Condition: ready for operation (used), Year of construction: 2019, This CLOOS QIROX QRC 350-E was manufactured in 2019. It features a maximum payload of 15 kg and a working range up to 4500 mm. Equipped with a QC 2 Master control system, it includes a handheld programming device with an 8.4" touchscreen. The robot supports expansion up to 12 axes and comes with integrated welding software and a digital interface. Consider the opportunity to buy this CLOOS QIROX QRC 350-E welding robot. Contact us for more information about this machine. Extra Information Robotics and Control Unit Max. payload: 15 kg Working range: 0–4500 mm Digital inputs/outputs: 16 Serial interface: Yes CAN bus: Yes USB interfaces: 2 Flash memory: 8 GB Buffer module: 24 V Expandable to up to 12 axes Hsdpfjx D Hdhox Aaljfd Welding Technology Power source: Included Welding interface: Integrated Welding and function test: Included Torch cleaning: CMR-8-C torch cleaning device, upright Robotic welding torch: Included Sensors Tactile sensor: Yes Arc sensor: Included Technical Data of Workpiece Positioner Load capacity: 10 kN Nominal torque: max. 1600 Nm Tilting moment: max. 8800 Nm Mass moment of inertia: 900 kgm² Rotation range: +,- 360° Swivel range: 370° Welding Fume Extraction Extraction capacity: 3000 - 4320 m³/h Motor power: 5.5 kW Connection voltage: 3 x 400V/50 Hz Noise level: 65 dB(A) Weight: 640 kg Dimensions (W x D x H): 1413 x 1413 x 2110 mm

Condition: ready for operation (used), Year of construction: 2017, controller manufacturer: MicroStep, This MicroStep Fiber MSF 3001.15L was manufactured in 2017. It features a 3m x 1.5m cutting table, 4kW IPG YLS laser source, and a HighYag cutting head for perpendicular cuts only. It includes Donaldson extraction and filtration equipment and automatic layout planning software for flat sheets. Consider the opportunity to buy this MicroStep Fiber MSF 3001.15L fiber laser cutting machine. Contact us for more information. Additional equipment • 4kW IPG YLS laser source Hsdpeyaiy Sjfx Aalefd • Donaldson extraction and filtration equipment • Automatic layout planning software for flat sheets Machine Benefits Technical Machine Benefits • 3m x 1. 5m cutting table with hydraulic pallet changer • Highyag cutting head for perpendicular cutting only Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2021, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, controller manufacturer: MicroStep, controller model: iMSNC, number of axes: 3, This 3-axis MicroStep 3001.15P/ME plasma cutting machine was manufactured in 2021. It features a working area of 1500x3000mm, ideal for precise and large-scale cutting tasks. If you are looking to get high-quality cutting capabilities, consider the MicroStep 3001.15P/ME machine we have for sale. Contact us for more information. • Working dimensions: 1500 x 3000 mm Hfjdpjycvq Aefx Aaljd • Permissible plate thickness: stable construction up to 100 mm material thickness • Guides/Drives: high-quality linear guides and double-sided clearance-free drive • Axis control: digital, maintenance-free AC servos with IRC • Positioning speed: up to 40,000 mm/min • Measuring system: IRC 2500 (incremental encoder) • CNC control: MicroStep iMSNC with integrated network card • Plasma power source: Hypertherm XPR170 • Gas console: automatic Core gas console • Table surface: grid cover in the cutting table • Height control: "THC" module for automatic height regulation via arc voltage • Marking unit: "MicroPunch" needle marking unit • Safety features: double-sided rope safety system (collision protection) for the gantry via Emergency Stop • Visual signaling: 2-color LED signal tower on the gantry bridge • Operation interface: externally standing MMI console • Connectivity: USB 3.0 port for storage media • Software: AsperWin Basic (2D programming) and AsperWin Nesting (automatic nesting)

Condition: ready for operation (used), Year of construction: 2021, operating hours: 900 h, number of axes: 3, This 3-axis Flow MACH 100-4020 was manufactured in 2021, featuring a cutting area of 4020 × 2020 mm and a cantilever structure. It includes a FlowMaster® license, Flow PASER® 4 cutting head, and a Hyplex Prime 30 pump with a maximum pressure of 4,150 bar. Ideal for abrasive waterjet cutting with less than 800 operating hours. If you are looking to get high-quality cutting capabilities, consider the Flow MACH 100-4020 machine we have for sale. Contact us for more information. • Operating hours: less than 800 hours • First commissioning: September 2021 • Working area: 4020 × 2020 mm (4 m × 2 m) • Design: Cantilever (gooseneck-type) structure • Axes: 3 axes (X, Y, Z) driven by ball screws • Software & control: FlowMaster license included; FlowMaster programming/control installed on the machine control station and an additional customer PC • Abrasive waterjet cutting system: • Cutting head: Flow PASER 4 with high-pressure ON/OFF valve • High-pressure generation: • Pump: Flow Hyplex Prime 30 ultra-high-pressure pump • Maximum pressure: 4,150 bar • Features: High efficiency with integrated autonomous cooling • Workpiece support tank: Heavy-duty painted steel tank, independent from the machine axes Additional equipment • High-pressure piping kit (from pump to cutting head) • Laser pointer for positioning (red dot for program alignment) • UltraPierce system (abrasive suction/Venturi) for chip-free piercing of sensitive materials (glass, stone, composites, plexiglass) • EcoFlow cutting sludge extraction system with pneumatic diaphragm pumps and hopper for abrasive recovery into a big bag Hsdpsx Sz A Rofx Aalofd • Flow abrasive feeding system

Condition: ready for operation (used), Year of construction: 2016, laser power: 6,000 W, overall weight: 15,500 kg, number of axes: 3, This 3-axis Mazak OPT IPLEX 3015 Fiber II was manufactured in 2016. It features a 6 kW fiber laser, Mazatrol Preview 3 control, and a machining size of 3050 × 1525 mm. Equipped with advanced features like auto nozzle changing, auto focus positioning, and intelligent monitoring functions, it ensures precise and efficient operations. Consider the opportunity to buy this Mazak OPT IPLEX 3015 Fiber II fiber laser cutting machine. Contact us for more information. • Working hours: 53,000 h • Control/Controller: MAZATROL Preview 3 Hfodex I Sm Eepfx Aalod • Mazak Control Box: Included • Machining size: 3050 × 1525 mm • Resonator: IPG • Torch: Multi-Control Torch 2.0 (upgraded) • Intelligent Setup Function (ISF) • Auto nozzle changing (8 holders) • Auto nozzle cleaning • Auto focus positioning • Beam diameter change function • Intelligent Monitoring Function (IMF) • Pierce detection • Burn detection • Plasma detection • Protective window sensor • Condensing lens sensor • Elementary diagram: DD628101002 • Rated capacity: 57 kVA • Power supply: 3AC 380 V, 50/60 Hz • Auxiliary voltages: AC 100 V / DC 24 V Additional equipment • Chip conveyor: Yes • Dust collector: Donaldson • Chiller: IPG • Workpiece lifter: Yes

Condition: ready for operation (used), Year of construction: 2022, This 6-axis FRONIUS UR10 Roboter e-Series was manufactured in 2022. It features a 6-axis robot with a control panel, a maximum payload of 12.5 kg, and a reach of 1300 mm. Additional specs include a 4000mm linear axis, a rotating/tilting axis with a 250kg capacity, and a torch holder. Ideal for advanced welding applications. Contact us for more information about this machine. Additional equipment • operateONE: Quick start buttons (Start / Stop / Reset / Emergency stop, Speed potentiometer, Selector switch for 2 stations operation) • slideONE: 4000 mm linear axis for Universal Robot with an effective stroke of the robot at 1600 mm • RotateTWO 250: External rotating/tilting axis for the robot with a 250 kg load capacity, including standard product with octagonal plate (16 mm perforation) and SW 600x50 table • Safety technology: 1 set of laser light barriers with steel column and 1000 mm light barriers Machine Benefits Technical Machine Benefits • Max reach: 1300 mm • Welding technology: torch holder incl. Integrated freedrivetaster, fronis cmt torch • Ergonomic holder for ur teach panel • Supports all welding positions and ensures accessibility • Floor stand for free-standing axis on two columns including leveling plates for installation Hfodpox D E Hujfx Aaled • The tools shown in the pictures and the 3 cabinets are included. Extra Information Machine still under power

Condition: like new (used), Year of construction: 2021, – Year of manufacture 2021 (the machine has never been used) – Capacity 20 kVA Hjdpfx Aeytr N Nealofd – Pneumatic – Control TE101 – Cooling – Documentation – 400V

Condition: used, Year of construction: 2024, CNC plasma cutting machine Manufacturer: Microstep Model: MasterCut Compact 3001.15P Year of manufacture: 2024 Working area: 1,500 x 3,000 mm 1 x plasma torch with Kjellberg Q1500 plasma source with automatic O² gas console (O², N²) 1 x TEKA filtration unit for outdoor installation 1 x nesting software in the machine controller Hedpfsytqmmex Aalefd Availability: immediately

Condition: new, Year of construction: 2026, laser power: 3,000 W, laser wavelength: 1,064 nm, working length: 3,050 mm, working width: 1,530 mm, Model: IMPACT Laser OP-3015H Cutting Size: 3050*1530mm Laser Power: 3000W or 6000W Laser Generator: MAX Laser Wave Length: 1064nm Position Accuracy: 0.02 mm/m Repeatability Accuracy: 0.01 mm Max Acceleration:1G Cutting Speed: 0-140 m/min Interface: USB,RJ45 Working Voltage: 1000-2000W:220v, 2phase, 50hz 3000W:380v, 3phase, 50hz Working life of fiber module: More than 100000 hours Work Environment: 0-45°C, Moisture 45-85% Machine structure: Big thickness stable & strong square tube welded steel bed Beam: Aviation grade tensile aluminum beam Brand of Motor and Drivers: China Innovance Servo motor and drivers (1800W*2+850W+400W) Transmit System: Dual Rack & Pinion type Control System: FUSCUT 4000E Controller Cutting Head: BLT421 automatic focus cutting head Hjdpfx Aeytd Scealefd Reducer: Italian Motovario reducer Liner Guider System: Taiwan Hiwin (X 25mm, Y 30mm, Z 20mm) Water Chiller: S&A Computer: Industry computer Automatic lubrication system: Yes Pneumatic proportional valve: Japan SMC Prices: 3kW: 39.500€ 6kW: 44.500€

Condition: used, Year of construction: 2009, Technical details: Beam Hour: unbekannt / unknown h Hfjdpeyuvciofx Aalod laser capacity: 4000 W The TLF4000 resonator was installed in a Trumpf True Laser 2525: Laser power: 4,000 W (4 kW) Wavelength: 10.6 µm Beam mode: TEM01* Pulse frequency (gating): 100 Hz – 10 kHz Gas consumption (laser): CO2: approx. 1 l/h N2: approx. 6 l/h He: approx. 13 l/h Cutting gas O2: approx. 500 – 2,000 l/h Electrical power consumption: approx. 33 – 67 kW Adjustable laser power: programmable in 1% increments Laser type: CO2 laser with closed gas circuit Translated with (free version) *

Condition: like new (used), Year of construction: 2023, functionality: fully functional, EWM Phoenix 452 Puls Multimatrix Mig Mag welding machine Year of manufacture: 2023. unused still in original packaging. Hodpfx Aaotkuvxoljfd

Condition: excellent (used), Year of construction: 2004, Carl Cloos GLC 503 Quinto SD welding machine. A total of 4 units available. Year of manufacture: 2004-2004-1999. Price refers to 1 unit. Hedpfx Aaetkuk Rolsfd

Condition: excellent (used), Year of construction: 2012, CLOOS GLC 403 Quinto welding machine. A total of nine Cloos 403 machines are available. Year of manufacture: from 2005 to 2012. Other models of the Cloos 503 welding machines are in stock Hodpfjtkunuox Aalofd

Condition: excellent (used), Year of construction: 2003, Cloos GLC 451 C welding machine. Year of construction: 2003 With welding package Hedpfxstkurij Aaljfd

Condition: excellent (used), 1 x TransPuls Synergic 5000R and 2 x TransPuls Synergic 4000R welding machines. Hfjdpfjtkuyisx Aalod Attention: the price is only for one welding machine

Condition: new, Year of construction: 2025, IMPACT 4in1 from stock Europe the IMPACT FL 1500 is the most modern Laser - Welding - Cleaning and Cutting machine in one. Special software and parameter setting in this laser machine make it posible that you can use it for Cleaning , cutting and welding. Most customers use a welding machine in max 20% of the time, the same is for Cleaning and fine cutting. A weldong machine with extra functions as cleaning and cutting from 1,5 Kw together cust atlast 25 till 30.000 euro. so we bring for 50% of the investment cost the same solution and also with the function cutting and cleaning steel and other materials. when you are interested we can send you a complete offer. we deliver 3 in 1 machine from 1,5 - 2 and 3 Kw include wire feeder include in the price the 3 kw have 2 wire feeders sothat welder can shift quickly. 1,5 and 2 Kw need 1 phase 220 volt. 3 Kw is on 3 X 380 volt. Hsdpfxeu Nf Nzs Aalsfd we deliver in complete Europe, we have in Europe in 3 locations a sales and service organisation.

Condition: used, functionality: fully functional, Year of construction: 2016, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Mazak, laser type: fiber laser, laser source manufacturer: IPG, sheet thickness (max.): 20 mm, power: 4 kW (5.44 HP), total length: 4,000 mm, total width: 2,000 mm, year of last overhaul: 2023, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Well-maintained Mazak Optiplex II Laser Cutting Machine Sheet capacity: 4x2 meters 4 kW – Mostly used for cutting steel and stainless steel up to 8 mm, occasionally 12-15 mm. Hfsdpfx Aaeyrybqjljd Machine has been used for in-house production. Received 1 to 2 maintenance services per year, always properly carried out. After relocation, the machine became redundant and is currently unused due to the purchase of a second machine. Immediately available. Installation services can be provided if required.

Condition: new, Welding electrodes 68 HH UTP, 4 mm diameter, 365 mm long Hfsdpfx Aajyml Ufoled

Condition: excellent (used), Year of construction: 2019, The system consists of two identical laser welding units. The system was previously used to manufacture Li-ion batteries (E-Smart). In this process, cell connectors for series connection in battery modules were welded. The cycle time for battery modules in this production was 3-4 minutes. Hfjdpfx Asv Iq Tljalod Basic data: Year of manufacture: 2019 Weight: 6021 kg Nominal current: 20 A Connected load: 12 kVA Disc laser: Trumpf 12-12-30-A32/11 with focusing optics (PFO) Laser measurement and calibration: PRIMES FocusParameterMonitor (FPM) Control cabinet cooling: RITTAL SK 3185830 1x laser source supplying both systems: Trumpf TruDisk 5001, Laser power: 5 kW Wavelength: 1030 nm Beam quality: < 100 µm

Condition: as good as new (ex-display), Hardfacing electrode Make Duramit W4 material 1.2567 diameter 5 mm Hedpfx Aohhyiloaljfd length 450 mm 55 pieces in package 2 packages available 95 Euro per package

Condition: new, High temperature resistant corrosion protection and temperature resistant special electrode Make Capilla Type 521 E HL diameter 2,5 mm length 350 mm Weight 5kg Hfedpfx Ajhhykisaljd

Condition: like new (used), Hardfacing electrode Make Duramit W4 material 1.2567 diameter 2,5 mm length 300 mm 175 pieces in package Hodehhyhyjpfx Aaljfd 3 packages available 95 Euro per package

Condition: new, Hardfacing electrode Make Duramit W4 material 1.2567 diameter 6 mm Hfjdjhhyitspfx Aaljd length 450 mm 40 pieces in a package 6 packages available 95 Euro per package

Condition: new, Hardfacing electrode Make Duramit W4 material 1.2567 diameter 3,25 mm length 350 mm 120 pieces in package Hjdpohhyizefx Aalefd 2 packages available 95 Euro per package

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm material thickness 25 mm weight 920 kg Manufacturer: GERD WOLFF Technical Details: • Length 2400 mm • Width 1200 mm • Height 200 mm • Weight 920 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 6 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. Hsdpfx Asynbmmsaljfd To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table