CNC travelling column boring and milling machine, travelling column milling machine with HEIDENHAIN

ANAYAK HVM-3800-P

Condition: good (used), Year of construction: 2014, operating hours: 18,520 h, Single-shaft shredder, especially suitable for secondary shredding and granulation of pre-shredded material. Application: Commercial waste for thermal or material recovery, e.g. paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Power Komet 1800 Year of manufacture: 2014 Control cabinet; complete with ABB frequency converter, Recooler Operator panel Hopper Drive motors: 200 kW Hydraulic unit: complete Total weight approx. 21 t Dimensions approx. LxWxH mm: 5000 x 2800 x 3000 mm Crsdpfx Ajwxmb Eonmef Inspection: possible upon arrangement. Delivery time: immediate.

Condition: new, Year of construction: 2026, ⭐️ CAPACITY FROM 1 TON TO 100 TONS ⭐️ ⭐️ DIMENSIONS – CUSTOM SIZE AGREED WITH THE CLIENT ⭐️ Crodpfx Aowr A Alenmsf ✅ Overhead crane, commonly called a bridge crane, eot crane, is a type of crane found in industrial environments. An overhead crane consists of parallel runways with a traveling bridge spanning the gap. A hoist, the lifting component of a crane, travels along the bridge. ✅ Usually there are include many kinds of types crane, firstly it was divided into single girder and double girder overhead crane. There are included normal type, european type, magnetic crane, grab crane, explosion proof crane, and so on. ✅ According to the different using environment and different application. We will choose the most suitable crane for customer

Condition: ready for operation (used), Year of construction: 1970, Gear hobber ZFWZ 6300x40 Manufacturer: WMW-MODUL Credpfx Aexln Iwonmof Model: ZFWZ 6300x40/1 Year of manufacture: 1970 Max. workpiece diameter: 7100 mm Gear width: 1500 mm Max. module: 45 Table diameter: 5300 mm Cutter diameter x width: 400x500 mm Max. helical angle: 45 degrees Hob diameter: 500 mm Hob speeds: 9–63 rpm Total power requirement: 47 kW Machine weight: 160 tons Equipped with standard hobbing head, tangential hobbing head, internal milling head, change gears, supports. Video available.

Condition: used, Year of construction: 2008, x-travel 2000 mm y-travel 620 mm z-travel 520 mm tool taper 2500 x 600 mm control 2000 kg tool magazin: SK40 rapid traverse HEIDENHAIN table-size 30 - 8000 U/min feed 45 m/min total power requirement 45 m/min Credpfxsulnbkj Anmsf workpiece weight max. 20 kW diameter of tools max. 10500 kg tool length - max. 5400 x 3300 x 3000 mm Equipment: - Heidenhain iTNC 530 control system - Tool magazine with 30 spaces - Chip conveyor - Screen filter system with IKZ - Operating instructions Optional (on request): - Radio probe (Heidenhain) - Tool measurement system (Heidenhain TT 160)

Year of construction: 2005, condition: used, Ulma Atlanta flowpacker - Cjdpet Uw Eqofx Anmorf

Condition: good (used), Parts on table not come. Marked with red. Credpfewxdyxjx Anmof

Condition: new, The unit is new, complete including controls, diesel tank, exhaust and batteries. Description Cjdpfx Askh Hbpsnmjrf Model: NWR35 Ricardo Motor Newpower generator generator set Continuous power: 24 kW / 30 kVA Maximum power: 26kW / 33kVA Engine : Kofo RIcardo N4100DS-30, 4 cylinder water-cooled Connection: circuit breaker Frequency : 50 Hz. Voltage: 400/230 V including mechanical speed control, AVR, battery charger, galvanized soundproofing, cooling water heater, Control unit: Comap AMF8, mains feed Dimensions: 2180x960x1260 mm Weight: approx. 900kg Diesel tank: 102 L. At 100% load: 7.15 L/h At 75% load : 5.8 L/h At 50% load : 3.7 L/h Mains monitoring, mains feed, soundproofed Ready for immediate use. Net price: €5,208, gross price: €6,197 additional costs 63A automatic switch: € 500 100A automatic switch: € 620 Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address -Available from April

Condition: excellent (used), Year of construction: 2001, turning length: 8,000 mm, turning diameter over bed slide: 2,000 mm, workpiece weight (max.): 25,000 kg, turning diameter over top slide: 1,550 mm, Swing over bed Ø: 2000mm Swing over cross slide Ø:1550mm DBC Turning Length: 8000mm Spindle bore: 150mm Spindle power: 95kW Bed width: 1400mm Tailstock spindle Ø: 260Ø Stroke pinole: 200mm Spindle taper: Metric 80Mk Workpiece weight: 25000 Power: 95A Codsxxxbzepfx Anmerf Speeds / ranges: 360Rpm Feed rate X-Axis: 0 - 6000mm/min. Feed rate Z-Axis: 0 - 6000mm/min. Length: 16000mm Width: 5000mm Height: 3800mm Weight: 80000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,600 mm, Travel ranges: Longitudinal (X): 4000 mm Vertical (Z): 1600 mm Lateral (Y): 1300 mm Rotary table: Diameter: 1600 mm Maximum speed: 250 min⁻¹ Drive power (100% duty cycle): 53 kW Maximum transport load (positioning): 8000 kg Maximum transport load (rotation): 3000 - 8000 kg Work table: Length: 4000 mm Width: 1240 mm Height of work table: 760 mm Automatically indexing milling head: Tool interface: ISO 50, DIN 69871 AD Automatic tool clamping: Clamping force 20000 N Spindle speed range: Spindle speed: 20 - 5000 min⁻¹ Full power from 340 min⁻¹ Torque at 32 kW/S1: 900 Nm Crodpszi S E Uofx Anmjf Main drive: Drive power: 43 kW Maximum rapid traverse rate: X-axis 45000 mm/min Y- and Z-axis 35000 mm/min Maximum feed force: X, Y and Z-axis 16000 N Automatic tool changer Magazine positions in M version: Maximum tool positions: SK 50 40 positions Maximum tool positions: Capto C8 20 positions Machine weight: approx. 32,100 kg Equipment: - Work table 4000 x 1240 x 760 mm with integrated rotary table Ø 1600 mm - Swiveling control panel with telescopic arm with HEIDENHAIN TNC 640 HSCI (6 axes + spindle) control, including 19" flat screen, metallic keyboard with integrated mouse and USB interface on the control panel. Processor speed 0.5 ms including HEIDENHAIN smarT.NC. - Interpolative turning with HEIDENHAIN TNC 640 HSCI consisting of CAM system, HEIDENHAIN postprocessor, software adaptation for C-axis (spindle). - Portable electronic hand-held unit HEIDENHAIN HR 520 with 5 m cable. - Automatically indexing milling head / 2 levels with 2.5° x 2.5° division and a tool clamping force of 20,000 N (H200), 32 kW / 900 Nm, tool interface ISO 50 - DIN 69871 AD. Mounting flange with Hirth gearing for adapting turning tool holders, grinding spindles or additional milling heads and a protective ring to cover the Hirth gearing; not required if H205 is selected. - Spindle drive 43 kW at 100% duty cycle via water-cooled HEIDENHAIN inline motor with direct power transmission. The motor is integrated into the milling slide. - Turning tool holder with Capto C8 interface (manual tool clamping) for turning operations incl. Hirth gearing and SK 50 interface according to DIN 69871 AD for adaptation to SORALUCE milling heads. (Semi-automatic changing with additional manual fastening by 8 x M8 screws); not required with fully automatic changing of the turning tool holder. - Pneumatically adjustable pick-up station (travel 500 mm) in the tool changer area for the turning tool holder and protective ring for semi-automatic changing. - Work table with integrated NC rotary table Ø 1,600 mm, for turning operations and for positioning operations with hydraulic clamping. - Rack and pinion drive in the X-axis via two servomotors controlled in a master-slave process.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, 5-AXIS MACHINING CENTER MIKRON HPM 450U + WORKPARTNER SYSTEM 3R, 115 POSITIONS, MANUFACTURED IN 2014 EQUIPPED WITH HEIDENHAIN TNC 530 ELECTRONIC HANDWHEEL TRAVEL: X 600, Y 450, Z 450, B +45º/-120º, C, X 360º SPINDLE: 20,000 RPM, 36 KW, HSK-A63 LINEAR SCALES ON X, Y, Z 120-TOOL CHANGER ROBOT SYSTEM 3R WITH 115 PALLETS Crsdpfx Ansy Twa Uomjf TOOL MEASURING PROBE WORKPIECE MEASURING PROBE PAPER FILTER SPINDLE COOLING UNIT