Used vessel turning units for sale (74)

Condition: good (used), Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system, shaft straightening system Giedpfsctmvzjx Ai Neu -Pipe straightening system for: steel pipes or shafts, flame straightening with water cooling -Drainage channel and water pump -2x: Counter-holder prism -Counter bearing: adjustable -Dimensions: 4000/870/H810 mm -Empty weight: 500 kg

Condition: good (used), Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system -Pipe straightening system for: steel pipes, with flame and water cooling Flame straightening -Drainage channel and water pump -Roller diameter: Ø 180 mm -Drive: PIV gearbox -electrically adjustable -Load capacity: 1 ton -Speed: min. 50 mm/min -Speed: max. 150 mm/min -Manual switch Gisdpfxscp Nvys Ai Nou -Counter bearing: laterally adjustable -Drive dimensions: 3600/820/H850 mm -Dimensions of counter bearing: 2950/820/H850 mm -Empty weight: 1300 kg

Condition: good (used), Year of construction: 2021, Offer 23053 Technical data: - Load capacity per castor support 2000 kg - Roller dimensions Ø 60 x 100 mm - 8 support rollers - Hydraulic lifting device 50 mm - Lifting device must be operated by separate hydraulic unit Hydraulic unit + connecting hoses are not available - Space requirement approx. W 800 x H 350 x D 600 mm Gijdpfx Aijrl Iynj Nsu - Weight approx. 180 kg each

Year of construction: 2009, condition: good (used), machine/vehicle number: 120P1109, OFFER 21407 Mot. tank-boiler turning device with rail trolley Giedpfx Ashcnhmsi Nou Technical data: - Total payload driven + travelling unit 40000 kg. - payload per vessel device 20000 kg - workpiece diameter approx. 500 - 3500 mm - Centre distance of the support rollers adjustable via trapezoidal thread spindle - roller diameter 500 mm - roller width 150 mm - driven unit with drive on both sides - infinitely variable rotational speed - manual remote control for Re- and Li.-run - drive 400 V - Both units are mounted on rail trolleys - space requirement with running unit approx. W 3800 x H 1150 x D 1350 mm - Space requirement with running unit approx. W 3600 x H 1150 x D 1350 mm - Weight attached unit approx. 2500 kg - Weight with running unit approx. 1800 kg

Year of construction: 1985, condition: good (used), machine/vehicle number: XXXX, Lg.No. 21392 Technical data approx: - Total payload driven + travelling unit 25000 kg Giedpjk Eatdjfx Ai Nsu - payload per container device 12500 kg - workpiece diameter approx. 500 - 4000 mm - center distance of the support rollers adjustable - roller diameter 400 mm - roller width 120 mm - infinitely variable rotation speed - manual remote control for Re- and Li.-run - drive 400 V - space requirement attached unit approx. W 3500 x H 850 x D 1000 mm - space requirement with running unit approx. W 2700 x H 850 x D 800 mm - Weight of driven unit approx. 1300 kg - Weight with running unit approx. 900 kg

Year of construction: 1998, condition: good (used), Offer 23126 Technical data: - Total payload driven + travelling unit 20000 kg. Gijdpfxsnwmt Ie Ai Nsu - payload per container device 10000 kg - workpiece diameter approx. 500 - 3500 mm - center distance of the articulated support arms man. adjustable - Roll diameter 4 x per support arm 250 mm each - roller width 4 x each support arm 80 mm - infinitely variable turning speed approx. 100 - 1500 mm/min - manual remote control for Re- and Li.-run - drive 400 V - space requirement with running unit approx. W 1700 x H 1100 x D 1000 mm - space requirement with running unit approx. W 1700 x H 1100 x D 700 mm - Weight attached unit approx. 1400 kg - Weight with running unit approx. 1000 kg

Condition: new, workpiece weight (max.): 10,000 kg, – Capacity 10 tons Gisdpov Dbz Ejfx Ai Neu – Minimum workpiece diameter 600 mm – Maximum workpiece diameter 3700 mm – Roller diameter 250 mm – Wireless remote control – Digital speed display – Emergency stop – Documentation – 400V

Condition: new, workpiece weight (max.): 1,000 kg, – Capacity 1000 kg – Workpiece minimum Ø 50 mm – Workpiece maximum Ø 800 mm – Roller diameter 250 mm – Continuously adjustable speed Giodpev A Rrksfx Ai Nju – Foot pedal – Emergency stop – Documentation – 230V

Condition: new, - Load capacity 5000 kg Gedpfeqy Nr Hox Ai Noiu - Workpiece minimum Ø 250 mm - Workpiece maximum Ø 2300 mm - Roller diameter 250 mm - Wireless remote control - Digital speed display - Emergency stop - Documentation - 400V

Condition: new, weight max. 1000 Kg workpiece diameter 20 - 800 mm drum diameter 200 x 50 mm feed 80 - 1600 mm/min total power requirement 0,23 kW Giodpfx Aijupxkkj Nou dimensions of the machine ca. 2 Stk. 0,45x,039x0,33 m

Condition: new, weight max. 1000 Kg workpiece diameter 20 - 800 mm drum diameter 200 x 50 mm feed 50 - 2000 mm/min weight 65 kg total power requirement 0,6 kW dimensions of the machine ca. 0,8 x 0,6 x 0,6 m roller block Godpfx Ask Dvhdsi Neiu - Torch tripod - Speed infinitely variable - foot switch - User manual in English

Condition: new, weight max. 3000 kg workpiece diameter 20 - 1500 mm Gjdpfx Aiofv A Aie Noiu drum diameter 100 x 200 mm connected load frequency 230 V total power requirement 0,12 kW dimensions 0,8 x 0,37 x 0,36 m speed 100 - 1000 mm/min

Condition: new, weight max. 1000 Kg workpiece diameter 20 - 800 mm Gjdpfx Asvn U E Sji Noiu drum diameter 200 x 50 mm feed 50 - 2000 mm/min weight 65 kg total power requirement 0,6 kW dimensions of the machine ca. 0,8 x 0,6 x 0,6 m roller block - Torch tripod - Speed infinitely variable - foot switch - User manual in English

Condition: new, weight max. 40 t Gedpsfv A Easfx Ai Noiu workpiece diameter 600 - 4500 mm drum diameter 400 x 160 mm feed 100 - 1000 mm/min total power requirement 3 kW

Condition: new, weight max. 5 t Giodpfx Aofv A A Usi Nsu workpiece diameter 250 - 2500 mm drum diameter 250 x 100 mm feed 100 - 1000 mm/min total power requirement 0,75 kW

Condition: used, Year of construction: 2013, mobile turning device with hydraulic height and lateral displacement load capacity 8 x 150 tons component diameter 5,000 up to 12,000 mm several turning devices must be installed to weld the segments total load capacity 1,200 tons maximum steel support rollers *support rollers can be adjusted in three axes under load* - moving - roller axis:  + / - 50 mm - stroke - height adjustment: 0 bis 150 mm - thrust travel - cross adjustment: + / - 50 mm two height-adjustable drive units - type TR15 - M - year of construction 2010 Gedpjt Run Ijfx Ai Nsiu load capacity 15,000 kg per roller roller diameter 559 mm - roller width 300 mm drive torque 2 x ca. M = 3,500 Nm connected load 3 KW per drive unit manual hydraulic roller feed rotational speed stepless 100 up to 2,000 mm/min by handheld remote control second drive unit can be operated by radio remote controle The entire system is designed for transportation in nine 20ft containers for worldwide use. total weight of the plant approx. 130 to

Condition: ready for operation (used), adjustable, Giodpfxsha Hhzo Ai Nou

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 10400 € 199.68 € 20000 kg 10000 to 750 mm 4500 mm 300 mm 2 x 70 mm Conventional rotating fixtures are preferred in areas such as welding, painting and paint preparation, due to their cost-effective design and ease of integration. They are manufactured as standard with capacities ranging from 1 to 150 tons. Gsdpsx Urrnsfx Ai Neiu Roller material: Polyurethane Capacities up to 500 tons are also possible upon request.

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 8700 € 167.91 € Gijdpfsx Urrbex Ai Nju 10000 kg 5000 to 750 mm 4500 mm 300 mm 2 x 70 mm Conventional rotating fixtures are preferred in areas such as welding, painting and paint preparation, due to their cost-effective design and ease of integration. They are manufactured as standard with capacities ranging from 1 to 150 tons. Roller material: Polyurethane Capacities up to 500 tons are also possible upon request.

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 16000 € 307.2 € 20000 kg 10000 to 900 mm 4500 mm 300 mm 2 x 70 mm Rotatators are used across industries to facilitate production and simplify the assembly of tanks, drums,as well as pressure vessels and cylinders of all types and sizes. Gisdpfx Aox Urq Rsi Nju They increase speed and efficiency in both automatic and manual welding processes by increasing productivity while minimizing additional work steps and crane use. They allow the operator to control all functions, including clockwise and counterclockwise rotation, with exceptionally smooth and precise speed control. Roller material: Polyurethane Standard rotators currently cover load capacities from 5 to 150 tons. Capacity can be expanded up to 250 to upon request.

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 13200 € 253.44 € 10000 kg 5000 to 900 mm 4500 mm 300 mm 2 x 70 mm Rotatators are used across industries to facilitate production and simplify the assembly of tanks, drums,as well as pressure vessels and cylinders of all types and sizes. They increase speed and efficiency in both automatic and manual welding processes by increasing productivity while minimizing additional work steps and crane use. They allow the operator to control all functions, including clockwise and counterclockwise rotation, with exceptionally smooth and precise speed control. Roller material: Polyurethane Standard rotators currently cover load capacities from 5 to 150 tons. Gedpfxsx Urp To Ai Njiu Capacity can be expanded up to 250 to upon request.

Condition: new, Year of construction: 2025, neu 2025 020177 prompt, Zwischenverkauf v Türkei 880 € 1 50 kg 0,05 to 30 mm 700 mm 100 mm 80 mm Giodpfsyq Snajx Ai Neu Without drive, idling rollers Manual adjustment of the centre distance

Condition: used, weight max. 20 t workpiece diameter 1500 - 3500 mm Godpfxjyfwyde Ai Njiu drum diameter 250 x 100 mm feed 100 - 1400 mm/min total power requirement 0,75 kW weight of the machine ca. 2,5 t Dimensions (LxWxH) 2,5 x 1,5 x 1,5 m Roller stand - Self-aligning - Forward/reverse rotation - New control system - Foot pedal - Emergency stop device

Condition: new, weight max. 5 t workpiece diameter 300 - 2500 mm drum diameter 250 x 100 mm feed 100 - 1000 mm/min total power requirement 0,75 kW weight 0,6 t dimensions 1,5 x 1,0 x 0,6 m characteristics • Self-aligning for multiple diameters • Infinitely variable speed of the drive unit • Polyurethane coating of the rollers • Optimum load distribution (4 rolls/unit), particularly gentle for workpieces with low wall thickness and sensitive surfaces • High stability due to the solid construction of the machine • CE certificate • Very good value for money Giodpfx Ajpam Hnsi Neu • Remote control on the cable • Documentation in English

Condition: new, weight max. 10 t workpiece diameter 100 - 3200 mm drum diameter 300 x 120 mm feed 100 - 1000 mm/min Gedpfxef Ep Dio Ai Nsiu total power requirement 2 x 0,55 kW