change without notice.

Condition: good (used), Year of construction: 2017, functionality: fully functional, • Baykal BPL-H 4012 • Supplied new in 2017 • Hypertherm XPR300 AutoGas • EDGE Connect CNC • Twin plasma heads • Arc hours: 2,016 and 3,120 • 4 m x 12 m bed Ibedpfxjzp D S To Akpeb

Condition: used, Year of construction: 2001, functionality: fully functional, Straight Down Punching Machine, EME brand, 60 KVA, 380V, Single-phase, Used. Ibjdpszhuctefx Akpeb

Condition: used, Year of construction: 1999, - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: R99X75197 - Number of axes [pcs]: 6 - Reach [mm]: 1368 - Load capacity [kg]: 6 - Control type: Fanuc Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Ibsdswh Spyjpfx Akpob Lukas van Rossum

Condition: used, MIG/MAG pulsed gas shielded welding machine, EWM, type Phoenix 301 Progress Puls Force Arc Serial No. Art. No.: Year of manufacture: 2007 Power: 300 amps = 60% duty cycle 250 amps = 100% duty cycle Adjustment range: stepless Open-circuit voltage: approx. 29 volts Mains connection: 400 volts, 50 Hz, 16 amps plug - Digital display for voltage and current - Pulse function - Various welding programs selectable Ibsdpfoz Afhiex Akpsb - 2-cycle, 4-cycle and spot welding - Water-cooled - 4-meter hose package, NEW, with central connection - Welding gas pressure regulator, NEW - Welding machine equipped with 1.2 mm welding wire Space requirement L x W x H: 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition - fully functional - ready for demonstration

Condition: good (used), Year of construction: 2017, operating hours: 12,900 h, functionality: fully functional, machine/vehicle number: 20170777, repeat accuracy: 0.03 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.06 mm, type of input current: three-phase, input voltage: 400 V, operating pressure: 4,000 bar, power of the servo motor: 37,000 W, feed length X-axis: 4,000 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 200 mm, total height: 3,500 mm, total length: 6,200 mm, total width: 3,200 mm, water pressure: 4,000 bar, control cabinet height: 1,950 mm, compressed air connection: 7 bar, pump pressure: 4,000 bar, control cabinet width: 800 mm, overall weight: 7,500 kg, product height (max.): 200 mm, input frequency: 50 Hz, power: 37 kW (50.31 HP), Equipment: safety light barrier, Waterjet cutting system Perndorfer type WSS4020, table size 4000/2000 mm, high-pressure pump BFT Ecotron with 37 kW and 4000 bar cutting pressure, 3D cutting head for contour cutting. The machine is used and in good condition, and has recently undergone an overhaul by the manufacturer. The machine can be inspected and tested at any time. Iedpox H Ny Tjfx Akpebb

Condition: excellent (used), Trumpf Ibodpez Azwgofx Akpsb TruMark 3000 Industrial laser Laser marking system 2 units in stock.

Condition: as good as new (ex-display), Year of construction: 2020, Here we offer you a resistance welding system. The system is designed for the automated resistance welding of the following joints: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any use of the system other than that described above is not intended and therefore not permitted! System layout: Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (lxb) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator: 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components: - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 Iodpfxjzd Rmge Akpobb p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Control: ST-T13V2.0 Power unit: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Type: BDE11154003 Condition: unused, machine has never been used in production Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2026, total height: 800 mm, total length: 3,000 mm, total width: 1,500 mm, Colour: Grey Empty weight: 1.550 kg The price does not include accessories. - Year: 2026 - Documentation available: No - CE certificate present: No - Table length [mm]: 3000 - Table width [mm]: 1500 - Table top thickness [mm]: 15 - Transport dimensions: 3000mm x 1500mm x 800mm (l x w x h) - Transport weight [kg]: 1550kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Ibjdjzry Rdspfx Akpjb

Condition: good (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2020130, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cypcut, laser type: fiber laser, laser source manufacturer: IPG, laser power: 2,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,050 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 150 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, cutting speed: 13,000 mm/min, positioning speed: 80 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, power: 26.5 kW (36.03 HP), input voltage: 400 V, input frequency: 50 Hz, overall weight: 5,000 kg, Equipment: documentation/manual, dust extraction, fume extraction, CYPCUT - CYPTUBE, auto-center positioning, pneumatic clamping, automatic alignment device, automatic clamping device, cutting head incl. protective glass, Raytool / SWISS, laser source - IPG / Germany, software for 3D tube and profile cutting, automatic loading system for tubes and profiles, extraction unit Filtercube 2H, 4 kW, 50 m² Iodpfx Akey Efbkopobb

Condition: used, Year of construction: 2012, operating hours: 2,795 h, functionality: fully functional, machine/vehicle number: 21214714, type of input current: three-phase, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 150 mm, sheet thickness aluminum (max.): 40 mm, input voltage: 230 V, cutting speed: 2,000 mm/min, table height: 700 mm, workpiece weight (max.): 30,000 kg, table length: 12,950 mm, table width: 2,700 mm, input frequency: 50 Hz, Equipment: documentation/manual, We offer this used ESAB COMBIREX DX 3500 gas and plasma cutting machine, manufactured in 2012. Type: COMBIREX DX 3500 Machine No.: 21214714 Ibodpfx Akjzc Hn Eepob Year of Manufacture: 2012 If you have any questions or require further information, please contact us by email or phone.

Condition: used, Year of construction: 2018, functionality: fully functional, type of input current: three-phase, overall weight: 95 kg, input voltage: 400 V, volume flow: 1,100 m³/h, pressing: 2,250 Pa, power: 1.1 kW (1.50 HP), input frequency: 50 Hz, Equipment: type plate available, KEMPER ProfiMaster IFA welding fume extraction system – year of manufacture 2018 – 400 V Currently, 2 units are in stock! 1x 3m arm + 1x 4m arm Manufacturer: KEMPER Model: ProfiMaster IFA Year of manufacture: 2018 For sale is a used, fully functional KEMPER ProfiMaster IFA welding fume extraction system. This unit is ideally suited for extracting welding fumes and grinding dust directly at the source and is designed for professional use in workshops and metalworking. The system is in good condition. The filter was replaced on October 6, 2025, making the unit immediately ready for use. Technical data: Airflow: 1,100 m³/h Power supply: 400 V / 50 Hz Motor power: 1.1 kW Rated current: 2.3 A Max. negative pressure: 2,250 Pa Protection class: IP42 Control: 24 V Weight: 95 kg Continuous operation: 100% duty cycle IFA-tested version Equipment: 3m arm length Mobile version Filter monitoring Easy filter replacement via maintenance flap Robust industrial design Ideal for welding workstations Condition: Isdpfx Akozg T A Ajpsbb Used Technically flawless Filter insert new as of October 6, 2025 Safety inspection valid until 2026, according to the inspection sticker All information is subject to change without notice.