Used tool milling machines - univ.conv. 0-399mm X-axis travel for sale (133)

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information Gsdpfozr Hrzex Amysug The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: good (used), Year of construction: 2007, Internal item no.: 26009 You are welcome to inspect the machine under power on over 500 m² of heated storage area. Universal Milling Machine Intos FN20 Year: 2007 Godpfsyg Dk Sjx Amyeug + 3-axis digital readout + Hydraulic machine vice + Operating manual + Machine lamp + Coolant pump Travel: X 300 / Y 200 / Z 350 mm Spindle taper: SK40 Speed range: 50 - 2500 rpm Clamping area of milling table: 240 x 600 mm Feed rate: 8 - 400 mm/min Rapid traverse: 1340 mm/min Dimensions (LxWxH) approx.: 130 x 150 x 190 cm Weight: approx. 1000 kg The machine comes from an educational institution and is in well-maintained condition.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Equipment: documentation/manual, F729 Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and stepless feed very good CONDITION Technical data: >> year of construction 1992 machine no. 2102-6289 >> Rigid angle table (newly planed) >> Speed: 40 - 2000 rpm Godpfx Aou T D Nromyjug >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 Bmbwuweo9T3 >> Coolant device >> Operating instructions, spare parts plan To the machine : We offer a Deckel FP1 universal milling machine built in 1992 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this machine under power on site.

Condition: used, Year of construction: 1992, Universal tool milling machine Manufacturer: MACMON Model: M 100 E Year of manufacture: 1992 - workshop tested Machine no.: 1714 Godpfxszxz Nhs Amyjug Geometric inspection with test report Accessories: - 3-axis digital display K+C Arbah-M, new - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw-in thread S 20 x 2 - Coolant system - Operating manual Used, as is, no warranty The machine is technically in the condition corresponding to the year it was manufactured.

Condition: good (used), Year of construction: 2005, Internal article no.: 24012 Universal milling machine Macmon M100 NC YEAR OF MANUFACTURE: 2005 Control: Heidenhain TNC124 + coolant pump + machine vice Travel: X 310 / Y 170 / Z 330mm Speed: 40-2000 rpm Mounting: SK40 Gujdpfx Aorywa Rsmysg LxWxH: 1200 x 1600 x 1850mm Weight: approx. 1000Kg

Year of construction: 1974, condition: like new (used), As good as new Deckel FP1 tool milling machine overhauled by FPS with 3-axis Heidenhain digital readout , Adjustable angle table , SK 40 spindle mount. Spindle brake , accessories : Counter holder , various collets. Very good working condition, can be demonstrated under power by arrangement. Guedpfx Ajq A Icqjmyeg

Condition: good (used), Year of construction: 1989, Lid FP1 Active with 3-axis Heidenhain digital readout, rigid table, SK 40 M16 spindle holder. Good working condition, ready for demonstration under power by arrangement. Gjdpjtp Nyfsfx Amysug

Year of construction: 1987, condition: good (used), Mikron WF2SA tool milling machine with 3-axis Heidenhain active digital readout. Fixed angle table, SK 40 spindle holder. Ready for operation . Machine ready for demonstration under power by arrangement. Guedpfx Amsqttt Toyog

Condition: good (used), functionality: fully functional, Feed rates continuously adjustable in all 3 axes Spindle travel 60 mm Table surface 600 x 250 mm Gusdozucrijpfx Amyeg Spindle speeds 45 - 1950 rpm Feed rates 10 – 470 mm/min...continuously adjustable... Longitudinal travel (X) 315 mm Transverse travel (Y) 180 mm Vertical travel (Z) 320 mm

Condition: good (used), Year of construction: 1995, Macmon M 100 E tool milling machine with 3-axis Elesta-Heidenhain digital display from the training department, rigid table, SK 40 spindle mount. Good working condition, can be demonstrated under power by arrangement. Guedpfx Asv Azb Njmyjg

Condition: good (used), Year of construction: 1981, Cover FP1 Active with 3 axes Heidenhain digital readout , 2 axes Active , rigid table , SK 40 S20x2 spindle holder. Good working condition, ready for demonstration under power by arrangement. Gujdouvgnqopfx Amysg

Condition: good (used), Deckel FP1 milling machine, made in Germany by Friedrich Deckel AG, Munich. The machine is operational and in working condition. For more information, please contact us. Gujdpfxow Amaij Amysg

Condition: good (used), Year of construction: 1980, Cover FP1 Active with 3 axes Heidenhain digital readout , 2 axes Active , rigid table , SK 40 S20x2 spindle holder. Good working condition, ready for demonstration under power by arrangement. Gsdoumcmqjpfx Amyeug

Condition: good (used), Year of construction: 2000, Internal article no.: 26005 Margin taxation in accordance with §25a Value Added Tax Act. You will receive a proper invoice; however, VAT is not shown separately. You are welcome to inspect the machine under power in our heated warehouse with over 500 m² of storage space. Stimin FUS-22-2M Year of manufacture: 2000 Godpfxjygv Shj Amyeug Travel distances: X 320 / Y 250 / Z 300 mm Spindle mount: ISO40 Spindle speeds: 45 - 2240 rpm Table size: 670 x 320 mm Feeds: 12.5 - 630 mm/min Drive power: 1.5 kW Quill stroke: 60 mm Total power requirement: 2.5 kW Approx. dimensions (LxWxH): 1.10 x 1.20 x 1.90 m Machine weight: approx. 1100 kg The machine comes from a training facility and is in well-maintained condition.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital display K&C, stepless feed, light gray color, CE compliant, in excellent condition. Technical data: >> Year of manufacture 1980, machine number 2101-1423 >> Fixed angular table >> Speed: 40 - 2000 rpm Godpfx Aezl Uz Djmyjug >> Stepless feed on 2 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Rapid traverse >> Travel distances X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle support, adjustable by 100 mm >> Vertical and horizontal quill - SK40 >> Clamping system M16 >> Weight approx. 700 kg Accessories and equipment: >> 3-axis digital display K&C, newly installed with manufacturer's warranty and operating manual. Display unit: Setting reference points, zero points, entering coordinates, switching between mm/inch, absolute or incremental coordinates, circular functions, hole patterns, radius milling functions, etc. >> Coolant system >> Machine lamp >> Operating manual, parts list >> Tool holders, vise, backstop About the machine: Offered is a universal milling machine Deckel FP1, CE compliant, in very good condition. The machine has very little backlash and all spindles move easily. The bellows are all new. In this newer FP1 model, the feed is steplessly adjustable on two axes, and the machine also has a rapid traverse function. An oil change has been carried out. Mechanically and electrically inspected. Thanks to the new digital display from K&C, working with the machine is easier and even more precise. Take advantage of the opportunity to inspect and test this machine on-site while it is powered on.

Condition: good (used), Year of construction: 1990, Macmon M 100 E tool milling machine with 2-axis Elesta-Heidenhain digital readout from training department , rigid table , SK 40 spindle holder. Good working condition, can be demonstrated under power by arrangement. Guodpfxerazzro Amysg

Condition: used, Universal Milling Machine DECKEL Type FP 1 Universal milling machine Machine No. 2101 – Year of manufacture: 1979 Manual travel X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 – S20x2 Spindle speed: 40–2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.5 and 1.9 kW, pole-changeable Electrical connection: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill movement at the vertical milling head: 60 mm - Vertical milling head can be swiveled and extended horizontally by 100 mm - Fixed angle table 600 x 210 mm Gusdpor U St Ujfx Amysg - Coolant system integrated in the machine base - Standalone control cabinet - Original chip tray for mounting on the machine base - Electrical schematic available Required space (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg Good condition

Condition: good (used), Stock no.: 3010 Manufacturer: Deckel Machine number: 31488 Type / Model: FP 1 Travel paths x-y-z: 300 - 150 - 340 mm Table: 600 x 200 mm Speed range: 40 to 2,000 rpm Spindle taper: MK 40 Gusdpfx Amsw D N Theysg Feeds: 16 to 500 mm/min Power supply: 1 / 1.5 kW Accessories/Equipment: Elesta digital readout Condition: good Weight: 0.8 t Dimensions: 800 x 1,000 x 1,800 mm

Condition: good (used), Year of construction: 1989, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 210 x 600 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min Gjdozrt Rkopfx Amyoug feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 730 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine comes from a training center. Equipment: 3-axis active digital readout made by Heidenhain Fixed angle table Coolant equipment

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and stepless feed, in very good condition. Accessories, CE compliant. Technical data: >> Year of manufacture 1992, machine no. 2102-7007 >> Fixed angular table >> Speed: 40 - 2000 rpm >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW Guodpfx Amszl Ebboyjg >> Spindle brake >> Travels X/Y/Z: 300/160/340 mm >> Vertical milling head, adjustable on spindle head by 100 mm >> Vertical and horizontal quill - SK40 >> Clamping system M16 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital display Heidenhain TNC113 >> Coolant system >> Machine lamp >> Operating manual, parts list >> Tool holders, vise, counter holder About the machine: Offered is a Deckel FP1 universal milling machine in very good condition and CE compliant. The machine has very little backlash and all spindles move easily. Even at maximum speeds, the milling machine runs very smoothly. A special feature is that the control cabinet is connected to the machine with a plug. This makes it easier to transport the machine. In this newer FP1 model, the feed is steplessly adjustable in three axes, and the machine also has rapid traverse in these axes. A major advantage is the active 3-axis digital display. With this Heidenhain positioning control, you can enter dimensions that the machine will automatically move to. The FP1 was used in a training workshop, where it was only used occasionally. An oil change was performed. Mechanically and electrically tested. The digital display from Heidenhain makes working easier and even more precise. Take advantage of the opportunity to inspect and test this machine on site under power.

Condition: used, Copy Milling Machine DECKEL Gjdpozku Risfx Amyjug Model: KF 1 Machine No.: 61510 Year of manufacture: 1981 Weight approx.: 1 t

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, F736 Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 Retrofit at FA Huttelmaier Very good CONDITION Technical data: >> Year of construction 1985 Machine no. 2102-2891 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm Guodpfx Aou Nvwvjmyog >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC111 >> Coolant device >> Operating instructions, spare parts plan To the machine : Universal milling machine Deckel FP1 built in 1985 in very good condition. The FP1 was overhauled by Huttelmaier in 2008. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed rate is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.

Condition: reconditioned (used), Year of construction: 1984, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 340 mm, quill stroke: 80 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, table length: 210 mm, table width: 600 mm, total height: 1,750 mm, total length: 1,400 mm, total width: 1,600 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 40 rpm, overall weight: 850 kg, table load: 200 kg, warranty duration: 3 months, The machine underwent a factory or partial overhaul by us in 2026 and is in top condition. As part of the partial overhaul, a new brake motor was installed. Control System 3-axis – active – digital display HEIDENHAIN TNC 113 Spindle Speed Guedpjyi Amwjfx Amyjg 40–2000 rpm, geometrically stepped direct drive with 18 speed levels for maximum torque and milling performance Feed Rate 5 to 500 mm/min, infinitely adjustable Rapid Traverse 1.2 m/min Quill Extendable quill, vertical 80 mm SK40 with M16 drawbar thread, optionally with DECKEL saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Axes X/Y/Z 300/150/340 mm Table Fixed angle table 600x210 mm Maximum table load: 200 kg Features • Vertical and horizontal spindle • Milling head manually swivelable +/- 90° • Z-axis bellows Options • Chip tray • Machine lamp • Universal table • Rotary table • Slotting head • Dividing head • Steady rest • etc.

Year of construction: 1990, condition: excellent (used), Mikron WF2S tool milling machine with a 3-axis Elesta-Visulesta digital display. Fixed angular table, SK 40 spindle mount. In very good, operational condition, from an institute. The machine can be demonstrated under power by arrangement. Guedpfxeg Nw Rzo Amyjg

Condition: used, Emco F3 - Milling Machine Accessories: - Vice - Workplace lighting - Coolant system - Tools & machine feet - Operating manual Technical specifications: Working area: - Longitudinal travel: 300 mm - Transverse travel: 200 mm - Vertical travel: 350 mm - Quill stroke for vertical milling spindle: 45 mm - Swiveling vertical milling head: ± 90° Clamping surface: - Table dimensions: 600 × 200 mm - 4 T-slots: 12 x 21 mm - Slot spacing: 45 mm Spindle: Gusdpfsy A Sdyox Amysg - Tool holder: DIN 2078 / SK30 - Tool clamping: extraction bolt M12 - Spindle speeds: 80 / 160 / 245 / 360 / 490 / 720 / 1100 / 2200 rpm Automatic feed for longitudinal slide: - Feed force: 1600 N (160 kp) - Speed: 20 - 200 mm/min (stepless) - Rapid traverse: 1200 mm/min Coolant system: - Tank capacity: 30 l - Pump capacity: 15 l/min Three-phase motor: - Power: 1.1 / 1.4 kW (60% duty cycle) - Speed: 1400 / 2800 rpm Dimensions: - Dimensions W x H x D: approx. 1200 x 1900 x 1400 mm - Machine weight: approx. 450 kg