Travelling column milling machine

ANAYAK HVM-6000-P

Condition: ready for operation (used), Year of construction: 2004, operating hours: 8,087 h, functionality: fully functional, travel distance X-axis: 5,300 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,000 mm, spindle speed (max.): 5,000 rpm, table height: 925 mm, The machine has undergone a complete inspection, with the milling head and the telescopic cover of the X-axis repaired. Additionally, the control panel and the polycarbonate doors have been renewed, and the machine has been thoroughly cleaned. TECHNICAL DETAILS Travel distances X-axis: 5,300 mm Y-axis: 1,500 mm Z-axis: 2,000 mm A-axis: +45° to −225° B-axis: +165° to −18° Kjdoxbd A Njpfx Anwjdn Spindle data Spindle speed range: 60 – 5,000 rpm Tool holder: SK 50 DIN 69871 Spindle outer diameter (front bearing): 140 mm Spindle bore: 90 mm Table dimensions Clamping area: 6,000 × 1,200 mm Table height: 925 mm Feed rate: 10 – 6,000 mm/min Rapid traverse (X & Y): 15,000 mm/min Rapid traverse (Z): 10,000 mm/min MACHINE DETAILS Control system Manufacturer: HEIDENHAIN Model: TNC 530 Operating hours Spindle hours: 8,087 h Control system on-time: 3,785 h Machine on-time: 30,238 h Note: The machine has already been dismantled.

Condition: excellent (used), Year of construction: 2008, 5-axis simultaneous DMG DMC60U duoblock Very good condition! Operating hours: 78,000 h Spindle hours since replacement: 5,900 h (2022) 2023: XZ sliding plate replaced The machine can be inspected at any time by arrangement. Control: iTNC530 Heidenhain Travel: X-600 mm, Y-700 mm, Z-600 mm B-axis: -30 / -180° C-axis: 360 ° endless Spindle mount: SK40 Kdodjwglnyspfx Anwen Spindle speed: 20 - 12,000 rpm tool magazine: 60 seats Turntable diameter: 630 mm Pallet size: 630 mm x 630 mm Internal coolant supply (IKZ): 40 bar Belt filter system: Belt filter system equipment: Measuring probe, electric handwheel, documentation, two zero-point clamping systems; Belt filter system: Belt filter system

Condition: used, Year of construction: 2006, functionality: fully functional, center height in crank: 1,100 mm, workpiece weight (max.): 180,000 kg, grinding length: 11,000 mm, grinding wheel diameter: 1,066 mm, total length: 11,700 mm, quill travel distance: 11,700 mm, workpiece weight between centers: 180,000 g, distance between centers: 11,700 mm, POMINI CNC Roll Grinder Model HD-425-2-7L Siemens 840D, 12 Axes. Built in 2006. Two flatbed system grinding and workpiece ways are separate. Ksdpfxowdmy Ss Anwjdn Machine accuracy. Straightness 0.001-0.002 mm/m. Roundness 0.001-0.002 mm. Eccentricity 0.002 mm. Profile for crown height up to 0.1 mm ±0.002 mm/m. Surface finishing without chatter marks and no feed marks after finishing grinding stage. On an independent bed: Auto Caliper Diameter 870 - 2,250 mm. Eddy current crack and bruise detector probe. Ultrasound depth probe up to 180 mm. High Pressure wheel cleaner. Wheel dynamic balancing electromagnetic automatically or manually. Wheel dressing device with diamond. 2 Hydrostatic Steadies. 2 Hydrodynamic Steadies. 4 Soft landing for roles. Wheel quick change device incl motor. Jib crane. Vibration Measurement, recording on: Headstock base Neckrests Foot stock Wheel head Wheel head back Carriage Lateral side. Working Capacity. Grinding length 11,000 mm Max diameter with 1,066 mm Grinding wheel 2,200 mm Min diameter with 1.066 mm Grinding wheel 800 mm Center distance 11,700 mm Max Roll weight 80 Tons Max Roll weight with Steadies 180 Tons Min distance between wheel center and roll axis 845 mm Max distance between wheel center and roll axis 1,635 mm Carriage Axis Z, Hydrostatic Feeds, Infinitely variable 0-6,000 mm/min Oil film thickness 0.020 mm Distance between carriage ways 1,500 mm Ways width 160 mm Total length of the carriage on ways 3,385 mm Wheelhead on Carriage Axis X, Wheel Probe Axis A, Inspector Axis A1, Wheelhead cross travel Ballscrew, Axis X 940 mm Resolution axis X 0.0001 mm Wheel Spindle length 1,695 mm Spindle bearing, hydrostatic, diameter 254 mm Resolution Infeed micrometer handwheel, Axes X 0.00001 mm / division Continuous wheel infeed, U axis on radius 0 - 0.35 mm/min Rapid wheel indeed, axes X 0-830 mm/min Wheel motor, AC 130 kW Wheel Speed 400-1,100-1,600 rpm Wheel Cutting Speed infinitely variable Surface speed wheel diameter 1,066 mm 45 m/sec Surface speed wheel diameter 670 mm 45 m/sec Wheel hole, diameter 508 mm Wheel thickness 76 - 152 mm Wheel diameter 670 - 1,066 mm Crowning, Axis U. Max crown on the diameter 10 mm Max concavity on the diameter 10 etc Head stock Workpiece rotating speed 5 - 50 rpm Headstock motor 200 kW Max transmissible torque 76.5 kNm Faceplate control system V Belts Max Center diameter, metric type 160 mm Stroke of Quill 150 mm Length of headstock 3,110 mm Tail stock Quill diameter 260 mm Stroke of quill 750 mm Maximum center diameter, metric type 160 mm Taper Metric 5% on the diameter Tailstock length 1,300 mm Stroke of tailstock 8,000 mm Caliper, Arm Axis C, Carriage Axis V, Rotation Axis B. Max measurable diameter 2,250 mm My measurable diameter 870 mm Machine Dimensions. Machine weight 130 tons Length 19.5 m. Width 5.5 m. Height 3.2 m. Foundation depth 3.8 m.

Condition: excellent (used), Year of construction: 2008, operating hours: 35,598 h, functionality: fully functional, machine/vehicle number: 07400004031, spindle motor power: 20 W, spindle speed (min.): 3,250 rpm, spindle speed (max.): 5,000 rpm, bar passage: 90 mm, overall weight: 10,000 kg, bar capacity 90 mm - 2x12 position driven turrets - Y axis in upper turret - tail stock - Siemens 840D power line Control - machine in perfect condition that has always worked with oli - very very well tooled - Lns Sprint S2 barfeed. Kdjdpfx Anouyx Hzowen

Condition: like new (used), Year of construction: 2022, functionality: limited functionality, grinding length: 450 mm, grinding width: 150 mm, table length: 450 mm, table load: 120 kg, table width: 150 mm, grinding spindle speed: 3,000 rpm, Surface Grinding Machine from Showroom (new) Manufacturer: Okamoto Model: ACC-450 AV (open design) Year of manufacture: 2022 Control: Okamoto FX Operating hours: 0 S/N: XXXX Technical specifications: ----- • Table size: 450x150 mm • Table travel longitudinal/cross: 530x165 mm • Max. table load: 120 kg • Max. grinding height table / new wheel: 397.5 mm • Standard magnetic chuck: 450x150 mm (P=13mm) Kdsdpfsx U Dawex Anwjn • Automatic infeed: 0.0001–0.030 mm • Manual micro feed: 0.0001 / 0.001 / 0.01 mm • Spark-out strokes: 0–5 • Rapid traverse: 600 mm/min • Grinding wheel: 205 x 6–19 x 31.75 mm • Speed: 3,000 rpm • Grinding spindle motor: 1.5 kW • Connected load: 7 kVA • Dimensions: 2,000 x 1,430 x 2,265 mm • Machine weight: 1,250 kg Accessories: ----- • Grinding wheel on flange (new) • Paper band filter with 160 l tank • Table dresser + diamond • Work light • Tool kit • Operating manuals

Condition: ready for operation (used), Year of construction: 2008, Ernault Somua CNC Lathe 1400x8000 CNC system Fanuc 21i TB Kodpeyly Nbsfx Anwjdn Maximum turning diameter: 1400 mm Maximum workpiece length: 8000 mm Maximum turning diameter over cross slide: 1100 mm Spindle diameter: 235 mm Maximum workpiece weight: 25,000 kg Motor power: 75 kW Video of the machine under power available!

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: MAZATROL, controller model: Matrix, table width: 400 mm, table length: 500 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 40, number of axes: 5, This 5-axis Mazak Variaxis 500-5X II was manufactured in 2007. Ideal for complex and precise machining tasks, this vertical machining center offers versatility and reliability. If you are looking to get high-quality milling capabilities, consider the Mazak Variaxis 500-5X II machine we have for sale. Contact us for more information. Additional equipment • Swarf Conveyor Machine Benefits Technical Machine Benefits Kdedjyalk Hspfx Anwen • A-axis: -120° / +30° • C-axis: 360° Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2015, A CNC vertical long-bed machining center Mazak is available. Travel X/Y/Z: 3000mm/800mm/720mm, B-axis: 110°, C-axis: 360°, table diameter: 600mm, long-bed table dimensions X/Y: 3500mm/820mm, max. table load: 2500kg, spindle interface: BT40, speed: 18000rpm, rapid traverse: 50m/min, tool stations: 48, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5250mm/3650mm/3200mm, weight: approx. 16100kg, control: Mazatrol Matrix 2, spindle hours: 18502h. Including rotary table Nikken CNC 601MA, high-pressure coolant, center partition wall, Renishaw probe, touch probe RMP 60Q, CAD/CAM software Topsolid 7.18 and postprocessor. Documentation available. An on-site inspection is possible. Kdjdpfx Aex Ih Dmenwjn

Condition: used, grinding length 1000 mm Kdjdpsxukqyefx Anwon grinding width 750 mm workpiece height 700 mm Control SIEMENS, SIMATIC S 7-1500 table surface area 1050 x 640 mm table height over floor 1000 mm table speeds 3.000 - 30.000 mm/min cross feed of table continual 5 - 5.000 mm/min cross feed of table intermittent 0,1 - 65,0 mm vertical adjustment, 1 graduation 0,002 mm rapid traverse vertical 0,25 m/min grinding spindle speed 50 - 2.500 U/min grinding wheel size ø 400 x 50 x ø 127 mm workpiece weight max. 1.000 kg table load max. 1600 kg total power requirement 33,2 kW weight of the machine ca. 9,3 t dimensions of machine L x W x H 4,50 x 2,37 x 2,65 m - complete electronic / electric renewed in 2018 Accessories: magnetic plate 1000 x 650 mm, grinding wheel with flange, wheel trueing attachment, extraction

Condition: new, Year of construction: 2026, A 220-liter top-loading sandblaster with telescopic cylinders is a device for sandblasting and cleaning surfaces from rust, paint, greasy deposits and other impurities. The top opening significantly improves the ergonomics of working with heavy details. It is standardly equipped with a set of nozzles, a gun and glass protection stickers. A sandblaster is an essential tool in the metal, automotive, construction and shipbuilding industries. Thanks to its capacity and the stream of sand to the type of surface, the sandblaster ensures quick and effective cleaning of surfaces. The KDP220TOP sandblaster is a top quality product. It provides users with long and reliable work, and what is more, it enables quick and effective cleaning of surfaces of various types of elements. Equipped with an upper opening on telescopic actuators, it significantly improves work ergonomics and makes it easier to load heavy elements, and the capacity of 220 liters enables effective cleaning of larger surfaces in a short time. Advantages of our sandblaster model Complete for immediate use Convenient sandblasting gun with 4 replaceable ceramic nozzles Large, stable front door with rubber seal around the perimeter for safe and dust-free operation Telescopic actuators for increased work comfort High-quality rubber gloves integrated with the device Vent connection Efficient lighting of the workspace 4 pieces of replaceable protective film for the window, visor Sand blasting hose placed at the bottom of the collection container Adapted to work with various abrasives Drain hole allows for quick change of blasting material Ease of use, reliability and work safety Technical parameters Technical parameters of KDP220TOP AIR REQUIREMENTS 400-700 L/min ALLOWABLE PRESSURE 8 BAR AIR CONNECTION 1/4" quick connector ABRASIVE TANK CAPACITY +/- 18kg SUCTION CONNECTION (venting) 63mm VIEWFINDER AREA 540x250mm FRONT HEIGHT 370mm INTERIOR CABIN DIMENSIONS (LxWxH min-max) 840x550x370-550mm EXTERNAL DIMENSIONS OF THE CABIN (LxWxH min-max) 890x560x1118-1380 mm WEIGHT 49kg Technical parameters Technical parameters of the extraction unit MODEL DC23 TENSION 220V POWER 1200W UNDERPRESSURE >12Kpa INPUT DIAMETER 45mm CAPACITY ~16l Standard equipment Work area lighting - 12 V fluorescent lamp with 230 V power supply with switch 2 high-quality rubber work gloves, integrated with the device 2 suction (venting) connections with a diameter of 63 mm and 90 mm, enabling the connection of a suction device Sandblasting gun with 4 replaceable ceramic nozzles in sizes: 4, 5, 6, 7 mm 4 pcs. of replaceable protective film for window, visor Upper door with rubber seals around the perimeter to ensure dust-free operation Stable grid on the processing field Instructions in Polish Dust Extractor DC23 Connecting hose approx. 2m Bag filter Kdjdjvzqf Uopfx Anwsn We kindly inform you that the device requires self-assembly. Manufacturer: Cormak